Testaushallintapalvelu SaaS-mallissa

Testaushallinta on ohjelmiston laadunvarmistusprosessin oleellinen osa, joka tarvitsee onnistuakseen työkalun. Testaushallintaohjelmiston tarjoaminen SaaS-palveluna luo mahdollisuuden tarjota tämän työkalun helposti ja kustannustehokkaasti, sekä valmiiksi määritellyin prosessein. Tässä työssä tutkitaan testaushallintaohjelmiston SaaS-palveluna tarjoamisen mahdollisuuksia ja rajoitteita pienen projektin näkökulmasta. SaaS-Palvelumallia tutkitaan osiensa muodostamana kokonaisuutena ja selvitetään mallin soveltumista testaushallintapalvelun tuottamiseen. Lisäksi tutkitaan tapaustutkimuksena kyselyn ja haastattelun avulla käyttäjien kokemuksia SaaS-palveluna toteutetun testaushallintaohjelmiston käyttämisestä. Tutkimuksen tulokset viittaavat siihen, ettei SaaS-malli luo erityisiä rajoitteita testaushallintaohjelmiston tarjoamiseen laadunvarmistusprojektin käyttöön ainakaan tutkitussa mittakaavassa. Palvelun toimintamallien suunnitteluun ja vastuiden jakoon on kiinnitettävä erityistä huomiota, jotta palvelu voidaan toimittaa loppukäyttäjien tarpeita mahdollisimman paljon huomioiden.

Järjestelmien siirtäminen uuteen käyttöjärjestelmäympäristöön

Käyttöjärjestelmän uuden version myötä vanhat ohjelmat eivät välttämättä toimi uudessa ympäristössä. Windows-käyttöjärjestelmässä sovellusten yhteensopivuus on aiemmin säilytetty melko hyvin. Uusimpiin Windows Vista ja Windows 7 -versioihin on tehty paljon tietoturvauudistuksia. Niistä johtuen vanhojen ohjelmien yhteensopivuutta on karsittu. Tässä työssä kuvataan automaatiojärjestelmän ohjelmakomponenttien siirtoa uuteen Windows-ympäristöön. Tavoitteena on saada tehtyä ohjeita muille automaatiojärjestelmän kehittäjille. Myös Windowsin tietoturvaominaisuuksiin tehdään katsaus, erityisesti pääsynhallintaan

Genetic regulatory networks in avian B cells

Biology is turning into an information science. The science of systems biology seeks to understand the genetic networks that govern organism development and functions. In this study the chicken was used as a model organism in the study of B cell regulatory factors. These studies open new avenues for plasma cell research by connecting the down regulation of the B cell gene expression program directly to the initiation of plasma cell differentiation. The unique advantages of the DT40 avian B cell model system, specifically its high homologous recombination rate, were utilized to study gene regulation in Pax5 knock out cell lines and to gain new insights into the B cell to plasma cell transitions that underlie the secretion of antibodies as part of the adaptive immune response. The Pax5 transcription factor is central to the commitment, development and maintenance of the B cell phenotype. Mice lacking the Pax5 gene have an arrest in development at the pro-B lymphocyte stage while DT40 cells have been derived from cells at a more mature stage of development. The DT40 Pax5-/- cells exhibited gene expression similarities with primary chicken plasma cells. The expression of the plasma cell transcription factors Blimp-1 and XBP-1 were significantly upregulated while the expression of the germinal centre factor BCL6 was diminished in Pax5-/- cells, and this alteration was normalized by Pax5 re-introduction. The Pax5-deficient cells further manifested substantially elevated secretion of IgM into the supernatant, another characteristic of plasma cells. These results for the first time indicated that the downregulation of the Pax5 gene in B cells promotes plasma cell differentiation. Cross-species meta-analysis of chicken and mouse Pax5 gene knockout studies uncovers genes and pathways whose regulatory relationship to Pax5 has remained unchanged for over 300 million years. Restriction of the hematopoietic stem cell fate to produce T, B and NK cell lineages is dependent on the Ikaros and its molecular partners, the closely related Helios and Aiolos. Ikaros family members are zinc finger proteins which act as transcriptional repressors while helping to activate lymphoid genes. Helios in mice is expressed from the hematopoietic stem cell level onwards, although later in development its expression seems to predominate in the T cell lineage. This study establishes the emergence and sequence of the chicken Ikaros family members. Helios expression in the bursa of Fabricius, germinal centres and B cell lines suggested a role for Helios in the avian B-cell lineage, too. Phylogenetic studies of the Ikaros family connect the expansion of the Ikaros family, and thus possibly the emergence of the adaptive immune system, with the second round of genome duplications originally proposed by Ohno. Paralogs that have arisen as a result of genome-wide duplications are sometimes termed ohnologs – Ikaros family proteins appear to fit that definition. This study highlighted the opportunities afforded by the genome sequencing efforts and somatic cell reverse genetics approaches using the DT40 cell line. The DT40 cell line and the avian model system promise to remain a fruitful model for mechanistic insight in the post-genomic era as well.

