Operative level purchasing in pharmaceutical wholesale trade

Tämän tutkintotyön tavoitteena on selvittää operatiivista ostotoimintaa, joka sisältää oikea-aikaisen tilausrytmin ja tasapainoisen tilausmäärän määrityksen sekä saapuvan tavaravirran mukauttamisen myyntiin tai kulutukseen kokonaisuutena. Tässä tutkimuksessa tarkastellaan myös varastojen merkitystä ja ostotoiminnan kannalta keskeisimpiä tehokkaaseen varastonohjaukseen liittyviä tunnuslukuja. Tutkimus sisältää lääkkeiden toimitusketjun kuvauksen, koska se poikkeaa merkittävästi muista toimialoista. Tämä tutkintotyö on syntetisoiva kirjallisuustutkimus. Tutkintotyön empiirisessä osassa analysoidaan aluksi case-yrityksen vaihto-omaisuusvaraston ohjausta ostotoiminnan näkökulmasta ABC analyysiin pohjautuen. Tämän jälkeen ostotoimintaa analysoidaan tarkemmin tiettyjen toimittajien osalta. Lopuksi laaditaan optimaalinen tilausrytmi ja tilausmäärät sekä ostobudjetti yhden toimittajan tuotteille. ABC analyysia voidaan hyödyntää työkaluna määriteltäessä miten erilaisten tuotteiden materiaalivirtoja tulisi ostotoiminnan kannalta ohjata. Analyysi perustuu resurssien keskittämiseen sinne missä tuotto on suurin.

A System-Level Simulation Model for a Protocol Processor

As the development of integrated circuit technology continues to follow Moore’s law the complexity of circuits increases exponentially. Traditional hardware description languages such as VHDL and Verilog are no longer powerful enough to cope with this level of complexity and do not provide facilities for hardware/software codesign. Languages such as SystemC are intended to solve these problems by combining the powerful expression of high level programming languages and hardware oriented facilities of hardware description languages. To fully replace older languages in the desing flow of digital systems SystemC should also be synthesizable. The devices required by modern high speed networks often share the same tight constraints for e.g. size, power consumption and price with embedded systems but have also very demanding real time and quality of service requirements that are difficult to satisfy with general purpose processors. Dedicated hardware blocks of an application specific instruction set processor are one way to combine fast processing speed, energy efficiency, flexibility and relatively low time-to-market. Common features can be identified in the network processing domain making it possible to develop specialized but configurable processor architectures. One such architecture is the TACO which is based on transport triggered architecture. The architecture offers a high degree of parallelism and modularity and greatly simplified instruction decoding. For this M.Sc.(Tech) thesis, a simulation environment for the TACO architecture was developed with SystemC 2.2 using an old version written with SystemC 1.0 as a starting point. The environment enables rapid design space exploration by providing facilities for hw/sw codesign and simulation and an extendable library of automatically configured reusable hardware blocks. Other topics that are covered are the differences between SystemC 1.0 and 2.2 from the viewpoint of hardware modeling, and compilation of a SystemC model into synthesizable VHDL with Celoxica Agility SystemC Compiler. A simulation model for a processor for TCP/IP packet validation was designed and tested as a test case for the environment.

Bone Mineral Accrual in Physically Active Girls. With Special Reference to Reduction in Physical Activity Level and Use of Oral Contraceptives

