Production Cycle Optimization: Defining the Market Potential for a New Planning Tool

An optimization tool has been developed to help companies to optimize their production cycles and thus improve their overall supply chain management processes. The application combines the functionality that traditional APS (Advanced Planning System) and ARP (Automatic Replenishment Program) systems provide into one optimization run. A qualitative study was organized to investigate opportunities to expand the product’s market base. Twelve personal interviews were conducted and the results were collected in industry specific production planning analyses. Five process industries were analyzed to identify the product’s suitability to each industry sector and the most important product development areas. Based on the research the paper and the plastic film industries remain the most potential industry sectors at this point. To be successful in other industry sectors some product enhancements would be required, including capabilities to optimize multiple sequential and parallel production cycles, handle sequencing of complex finishing operations and to include master planning capabilities to support overall supply chain optimization. In product sales and marketing processes the key to success is to find and reach the people who are involved directly with the problems that the optimization tool can help to solve.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

Developing a Comprehensive Model for Marketing Planning — Combining the Major Approaches

Mix marketing and relationships marketing are two major approaches that often form a basis for organizational marketing planning. The superiority of these approaches has been debated for long without any rational conclusion. Lately there have been studies indicating that both of the major approaches are many times used side by side in marketing planning. There have been also studies suggesting that even combining the mix marketing and relationship marketing approaches might be possible. The aim of this thesis is to provide knowledge about the usage of mix marketing and relationship marketing approaches in organizations and possibilities in combining the approaches. Also a settlement of strengths, weaknesses and risks of combining is intended to provide. The objectives were met through the literature and a case study research. In the case study, interviews were conducted in order to gain a deeper knowledge about marketing planning in various organizations. Based on this study, the combining of the major marketing approaches will be possible and even recommended when keeping in mind few aspects which might cause some troubles in the combining process.

Production planning development in global manufacturing company

Larox Corporation is a provider of full service filtration in solid and liquid separation. Larox develops, designs, manufactures and supplies industrial filters. By Larox’s continuous development principle, a project for more efficient production was started. At the same time production planning was taken under review. Aim for this Master’s thesis was to find software designed for production planning purposes replacement for old Microsoft Excel based method. In this Master’s thesis current way of production planning was thoroughly analyzed and improvement targets were specified and also requirements for new software were assigned. Primary requirements for new software were possibility to production scheduling, planning, follow-up and also for long-time capacity planning and tracking. Also one demand was that new software should have data link to Larox’s current ERP-system. Result of this Master’s thesis was to start using Larox’s ERP-system also for production planning purposes. New mode of operation fulfils all requirements which were placed to new system. By using new method of production planning, production planners can get more easier and reliable data than from current system.

Här dansar Fridolin

Soitinnus: mieskuoro.

Researching Manufacturing Planning and Control system and Master Scheduling in a manufacturing firm.

The objective of this thesis is to research Manufacturing Planning and Control (MPC) system and Master Scheduling (MS) in a manufacturing firm. The study is conducted at Ensto Finland Corporation, which operates on a field of electrical systems and supplies. The paper consists of theoretical and empirical parts. The empirical part is based on weekly operating at Ensto and includes inter-firm material analysis, learning and meetings. Master Scheduling is an important module of an MPC system, since it is beneficial on transforming strategic production plans based on demand forecasting into operational schedules. Furthermore, capacity planning tools can remarkably contribute to production planning: by Rough-Cut Capacity Planning (RCCP) tool, a MS plan can be critically analyzed in terms of available key resources in real manufacturing environment. Currently, there are remarkable inefficiencies when it comes to Ensto’s practices: the system is not able to take into consideration seasonal demand and react on market changes on time; This can cause significant lost sales. However, these inefficiencies could be eliminated through the appropriate utilization of MS and RCCP tools. To utilize MS and RCCP tools in Ensto’s production environment, further testing in real production environment is required. Moreover, data accuracy, appropriate commitment to adapting and learning the new tools, and continuous developing of functions closely related to MS, such as sales forecasting, need to be ensured.