Classification, comorbidity, heredity, and risk factors of female sexual dysfunctions

Female sexual dysfunctions, including desire, arousal, orgasm and pain problems, have been shown to be highly prevalent among women around the world. The etiology of these dysfunctions is unclear but associations with health, age, psychological problems, and relationship factors have been identified. Genetic effects explain individual variation in orgasm function to some extent but until now quantitative behavior genetic analyses have not been applied to other sexual functions. In addition, behavior genetics can be applied to exploring the cause of any observed comorbidity between the dysfunctions. Discovering more about the etiology of the dysfunctions may further improve the classification systems which are currently under intense debate. The aims of the present thesis were to evaluate the psychometric properties of a Finnish-language version of a commonly used questionnaire for measuring female sexual function, the Female Sexual Function Index (FSFI), in order to investigate prevalence, comorbidity, and classification, and to explore the balance of genetic and environmental factors in the etiology as well as the associations of a number of biopsychosocial factors with female sexual functions. Female sexual functions were studied through survey methods in a population based sample of Finnish twins and their female siblings. There were two waves of data collection. The first data collection targeted 5,000 female twins aged 33–43 years and the second 7,680 female twins aged 18–33 and their over 18–year-old female siblings (n = 3,983). There was no overlap between the data collections. The combined overall response rate for both data collections was 53% (n = 8,868), with a better response rate in the second (57%) compared to the first (45%). In order to measure female sexual function, the FSFI was used. It includes 19 items which measure female sexual function during the previous four weeks in six subdomains; desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain. In line with earlier research in clinical populations, a six factor solution of the Finnish-language version of the FSFI received supported. The internal consistencies of the scales were good to excellent. Some questions about how to avoid overestimating the prevalence of extreme dysfunctions due to women being allocated the score of zero if they had had no sexual activity during the preceding four weeks were raised. The prevalence of female sexual dysfunctions per se ranged from 11% for lubrication dysfunction to 55% for desire dysfunction. The prevalence rates for sexual dysfunction with concomitant sexual distress, in other words, sexual disorders were notably lower ranging from 7% for lubrication disorder to 23% for desire disorder. The comorbidity between the dysfunctions was substantial most notably between arousal and lubrication dysfunction even if these two dysfunctions showed distinct patterns of associations with the other dysfunctions. Genetic influences on individual variation in the six subdomains of FSFI were modest but significant ranging from 3–11% for additive genetic effects and 5–18% for nonadditive genetic effects. The rest of the variation in sexual functions was explained by nonshared environmental influences. A correlated factor model, including additive and nonadditive genetic effects and nonshared environmental effects had the best fit. All in all, every correlation between the genetic factors was significant except between lubrication and pain. All correlations between the nonshared environment factors were significant showing that there is a substantial overlap in genetic and nonshared environmental influences between the dysfunctions. In general, psychological problems, poor satisfaction with the relationship, sexual distress, and poor partner compatibility were associated with more sexual dysfunctions. Age was confounded with relationship length but had over and above relationship length a negative effect on desire and sexual satisfaction and a positive effect on orgasm and pain functions. Alcohol consumption in general was associated with better desire, arousal, lubrication, and orgasm function. Women pregnant with their first child had fewer pain problems than nulliparous nonpregnant women. Multiparous pregnant women had more orgasm problems compared to multiparous nonpregnant women. Having children was associated with less orgasm and pain problems. The conclusions were that desire, subjective arousal, lubrication, orgasm, sexual satisfaction, and pain are separate entities that have distinct associations with a number of different biopsychosocial factors. However, there is also considerable comorbidity between the dysfunctions which are explained by overlap in additive genetic, nonadditive genetic and nonshared environmental influences. Sexual dysfunctions are highly prevalent and are not always associated with sexual distress and this relationship might be moderated by a good relationship and compatibility with partner. Regarding classification, the results supports separate diagnoses for subjective arousal and genital arousal as well as the inclusion of pain under sexual dysfunctions.

