Merimies on erimies? Organisaatiositoutuminen suomalaisessa risteilyvarustamossa. Case: Kristina Cruises Oy

Tutkimuksen tavoitteena on selvittää, miten organisaatioon sitoutuminen moniulotteisena käsitteenä ymmärretään yrityksen johtoryhmässä ja avainesimiesten kesken, kun työpaikkana on risteilyvarustamo ja -laiva. Tutkimuksen empiirisen aineiston muodostaa viisi haastattelua laivan palveluosastoilta sekä yrityksen johtoryhmän haastattelut. Teoriaosuudessa on keskitytty kuvailemaan sitoutumiseen vaikuttavia tekijöitä ottaen huomioon kohdeorganisaation toimintaympäristö. Tässä tutkimuksessa organisaatiositoutuminen ymmärretään yksilön henkilökohtaisten tarpeiden, tunnepitoisen kiinnittymisen ja työyhteisön vaikutuksen yhteenliittymänä. Tutkimus on laadullinen ja aineiston keräystapana on käytetty pääasiallisesti teemahaastattelua. Aineistoa on täydennetty muutamalla avoimella sähköpostikyselyllä. Analysointi tapahtui teemoittelun avulla, josta johtopäätöksiin edettiin induktiivisesti. Tutkimustulosten perusteella voidaan todeta, että organisaatiositoutuminen kohdeyrityksessä on ymmärretty lähes samalla tavalla sekä johtoryhmän että esimiesten kesken. Huomioon otettavia aiheita sitouttamista silmällä pitäen ovat yrityksen arvojen ja tavoitteiden merkitys läpi koko sitoutumisprosessin.

The evaluation of hazardous gas components caused by the thermal degradation of plant oils and animal fats

Neste Oil has introduced plant oils and animal fats for the production of NExBTL renewable diesel, and these raw materials differ from the conventional mineral based oils. One subject of new raw materials study is thermal degradation, or in another name pyrolysis, of these organic oils and fats. The aim of this master’s thesis is to increase knowledge on thermal degradation of these new raw materials, and to identify possible gaseous harmful thermal degradation compounds. Another aim is to de-termine the health and environmental hazards of identified compounds. One objective is also to examine the formation possibilities of hazardous compounds in the produc-tion of NExBTL-diesel. Plant oils and animal fats consist mostly of triglycerides. Pyrolysis of triglycerides is a complex phenomenon, and many degradation products can be formed. Based on the literature studies, 13 hazardous degradation products were identified, one of which was acrolein. This compound is very toxic and dangerous to the environment. Own pyrolysis experiments were carried out with rapeseed and palm oils, and with a mix-ture of palm oil and animal fat. At least 12 hazardous compounds, including acrolein, were analysed from the gas phase. According to the experiments, the factors which influence on acrolein formation are the time of the experiment, the sphere (air/hydrogen) in which the experiment is carried out, and the characteristics of the used oil. The production of NExBTL-diesel is not based on pyrolysis. This is why thermal degradation is possible only when abnormal process conditions prevail.

Program hosting in communications environment with Reactor and thread pool approach

In this thesis concurrent communication event handling is implemented using thread pool approach. Concurrent events are handled with a Reactor design pattern and multithreading is implemented using a Leader/Followers design pattern. Main focus is to evaluate behaviour of implemented model by different numbers of concurrent connections and amount of used threads. Furthermore, model feasibility in a PeerHood middleware is evaluated. Implemented model is evaluated with created test environment which enables concurrent message sending from multiple connections to the system under test. Messages round trip times are measured in the tester application. In the evaluation processing delay into system is simulated and influence of delay to the average round trip time is analysed.

Computational and Experimental Investigation of the Grooved Roll in Paper Machine Environment

