Data-parallel computation in parallel and distributed environments

The past few decades have seen a considerable increase in the number of parallel and distributed systems. With the development of more complex applications, the need for more powerful systems has emerged and various parallel and distributed environments have been designed and implemented. Each of the environments, including hardware and software, has unique strengths and weaknesses. There is no single parallel environment that can be identified as the best environment for all applications with respect to hardware and software properties. The main goal of this thesis is to provide a novel way of performing data-parallel computation in parallel and distributed environments by utilizing the best characteristics of difference aspects of parallel computing. For the purpose of this thesis, three aspects of parallel computing were identified and studied. First, three parallel environments (shared memory, distributed memory, and a network of workstations) are evaluated to quantify theirsuitability for different parallel applications. Due to the parallel and distributed nature of the environments, networks connecting the processors in these environments were investigated with respect to their performance characteristics. Second, scheduling algorithms are studied in order to make them more efficient and effective. A concept of application-specific information scheduling is introduced. The application- specific information is data about the workload extractedfrom an application, which is provided to a scheduling algorithm. Three scheduling algorithms are enhanced to utilize the application-specific information to further refine their scheduling properties. A more accurate description of the workload is especially important in cases where the workunits are heterogeneous and the parallel environment is heterogeneous and/or non-dedicated. The results obtained show that the additional information regarding the workload has a positive impact on the performance of applications. Third, a programming paradigm for networks of symmetric multiprocessor (SMP) workstations is introduced. The MPIT programming paradigm incorporates the Message Passing Interface (MPI) with threads to provide a methodology to write parallel applications that efficiently utilize the available resources and minimize the overhead. The MPIT allows for communication and computation to overlap by deploying a dedicated thread for communication. Furthermore, the programming paradigm implements an application-specific scheduling algorithm. The scheduling algorithm is executed by the communication thread. Thus, the scheduling does not affect the execution of the parallel application. Performance results achieved from the MPIT show that considerable improvements over conventional MPI applications are achieved.

Service Management in IP Networks

IP-verkoissa tarjottavat palvelut ovat lisääntyneet, on tullut uusia kanavia, jotka tarjoavat IP-pohjaisia palveluja. Internet-palvelujen tarjonta on tullut mukaan kaapelitelevisio- ja matkapuhelinverkkoihin. Lisääntynyt palvelujen tarjonta ja kysyntä ovat lisänneet palvelujen hallinnan merkitystä. IP-verkoissa on ilmennyt turvallisuuteen, skaalattavuuteen ja palvelun laatuun liittyviä ongelmia. Palvelun laadun tärkeys painottuu reaaliaikaisuutta ja suurta kapasiteettia vaativissa sovelluksissa. Tulevaisuudessa IP-liikenteen on ennustettu kasvavan yli satakertaiseksi nykyisestä tasosta kolmen vuoden kuluessa. Tämän vuoksi on kehitetty uusi verkon ja palvelun hallintamenetelmiä, joista tässä työssä on tutkittu sääntöpohjaista verkon hallintaa.

Collecting Transaction Data in a Fourth Generation Mobile Network

Tässä diplomityössä on oletettu että neljännen sukupolven mobiiliverkko on saumaton yhdistelmä olemassa olevia toisen ja kolmannen sukupolven langattomia verkkoja sekä lyhyen kantaman WLAN- ja Bluetooth-radiotekniikoita. Näiden tekniikoiden on myös oletettu olevan niin yhteensopivia ettei käyttäjä havaitse saanti verkon muuttumista. Työ esittelee neljännen sukupolven mobiiliverkkoihin liittyvien tärkeimpien langattomien tekniikoiden arkkitehtuurin ja perustoiminta-periaatteet. Työ kuvaa eri tekniikoita ja käytäntöjä tiedon mittaamiseen ja keräämiseen. Saatuja transaktiomittauksia voidaan käyttää tarjottaessa erilaistettuja palvelutasoja sekä verkko- ja palvelukapasiteetin optimoimisessa. Lisäksi työssä esitellään Internet Business Information Manager joka on ohjelmistokehys hajautetun tiedon keräämiseen. Sen keräämää mittaustietoa voidaan käyttää palvelun tason seurannassa j a raportoinnissa sekä laskutuksessa. Työn käytännön osuudessa piti kehittää langattoman verkon liikennettä seuraava agentti joka tarkkailisi palvelun laatua. Agentti sijaitsisi matkapuhelimessa mitaten verkon liikennettä. Agenttia ei kuitenkaan voitu toteuttaa koska ohjelmistoympäristö todettiin vajaaksi. Joka tapauksessa työ osoitti että käyttäjän näkökulmasta tietoa kerääville agenteille on todellinen tarve.

