Prosessien toimintolaskentalähtöinen tarkastelu Case: Neste Oil Oyj:n Suomen vähittäismyynnin toiminnot

Tutkimuksen tavoitteena on analysoida Neste Oilin Suomen vähittäismyynnin prosessit työajankäytön perusteella. Tähän perustuen pyritään löytämääntehostamista vaativia toimintoja ja prosesseja. Tutkimuksen taustalla on toimialalla toteutettu projekti, jossa toimintolaskentaa hyödyntämällä kerättiin lomakkeella työajankäytön tietokanta pullonkaulojen ja resurssien tuhlauksen paikallistamiseksi. Toimintojohtaminen ja pullonkaulateoria toimivat taustalla vaihtoehtoisina työkaluina prosessien ja toimintojen tehostamiseksi. Tämän tutkimuksen mukaan toimialalta löytyi yhdeksän erilaista pääprosessia, jotka jakaantuivat 23 erilaiseksi toimintokokonaisuudeksi, joille henkilötyövuodet kohdistettiin. Näistä asiakkuuksien hallinta sekä yhtenäinen asiakkuuskäsitys yrityksessä ovat niitä keinoja, joita tehostamalla pystytään vastaamaan kilpailuuntoimialalla, joka on yksi maailman kilpailluimmista. Lisäksi kaikkien prosessien riippuvuus tietohallinnosta pakottaa panostamaan sen tehokkuuteen sekä toimivuuteen yhä enemmän resurssien tuhlaamisen välttämiseksi kaikkialla yrityksessä.

HR-asiantuntijapalveluiden käyttö PK-yrityksissä. Case: Virvo Oy palveluiden tarjoajana

Tutkielma on kvalitatiivinen haastattelututkimus, jonka tavoitteena on tarkastella HR-asiantuntijapalveluiden;konsultoinnin, ulkoistamisen ja vuokrajohtajuuden käyttöä sekä mahdollisuuksia PK-sektorilla. Tutkimuksessa perehdytään myös työn toimeksiantajan, case-yritys Virvon liiketoimintaan HR-asiantuntijapalveluiden markkinoilla ja siihen, miten Virvo pystyy vastaamaan näihin haasteisiin. HR-asiantuntijapalveluiden markkinoiden selvittämiseksi on haastateltu neljää HR-asiantuntijaa. Tämän pohjalta on tehty 15 PK-yrityksen toimitusjohtajan haastattelua HR-asiantuntijapalveluiden käytön selvittämiseksi. Tehdyt haastattelut ovat olleet puolistrukturoituja, jolloin on käytetty valmiita kysymyspohjia. Tutkimuksessa on selvinnyt, että HR-asiantuntijamarkkinat ovat vasta muotoutumassa ja että ala on varsin uusi. PK-yritysten HR-toimintojen haasteisiin pystytään parhaiten vastaamaan HR-asiantuntijapalveluilla, jotka ovat selkeitä kokonaisuuksia ja järkevästi hinnoiteltuja. Tärkeinä asioina on nähty esimerkiksi käytännön toteutus sekä lisäajan saaminen varsinaisen liiketoiminnan hoitamiseen. Palveluiden käyttö korostuu erityisesti erilaisissa muutostilanteissa kuten esimerkiksi yrityksen kasvuvaiheessa. Voidaan todeta myös, että liiketoiminnan tila vaikuttaa HR-asiantuntijapalveluiden käyttöön.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Information System ProcessInnovation Adoption, Adaptation, Learning, and Unlearning: A Longitudinal Case Study