Strike hard, strike sure - Operation Musketeer : British military planning during the Suez Crisis, 1956

Operation Musketeer, a combined joint Anglo-French operation aimed at regaining control of the Suez Canal in 1956, has received much attention from scholars. The most common approach to the crisis has been to examine the political dimension. The political events that led Prime Minister Anthony Eden’s cabinet to decide to use military force against the wishes of their superior American ally and in the face of American economic pressure and a Soviet threat to attack Paris and London with rockets have been analysed thoroughly. This is particularly the case because the ceasefire and eventual withdrawal were an indisputable defeat of British policy in the Middle East. The military operation not only ruined Prime Minister Eden’s career, but it also diminished the prestige of Britain. It was the beginning of the end, some claim. The British Empire would never be the same. As the consequences of using force are generally considered more important than the military operations themselves, very little attention has been paid to the military planning of Operation Musketeer. The difference between the number of publications on Operation Corporate of the Falklands War and Operation Musketeer is striking. Not only has there been little previous research on the military aspects of Musketeer, the conclusions drawn in the existing works have not reached a consensus. Some historians, such as Correlli Barnett, compare Musketeer to the utter failures of the Tudor landings and Gallipoli. Among significant politicians, Winston Churchill, who had retired from the prime ministership only a year before the Suez Crisis, described the operation as “the most ill-conceived and ill-executed imaginable”. Colin McInnes, a well-known author on British defence policy, represents the middle view when he describes the execution as “far from failure”. Finally, some, like Julian Thompson, the Commander of 3 Commando Brigade during the Falklands War, rate the military action itself as being successful. The interpretation of how successful the handling of the Suez Crisis was from the military point of view depends very much on the approach taken and the areas emphasised in the subject. Frequently, military operations are analysed in isolation from other events. The action of a country’s armed forces is separated from the wider context and evaluated without a solid point of comparison. Political consequences are often used as validated criteria, and complicated factors contributing to military performance are ignored. The lack of comprehensive research on the military action has left room for an analysis concentrating on the military side of the crisis.

Vesien tila hyväksi yhdessä : Vaikuta vesienhoidon työohjelmaan ja keskeisiin kysymyksiin Oulujoen-Iijoen vesienhoitoalueella 2012-2021

Vesienhoidon tavoitteena on laajan yhteistyön avulla säilyttää vesien hyvä tila sekä parantaa vesien tilaa siellä, missä se on päässyt heikentymään. Vesienhoidon suunnittelu etenee kuuden vuoden jaksoissa. Toisen suunnittelukierroksen aikana päivitetään vuonna 2009 hyväksytyt, vesienhoitoaluekohtaiset vesienhoito¬suunnitelmat ja toimenpideohjelmat laajassa yhteis-työssä ja eri tahoja kuullen. Antamalla palautetta voit vaikuttaa siihen, miten oman alueesi vesistöt, rannikkovedet ja pohjavedet sekä niiden tilaan vaikuttavat toiminnot otetaan suunnittelussa huomioon. Työohjelma ja aikataulu ovat samat kaikilla vesienhoitoalueilla. Vesienhoidon keskeiset kysymykset ja suunnittelun alueellinen organisointi vaihtelevat eri vesienhoitoalueilla. Tässä asiakirjassa käsitellään keskeisiä kysymyksiä, jotka liittyvät Oulujoen-Iijoen vesienhoitoalueen järvien, jokien, pohjavesien ja rannikkoalueiden tilan parantamiseen. Oulujoen-Iijoen vesienhoitoalue kattaa Perämereen laskevat vesistöt Kalajoelta Kuivajoelle sekä Koillismaalta itään laskevat vesistöt. Samalla maantieteellisellä alueella tarkastellaan myös pohja- ja rannikkovesiä.