Searching electronic marketplaces

The main objective of this thesis was to analyze the usability of registers and indexes of electronic marketplaces. The work is focused on UDDI-based electronic marketplaces, which are standardized by the W3C. UDDI-registers are usable in intranets, extranets and in Internet. Using UDDI-registers Web-services can be searched in many ways, including alphabetical and domain specific searches. Humans and machines can use the features UDDI-registers. The thesis deals the design principles, architectures and specifications of UDDI-registers. In addition, the thesis includes the design and the specifications of an electronic marketplace developed for supporting electronic logistics services.

Cost allocation of corporate IT-services

Cost allocation is an inescapable problem in nearly every organization and in nearly every facet of accounting. Within large corporations there are several different types of units, like profit-making business units and non-profit service units. In order to evaluate the performance of the business units and to fund the operations of service units, the expenses of service production need to be allocated to the business units benefiting from the services.The objective of this thesis was to find good and fair allocating factors for the costs of corporate wide IT services. In order to reach this objective, the cost allocation process was studied in general and an overview of cost structure was established. All possible cost driver candidates were mapped and their good and bad properties were weighed. The cost allocation problem was handled separately according to organizational division of corporate IT department: infrastructure, administrative systems, sales system and e-business. The emphasis was on two largest cost groups: infrastructure costs and sales system costs. As a result of the study an allocation model is presented. It contains categorization of the costs, selected cost drivers and cost distributions for the current year.

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Tiedon hajautus johtamisjärjestelmässä ja DDS-teknologia

Verkostokeskeisessä sodankäynnissä tietojärjestelmien suurimpana haasteena on oikean tiedon hajauttaminen oikeaan paikkaan ja aikaan. Tietojärjestelmissä esitettävän ilmatilannekuvan tulee vastata reaalimaailman tilannetta parhaalla mahdollisella tavalla. Ilmatorjunnassa reaaliaikaisuus nousee erityisen suureen rooliin nopeasti liikkuvien kohteiden takia. Tämä diplomityö on tehty Insta DefSec Oy:ssä liittyen johtamisjärjestelmän uudistamishankkeeseen. Työn vaatimuksina olivat standardeihin perustuvat ratkaisut, joista keskeisimmäksi nousi Data Distribution Service -standardi (DDS) ja sen hyödyntäminen osana johtamisjärjestelmän tiedon hajautusta. Työssä esitellään johtamisjärjestelmien tiedon hajautukseen liittyviä haasteita sekä paikallisessa että maantieteellisesti hajautetussa toimintaympäristössä. Työssä toteutettiin liityntäohjelmisto nykyisen ja uuden johtamisjärjestelmän välille. Liityntäohjelmiston tehtävänä on tuottaa reaaliaikaista ilmatilannekuvaa nykyisestä johtamisjärjestelmästä uuteen johtamisjärjestelmään. DDS-standardin toteuttavana välikerrosarkkitehtuurina käytettiin OpenSplice DDS -tuotetta. Valittu teknologia tarjoaa edistykselliset julkaisija–tilaaja-mallin mukaiset menetelmät tiedon reaaliaikaiseen hajauttamiseen. DDS:n arkkitehtuuri ja palvelun laadun mekanismit mahdollistavat tiedon hajautuksen sodanajan johtamisjärjestelmille.

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.

