Kostean höyryn paisunnan erityispiirteet ydinvoimalaitosten turbiineissa

Diplomityössä käsitellään ydinvoimalaitoksen kostean höyryn alueella toimivien höyryturbiinien toiminnan erityispiirteitä. Tarkemmin työssä keskitytään Loviisan ydinvoimalaitoksen turbiiniprosessiin. Tavoitteena on selvittää veden tiivistymistä höyryvirrassa, sen erotusta höyrystä turbiineissa sekä määrittää laitokselle todellinen paisuntakäyrä. Työssä selvitettiin veden tiivistymistä höyryvirtaan kirjallisuuden ja prosessista saatujen tietojen perusteella. Lisäksi työssä tutustuttiin suurien nykyaikaisten kostean höyryn alueella toimivien turbiinien vedenerotukseen ja sen pohjalta arvioitiin Loviisan ydinvoimalaitoksen turbiinin kosteudenerotusta. Näiden tietojen avulla saatiin mallinnettua kostean höyryn paisuntakäyrä Loviisan ydinvoimalaitoksen turbiineille. Työssä perehdyttiin lisäksi ulosvirtauskanavan toimintaan. Diplomityön puitteissa ei perehdytty yksityiskohtaisesti veden tiivistymiseen höyryvirrassa, vaan aihe ansaitsee tarkempaa tutkimusta. Kosteuden erotustehokkuuden arviointi todellisessa prosessissa ilman mittauksista saatavaa tietoa on vaikeata, mutta toimenpiteisiin lisäinformaation saamiseksi Loviisan ydinvoimalaitoksen turbiiniprosessista on ryhdytty. Työssä tehtyjen selvitysten avulla saatiin arvokasta tietoa turbiinikoneikon toiminnasta ja sen tehokkuuden parantamisesta.

Osakeyhtiölain mukaiset edellytykset valtio-omistajan tahdon toteuttamiseen yhtiön johdossa

Tutkielman tavoitteena on kuvata valtio-omistajan vaikutusmahdollisuudet ja vaikuttamiskeinot valtioenemmistöisen osakeyhtiön hallintoon voimassa olevan osakeyhtiölain mukaisesti. Tutkielmassa paneudutaan osakeyhtiön johdon tehtävien ja velvollisuuksien lisäksi valtion rooliin ja asemaan yhtiön omistajana sekä selvitetään valtion omistajavallan jakautumista valtiollisten toimijoiden välillä. Tutkimusmetodina on käytetty oikeusdogmatiikkaa. Tutkielman pääasiallisena lähdeaineistona on voimassa oleva lainsäädäntö valmisteluaineistoineen. Lisäksi lähteinä on käytetty kotimaista oikeuskirjallisuutta, viranomaisten ohjeistuksia ja kannanottoja sekä ajankohtaisia asiantuntija-artikkeleita. Osakeyhtiö on nykyisin tyypillisin yritysmuoto liiketoiminnan harjoittamiseen myös valtion omistamana. Valtio omistaa merkittävästi osakkeita hyvin erityyppisissä yhtiöissä ja hyvin erisuuruisin osuuksin. Enemmistöosakkeenomistajuus tuo käytännössä valtiolle päätösvallan yhtiökokouksessa yhtiön merkittävistä ja laajakantoisista asioista strategisista linjauksista ja hallituksen jäsenten valinnasta päätettäessä. Jo yhtiötä perustettaessa valtio enemmistöosakkaana voi määrätä yhtiöjärjestyksessä melko vapaasti yhtiön tarkoituksesta ja hallinnon järjestämisestä. Hallitus ja toimitusjohtaja toimivat omistajan tahdon ja yhtiön tarkoituksen mukaisesti, mutta kuitenkin itsenäisesti yhtiön edun parhaaksi. Valtio-omistajuus ei tarkoita osakeyhtiön hallinnon ja toiminnan erilaisuutta muihin yhtiöihin nähden, vaan yhtiö toimii hyvän hallintotavan mukaisesti liiketoimintaperiaattein, johon myös valtion omistajaohjauksella pyritään.

