55-64 —vuotiaiden käsityksiä eläkeajastaan ja eläkesäästöistään

Tutkimuksen tavoitteena oli selvittää, vastaavatko suomalaisten 55-64 vuotiaiden odotukset eläkkeensä tasosta ja eläkesäästöjensä riittävyydestä todellisuutta. Tutkimuksen empiirinen osa on kerätty haastattelemalla 55-64 vuotiaita suomalaisia eri puolelta Suomea. Aineiston on kerännyt TNSGallup puhelinhaastatteluina. Tutkimuksen perusteella voidaan todeta, että eläkeajalle varatut säästöt eivät riitä halutulla kulutustasolla koko eläkeajaksi. Elinajanodotus kasvaa koko ajan, jolloin eläkeaika on myös pidempi ja säästöjen tulisi vastata pidentynyttä elinaikaa. Eläkeaikaan varautuminen tulisi aloittaa aikaisemmin työuran aikana.

Runkopalkkien valmistuksen kehittäminen

Diplomityössä kehitetään runkopalkkien valmistusta Juhani Haavisto Oy:ssä. Palkkien valmistusta käsitellään hitsauksen ja koneistuksen osalta. Työn alussa perehdytään hitsauksen mekanisointiin, hitsattavuuteen, lastuttavuuteen sekä hitsaus- ja koneistuskiinnittimiin teorian osalta. Tämän jälkeen esitellään valmistettava tuote. Kokeellisessa osassa esitetään runkopalkkien valmistusvaiheet ennen ja jälkeen kehityksen. Esille tulevat niin hitsauksen kuin koneistuksenkin valmistusvaiheet. Tutkimuksessa selvisi, että uudet hitsaus- ja koneistuskiinnittimet pienentävät työaikoja mm. mahdollistamalla laajemman mekanisoidun hitsauksen ja pienentämällä kappaleen kääntöihin ja vaihtoon kuluvaa aikaa. Lopuksi pohditaan mahdollisia jatkokehityssuunnitelmia, jotka koskevat uuden hitsauskuljettimen ja uusien lisäaineiden käyttöä.

Offdesign operation of kraft recovery boiler

A model to solve heat and mass balances during the offdesign load calculations was created. These equations are complex and nonlinear. The main new ideas used in the created offdesign model of a kraft recovery boiler are the use of heat flows as torn iteration variables instead of the current practice of using the mass flows, vectorizing equation solving, thus speeding up the process, using non dimensional variables for solving the multiple heat transfer surface problem and using a new procedure for calculating pressure losses. Recovery boiler heat and mass balances are reduced to vector form. It is shown that these vectorized equations can be solved virtually without iteration. The iteration speed is enhanced by the use of the derived method of calculating multiple heat transfer surfaces simultaneously. To achieve this quick convergence the heat flows were used as the torn iteration parameters. A new method to handle pressure loss calculations with linearization was presented. This method enabled less time to be spent calculating pressure losses. The derived vector representation of the steam generator was used to calculate offdesign operation parameters for a 3000 tds/d example recovery boiler. The model was used to study recovery boiler part load operation and the effect of the black liquor dry solids increase on recovery boiler dimensioning. Heat flows to surface elements for part load calculations can be closely approximated with a previously defined exponent function. The exponential method can be used for the prediction of fouling in kraft recovery boilers. For similar furnaces the firing of 80 % dry solids liquor produces lower hearth heat release rate than the 65 % dry solids liquor if we fire at constant steam flow. The furnace outlet temperatures show that capacity increase with firing rate increase produces higher loadings than capacity increase with dry solids increase. The economizers, boiler banks and furnaces can be dimensioned smaller if we increase the black liquor dry solids content. The main problem with increased black liquor dry solids content is the decrease in the heat available to superheat. Whenever possible the furnace exit temperature should be increased by decreasing the furnace height. The increase in the furnace exit temperature is usually opposed because of fear of increased corrosion.