This thesis examines the history and evolution of information system process innovation (ISPI) processes (adoption, adaptation, and unlearning) within the information system development (ISD) work in an internal information system (IS) department and in two IS software house organisations in Finland over a 43-year time-period. The study offers insights into influential actors and their dependencies in deciding over ISPIs. The research usesa qualitative research approach, and the research methodology involves the description of the ISPI processes, how the actors searched for ISPIs, and how the relationships between the actors changed over time. The existing theories were evaluated using the conceptual models of the ISPI processes based on the innovationliterature in the IS area. The main focus of the study was to observe changes in the main ISPI processes over time. The main contribution of the thesis is a new theory. The term theory should be understood as 1) a new conceptual framework of the ISPI processes, 2) new ISPI concepts and categories, and the relationships between the ISPI concepts inside the ISPI processes. The study gives a comprehensive and systematic study on the history and evolution of the ISPI processes; reveals the factors that affected ISPI adoption; studies ISPI knowledge acquisition, information transfer, and adaptation mechanisms; and reveals the mechanismsaffecting ISPI unlearning; changes in the ISPI processes; and diverse actors involved in the processes. The results show that both the internal IS department and the two IS software houses sought opportunities to improve their technical skills and career paths and this created an innovative culture. When new technology generations come to the market the platform systems need to be renewed, and therefore the organisations invest in ISPIs in cycles. The extent of internal learning and experiments was higher than the external knowledge acquisition. Until the outsourcing event (1984) the decision-making was centralised and the internalIS department was very influential over ISPIs. After outsourcing, decision-making became distributed between the two IS software houses, the IS client, and itsinternal IT department. The IS client wanted to assure that information systemswould serve the business of the company and thus wanted to co-operate closely with the software organisations.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Product Platform Development from the Product Lines' Perspective: Case of Switching Platform

In the era of fast product development and customized product requirements, the concept of product platform has proven its power in practice. The product platform approach has enabledcompanies to increase the speed of product introductions while simultaneously benefit from efficiency and effectiveness in the development and production activities. The product platforms are technological bases, which can be used to develop several derivative products, and hence, the differentiation can be pushed closer to the product introduction. The product platform development has some specific features, which differ somewhat from the product development of single products. The time horizon is longer, since the product platform¿slife cycle is longer than individual product's. The long time-horizon also proposes higher market risks and the use of new technologies increases the technological risks involved. The end-customer interface might be far away, but there is not a lack of needs aimed at the product platforms ¿ in fact, the product platform development is very much balancing between the varying needs set to it by thederivative products. This dissertation concentrated on product platform development from the internal product lines' perspective of a singlecase. Altogether six product platform development factors were identified: 'Strategic and business fit of product platform', 'Project communication and deliverables', 'Cooperation with product platform development', 'Innovativeness of product platform architecture and features', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. From the six factors, three were found to influence quite strongly the overall satisfaction, namely 'Strategic and business fit of product platform', 'Reliability and quality of product platform', and 'Promised schedules and final product platform meeting the needs'. Hence, these three factors might be the ones a new product platform development unit should concentrate first in order to satisfy their closest customers, the product lines. The 'Project communication and deliverables' and 'Innovativeness of product platform architecture and features' were weaker contributors to the overall satisfaction. Overall, the factors explained quite well the satisfaction of the product lines with product platform development. Along the research, several interesting aspects about the very basic nature of the product platform development were found. The long time horizon of the product platform development caused challenges in the area of strategic fIT - a conflict between the short-term requirements and long term needs. The fact that a product platform was used as basis of several derivative products resulted into varying needs, and hence the match with the needs and the strategies. The opinions, that the releases of the larger product lines were given higher priorities, give an interesting contribution to the strategy theory of powerand politics. The varying needs of the product lines, the strengths of them as well as large number of concurrent releases set requirements to prioritization. Hence, the research showed the complicated nature of the product platform development in the case unIT - the very basic nature of the product platform development might be its strength (gaining efficiency and effectiveness in product development and product launches) but also the biggest challenge (developing products to meet several needs). As a single case study, the results of this research are not directly generalizable to all the product platform development activities. Instead, the research serves best as a starting point for additional research as well as gives some insights about the factors and challengesof one product development unit.

Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

Are Evaluation of ICTs Investment Using Decision Support Systems:Case Applications from Distributor's and End User's Perspective Group Decision

The evaluation of investments in advanced technology is one of the most important decision making tasks. The importance is even more pronounced considering the huge budget concerning the strategic, economic and analytic justification in order to shorten design and development time. Choosing the most appropriate technology requires an accurate and reliable system that can lead the decision makers to obtain such a complicated task. Currently, several Information and Communication Technologies (ICTs) manufacturers that design global products are seeking local firms to act as their sales and services representatives (called distributors) to the end user. At the same time, the end user or customer is also searching for the best possible deal for their investment in ICT's projects. Therefore, the objective of this research is to present a holistic decision support system to assist the decision maker in Small and Medium Enterprises (SMEs) - working either as individual decision makers or in a group - in the evaluation of the investment to become an ICT's distributor or an ICT's end user. The model is composed of the Delphi/MAH (Maximising Agreement Heuristic) Analysis, a well-known quantitative method in Group Support System (GSS), which is applied to gather the average ranking data from amongst Decision Makers (DMs). After that the Analytic Network Process (ANP) analysis is brought in to analyse holistically: it performs quantitative and qualitative analysis simultaneously. The illustrative data are obtained from industrial entrepreneurs by using the Group Support System (GSS) laboratory facilities at Lappeenranta University of Technology, Finland and in Thailand. The result of the research, which is currently implemented in Thailand, can provide benefits to the industry in the evaluation of becoming an ICT's distributor or an ICT's end user, particularly in the assessment of the Enterprise Resource Planning (ERP) programme. After the model is put to test with an in-depth collaboration with industrial entrepreneurs in Finland and Thailand, the sensitivity analysis is also performed to validate the robustness of the model. The contribution of this research is in developing a new approach and the Delphi/MAH software to obtain an analysis of the value of becoming an ERP distributor or end user that is flexible and applicable to entrepreneurs, who are looking for the most appropriate investment to become an ERP distributor or end user. The main advantage of this research over others is that the model can deliver the value of becoming an ERP distributor or end user in a single number which makes it easier for DMs to choose the most appropriate ERP vendor. The associated advantage is that the model can include qualitative data as well as quantitative data, as the results from using quantitative data alone can be misleading and inadequate. There is a need to utilise quantitative and qualitative analysis together, as can be seen from the case studies.

Integrating Financial Perspective to Quality Orientated Management System. Case: ALSTOM Finland Oy

Tutkimuksen päätavoitteena on tutkia taloudellisen näkökulman integroimista laatuajatteluun pohjautuvaan johtamisjärjestelmään esimerkkiyrityksessä. Johtamisjärjestelmän tulee tuottaa tietoa johdon strategiselle päätöksenteolle ja lisäksi täyttää laatujärjestelmän (ISO 9001:2000) asettamat vaatimukset. Tutkimuksen kohteena oleva työkalu on balanced scorecard (tasapainotettu tuloskortti). Työn tarkoituksena on ehdottaa balanced scorecard- talouden tunnuslukuja esimerkkiyritykselle. Tutkimuksen tavoitteisiin päästään empiiristä tutkimusta varten tehdyn teoreettisen viitekehyksen avulla. Empiiristä tutkimustietoa kerätään osallistuvan havainnoinnin, haastattelujen ja keskustelujen avulla. Tutkimusmenetelmänä on laadullinen case -tutkimus. Balanced scorecardin eri näkökulmille ehdotettiin tunnuslukuja empiirisen tutkimuksen pohjalta. Lisäksi talouden näkökulmaa tutkittiin tarkemmin. Tutkimuksen johtopäätöksenä esitettiin, että taloudelliset tunnusluvut mittaavat ensisijaisesti strategiaa eivätkä laatua. Lisäksi huomioitiin, että tuloskorttien tulisi olla koekäytössä ennen bonuspalkkauksen ja balanced scorecardin yhdistämistä.

Toimitusjohtajavaihdokset ja muuttunut pankkityö - case: Savonlinnan Osuuspankki 1981 - 2001