Adolescence is an important time for acquiring high peak bone mass. Physical activity is known to be beneficial to bone development. The effect of estrogen-progestin contraceptives (EPC) is still controversial. Altogether 142 (52 gymnasts, 46 runners, and 42 controls) adolescent women participated in this study, which is based on two 7-year (n =142), one 6-year (n =140) and one 4-year (n =122) follow-ups. Information on physical activity, menstrual history, sexual maturation, nutrition, living habits and health status was obtained through questionnaires and interviews. The bone mineral density (BMD) and content (BMC) of lumbar spine (LS) and femoral neck (FN) were measured by dual- energy X-ray absoptiometry. Calcaneal sonographic measurements were also made. The physical activity of the athletes participating in this study decreased after 3-year follow-up. High-impact exercise was beneficial to bones. LS and FN BMC was higher in gymnasts than in controls during the follow-up. Reduction in physical activity had negative effects on bone mass. LS and FN BMC increased less in the group having reduced their physical activity more than 50%, compared with those continuing at the previous level (1.69 g, p=0.021; 0.14 g, p=0.015, respectively). The amount of physical activity was the only significant parameter accounting for the calcaneal sonography measurements at 6-year follow-up (11.3%) and reduced activity level was associated with lower sonographic values. Long-term low-dose EPC use seemed to prevent normal bone mass acquisition. There was a significant trend towards a smaller increase in LS and FN BMC among long-term EPC users. In conclusion, this study confirms that high-impact exercise is beneficial to bones and that the benefits are partly maintained even after a clear reduction in training level at least for 4 years. Continued exercise is needed to retain all acquired benefits. The bone mass gained and maintained can possibly be maximized in adolescence by implementing high-impact exercise for youngsters. The peak bone mass of the young women participating in the study may be reached before the age of 20. Use of low-dose EPCs seems to suppress normal bone mass acquisition.

The use of future-oriented knowledge in regional innovation processes: Research on knowledge generation, transfer and conversion

The importance of the regional level in research has risen in the last few decades and a vast literature in the fields of, for instance, evolutionary and institutional economics, network theories, innovations and learning systems, as well as sociology, has focused on regional level questions. Recently the policy makers and regional actors have also began to pay increasing attention to the knowledge economy and its needs, in general, and the connectivity and support structures of regional clusters in particular. Nowadays knowledge is generally considered as the most important source of competitive advantage, but even the most specialised forms of knowledge are becoming a short-lived resource for example due to the accelerating pace of technological change. This emphasizes the need of foresight activities in national, regional and organizational levels and the integration of foresight and innovation activities. In regional setting this development sets great challenges especially in those regions having no university and thus usually very limited resources for research activities. Also the research problem of this dissertation is related to the need to better incorporate the information produced by foresight process to facilitate and to be used in regional practice-based innovation processes. This dissertation is a constructive case study the case being Lahti region and a network facilitating innovation policy adopted in that region. Dissertation consists of a summary and five articles and during the research process a construct or a conceptual model for solving this real life problem has been developed. It is also being implemented as part of the network facilitating innovation policy in the Lahti region.

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Osaamisen johtaminen Suomen kunnissa