Jatkuvatoimisen natriumhypokloriittireaktorin mallinnus

Natriumhypokloriittia voidaan valmistaa kloorista ja lipeästä jatkuvatoimisessa absorberissa. Tässä työssä tutkittiin kokeellisesti, miten kaasun ja nesteen virtausnopeudet vaikuttavat täytekappalekolonnin tulvimiseen ja painehäviöön, kuinka nopeasti kloori absorboituu lipeään ja kuinka suuri hypokloriittiliuoksen kierrätys tarvitaan, ettei hypokloriitti ala hajota. Lisäksi luotiin matemaattinen malli, jolla voidaan mitoittaa jatkuvatoiminen vastavirtaperiaatteella toimiva natriumhypokloriittireaktori. Kloori–lipeäsysteemin havaittiin tulvivan suuremmilla virtausnopeuksilla kuin ilma–vesisysteemin. Tosin osa kloorista absorboituu jo ennen täytekappalekerrosta, minkä vuoksi kaasun todellinen virtausnopeus täytekappalekerroksen alaosassa on pienempi kuin mitattu arvo. Kolonnin painehäviö nousee erittäin jyrkästi tulvimispisteen läheisyydessä. Koska kloori absorboituu lähes täydellisesti ja vain kolonnin alaosa tulvii, voidaan kolonnia painehäviön kannalta operoida lähellä tulvimispistettä. Sekä mallinnuksen että koetulosten perusteella yli 99,99 % kloorista absorboituu koeolosuhteissa kahden metrin täytekappalekerroksessa. Nopea absorptio johtuu erittäin nopeasta, irreversiibelistä kloorin reaktiosta ja prosessille tyypillisestä natriumhydroksidikonversion rajoittamisesta alle 94 %:iin. Jotta varmistetaan, ettei hypokloriitti ala hajota, valmista hypokloriittiliuosta täytyy kierrättää kolonniin vähintään noin 4-kertainen määrä tuoreen lipeän syöttömäärän nähden.

Paineviemärissä muodostuvan rikkivedyn vähentäminen kemikaloimalla

Anaerobisissa olosuhteissa muodostuva rikkivetykaasu on tyypillinen ongelma etenkin pitkillä paineviemäriosuuksilla. Sille ominainen epämiellyttävä haju aiheuttaa jätevedenkäsittelyverkostoissa ja viemärilinjojen lähialueilla merkittäviä hajuongelmia. Lisäksi rikkivedyn hapettuessa rikkihapoksi viemäri joutuu alttiiksi korroosiolle. Helsingin Etelä rannassa sijaitsevaan Munkkisaareen päätyy 4,4 km pitkä paineviemäri. Viemärin tuuletusputken kautta leviävä rikkivety on aiheuttanut hajuongelmia alueella. Korkeimmat mitatut rikkivetypitoisuudet tuuletusputken läheisyydessä olivat jopa 300 ppm. Tutkimuksessa tehtiin koeajoja erilaisilla hajunpoistokemikaaleilla rikkivetyongelman ratkaisemiseksi. Viemäriin annosteltiin sen alkupäässä jatkuvatoimisesti ferrosulfaattia ja ferrinitraattisulfaattia, sekä shokki-käsittelyllä natriumhydroksidia (lipeää). Munkkisaaressa mitatut rikkivetypitoisuudet osoittivat käytettyjen kemikaalien tehokkuuden rikkivedyn poistossa. Rikkivedyn saostamiseen tarkoitetut rautasuolat (ferrosulfaatti ja ferrinitraattisulfaatti) vähensivät 100 - 150 g annoksilla rikkivetyä yli 90 prosenttia. Natriumhydroksin annoksella 3600 g/m³ viemärin mikrobiologinen toiminta voitiin estää keskimäärin kymmeneksi päiväksi, mutta tehokas rikkivedyn muodostumisen esto vaatisi käsittelyn uusimisen noin 5 päivän välein. Normaaleissa viemärin olosuhteissa rikkivetyä muodostui vuorokauden aikana yhtä neliömetriä kohden noin 10 g. Kemikaalikäsittelyjen avulla muodostuminen aleni parhaimmillaan kymmenesosaan alkuperäisestä. Tulosten perusteella kemikaalien käytöllä viemärissä voisi välttyä kalliilta saneeraukselta Munkkisaaressa sekä muissa korroosiolle alttiiksi joutuvissa viemäreissä. Kemikalointikustannukset rautasuoloilla olivat noin 11 000 - 34 000 € ja lipeällä noin 7 000 € vuodessa.