Outsourcing process in pharmaceutical product development

The aim of this study was to create an outsourcing process for pharmaceutical product development. This study focuses on two main questions. The first question is “What is the outsourcing process model?” In the second phase key success factors of the outsourcing process are identified. As a result of the literature reviews, a general outsourcing process was created. Transaction cost economics and resource based view were used to derived a theoretical framework to the process by combining the existing processes presented in the literature. The model of process is considered used to the outsourcing broadly. The general outsourcing process was then developed further with the key factors that affect the success of pharmaceutical product development and the interviews of pharmaceutical outsourcing experts. The result of the research was the process consists of seven phases with key activities and expected outputs for each of the phases. In addition, the strategic decision-making framework for outsourcing decision in pharmaceutical product development is giving as well as the tools for selecting supplier and preparing structured contract. This study also gives some recommendations for managing the outsourcing process.

Makt som fullmakt : ett vårdvetenskapligt perspektiv

The aim of this study is to deepen understanding and knowledge of the concepts and phenomenaof power and authority from the standpoint of caring science. The overall questions of the research are: What is power? What is authority? How do power and authority manifest themselves in the context of caring? How are power and authorityto be understood as caring science concepts? The overall research inception is determination of the concepts in accordance with the hermeneutic approach based on Eriksson's model. The process of understanding follows Gadamer's (1999) hermeneutics. The thesis consists of three part studies. An ontological determinationof the character of the concepts is carried out where a hermeneutic interpretation is made of texts in the Old and the New Testaments in the Bible. The pragmatic features of the concepts are studied on the basis of nurses' written stories of authority and patients' written stories of power and authority. Beside the review of literature concerning power and authority a qualitative meta-analysis ofthe concept and the phenomenon of empowerment are made. The ontological determination shows how a human being's power is the authority to hold every living thing in trust, to tend and care life. To anyone using this authority, serving onesfellow-being is the purpose. Understanding the pragmatical features of authority in the stories of nurses reveals the life-giving nature of serving. By serving the nurse draws near her true mission as a human being, her authority to care for life with love. The service of the nurse and her ability to see and confirm the patient's otherness creates confidence and results in her authority. The nursedoes not abandon the responsibility associated with authority. When the patientdoes not entrust the nurse with authority the nurse employs her inherent authority to alleviate the suffering of the patient. The pragmatical features of the concepts of power and authority in the patients' stories indicate how the nurse puts her power to an improper use if she only makes use of the authority conferred by the hierarchy of power in the organisation, assumes all power and fails to use her faculty for loving care. Patients feel that their existence is threatened when the nurse tries to deprive them of their authority; they experience homelessness, despair and impotence. Patients' struggle for existence and absolute dignity deprives their health processes of strength, and their suffering becomes unbearable. Patients recognize their vitality when encountering a nurse who uses her authority to alleviate the patients' suffering. The power of compassion is strong, and the patients' dignity is recreated when they are able to serve fellowpatients or nurses. The purpose of human life can be understood as the use of one's own inner power and strength. Love.

The Process of Greening Cycle as Method of Operative Environmental

The structural change of society from product-based business to service- and further to need-based business has caused the fact that work for environmental issues has spread from conventional factories and environmentally harmful production to concern services and offices as well. Almost every company has an office, so a relatively small environmental burden caused by an individual office grows remarkable already at the state level and globally even more. Motivation to work for environmental issues in an individual office could be challenging even without the fact that wasted environmental impacts bound also wasted costs. Besides cost savings, a concretely greener image of a company has its value in the B2Cas well as in the B2B-field. Consumers and clients are more and more conscious of environmental issues and demand concrete actions instead of speeches, good thoughts and meaningless certifications. Internal work for environmental issues at a strategy level is not sufficient, so operational environmental management is needed for changing old practices. This research is about the effects of operative environmental management on the greening process of an office-based business. The research is outlined to concern the operative work in the office including field sales. Target was to concretely lower the environmental impacts of Lyreco Finland and to find cost savings directly by changing the operative practices in the office and also indirectly by affecting the level of environmental knowledge of the personnel. During the greening process, the aim was also to create concrete arguments for marketing as well. The circle of greening process, which was especially created for this diploma work, was used as a method. The circle divides a year to themes and sections separated by factors of environmental impacts. Separation is based on Brett Wills’ thoughts of seven green wastes (Wills, Brett. The Green Intensions. 2009) and follows it uneasily. The circle aimed at ensuring evolutionary growth of knowledge instead of being revolutionary in the changing process. Committing personnel to the process from its start by asking ideas from them and giving them clear directions was an important part of the research of operative management. Because of working from distance, communication with personnel was operated by frequent training days and weekly greening notes via emails and intranet. Also availability for communication was an important task because of the telecommuting. Research results of this work show that operative environmental management in an officebased business today is mostly management of change. When the strategic environmental friendliness is taken into a concrete level, the most important individual factor is motivating the operating personnel. Research shows that evolutionary change is found being an efficient way to make a change. Also understanding one´s own impact on the environmental burden and on the whole greening process clearly motivates the personnel. Results show that in the operative realization of the greening process, clear directions of new working practices, being as concrete as possible, and committing personnel to follow them make the process more effective. The operative environmental management and the cycle of the greening process decrease the environmental burden and save costs. The concrete results could be used as believable arguments in marketing and therefore exploited in communication with interest groups. Commitment of the management is also one of the key factors of success in the greening process. In this research, changes in the business field by a company trade took the focus of the management away from the greening process and made the process more inefficient by decreasing the amount of training days. The circle of greening process will be used as a tool in the future, as well, and therefore it will help observe environmental impacts of a company and increase sustainable development. Commitment of management to the evolutionary environmental work helps the operating personnel lower environmental impacts, decrease costs and build a concretely greener image.