Kunnissa eletään muutosten aikaa, ja osaamisen johtamisella pyritään vastaamaan kehityksen mukanaan tuomiin haasteisiin. Osaamisen johtamista pidetäänkin tärkeänä asiana kuntien kehittämisessä. Viime vuosina osaamisen johtaminen on ollut voimakkaasti esillä myös yksityisellä sektorilla, jossa se on nähty tärkeänä elementtinä kilpailukyvyn kehittämisessä. Osaamisen johtaminen on toimintaa, jolla kehitetään yksilöiden ja organisaation osaamista sekä organisaation yhteistyövalmiutta. Osaamisen johtamisessa huomioidaan myös organisaatiolle asetetut strategiset tavoitteet. Tässä tutkimuksessa osaamisen johtaminen ankkuroidaan tietojohtamisen, henkilöstövoimavarojen johtamisen (HRM:n) ja oppivan organisaation viitekehyksiin. Tutkimusotteeksi on valittu kvantitatiivinen tutkimusote. Kvantitatiivinen tutkimusote mahdollistaa osaamisen johtamisen rakenteellisen analyysin ja kuvaamisen. Tutkimuksen kohderyhmänä ovat kaikki Suomen 444 kuntaa vuonna 2004. Tutkimuksen tiedonkeruu suoritettiin lomakekyselyn avulla, ja tutkimus kohdistettiin kuntien henkilöstöasioiden asiantuntijoille. Tutkimuksen keskeisenä tavoitteena oli mallintaa ja kuvata osaamisen johtamista Suomen kunnissa. Tutkimusongelma liittyy kuntien osaamisen johtamisen nykytilaan ja tavoitteisiin sekä siihen, missä vaiheissa kunnat ovat osaamisen johtamisessaan. Kyselyn avulla tutkittiin myös kuntien halukkuutta kehittää osaamisen johtamistaan. Vastausten pohjalta analysoitiin lisäksi, mitkä asiat kunnissa vaikuttavat osaamisen johtamiseen. Tutkimuksen tuloksissa tulevat esille neljä erilaista kunnissa vallitsevaa osaamisen johtamisen orientaatiota: Strategiaohjattu yhteisöllinen orientaatio, Innovatiivinen orientaatio, Teknologinen orientaatio ja Strategialähtöinen järjestelmäorientaatio. Nämä neljä orientaatiota ovat tunnistettavissa myös taustakirjallisuudessa. Kunnat ryhmiteltiin orientaatioiden perusteella neljään ryhmään, jotka nimettiin seuraavasti: Innostuneet aloittelijat, Tekniset aloittelijat, Edistyneet ja Kehittyvät. Innostuneiden aloittelijoiden ryhmässä korostuu innovatiivinen orientaatio, mutta muut osaamisen johtamisen orientaatiot tulevat esille heikosti. Teknisten aloittelijoiden ryhmässä korostuu teknologinen orientaatio, mutta muut osaamisen johtamisen orientaatiot tulevat esille heikosti. Edistyneiden ryhmässä kaikki osaamisen johtamisen orientaatiot tulevat hyvin esille. Kehittyvien ryhmässä korostuvat sekä innovatiivinen että teknologinen orientaatio. Kuntien osaamisen johtamisen nykytilanne on murroksessa. Osaamisen johtaminen on suuressa osassa kunnista hyvässä vauhdissa, mutta kehitettävääkin on. Tietotekniset välineet osaamisen johtamisessa ovat hyvät useimmissa kunnissa. Tulevaisuuden osaamistarpeina pidetään erityisesti vuorovaikutustaitoja ja oman ammattialan osaamista. Kunnissa on myös huomioitu ainakin tavoitteiden tasolla tulevaisuus ja sen tuomat haasteet.

New Distance Transforms for Gray Level Image Compression

This thesis deals with distance transforms which are a fundamental issue in image processing and computer vision. In this thesis, two new distance transforms for gray level images are presented. As a new application for distance transforms, they are applied to gray level image compression. The new distance transforms are both new extensions of the well known distance transform algorithm developed by Rosenfeld, Pfaltz and Lay. With some modification their algorithm which calculates a distance transform on binary images with a chosen kernel has been made to calculate a chessboard like distance transform with integer numbers (DTOCS) and a real value distance transform (EDTOCS) on gray level images. Both distance transforms, the DTOCS and EDTOCS, require only two passes over the graylevel image and are extremely simple to implement. Only two image buffers are needed: The original gray level image and the binary image which defines the region(s) of calculation. No other image buffers are needed even if more than one iteration round is performed. For large neighborhoods and complicated images the two pass distance algorithm has to be applied to the image more than once, typically 3 10 times. Different types of kernels can be adopted. It is important to notice that no other existing transform calculates the same kind of distance map as the DTOCS. All the other gray weighted distance function, GRAYMAT etc. algorithms find the minimum path joining two points by the smallest sum of gray levels or weighting the distance values directly by the gray levels in some manner. The DTOCS does not weight them that way. The DTOCS gives a weighted version of the chessboard distance map. The weights are not constant, but gray value differences of the original image. The difference between the DTOCS map and other distance transforms for gray level images is shown. The difference between the DTOCS and EDTOCS is that the EDTOCS calculates these gray level differences in a different way. It propagates local Euclidean distances inside a kernel. Analytical derivations of some results concerning the DTOCS and the EDTOCS are presented. Commonly distance transforms are used for feature extraction in pattern recognition and learning. Their use in image compression is very rare. This thesis introduces a new application area for distance transforms. Three new image compression algorithms based on the DTOCS and one based on the EDTOCS are presented. Control points, i.e. points that are considered fundamental for the reconstruction of the image, are selected from the gray level image using the DTOCS and the EDTOCS. The first group of methods select the maximas of the distance image to new control points and the second group of methods compare the DTOCS distance to binary image chessboard distance. The effect of applying threshold masks of different sizes along the threshold boundaries is studied. The time complexity of the compression algorithms is analyzed both analytically and experimentally. It is shown that the time complexity of the algorithms is independent of the number of control points, i.e. the compression ratio. Also a new morphological image decompression scheme is presented, the 8 kernels' method. Several decompressed images are presented. The best results are obtained using the Delaunay triangulation. The obtained image quality equals that of the DCT images with a 4 x 4