Tutkielman tavoitteena oli tarkastella Savonlinnan Osuuspankissa toteutettuja muutoksia vuosina 1981 – 2001, ja sitä, miten henkilöstö on kokenut muutokset pankkityössä. Erityisesti tarkoitus oli tutkia, miten henkilöstö on kokenut toimitusjohtajavaihdokset. Tutkielma toteutettiin teoreettis-empiirisesti. Empiirinen osuus koottiin haastattelemalla kahdeksaa pankin työntekijää. Lisäksi apuna käytettiin pankista saatavaa kirjallista materiaalia. Kolmas osa empiriasta on tutkijan oma työhistoria pankissa ja tuona aikana tehdyt havainnot. Henkilöstö suhtautuu toimitusjohtajavaihdoksiin positiivisen odottavasti. Vahva sitoutuminen organisaatioon auttaa sopeutumaan jatkuviin muutoksiin. Muutosten tarpeellisuus ymmärretään paremmin ja niihin sitoudutaan, kun tietoa muutoksen tarpeellisuudesta saadaan riittävästi, ja kun henkilöstö pääsee osallistumaan muutoksen suunnitteluun. Muutosten ansiosta henkilöstö kokee usein myös oman osaamisensa ja uransa myönteisen kehittymisen

Brandihallinta tavaramerkkihierarkian kehittämisen lähtökohtana. Case: Atria Oy

Tutkielman tarkoituksena oli ymmärtää, millä tekijöillä brandejä hallitaan. Tavoitteena oli kuvata ja analysoida Atria Oy:n tekemän kokonaisvaltaisen brandihierarkian muutos, selvittää organisaation rooli muutoksessa ja tunnistaa oikeat mitattavat tekijät brandin hallintaan. Tutkimusmenetelmä oli kvalitatiivinen. Tutkimus suoritettiin case-yrityksen avainhenkilöille sekä kahdelle ulkopuoliselle suunnittelutoimistolle. Aineiston keruu tehtiin teemahaastatteluin. Tutkimuksen perusteella brandistrategiset muutokset vaativat aikaa ja vahvaa osaamista, mutta hyvin suunniteltuna ja toteutettuna lopputuloksena on kestävä kokonaisuus. Tutkimuksen tuloksena kehitettiin malli brandihallintaan.

Johdon ja keskijohdon rekrytointiprosessin kehittäminen Suomessa Case: UPM-Kymmene Oyj

Tutkielman tarkoituksena on olla kehittämässä UPM-Kymmenen johdon ja keskijohdon rekrytointiprosessia. Tavoitteena on tutkia osaamisniukkuuden aiheuttaman riskin minimoimista, hyvien työntekijöiden palkkaamista ja kuinka työntekijät saadaan pysymään yhtiön palveluksessa. Tutkimusmenetelmä on kvalitatiivinen. Se perustuu muun muassa rekrytointiryhmän kokousten materiaaleihin ja muihin sisäisiin raportteihin sekä haastatteluun. Johdon ja keskijohdon kohdalla mahdollisia rekrytoitavia on vähän, joten heidän pysyvyytensä yrityksen palveluksessa tulee varmistaa. Uuden työntekijän löytäminen on usein vaikeaa ja rekrytointikustannukset ovat suuria. Osaamisniukkuutta voidaan välttää hyvällä henkilöstösuunnittelulla.

Tukiverkosto yrityksen perustamisessa. Case loviisalaiset yrittäjät

Tavoitteena tutkimuksessani oli saada selville, mistä pienen kaupungin uudet pienyrittäjät hakevat ja saavat neuvoja yrityksen perustamisvaiheissa. Olen myös kartoittanut yrittäjän perustamispäätöksen taustaa ja idean lähdettä. Tutkimukseni alkoi kyselylomakkeen lähettämisellä koko tutkimuksen kohdejoukolle. Tutkimusongelman hahmotuttua valitsin tutkimustavaksi teemahaastattelun. Haastattelin yhteensä yhdeksää uutta yrittäjää vuosilta 1998 ja 1999. Kohderyhmä koostui eri sukupuolta olevista ja eri ikäisistä henkilöistä. Yleisesti ottaen yrittäjien tukiverkostot olivat melko laajoja. Neuvoja haettiin ahkerimmin uusyrityskeskuksesta ja kirjanpitäjiltä. Perheellä ja tuttavilla on myös roolinsa tukiverkostossa. Näyttäisi siltä, että nuoremmat yrittäjät ovat ahkerampia neuvojen kyselijöitä kuin vanhemmat. Tutkimuksen tulosten valossa näyttäisi siltä, että uusi yrittäjä saa tarvitsemansa tuen ja avun

Prosessijohtaminen ja lyhyen aikavälin rahoitussuunnittelun kehittäminen: case Isko Oyj.