Corrosion behaviour of boiler tube materials during combustion of fuels containing Zn and Pb

Många förbränningsanläggningar som bränner utmanande bränslen såsom restfraktioner och avfall råkar ut för problem med ökad korrosion på överhettare och/eller vattenväggar pga. komponenter i bränslena som är korrosiva. För att minimera problemen i avfallseldade pannor hålls ångparametrarna på en relativt låg nivå, vilket drastiskt minskar energiproduktionen. Beläggningarna i avfallseldade pannor består till största delen av element som är förknippade med högtemperaturkorrosion: Cl, S, alkalimetaller, främst K och Na, och tungmetaller som Pb och Zn, och det finns också indikationer av Br-förekomst. Det låga ångtrycket i avfallseldade pannor påverkar också stålrörens temperatur i pannväggarna i eldstaden. I dagens läge hålls temperaturen normalt vid 300-400 °C. Alkalikloridorsakad (KCl, NaCl) högtemperaturkorrosion har inte rapporterats vara relevant vid såpass låga temperaturer, men närvaro av Zn- och Pb-komponenter i beläggningarna har påvisats förorsaka ökad korrosion redan vid 300-400 °C. Vid förbränning kan Zn och Pb reagera med S och Cl och bilda klorider och sulfater i rökgaserna. Dessa tungmetallföreningar är speciellt problematiska pga. de bildar lågsmältande saltblandningar. Dessa lågsmältande gasformiga eller fasta föreningar följer rökgasen och kan sedan fastna eller kondensera på kallare ytor på pannväggar eller överhettare för att sedan bilda aggressiva beläggningar. Tungmetallrika (Pb, Zn) klorider och sulfater ökar risken för korrosion, och effekten förstärks ytterligare vid närvaro av smälta. Motivet med den här studien var att få en bättre insikt i högtemperaturkorrosion förorsakad av Zn och Pb, samt att undersöka och prediktera beteendet och motståndskraften hos några stålkvaliteter som används i överhettare och pannväggar i tungmetallrika förhållanden och höga materialtemperaturer. Omfattande laboratorie-, småskale- och fullskaletest utfördes. Resultaten kan direkt utnyttjas i praktiska applikationer, t.ex. vid materialval, eller vid utveckling av korrosionsmotverkande verktyg för att hitta initierande faktorer och förstå deras effekt på högtemperaturkorrosion.

Pohjoiset maisemat : "Eurooppalaisen maisemayleissopimuksen toteuttaminen Pohjois-Kalotin kunnissa" - Konferenssi Inarissa 7.-9.9.2011