Production of Biofuels by Fischer Tropsch Synthesis

Production of biofuel via biomass gasification followed by Fischer Tropsch synthesis is of considerable interest because of the high quality of fuels produced which do not contain sulphur and are free of carbon dioxide. The purpose of this Master’s thesis is to study feasibility production of biofuels integrated with Fischer Tropsch process using Aspen Plus simulation. The simulation results were used to size process equipment and carry out an economic evaluation. The results show that lowering the reactor temperature from 1000 oC - 850 oC and raising the water gas shift temperature from 500 oC - 600 oC can improve overall gas efficiency, which in turn leads to better production of ultra clean syngas for the Fischer Tropsch synthetic reactor. Similarly, the Fischer Tropsch offgas is converted into a gas turbine for power production, and finally biodiesel is produced as fuels for transportation.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Rukoile ja työtä tee. Onni Puhakan kehitys innovaattorista oman tien kulkijaksi

Pray and work. The development of Onni Puhakka: from innovator to nonconformist This ethnological biographical study examines the modernization which began in the mid-1800s, continued into the mid-1900s, and has changed Finnish society in many ways. This era has been studied on a general level quite extensively, but this work explores the life and everyday experiences of Onni Puhakka (1870−1955), a farmer who spent most of his life in the town of Liperi. The goal is to find new perspectives on the development of the modernization process in society through the experiences of an individual. In this study, a central theme is the rural co-operative movement represented in Finland by Pellervo as well as its development in this country and as a significant undertaking in Onni Puhakka’s life. The co-operative movement was one of the most significant sectors affecting modernization in rural communities. The main character in the study is the grandfather of the present author, and thus this research belongs to the newly accepted ethnological research tradition of studying one’s own community. Written documents, mainly collected and preserved by Onni Puhakka himself during his lifetime, form the research material. The material consists mainly of Puhakka’s extensive correspondence, personal notes and diaries, documents related to his farm, and photographs taken by him. Earlier research and other written material examining the general development of the period were used to provide a background for the study. The co-operative movement formed a comprehensive ideology for Onni Puhakka, in which the possibilities for the development of both individuals and the community were combined. His life was based on a religious conviction, and he felt that the co-operative movement was the application of Christian love for one’s neighbour in practice. At the beginning of his active working career, Puhakka was an innovator, a reformer at the forefront of progress, but quite soon he became a sworn critic of the development of the co-operative movement in particular. One of Puhakka’s criticisms of the co-operative movement was the shifting of decision-making power to professional managers and central organizations, far from the reach of local actors. A fundamental reason for his dissatisfaction was the development within the co-operative movement in which the ideological background was forgotten, and economic goals and making a profit took an excessive significance. This assessment of the co-operative movement made by Onni Puhakka and his predictions about its development were not unfounded. This has been shown by several studies examining the development of both the Pellervo and working class cooperative movements. The professionalization of management, managerialism, as well as the direct links between professional managers of local co-operatives and central organizations have lead to the situation in which fewer and fewer people make the decisions, and management has as its goal economic success and growth. Co-operative enterprises that have grown in size have become estranged from the everyday life of their members. Instead of taking care of relations with the membership of the co-op, competitive ability and the market share have become the most important concerns of the management. As the membership has become alienated, their interest in large-scale co-ops has also become largely economic. A significant change among the membership of the Pellervo movement occurred at the stage when the co-operative movement shifted from rural areas to urban centres. This meant that the commitment of the membership became much looser than it had been in the farmers’ production and consumer co-ops. From the point of view of its members, the nature of the co-operative movement has become diametrically opposed to its point of departure: the active members who previously formed the subject of the co-operative movement have become the object of the economic activities of that same movement. The co-operative movement has been transformed from the progressive agent of change of its early years into a business activity which no longer has any significant task as a social reformer. This study confirms the observations of the latest research on modernization which states that modernization has not been a straightforward and inevitable development that has lead to the present situation. For example, the criticism directed by Puhakka toward the co-operative movement includes information that shows that a few others who were initially actively involved also criticized the development of the movement. Despite his occasional frustration, Onni Puhakka continued his criticism and attempts to get the co-operative movement to change its course and return to its ‘roots’. In the early years of the cooperative movement he probably did not differ much from the other pioneers in the sense that many of them had adopted and internalized the same values and motive for being involved that he had. However, Puhakka differed from his colleagues in the sense that he was able to believe in what he called the “fundamental values” of the co-operative movement longer than many of them.