Det gyldne snitt : den estetiske dimensjon, en kilde til helse oget etisk anliggende

Within caring science, investigations and explorations have been carried out on the ontology of caring, and many aspects of the field have been the subject of scientific research. The main subject for this study is grounded on the human need for aesthetics. The purpose is to find how the aesthetic dimension is taken into consideration and how the aesthetic surroundings are evaluated and attended to, in the general hospitals in Norway. The theoretical perspective is founded basicly on the study of litterature from caring science and philosophy. The aim is to develop a disposition for a framework on the aesthetic surroundings in the hospitals, and to develop phenomenological and ontological knowledge and understanding of the aesthetic dimension. The study aspires to attain a deeper understanding of the aesthetic acknowledgment and of the aesthetic needs. The focus is how the aesthetic dimension can promote health and wellbeing, both for patients and for the caring staff, in the general hospitals and why the aesthetic dimension should be obligatory in `evident care¿. The study concentrates on 11 selected categories in the hospital environment, where aesthetics is of importance. The research is implemented on 5 part studies: 1. part is a study of caring science and philosophical theories about aesthetics, as a framework for the investigation. 2. part is a survey of the physical environment, in Norwegian somatic hospitals, with focus on aesthetics. This by analyzing the strategy plans for the hospitals. 3. and 4. part is questionnaires to patients and nurses to get their opinion and evaluation of the aesthetic environment in the hospitals they are connected to, and their opinion on how this influences the health and wellness for both patients and caring staff. 5. part is qualitative interviews with 16 experts, to get their opinion and evaluation of the aesthetic environment in hospitals they are or have been connected to. How would the experts like the aesthetic surroundings to be, and also their opinion on what influence they think aesthetics has on health and wellness. The main literature of caring science is rooted in K. Erikssons caring theory as well as philosophic literature; mainly I. Kant, Platon and Y. Hirn's theories on aesthetics. Various scientificresearchers of aesthetics have also been referred to. The methodological approach is a triangulation with a hermeneutic exploration, where H.G. Gadamer and Ricoeur provides the inspirational foundation. The findings and conclusions result in the development of new hypothesis for the caring science foundation and suggestions, a disposition for a framework related to future planning of the aesthetic environments in general hospitals. It might be said that a common thread arises/appears in the invariance's (invariables) that are discerned from the analysis and interpretation of the interviews and also important angles shows in the variances that crystallized. Based on the conclusions the study confirms that there is a clearconnection between health, wellness and aesthetics in the environment and that it is an ethical obligationfor those in the caring professions to be aware of and attend to the aesthetic dimension.

Mobile banking in developing countries

This Master’s thesis examines the feasibility of eBusiness in developing countries by looking at the current mobile banking solutions. The research involved reviewing literature that was relevant to the research questions. It was discovered that the Wizzit and M-PESA are the current solutions to mobile banking. Furthermore, it was found out that the Wizzit and M-PESA were either transformational or additive. Additive mobile banking is the use of mobile phones as a channel to provide services to existing customers within financial institutions. Transformational mobile banking extends financial services to the unbanked. The results of the thesis are M-PESA works with only Safaricom while on the other hand Wizzit has compatibility with any mobile operator. The other result is that both M-PESA and Wizzit are transformational mobile banking technologies at the sametime Wizzit is an Additive mobile banking technology. Wizzit can provide financial services to both the unbanked and existing bank customers. It can be said the merits of Wizzit outweigh those of M-PESA which makes Wizzit better.

RF disturbances produced by high-power photovoltaic solar plants

In this thesis, analysis of electromagnetic compatibility of high-power photovoltaic solar plant is made. Current standards suitable for photovoltaic applications are given. Measurements of antenna factor for experimental setup are shown. Also, measurements of common mode disturbance voltages in high-power solar plant are given. Importance of DC-side filter is shown. In the last part of the work, electromagnetic simulations are made. These simulations show influence of several factors to EMC of power plant. Based on these simulations and measurements recommendations are given.