Tutkielman päätavoitteena oli kehittää kohdeyrityksen lyhyen aikavälin rahoitussuunnittelua prosessijohtamisen periaatteiden mukaisesti. Tutkimus jakaantui metodologisesti kahteen osaan: teoriaosassa käytettiin käsiteanalyyttistä tutkimusotetta ja empiriaosassa toiminta-analyyttistä tutkimusotetta. Empiirinen tutkimus toteutettiin tutkimalla kohdeyrityksen liiketoimintaprosesseja. Yksi rahoitussuunnittelun kannalta merkittävä prosessi, maahantuontiprosessi, valittiin tarkemmin kuvattavaksi ja analysoitavaksi. Yrityksen toimintaa tarkasteltaessa todettiin, että toiminnan ohjaaminen prosessijohtamisen periaatteiden mukaisesti ja rahoitussuunnittelun tunnistaminen prosessin asiakkaaksi parantaisi informaatiovirtojen laatua ja samalla lisäisi rahoitussuunnitelmien validiutta. Kohdeyrityksellä ei ole tällä hetkellä käytössään prosessiorganisaatiota. Prosessiajattelun mukaisella yrityksen tarkastelulla lisättiin yrityksen toiminnan ymmärrystä. Samalla luotiin edellytykset toiminnan kehittämiselle. Tutkimuksen tuloksena kohdeyritykselle laadittiin toimenpide-ehdotuksia maahantuontiprosessin kehittämiseksi siten, että yrityksen maksuvalmiutta pystyttäisiin paremmin suunnittelemaan ja ylläpitämään.

Yritysten väliset verkostot tietojohtamisen näkökulmasta – Case Imatran Seudun Koivukeskus

Alueellinen yrityskeskittymä sisältää monenlaisia yhteistyöverkostoja siinä toimivien yritysten välillä. Olemassa olevien verkosto- ja tietojohtamisteorioiden pohjalta yhteistyöverkostot jaettiin niiden perustehtävän mukaan kolmeen eri päätyyppiin, jotka ovat tuottaja-, kehittäjä- ja innovaatioverkosto. Tutkimusongelmana oli määrittää, voidaanko verkostoja eritellä niiden perustehtävän mukaan ja näkyykö perustehtävän erilaisuus niiden organisoitumis- ja kommunikointitavassa. Tutkimuskohteena oli kasvava puualan keskittymä, Imatran Seudun Koivukeskus. Tutkimusmenetelmänä käytettiin tapaustutkimusta ja aineistonkeruumenetelmänä teemahaastattelua. Aineistoa käsiteltiin käyttämällä menetelmänä profilointia ja teemoittelua. Tutkimuksen perusteella voitiin alueelta erottaa selvästi kolme verkostojen päätyyppiä, jotka toimivat alueella tietoa luovana, välittävänä ja soveltavana tasona. Päätyyppien välillä havaittiin eroja, kun kriteereinä käytettiin verkostojen suhteita, osaamista, tiedonkulkua ja johtajuutta. Koivukeskukselle erityisen tärkeänä verkostotyyppinä pidettiin kehittäjäverkostoa, sillä se toimii alueen sosiaalisen pääoman kasvualustana ja täten auttaa muiden verkostotyyppien kehittymistä. Mikäli kaikki päätyypit saadaan toimi-maan tehokkaasti, alueen innovaatioverkostossa syntyvät uudet prosessi- ja tuoteinnovaatiot ovat välittömästi siirrettävissä tehostamaan tuotantoa. Alueellinen yrityskeskittymä sisältää kaikkia edellä mainittuja verkostotyyppejä, ja yksittäinen toimija voi kuulua samanaikaisesti kaikkiin verkostotyyppeihin. Johtopäätöksenä esitettiin, että alueellisen yrityskeskittymän kilpailuetu syntyy alueen sisälle muodostuvien tuottaja-, kehittäjä- ja innovaatioverkoston kautta. Alueellisen yrityskeskittymän verkostopohjaisen kehittämisen avuksi kehitettiin yksinkertainen työkalu.