Optimal trading of wind power in the short term market

The energy reform, which is happening all over the world, is caused by the common concern of the future of the humankind in our shared planet. In order to keep the effects of the global warming inside of a certain limit, the use of fossil fuels must be reduced. The marginal costs of the renewable sources, RES are quite high, since they are new technology. In order to induce the implementation of RES to the power grid and lower the marginal costs, subsidies were developed in order to make the use of RES more profitable. From the RES perspective the current market is developed to favor conventional generation, which mainly uses fossil fuels. Intermittent generation, like wind power, is penalized in the electricity market since it is intermittent and thus diffi-cult to control. Therefore, the need of regulation and thus the regulation costs to the producer differ, depending on what kind of generation market participant owns. In this thesis it is studied if there is a way for market participant, who has wind power to use the special characteristics of electricity market Nord Pool and thus reach the gap between conventional generation and the intermittent generation only by placing bids to the market. Thus, an optimal bid is introduced, which purpose is to minimize the regulation costs and thus lower the marginal costs of wind power. In order to make real life simulations in Nord Pool, a wind power forecast model was created. The simulations were done in years 2009 and 2010 by using a real wind power data provided by Hyötytuuli, market data from Nord Pool and wind forecast data provided by Finnish Meteorological Institute. The optimal bid needs probability intervals and therefore the methodology to create probability distributions is introduced in this thesis. In the end of the thesis it is shown that the optimal bidding improves the position of wind power producer in the electricity market.

Process approach in quality management - Case: ECO process development in EMS industry

The aim of the thesis was to study quality management with process approach and to find out how to utilize process management to improve quality. The operating environment of organizations has changed. Organizations are focusing on their core competences and networking with suppliers and customers to ensure more effective and efficient value creation for the end customer. Quality management is moving from inspection of the output to prevention of problems from occurring in the first place and management thinking is changing from functional approach to process approach. In the theoretical part of the thesis, it is studied how to define quality, how to achieve good quality, how to improve quality, and how to make sure the improvement goes on as never ending cycle. A selection of quality tools is introduced. Process approach to quality management is described and compared to functional approach, which is the traditional way to manage operations and quality. The customer focus is also studied, and it is presented, that to ensure long term customer commitment, organization needs to react to changing customer requirements and wishes by constantly improving the processes. In the experimental part the theories are tested in a process improvement business case. It is shown how to execute a process improvement project starting from defining the customer requirements, continuing to defining the process ownership, roles and responsibilities, boundaries, interfaces and the actual process activities. The control points and measures are determined for the process, as well as the feedback and corrective action process, to ensure continual improvement can be achieved and to enable verification that customer requirements are fulfilled.