Lasikuitupinnoitteiden ja vinyyliesterihartsien yhteensopivuuden tutkiminen

Diplomityössä on haettu tietoa lasikuitupinnoitteiden ja vinyyliesterihartsien yhteensopivuudesta ja sen testaamisesta. Lujitemuovikomposiitissa hartsi sitoo materiaalit yhteen ja antaa rakenteelle kemiallisen kestävyyden, sitkeyden ja välittää kuormitukset kuitujen kannettaviksi. Vaadittavan lujuuden rakenteelle antaa lasikuitu. Se päällystetään valmistusvaiheessa pinnoiteaineella, sizingilla. Sillä on ratkaiseva merkitys hartsin ja lasikuidun väliin syntyvän rajapinnan muodostumisessa kovettumisprosessin aikana. Käytännössä rajapinnan toimivuutta ja materiaalien yhteensopivuutta tutkitaan makromekaanisilla lujuustesteillä. Menetelmät perustuvat rajapinnan leikkaus¬lujuuden määrittämiseen, mutta myös murtumamekanismeihin perustuvia testi¬menetelmiä käytetään. Mikrotason menetelmät, jotka perustuvat yksittäisen kuidun ja käytetyn hartsin välisen adheesion mittaamiseen ovat yleistyneet, mutta niistä saatujen tulosten ei ole vielä todettu riittävästi korreloivan makro¬mekaanisten lujuustestien kanssa. Työssä tutkittiin kahta eri makromekaanista testimenetelmää. Testeissä havaittiin eroja valittujen lasikuitupinnoitteiden ja vinyyliesterihartsien välillä. Hauras hartsi oli herkempi lasikuitupinnoitteen kemialle. Kun yhteensopivuus vinyyli-esterihartsin ja lasikuitupinnoitteen välillä oli huono, saatiin sekä poikittaisessa vetolujuustestissä että Mode I murtumissitkeystestissä heikko tulos. Pyyhkäisy¬elektronimikroskoopilla suoritettu mikrotason analyysi murtopinnasta vahvisti saatuja tuloksia ja se osoittautui toimivaksi menetelmäksi kuvantamaan ilmiöitä, jotka vaikuttavat yhteensopivuuteen vinyyliesterihartsin ja pinnoitetun lasikuidun välillä.

Web-makrot ja käyttäjäautomaatio web-sovelluksessa: prototyypin suunnittelu ja toteutus

Tämän kandidaatintyön aiheena on web-sovelluksen käyttäjäautomaatio web-makrojen avulla. Työssä esitellään prototyyppitoteutus SaaS-sovellukseen kohdistetusta web-makrojärjestelmästä. Työn teoriaosa esittelee web-automaation ja web-ympäristön keskeisen teknologian. Ratkaisuosa pohjustaa ratkaisuun käytetyn lähestymistavan, esittelee työn prototyyppiratkaisun ja arvioi ratkaisun lopputulosta. Lopputuloksena havaitaan, että prototyyppiratkaisu onnistuu selvittämään makrotoiminnallisuuden toteuttamiseen liittyvät tekniset haasteet. Ratkaisun merkittävimmäksi tekniseksi haasteeksi arvioidaan selainyhteensopivuuden saavutus ja ylläpito. Ratkaisun hyödynnettävyys koko web-sovelluksen mittakaavassa todetaan kuitenkin heikoksi, koska sovelluksen liiketoimintalogiikka rajoittaa makroparadigman käyttöä.