In the paper machine, it is not a desired feature for the boundary layer flows in the fabric and the roll surfaces to travel into the closing nips, creating overpressure. In this thesis, the aerodynamic behavior of the grooved roll and smooth rolls is compared in order to understand the nip flow phenomena, which is the main reason why vacuum and grooved roll constructions are designed. A common method to remove the boundary layer flow from the closing nip is to use the vacuum roll construction. The downside of the use of vacuum rolls is high operational costs due to pressure losses in the vacuum roll shell. The deep grooved roll has the same goal, to create a pressure difference over the paper web and keep the paper attached to the roll or fabric surface in the drying pocket of the paper machine. A literature review revealed that the aerodynamic functionality of the grooved roll is not very well known. In this thesis, the aerodynamic functionality of the grooved roll in interaction with a permeable or impermeable wall is studied by varying the groove properties. Computational fluid dynamics simulations are utilized as the research tool. The simulations have been performed with commercial fluid dynamics software, ANSYS Fluent. Simulation results made with 3- and 2-dimensional fluid dynamics models are compared to laboratory scale measurements. The measurements have been made with a grooved roll simulator designed for the research. The variables in the comparison are the paper or fabric wrap angle, surface velocities, groove geometry and wall permeability. Present-day computational and modeling resources limit grooved roll fluid dynamics simulations in the paper machine scale. Based on the analysis of the aerodynamic functionality of the grooved roll, a grooved roll simulation tool is proposed. The smooth roll simulations show that the closing nip pressure does not depend on the length of boundary layer development. The surface velocity increase affects the pressure distribution in the closing and opening nips. The 3D grooved roll model reveals the aerodynamic functionality of the grooved roll. With the optimal groove size it is possible to avoid closing nip overpressure and keep the web attached to the fabric surface in the area of the wrap angle. The groove flow friction and minor losses play a different role when the wrap angle is changed. The proposed 2D grooved roll simulation tool is able to replicate the grooved aerodynamic behavior with reasonable accuracy. A small wrap angle predicts the pressure distribution correctly with the chosen approach for calculating the groove friction losses. With a large wrap angle, the groove friction loss shows too large pressure gradients, and the way of calculating the air flow friction losses in the groove has to be reconsidered. The aerodynamic functionality of the grooved roll is based on minor and viscous losses in the closing and opening nips as well as in the grooves. The proposed 2D grooved roll model is a simplification in order to reduce computational and modeling efforts. The simulation tool makes it possible to simulate complex paper machine constructions in the paper machine scale. In order to use the grooved roll as a replacement for the vacuum roll, the grooved roll properties have to be considered on the basis of the web handling application.

Branding and Marketing Communications of Lifestyle Prescription Drugs in a Strict Legislative Environment

This thesis discusses the different possibilities to brand and promote a patented prescription lifestyle drug through different marketing communications practices. This thesis aims in explaining how branding procedures can be built in circumstances, where the legislative environment is strickt and furthermore, the environment consists of both B-to-B and B-to-C market characteristics simultaneously.

Suorituskyvyn analysointijärjestelmän implementointi ammattikorkeakoulussa

Ammattikorkeakoulu on asiantuntijaorganisaatio, joka tietointensiivisenä organisaationa muodostaa haastavan mittausympäristön. Tämän tutkimuksen tavoitteena oli rakentaa ammattikorkeakoulun koulutusohjelmille suorituskyvyn analysointijärjestelmä. Tutkimuksen toissijaisena tavoitteena oli suorituskyvyn mittaamisen avulla luoda perusta oikeudenmukaiselle ja tasapuoliselle palkitsemisjärjestelmälle. Tutkimuksessa käytettiin pääasiassa konstruktiivista tutkimusotetta, mutta tutkimusote voidaan nähdä vahvasti myös toiminta-analyyttisenä. Tutkimuksen teoriaosassa käsitellään suorituskyvyn analysointijärjestelmän suunnittelua ja käyttöönottoa asiantuntijaorganisaatiossa. Lisäksi perehdytään suorituskyvyn mittaamisen teoriaan ja asiantuntijaorganisaatioita käsittelevään kirjallisuuteen. Tutkimuksen käytännön osassa suorituskyvyn analysointijärjestelmä rakennettiin ja implementoitiin kolmeen case-organisaation koulutusohjelmaan. Kehitetty suorituskyvyn analysointijärjestelmä koostuu kuudesta mittausnäkökulmasta: uudistuminen ja työkyky, opetus, kansainvälisyys, T&K ja maksullinen palvelutoiminta, talous ja vaikuttavuus. Suorituskyvyn analysointijärjestelmän mittausnäkökulmiin määritettiin 16 kriittistä menestystekijää ja niitä mittaamaan valittiin 25 mittaria. Lisäksi tutkimuksessa löydettiin koulutusohjelman ja henkilöstön oikeudenmukaiseen ja tasapuoliseen palkitsemiseen soveltuvia mittareita.

Determining the location for a mobile device by utilization of local resources of the environment

The subject being analyzed of this Master’s Thesis is a development of a service that is used to define a current location of a mobile device. The service utilized data that is obtained from own GPS receiver in some possible cases and as well data from mobile devices which can be afforded for the current environment for acquisition of more precise position of the device. The computation environment is based on context of a mobile device. The service is implemented as an application for communicator series Nokia N8XX. The Master’s Thesis presents theoretical concept of the method and its practical implementation, architecture of the application, requirements and describes a process of its functionality. Also users’ work with application is presented and recommendations for possible future improvements are made.