Voimalaitoksen käytönaikaisen optimoinnin määrittely

Tässä diplomityössä määritellään biopolttoainetta käyttävän voimalaitoksen käytönaikainen tuotannon optimointimenetelmä. Määrittelytyö liittyy MW Powerin MultiPower CHP –voimalaitoskonseptin jatkokehitysprojektiin. Erilaisten olemassa olevien optimointitapojen joukosta valitaan tarkoitukseen sopiva, laitosmalliin ja kustannusfunktioon perustuva menetelmä, jonka tulokset viedään automaatiojärjestelmään PID-säätimien asetusarvojen muodossa. Prosessin mittaustulosten avulla lasketaan laitoksen energia- ja massataseet, joiden tuloksia käytetään seuraavan optimointihetken lähtötietoina. Optimoinnin kohdefunktio on kustannusfunktio, jonka termit ovat voimalaitoksen käytöstä aiheutuvia tuottoja ja kustannuksia. Prosessia optimoidaan säätimille annetut raja-arvot huomioiden niin, että kokonaiskate maksimoituu. Kun laitokselle kertyy käyttöikää ja historiadataa, voidaan prosessin optimointia nopeuttaa hakemalla tilastollisesti historiadatasta nykytilanteen olosuhteita vastaava hetki. Kyseisen historian hetken katetta verrataan kustannusfunktion optimoinnista saatuun katteeseen. Paremman katteen antavan menetelmän laskemat asetusarvot otetaan käyttöön prosessin ohjausta varten. Mikäli kustannusfunktion laskenta eikä historiadatan perusteella tehty haku anna paranevaa katetta, niiden laskemia asetusarvoja ei oteta käyttöön. Sen sijaan optimia aletaan hakea deterministisellä optimointialgoritmilla, joka hakee nykyhetken ympäristöstä paremman katteen antavia säätimien asetusarvoja. Säätöjärjestelmä on mahdollista toteuttaa myös tulevaisuutta ennustavana. Työn käytännön osuudessa voimalaitosmalli luodaan kahden eri mallinnusohjelman avulla, joista toisella kuvataan kattilan ja toisella voimalaitosprosessin toimintaa. Mallinnuksen tuloksena saatuja prosessiarvoja hyödynnetään lähtötietoina käyttökatteen laskennassa. Kate lasketaan kustannusfunktion perusteella. Tuotoista suurimmat liittyvät sähkön ja lämmön myyntiin sekä tuotantotukeen, ja suurimmat kustannukset liittyvät investoinnin takaisinmaksuun ja polttoaineen ostoon. Kustannusfunktiolle tehdään herkkyystarkastelu, jossa seurataan katteen muutosta prosessin teknisiä arvoja muutettaessa. Tuloksia vertaillaan referenssivoimalaitoksella suoritettujen verifiointimittausten tuloksiin, ja havaitaan, että tulokset eivät ole täysin yhteneviä. Erot johtuvat sekä mallinnuksen puutteista että mittausten lyhyehköistä tarkasteluajoista. Automatisoidun optimointijärjestelmän käytännön toteutusta alustetaan määrittelemällä käyttöön otettava optimointitapa, siihen liittyvät säätöpiirit ja tarvittavat lähtötiedot. Projektia tullaan jatkamaan järjestelmän ohjelmoinnilla, testauksella ja virityksellä todellisessa voimalaitosympäristössä ja myöhemmin ennustavan säädön toteuttamisella.

Development of a measuring-control system for energy monitoring in low power

In this thesis a control system for an intelligent low voltage energy grid is presented, focusing on the control system created by using a multi-agent approach which makes it versatile and easy to expand according to the future needs. The control system is capable of forecasting the future energy consumption and decisions making on its own without human interaction when countering problems. The control system is a part of the St. Petersburg State Polytechnic University’s smart grid project that aims to create a smart grid for the university’s own use. The concept of the smart grid is interesting also for the consumers as it brings new possibilities to control own energy consumption and to save money. Smart grids makes it possible to monitor the energy consumption in real-time and to change own habits to save money. The intelligent grid also brings possibilities to integrate the renewable energy sources to the global or the local energy production much better than the current systems. Consumers can also sell their extra power to the global grid if they want.