Lappeenrannan seudun opiskelija-asuntosäätiön sähköisten palveluiden käytettävyyden ja vaikuttavuuden kehittäminen

Sähköiset palvelut ovat tulleet keskeiseksi osaksi Lappeenrannan seudun opiskelija-asuntosäätiön (LOAS) sisäistä ja ulkoista tiedottamista. Tiedon nopea saatavuus ja yksinkertainen käytettävyys ovat avainasemassa kehitettäessä uusia järjestelmiä. Uuden sukupolven käyttäjät ovat tottuneet tiedon saatavuuden helppouteen, joten tiedon tulee olla selkeästi esillä ja siihen on päästävä käsiksi nopeasti. Diplomityön tavoitteena oli tutkia ja kehittää LOAS:n sisäisiä ja ulospäin asiakkaille tarjottavia sähköisiä palveluita. Kehitettävät palvelut olivat intranet, Internet-sivut ja Maestro Opas-asiakashallinta. LOAS:n palvelut on hajautettu usean eri ohjelman välille, joten se aiheuttaa ongelmia informaation siirrossa järjestelmien välillä. Työssä sähköisten palveluiden käytettävyyttä parannettiin lyhentämällä polkuja ja koostamalla palveluita kokonaisuuksiksi. Työn lopputuloksena LOAS:llä on käytössään yksinkertaisemmat Internet-sivut ja selkeämpi intranet-näkymä. Palveluiden käytettävyyden ja vaikuttavuuden arviointi suoritettiin itsenäisenä perehtymisenä ongelmakohtiin ja henkilöhaastatteluina. Haastatteluilla kartoitettiin käyttäjien palvelun tarpeita, jonka avulla kehitettävät kohteet pystyttiin määrittelemään. Palveluiden käytettävyyttä parantamalla asukkaita pyritään ohjaamaan tarjottavien palveluiden piiriin. Tällöin asukkaille tarjottavien palveluiden laatua pystytään parantamaan. LOAS:n tulisi kuitenkin tarkastella erilaisia ratkaisuja toimintojen yhdistämiseen. Tämän avulla asukkaiden kaikki liikkuminen pystyttäisiin käsittelemään yhden ohjelman avulla.

Commitment to military service among Finnish conscripts

This research establishes the primary components, predictors, and consequences of organizational commitment in the military context. Specifically, the research examines commitment to the military service among Finnish conscripts and whether initial affective commitment prior to service predicts later commitment, attitudes, behavior, and performance, and, furthermore, analyzes the changes in commitment and its possible outcomes. The data were collected from records as well as by surveys from 1,387 rank and file soldiers, immediately after they reported for duty, near the end of basic training, and near the end of 6 to 12 months of service. The data covered a wide array of predictor variables, including background items, attitudes toward conscription, mental and physical health, sociability, training quality, and leadership. Moreover, the archival data included such items as rank, criminal record, performance ratings, and the number of medical examines and exemptions. The measures were further refined based on the results of factor analysis and reliability tests. The results indicated that initial commitment significantly corresponded with expected adjustment, intentions to stay in the military, and acceptance of authority. Moreover, initial commitment moderately related to personal growth, perceived performance, and the number of effective service days at the end of service. During basic training, affective commitment was mostly influenced by challenging training, adjustment experiences, regimentation, and unit climate. At the end of service, committed soldiers demonstrated more personal growth and development in service, had higher-level expected performance, and less malingering during their service. Additionally, they had significantly more positive attitudes toward national defense. The results suggest that affective commitment requires adequate personal adjustment, experiences of personal growth and development, and satisfaction with unit dynamics and training. This research contributes to the theoretical discussion on organizational commitment and the will to defend the nation and advances developing models to support and manage conscript training, education, leadership, and personnel policy. This is achieved by determining the main factors and variables, including their relative strength, that affect commitment to the military service. These findings may also facilitate in designing programs aimed at reducing unwanted discharges and inadequate performance. In particular, these results provide tools for improving conscripts’ overall attachment to and identification with the military service.