Sustaining competitive advantage in changing environment: Case small and medium sized sawmills

The aim of this study is to examine how small and medium sized (SME) sawmills sustain their competitive advantage in the changing environment. Firstly, this study researches what changes affect SME sawmills’ competitiveness and what factors construct their competitive advantage. Secondly, this study examines how SME sawmills sustain their competitive advantage in the future and how agile and flexible they are. The theoretical part of this study represents the existing literature related to changes and competitive advantage in changing situations. The empirical part was executed as a qualitative research and it consists of thematic interviews with two SME sawmills. The results of the study indicate that several change factors affect the competitiveness of SME sawmills and therefore it is crucial to be alert on them. SME sawmills sustain their competitive advantage in the future by specialization and by being agile.

Työterveys- ja työturvallisuusriskienhallinnan kehittäminen

Työturvallisuuslaki (738/2002) asettaa vaatimuksia yrityksen suorittamalle työterveys- ja työturvallisuusriskienhallinalle ja TTT-toiminnan kehittämiselle. Organisaation tulee tunnistaa järjestelmällisesti työympäristön vaarat ja hallita niiden aiheuttamia riskejä. Taatakseen TTT-toiminnan jatkuvan kehittämisen ja lakisääteisten vaatimuksien täyttymisen organisaatiot laativat turvallisuusjohtamisjärjestelmä spesifikaatio OHSAS 18001 mukaisen TTT-järjestelmän ohjaamaan toimintaa. Työssä selvitetään, miten eräs suomalainen suuryritys on suoriutunut OHSAS 18001:fi mukaisen TTT-riskienhallintatoiminnan implementoinnista ja, mitkä ovat toiminnan suurimmat haasteet ja ongelmat. Työ pyrkii luomaan tietoa yrityksen TTT-toiminnan kehittämisen tueksi ja esittämään kehitysehdotukset toiminnassa ilmenneiden ongelmien korjaamiseksi. Teoreettisena lähtökohtana on käytetty yrityksen TTT-riskinarvioinnin ohjeistamiseksi laadittua kirjallisuutta sekä pohdittu riskienhallinnan ja turvallisuuskulttuurin vuorovaikutusta. Riskinarviointi edistää organisaation avointa raportointikulttuuria, joka on edellytys hyvän turvallisuuskulttuurin muodostumiselle. Selvityksessä havaittiin, että vastuiden ja valtuuksien epäselvyys organisaatioyksiköiden välillä ja sisällä vaikuttaa merkittävästi riskienhallinnan tehokkuuteen. Lisäksi riskinarviointitoiminta on edelleen irrallinen kokonaisuus organisaation jokapäiväisistä toiminnoista, mikä heikentää riskinarvioinnin tuloksien siirtymistä kenttätasolle.

Influence of Institutional Environment on Companies’ Innovation Activity

At the time of moving towards knowledge-based economy, countries pay much attention to innovations by making them a central issue in countries’ innovation policy development. Innovations are influenced much by the institutional environment, in which they are created. That is why exploration of National Innovation Systems, as an important part of such an environment, became central in works of different researchers all over the world.

Modeling and developing a customer-oriented configuration process in a mass customization environment

In this thesis the main objective is to examine and model configuration system and related processes. When and where configuration information is created in product development process and how it is utilized in order-delivery process? These two processes are the essential part of the whole configuration system from the information point of view. Empirical part of the work was done as a constructive research inside a company that follows a mass customization approach. Data models and documentation are created for different development stages of the configuration system. A base data model already existed for new structures and relations between these structures. This model was used as the basis for the later data modeling work. Data models include different data structures, their key objects and attributes, and relations between. Representation of configuration rules for the to-be configuration system was defined as one of the key focus point. Further, it is examined how the customer needs and requirements information can be integrated into the product development process. Requirements hierarchy and classification system is presented. It is shown how individual requirement specifications can be connected for physical design structure via features by developing the existing base data model further.

Distribution development in global business environment

The purpose of this master’s thesis was to analyze a case company’s distribution and its elements. With different distribution structure options a customer can be served with different ways. However, cost elements and service elements create different trade-offs. In this work the case company’s distribution’s present state was analyzed and conclusions were made. Based on these conclusions different alternatives for distribution were created. These different alternatives were analyzed through simulations and with more traditional calculations to compose the total operative costs of each alternative. Also other aspects were considered, such as required organizational changes and the possible better customer service. With the suggested 3-stock distribution structure shorter delivery times and possibly more punctual deliveries for products kept in stock could be achieved with the same operative costs as in current direct delivery model. Also, similar benefits could be achieved with other products with the 3-stock model.