Nurse-led interpersonal counselling for depressive symptoms in patients with myocardial infarction

The broad interest of this intervention study is in two worldwide remarkable diseases, myocardial infarction and depression. The purpose of the 18-month follow-up study was to evaluate the outcomes of interpersonal counselling implemented by a psychiatric nurse, and to examine the recovery experienced by the patients after myocardial infarction. The interpersonal counseling consisted of a short-term (max 6 sessions) depression-focused intervention modified for myocardial infarction patients. The main principle of interpersonal counselling is that depressive symptoms relate to interpersonal relations. The measured outcomes of the intervention consisted of changes in depressive symptoms and distress, health-related quality of life and the use of health care services. The data consisted of 103 patients with acute myocardial infarction and with sufficient knowledge of Finnish language, and they were randomized into intervention group (n=51) and control group (n=52) with standard care. Depressive symptoms were measured using Beck Depression Inventory, and distress using Symptom Checklist-25. The instrument to measure health-related quality of life was EuroQol-5 Dimensions. All instruments were used at three measurements: in hospital, at 6 months and at 18 months after hospital discharge. The Use of Health Care Services questionnaire was used during the 6- and 18-month period after hospital discharge. In addition, satisfaction with the intervention and with information received from the health-care professional was evaluated during the follow-up. To examine recovery, the patients kept diaries during a 6-month period and they were interviewed at 18 months after myocardial infarction. The number of patients with depressive symptoms decreased significantly more in the intervention group compared with the control group during 18 months of follow-up. Distress decreased significantly more among patients under 60 years in the intervention group than in the control group, but the difference was not significant between the groups. No differences in the changes of health-related quality of life were found between the groups during follow-up. However, in the group of patients under 60 years, the improvement of health-related quality of life in the intervention was significantly better in the intervention group compared with the control group during the follow-up. During the follow-up period, there was even a decline in the use of somatic specialized health care services in the intervention group and among intervention patients who had no other long-term disease. Considering recovery experienced by the patients, main categories including many supporting and inhibiting factors and subcategories were identified: clinical and physical, psychological, social, functional and professional category. No differences between the groups were found in satisfaction with information received from the professionals. The brief and easy-to-learn intervention, with which the patients were satisfied, seems to decrease depressive symptoms after myocardial infarction. Interpersonal counselling seems to be beneficial especially with younger patients. These results justify adopting depression screening and interpersonal counselling as part of routine care after myocardial infarction. The first stage evaluation of the use of health care services is interesting, and calls for more studies. From the perspective of individual patients, recovery after myocardial infarction seems to consist of many supporting and inhibiting factors. This is something that is important to take into account in developing nursing practice. The results indicate a need for further studies in outcomes of interpersonal counselling and recovery experienced by the patients after myocardial infarction. In addition, the results encourage widening the research perspective to nursing administration and educational level.

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.

Tavaran toimitusasiakirjojen sähköistäminen

Tutkielman tavoitteena on selvittää sähköisten tavaran toimitusasiakirjojen käytön vaikutukset hankinta- ja logistiikkapalveluita tarjoavan yrityksen toimitusketjun loppupään toimintoihin. Lisäksi työssä rakennetaan konstruktiivisen tutkimusmenetelmän viitekehyksen mukainen toimintamalli yrityksen käyttöä varten. Toimintamallin avulla tarkastellaan kohdeyrityksen mahdollisuutta parantaa toimitusketjun läpinäkyvyyttä, tehostaa sidosryhmien välistä tiedonsiirtoa ja vähentää virheitä ja manuaalista työtä nykyisissä prosesseissa. Työn keskeisin sisältö rakentuu kohdeyrityksen käyttämille kuljetusyrityksille tehdyn kuljetusliikekyselyn, tarkkaan kuvatun nykytilan sekä käytännön ongelmaan rakennetun konstruktion ympärille. Kuljetusliikekyselyn avulla saadaan käyttökelpoinen kuva kuljetusyritysten nykytilasta sekä tulevaisuuden suunnitelmista sähköisiin tavaran toimitusasiakirjoihin liittyen. Nykytilan kuvauksella nostetaan esiin prosesseja ja toimintoja joiden toimintaan voidaan oleellisesti vaikuttaa informaatioteknologian sekä prosessimuutosten avulla. Konstruktion rakentamisessa pääpaino on suunnattu läpinäkyvän ja tehokkaan toimitusketjun aikaansaamisessa. Tutkielman konstruktiota, sähköisten tavaran toimitusasiakirjojen toimintamallia, tarkastellaan yrityksen liiketoiminnan näkökulmasta peilaamalla oletettuja parannuksia aikaisempaan teoriapohjaan. Lisäksi toimintamallin soveltumista reaalimaailman ongelman ratkaisuun arvioidaan diplomityön ohjausryhmästä koostuvan johtajapaneelin tekemällä SWOT-analyysillä sekä heikolla markkinatestillä. Sidosryhmien välisen toiminnan tehostumista arvioidaan kvalitatiivisin menetelmin