Configuring Health Care Services - Service Control Improvement

The costs of health care are increasing, and at the same time, population is aging. This leads health care organizations to focus more on home based care services. This thesis focuses on the home care organization of the South Karelian District of Social and Health Services (Eksote), which was established in 2010; how its operation is organized and managed, and which problem types are faced in the daily operation of home care. This thesis examines home care services through an extensive interview study, process mapping and statistical data analysis. To be able to understand the nature of services and special environment theory models, such as service management and performance measurement, service processes and service design are introduced. This study is conducted from an external researcher‟s point of view and should be used as a discussion opener. The outcome of this thesis is an upper level development path for Eksote home care. The organization should evaluate and build a service offering, then productize home care services and modularize the products and identify similarities. Service processes should be mapped to generate efficiency for repeating tasks. Units should be reasonably sized and geographically located to facilitate management and operation. All this can be done by recognizing the different types of service products: runners repeaters and strangers. Furthermore, the organization should not hide behind medical issues and should understand the legislative, medical and operational frameworks in health care.

Developing customer need based services in personal security service industry

The purpose of this thesis is to examine how services can be developed and how the voice of the customer can be incorporated to the strategic planning of services. Furthermore, the objective is to investigate the methods of customer need analysis and service bundling. The data is collected from secondary and primary sources by reviewing the existing academic literature and by conducting in-depth interviews and surveys. The main findings of this research indicate that the service development in personal security service industry should be conducted through a formalized process and the process should begin with setting the strategic objectives. Moreover, the voice of the customer should be incorporated into all stages of the development process, especially into the front-end of the process. Furthermore, the information on customer needs should be gathered in a manner tailored for the purposes of service development.

Developing Service-based Solutions for Water Treatment in Finnish Mining Industry

The aim of this master’s thesis is to analyze the mining industry customers' current and future needs for the water treatment services and discover new business development opportunities in the context of mine water treatment. In addition, the study focuses on specifying service offerings needed and evaluate suitable revenue generation models for them. The main research question of the study is: What kind of service needs related to water treatment can be identified in the Finnish mining industry? The literature examined in the study focused on industrial service classification and new service development process as well as the revenue generation of services. A qualitative research approach employing a case study method was chosen for the study. The present study uses customer and expert interviews as primary data source, complemented by archival data. The primary data was gathered by organizing total of 13 interviews, and the interviews were analyzed by using qualitative content analysis. The abductive-logic was chosen as the way of conducting scientific reasoning in this study. As a result, new service proposals were developed for Finnish mine industry suppliers. The main areas of development were on asset efficiency services and process support services. The service needs were strongly associated with suppliers’ know-how of water treatment process optimization, cost-effectiveness as well as on alternative technologies. The study provides an insight for managers that wish to pursue a water treatment services as a part of their business offering.

Service Productization and Product Servitization in The Contract Manufacturing Company

The role of contract manufacturing and subcontracting has been seen in black and white in product and service point of view. It used to be seen either as a product or a service. In the thesis product-service system, offering combining products and services, was discussed. Theory was created from two perspectives; Service productization via Business Model generation and product servitization via New Service Development process. Target for the case study was to point out new ways of service thinking and ways for changing business environment in contract manufacturing, especially in customer satisfaction and profitability point of view. The case study is following the New Service Development process phases. First ideas were collected from literature and via sales management interviews. Service offering and tool for service requirement evaluation was created. Last financial results of example service scenarios were calculated. It is recommended to take service offering into internal use and further develop it into modular service model. It is also recommended to take created customer service requirement evaluation tool into use for capturing customer service needs but also for communicating those internally.

Service Blueprinting in Irregularity Service Improvement, case Swissport Finland Ltd

The trend of concentrating to core competencies leads to outsourcing of non-core activities. One such activity is logistics, where the responsibility is given to third-party service providers. This means the service provider acts as an intermediary between the buyer and the end customer. This thesis concentrates on depicting the operational environment of one such service provider, Swissport Finland Ltd, and the improvement of their checked baggage irregularity service. The tools used for this work were service blueprinting, an illustrative method for service mapping, and failure modes and effects analysis. The theoretical part of the thesis offers a framework for using these tools for logistics services, while the empirical part consists of a study mostly qualitative in nature. Action research method was used for the service improvement research. According to the results of this study the combination of service blueprinting and FMEA can be used successfully for irregularity service improvement. The most important result was an enhanced irregularity process that has been found to alleviate earlier problems.