Некоторые наблюдения по поводу построения компьютерного морфологического анализатора марийского языка. [Problems in writing a two-level model of Mari morphology]

The article describes some concrete problems that were encountered when writing a two-level model of Mari morphology. Mari is an agglutinative Finno-Ugric language spoken in Russia by about 600 000 people. The work was begun in the 1980s on the basis of K. Koskenniemi’s Two-Level Morphology (1983), but in the latest stage R. Beesley’s and L. Karttunen’s Finite State Morphology (2003) was used. Many of the problems described in the article concern the inexplicitness of the rules in Mari grammars and the lack of information about the exact distribution of some suffixes, e.g. enclitics. The Mari grammars usually give complete paradigms for a few unproblematic verb stems, whereas the difficult or unclear forms of certain verbs are only superficially discussed. Another example of phenomena that are poorly described in grammars is the way suffixes with an initial sibilant combine to stems ending in a sibilant. The help of informants and searches from electronic corpora were used to overcome such difficulties in the development of the two-level model of Mari. The variation of the order of plural markers, case suffixes and possessive suffixes is a typical feature of Mari. The morphotactic rules constructed for Mari declensional forms tend to be recursive and their productivity must be limited by some technical device, such as filters. In the present model, certain plural markers were treated like nouns. The positional and functional versatility of the possessive suffixes can be regarded as the most challenging phenomenon in attempts to formalize the Mari morphology. Cyrillic orthography, which was used in the model, also caused problems. For instance, a Cyrillic letter may represent a sequence of two sounds, the first being part of the word stem while the other belongs to a suffix. In some cases, letters for voiced consonants are also generalized to represent voiceless consonants. Such orthographical conventions distance a morphological model based on orthography from the actual (morpho)phonological processes in the language.

Neuropeptide Y at the cellular level – Studies on PreproNPY L7P Polymorphism and the Mitochondrial Form of NPY