Kansainvälinen Eurooppalaisen maisemayleissopimuksen tavoitteiden saavuttamista edistävä konferenssi järjestettiin Inarissa 7.-9.9.2011. Konferenssissa käsiteltiin maisemasopimuksen tavoitteita, tarpeita ja mahdollisuuksia Pohjois-Kalotin alueella. Tähän raporttiin on koottu konferenssissa esiintyneiden asiantuntijoiden laatimat artikkelit aiheesta. Raportin toivotaan helpottavan alueiden käytön suunnittelijoita käytännön työssään ja rohkaisevan kuntia toteuttamaan tulevaisuuden suunnittelua Eurooppalaisen maisemayleissopimuksen tavoitteiden mukaisesti. Raportti on saatavissa viidellä eri kielellä: suomeksi, ruotsiksi, norjaksi, pohjoissaameksi ja englanniksi. Pohjois-Kalotin aluetta yhdistää yhteinen tunnusomainen maisema. Saamelaiskulttuurin sekä poronhoidon muovaamat tunturimaisemat ja upeat jokivarsimaisemat heijastuvat ympäristössä laaja-alaisesti. Alueen maisemalle haasteita tuovat sen moninaiset maankäyttömuodot ja elinkeinot, kuten matkailu, kaivosteollisuus ja energiantuotanto. Arvokkaiden maisemapiirteiden säilyttäminen vaatii erityistä tuntemusta ja tietämystä alueen kunnissa. Maisemansuojelua ja -hoitoa toteutetaan alueiden- ja maankäytön suunnittelun kautta, pääasiallisesti kaavoituksella ja maisemanhoitosuunnitelmilla. Pohjois-Kalotin alueen kunnissa on erilaiset osin toisistaan poikkeavat toimintatavat ja käytännöt maisemanhoidossa. Kuitenkin alueen asukkailla on yhtäläisiä intressejä elinympäristönsä suojeluun ja säilyttämiseen. Maisema nähdään vetovoimatekijänä, jota ei haluta menettää. Lisääntyvät maankäyttötarpeet kunnissa luovat tarpeen entistä moniulotteisemmalle suunnittelulle. Paikallisten tahojen osallistaminen suunnitteluprosesseihin aikaisessa vaiheessa ja monimuotoinen vuorovaikutus, niin toimijoiden, kansalaisten kuin viranomaisten välillä vähentää konfliktien muodostumista. Tutkimustiedon tehokkaampi hyödyntäminen ja valtiorajat ylittävä yhteistyö helpottaa päätöksentekoa ja luo yhteisiä linjoja maisemansuojelutyöhön. Yhteiset kokemukset, käytännöt ja tietotaidon jakaminen sekä laajemman maisemakokonaisuuden hahmottaminen parantaa eurooppalaisen maisemayleissopimuksen tavoitteiden toteutumista. Työn jatkuvuuden varmistamiseksi Pohjois-Kalotin alueelle suunnitellaan perustettavaksi maisemayhteistyöryhmä, jonka tehtävä on maisemapolitiikan kehittäminen ja eteenpäin vieminen.

Northern Landscapes : ʻʻImplementation of the European Landscape Convention In the North Calotte Area Municipalitiesʼʼ - Conference in Inari, Finland 7-9.9.2011

The conference promoting the objectives of the international European Landscape Convention (ELC) was held on 7-9 September 2011 in Inari. The primary aim of the conference was to increase awareness of the ELC and the prospects and requirements it brings to practical planning work, especially at the municipal level. The conference speakers included top experts from Sweden, Norway, Finland, France, Holland and Catalonia. This report is a collection of articles written by the experts in the ELC conference. The report is available in five languages: Finnish, Swedish, Norwegian, Northern Sámi and English. The common characteristics of the North Calotte area, such as the magnificent riverside scenery and the beautiful fell landscapes formed by the Sámi culture and reindeer management are broadly reflected in the environment. Alongside the traditional forms of land use, many other livelihoods and forms of land use now need to be accommodated in the area. Tourism, energy production, mining industry and new infrastructure create new and manifold challenges to the authorities in charge of land use in these areas. Municipalities need information and support for versatile planning in the future, so that the unique and valuable characteristics of the North can be preserved. Landscape protection and management in the landscape areas is executed through areal and land use planning, mainly through town planning and the creation of landscape management plans. The municipalities in the North Calotte region have their own partly divergent methods and practices, based on the various land use processes are executed. The municipalities and inhabitants have a great interest in preserving and protecting their living environment and maintaining and increasing the appeal of the area. Landscape is viewed as one of the most significant appealing factors that cannot be lost. The increasing land use in municipalities, for example due to energy production, mining industry and increasing tourism, create a need for more multidimensional planning. The reconciliation of the wishes of different interest groups, and traditional and new livelihoods will not be easy. Conflict is inevitable. This will lead to a greater need to engage local bodies to the planning processes right from the start of the projects. Close cooperation between different administrative branches, operators, local bodies and landscape research promote the objectives of the convention. To ensure that the work continues, a landscape co-operation group is planned to be established in the North Calotte area. It´s main task is to promote and develop landscape policy in the area.