Kantavan modulaarisen kehikkorakenteen suunnittelu optimoiduksi tuotteeksi

Diplomityössä tavoitteena oli suunnitella kantava modulaarinen kehikkorakenne, joka soveltuu käytettäväksi erilaisissa tasoratkaisuissa. Suunnittelumetodina käytettiin järjestelmällistä tuotesuunnittelua. Rakenteen tuli olla modulaarinen, valmistettavissa laserleikkaamalla ja toteutettu ruuviliitoksilla. Lisäksi kehikkorakenteen suunnittelussa pyrittiin optimaalisimpaan ratkaisuun niin teknisen kuin taloudellisenkin toteutuksen kannalta. Premekon Oy investoi vuonna 2009 laserleikkuukeskukseen, jossa pystytään leikkaamaan levyjä ja palkkeja. Yhdessä oikeanlaisen tuotesuunnittelun kanssa laserleikkuukeskuksella pystytään valmistamaan tuotteita suurella tuotantotehokkuudella. Kantavan modulaarisen kehikkorakenteen kehittäminen mahdollisti laserleikkuun aiempaa tehokkaamman hyödyntämisen. Työssä tarkasteltiin yksityiskohtaisemmin erilaisten profiilien soveltuvuutta laserleikattavaksi, osien muotoilua, liitosten yhteensopivuutta ja lujuutta.

Pluripotency and genetic stability of human pluripotent stem cells

Pluripotent cells have the potential to differentiate into all somatic cell types. As the adult human body is unable to regenerate various tissues, pluripotent cells provide an attractive source for regenerative medicine. Human embryonic stem cells (hESCs) can be isolated from blastocyst stage embryos and cultured in the laboratory environment. However, their use in regenerative medicine is restricted due to problems with immunosuppression by the host and ethical legislation. Recently, a new source of pluripotent cells was established via the direct reprogramming of somatic cells. These human induced pluripotent stem cells (hiPSCs) enable the production of patient specific cell types. However, numerous challenges, such as efficient reprogramming, optimal culture, directed differentiation, genetic stability and tumor risk need to be solved before the launch of therapeutic applications. The main objective of this thesis was to understand the unique properties of human pluripotent stem cells. The specific aims were to identify novel factors involved in maintaining pluripotency, characterize the effects of low oxygen culture on hESCs, and determine the high resolution changes in hESCs and hiPSCs during culture and reprogramming. As a result, the previously uncharacterized protein L1TD1 was determined to be specific for pluripotent cells and essential for the maintenance of pluripotency. The low oxygen culture supported undifferentiated growth and affected expression of stem cell associated transcripts. High resolution screening of hESCs identified a number of culture induced copy number variations and loss of heterozygosity changes. Further, screening of hiPSCs revealed that reprogramming induces high resolution alterations. The results obtained in this thesis have important implications for stem cell and cancer biology and the therapeutic potential of pluripotent cells.

Kytkentäaineet puumuovikomposiiteissa

Puumuovikomposiittien valmistuksessa yhdistetään kaksi toisistaan eroavaa materiaalia jolloin saadaan aikaan materiaalien ominaisuuksien ainutlaatuinen yhdistelmä. Polymeerimateriaaleina käytetään pääasiassa erilaisia kestomuoveja. Kuitumateriaaleina voidaan käyttää puujauhetta, sahanpurua, paperin- ja kartongin valmistuksessa käytettävää sellua, nanoselluloosaa tai muita puukuitumateriaaleja. Polaarisen puukuidun ja polaarittoman muovimateriaalin välinen materiaalien rajapinnan adheesio on yleensä riittämätöntä, mikä vaikuttaa lopputuotteen ominaisuuksien heikkenemiseen. Kyseinen ongelma on pyritty ratkaisemaan käyttämällä erilaisia kytkentäaineita. Tässä työssä keskitytään käsittelemään erilaisia puumuovikomposiittien kytkentäaineita, niiden toimintaa sekä vaikutuksia lopputuotteeseen. Lisäksi työssä esitellään myös puumuovikomposiittien valmistusmateriaaleja ja valmistusprosesseja.