Neuropeptide Y (NPY) is a widely expressed neurotransmitter in the central and peripheral nervous systems. Thymidine 1128 to cytocine substitution in the signal sequence of the preproNPY results in a single amino acid change where leucine is changed to proline. This L7P change leads to a conformational change of the signal sequence which can have an effect on the intracellular processing of NPY. The L7P polymorphism was originally associated with higher total and LDL cholesterol levels in obese subjects. It has also been associated with several other physiological and pathophysiological responses such as atherosclerosis and T2 diabetes. However, the changes on the cellular level due to the preproNPY signal sequence L7P polymorphism were not known. The aims of the current thesis were to study the effects of the [p.L7]+[p.L7] and the [p.L7]+[p.P7] genotypes in primary cultured and genotyped human umbilical vein endothelial cells (HUVEC), in neuroblastoma (SK-N-BE(2)) cells and in fibroblast (CHO-K1) cells. Also, the putative effects of the L7P polymorphism on proliferation, apoptosis and LDL and nitric oxide metabolism were investigated. In the course of the studies a fragment of NPY targeted to mitochondria was found. With the putative mitochondrial NPY fragment the aim was to study the translational preferences and the mobility of the protein. The intracellular distribution of NPY between the [p.L7]+[p.L7] and the [p.L7]+[p.P7] genotypes was found to be different. NPY immunoreactivity was prominent in the [p.L7]+[p.P7] cells while the proNPY immunoreactivity was prominent in the [p.L7]+[p.L7] genotype cells. In the proliferation experiments there was a difference in the [p.L7]+[p.L7] genotype cells between early and late passage (aged) cells; the proliferation was raised in the aged cells. NPY increased the growth of the cells with the [p.L7]+[p.P7] genotype. Apoptosis did not seem to differ between the genotypes, but in the aged cells with the [p.L7]+[p.L7] genotype, LDL uptake was found to be elevated. Furthermore, the genotype seemed to have a strong effect on the nitric oxide metabolism. The results indicated that the mobility of NPY protein inside the cells was increased within the P7 containing constructs. The existence of the mitochondria targeted NPY fragment was verified, and translational preferences were proved to be due to the origin of the cells. Cell of neuronal origin preferred the translation of mature NPY (NPY1-36) when compared to the non neuronal cells that translated both, NPY and the mitochondrial fragment of NPY. The mobility of the mitochondrial fragment was found to be minimal. The functionality of the mitochondrial NPY fragment remains to be investigated. L7P polymorphism in the preproNPY causes a series of intracellular changes. These changes may contribute to the state of cellular senescence, vascular tone and lead to endothelial dysfunction and even to increased susceptibility to diseases, like atherosclerosis and T2 diabetes.

Managing through measurement : A framework for successful operative level performance measurement

The research around performance measurement and management has focused mainly on the design, implementation and use of performance measurement systems. However, there is little evidence about the actual impacts of performance measurement on the different levels of business and operations of organisations, as well as the underlying factors that lead to a positive impact of performance measurement. The study thus focuses on this research gap, which can be considered both important and challenging to cover. The first objective of the study was to examine the impacts of performance measurement on different aspects of management, leadership and the quality of working life, after which the factors that facilitate and improve performance and performance measurement at the operative level of an organisation were examined. The second objective was to study how these factors operate in practice. The third objective focused on the construction of a framework for successful operative level performance measurement and the utilisation of the factors in the organisations. The research objectives have been studied through six research papers utilising empirical data from three separate studies, including two sets of interview data and one of quantitative data. The study applies mainly the hermeneutical research approach. As a contribution of the study, a framework for successful operative level performance measurement was formed by matching the findings of the current study and performance measurement theory. The study extents the prior research regarding the impacts of performance measurement and the factors that have a positive effect on operative level performance and performance measurement. The results indicate that under suitable circumstances, performance measurement has positive impacts on different aspects of management, leadership, and the quality of working life. The results reveal that for example the perception of the employees and the management of the impacts of performance measurement on leadership style differ considerably. Furthermore, the fragmented literature has been reorganised into six factors that facilitate and improve the performance of the operations and employees, and the use of performance measurement at the operative level of an organisation. Regarding the managerial implications of the study, managers who operate around performance measurement can utilise the framework for example by putting the different phases of the framework into practice.

The state of research and development in Australia: implications for future development

The scale of research and development (R&D), and other technological activities, and the way in which the available resources are managed and organized at the enterprise and national level contribute to the rate of technological change in a country. A well organized national innovation system can be a powerful engine of progress, whereas a lack of interaction between institutions results in the slowing down of technological change, thereby diminishing its contribution to economic growth and welfare. The research object of this thesis is Australia’s national innovation system and the state of R&D in Australia. In order to establish an overall picture of the situation and to be able to make recommendations for future development, the general level of R&D activity and the main performers and funders of R&D within the system are analyzed. The framework policies supporting R&D and prevalent dynamics between different actors and sectors are of specific interest of the research. The findings reveal that the Australian culture is not a culture of research and innovation and that the main challenge is building a coherent system with strong domestic and international linkages.