Painevesityyppisen ydinvoimalaitoksen sekundääripiirin mallinnus

Tutkimuksen tavoitteena oli kehittää entistä tarkempi ja luotettavampi työkalu Loviisan ydinvoimalaitoksen ensimmäisen reaktoriyksikön sekundääripiirin 50-linjan stationääritilan toiminnan arviointiin. Toisena tavoitteena oli kartoittaa ja raportoida mallintamiseen käytetyn SOLVO-ohjelman kehitysmahdollisuuksia. Tutkimusten perusteella kehitettiin testatusti toimiva prosessimalli, joka dokumentoitiin ja validoitiin yksityiskohtaisesti. Tulevaisuudessa tapahtuvaa kehitystyötä, ja mallin käyttöä varten kehitettiin lisäksi Excel-pohjainen työkalu, jonka avulla SOLVO:n ja Excelin välinen integraatio voidaan myöhemmin julkaistavassa SOLVO:n versiossa viedä nykyistä pidemmälle. Mallintamistyön ohella tutkimuksen aikana selvitettiin olennaisimmat SOLVO:n erityispiirteet ja vahvuudet sekä kartoitettiin sen käyttöön liittyvät kehitystarpeet. Tärkeimpänä kehitysehdotuksena nousi esiin yksittäisissä komponenteissa suoritetun laskennan läpinäkyvyyden parantaminen. Seuraavassa kehitysvaiheessa myös komponenttikohtaiset laskentayhtälöt olisi suositeltavaa asettaa avoimiksi käyttäjäkohtaisille muutoksille. Työn aikana saavutettiin myös muita merkittäviä tuloksia, jotka liittyivät pääosin rinnak-kaisten 10- ja 50-linjojen välisiin yhteyksiin. Linjojen välisiä vaikutuksia analysoitaessa huomattiin niiden olevan olennaisessa asemassa erityisesti sarja-ajon aikana. Mikäli mallilla halutaan kuvata sekä sarja- että rinnanajoa, sen on käsitettävä molemmat linjat ja kaikki niihin liittyvät komponentit. Edellä mainitun lisäksi mallipohjaisen tarkastelun tuloksena tehtiin havaintoja, joiden perusteella nykyistä prosessia voidaan edelleen kehittää. Näistä havainnoista tärkeimpänä merivesipumppujen optimaalisen säätölämpötilan todettiin asettuvan 4,5 – 4,6 °C välille. Toinen huomio liittyi matalapaineturbiinien ulosvirtaushäviöihin, joihin hukataan juoksusta riippuen keskimäärin noin 10 kJ/kg enemmän entalpiaa kuin parhaassa mahdollisessa tapauksessa. Validoinnin yhteydessä havaituista pienistä poikkeamista huolimatta kehitetty malli vastaa hyvin laitokselta saatuja mittaustuloksia sekä muita samassa yhteydessä käytettyjä luotet-tavuuden arviointikriteerejä.

Arinakattilalaitoksen polttoainekäytön tarkastelu

Tässä diplomityössä on tutustuttu Lahti Energia Oy:n Heinolan voimalaitoksen energiantuotantoon. Heinolan voimalaitos on vanha, mutta sen pääkattilana toimiva arinakattila on uusittu 2004. Voimalaitoksen toimintaa halutaan kehittää nykyaikaisemmaksi ja energiatehokkaammaksi. Voimalaitoksella on nykyään kolme asiakasta, joista uusin on liittynyt höyryverkkoon vuonna 2011. Työssä on tutkittu miten voimalaitoksen polttoaineiden käyttö muuttuu uuden asiakkaan myötä. Diplomityön teoriaosassa on keskitytty antamaan tietoa erilaisista polttoaineista sekä arinapolttamisesta polttotekniikkana. Työssä on laskettu voimalaitoksen asiakkaiden käyttämä energiavuositasolla, voimalaitoksen kattilahyötysuhde, prosessihyötysuhde ja niiden avulla laitoksen tarvitsema polttoaine-energia vuodessa. Laskelmat antavat hyvän yleisen kuvan voimalaitoksen käytöstä tällä hetkellä. Käyttöennusteen avulla voidaan arvioida myös laitoksen taloudellista tilaa polttoaineseoksen näkökulmasta.

Thermal Stress in a Roll-to-Roll Printed Electronics Substrate

The Roll-to-Roll process makes it possible to print electronic products continuously onto a uniform substrate. Printing components on flexible surfaces can bring down the costs of simple electronic devices such as RFID tags, antennas and transistors. The possibility of quickly printing flexible electronic components opens up a wide array of novel products previously too expensive to produce on a large scale. Several different printing methods can be used in Roll-to-Roll printing, such as gravure, spray, offset, flexographic and others. Most of the methods can also be mixed in one production line. Most of them still require years of research to reach a significant commercial level. The research for this thesis was carried out at the Konkuk University Flexible Display Research Center (KU-FDRC) in Seoul, Korea. A system using Roll-to-Roll printing requires that the motion of the web can be controlled in every direction in order to align different layers of ink properly. Between printers the ink is dried with hot air. The effects of thermal expansion on the tension of the web are studied in this work, and a mathematical model was constructed on Matlab and Simulink. Simulations and experiments lead to the conclusion that the thermal expansion of the web has a great influence on the tension of the web. Also, experimental evidence was gained that the particular printing machine used for these experiments at KU-FDRC may have a problem in controlling the speeds of the cylinders which pull the web.