Alueverkkojen yhteisöllisyyden edistäminen, vaihtoehtojen arviointi ja yhteisöverkkoportaalin toteutus

Internetin yhteisöpalvelut ovat saavuttaneet suuren suosion. Ne mahdollistavat digitaalisten yhteisöjen ja yhteisöllisyyden tunteiden aikaansaamisen käyttäjien välille. Kehittyneet verkkoyhteydet ja sisältötekniikat ovat antaneet mahdollisuuden monipuolisten vuorovaikutustyökalujen toteuttamiseksi. Sähköinen yhteisöllisyys on nouseva trendi, joka tukee arkipäivästä todellisuutta. Verkkojen paikallinen kehitys, niin laajakaistan kuin erilaisten alueverkkojen avulla on nostanut ajatuksia luoda myös paikallista yhteisöllisyyttä globaalien yhteisöpalvelujen rinnalle. Nopeiden alueverkkojen laajentuminen ovat tuoneet edistyneet verkkoyhteydet niin lähiöihin kuin taajamienkin ulkopuolelle. Avointen alueverkkojen mallissa verkko ja palvelukerros ovat eriytetty toisistaan. Ulkopuoliset palveluntarjoajat voivat tarjota palveluitaan suoraan alueverkon käyttäjille lähempänä verkkotasoa, verrattuna perinteiseen yhden verkkooperaattorin malliin. Tämä mahdollistaa uusien innovatiivisempien palveluiden kehittelyn. Tässä diplomityössä tutkittiin mahdollisuuksia joilla voidaan edistää yhteisöllisyyttä paikallisissa alueverkoissa ja hyödyntää niiden paikallista suorituskykyä, sekä resursseja palveluiden toteutuksessa. Työssä selvitettiin ensin mistä käsitteet yhteisö ja yhteisöllisyys ovat muodostuneet. Selvityksen pohjalta tutkittiin mitä teknisiä menetelmiä on yhteisöjen ja yhteisöllisyyden tunteen aikaansaamiseksi olemassa. Selvityksen tuloksena syntyi teknologinen tiekartta tietoverkkoyhteisöllisyyteen, sekä sosiaalisten palvelualustojen luokittelukaavio, joiden tarkoitus on yhdessä kuvastaa yhteisöllisyyttä tukevia palvelumahdollisuuksia. Työn viimeisessä vaiheessa toteutettiin yhteisöllinen alueverkkopalvelu, sekä yhteisövalvontajärjestelmä – lisäarvopalvelukonsepti, jotka pyrkivät hyödyntämään paikallisen alueverkon tarjoamaa suorituskykyä ja resursseja.

Optimizing of intelligence level in welding

The productivity, quality and cost efficiency of welding work are critical for metal industry today. Welding processes must get more effective and this can be done by mechanization and automation. Those systems are always expensive and they have to pay the investment back. In this case it is really important to optimize the needed intelligence and this way needed automation level, so that a company will get the best profit. This intelligence and automation level was earlier classified in several different ways which are not useful for optimizing the process of automation or mechanization of welding. In this study the intelligence of a welding system is defined in a new way to enable the welding system to produce a weld good enough. In this study a new way is developed to classify and select the internal intelligence level of a welding system needed to produce the weld efficiently. This classification contains the possible need of human work and its effect to the weld and its quality but does not exclude any different welding processes or methods. In this study a totally new way is developed to calculate the best optimization for the needed intelligence level in welding. The target of this optimization is the best possible productivity and quality and still an economically optimized solution for several different cases. This new optimizing method is based on grounds of product type, economical productivity, the batch size of products, quality and criteria of usage. Intelligence classification and optimization were never earlier made by grounds of a made product. Now it is possible to find the best type of welding system needed to welddifferent types of products. This calculation process is a universal way for optimizing needed automation or mechanization level when improving productivity of welding. This study helps the industry to improve productivity, quality and cost efficiency of welding workshops.