Menestyksekkäät yliopistopelin pelaajat? Tutkimus nopeasti ja nuorena valmistumisesta

Succestul players of the university game? A study about the short duration of master’s degree studies and graduating at a young age The duration of studies has long been a topic of conversation. It was first mentioned in 1883, but the discussion has been quite active and topical for the last fifty years. During that time, there have been numerous committees, working groups for the Ministry of Education, and revisions to the structure of the master’s degree program. All of these have focused on lowering the duration of studies as well as the age at which students graduate. These two factors have been regarded as indicators of efficiency. Achieving these goals is seen to promote the successful transition from studies to work. In addition, the greater time that people spend working is thought to help with the fiscal burden of an aging population. The reasons for prolonged study seem to be: students working during the course of their studies; the actual workload of the studies, which sometimes does not correlate with the calculated workload; problems with the students’ course selections and with their financial support from the government; issues in teaching; and problems with university funding. This study focuses on students’ study experiences, their progress, and the university itself. Of particular interest was the students’ use of different resources—cultural, social, and economical capital. Participants in the study had graduated from the University of Turku between the years of 1999 and 2001 and were divided into two groups: prompt graduates, those who graduated among the fastest 18th percent in their faculty; and those who graduated at a slower pace. A survey (N=499) and interviews (N=69) were among the methods used, along with a compilation of statistics on the students’ duration of studies, the number of modules studied, and marks obtained. Bourdieu’s theory about fields and the games people play in those fields formed the theoretical background of this study. The university was seen to form a playing field with historically and politically changeable rules. The students playing in this field were considered to possess different economical, social, and cultural resources, which they use more or less successfully. Some of the strategies used by students result in gra¬duating at a young age and/or a short duration of study; some do not. This study divided the age of graduation and the duration of study into separate games. This allowed the study to determine the relationship between these two factors and to examine their similarities and differences. The study also focused on the idea of success. Short duration of studies and a young graduation age can be considered, be some, an indication of success in navigating the university field. This study aimed to see if this concept held true or whether these seeming indicators of success have negative side effects. The main result of this study is that, even though the games of duration and age have similarities, they are sufficiently diverse to be considered separate games, which need different resources. To graduate with a short duration of studies, it is important for a student to successfully view and navigate the university field, tailoring one’s studies and extracurricular activities to suit the individual. In the game of youth, the background of the student seemed to be of greater importance. The youngest graduates had spent more time with their parents, who also had higher educational qualifications. They also had higher achievement in their previous studies. This seems to indicate that their background allowed them to assimilate a better understanding of the school and university fields and that playing the university game was natural for them. As for the aspect of success, it seems that there are many ways to define the term. Youth on graduation and short duration of studies can be seen as two indicators of success. Both revealed negative and positive outcomes, even though short duration of studies seemed more often to be connected with positive outcomes. However, it seems that the best indicator for success is the way in which students organize study into their lives to support and suit their needs and abilities to realize a meaningful life and a successful entry into the field of work.

Feasibility study for acidic biorefinery concept

The integration a recovery process for spent sulfite liquor from a sulfite cooking process with a kraft pulp mill was studied in this thesis work. The process includes a fermentation process for the production of biofuel. The calculation for three cases was done. The three cases considered were with a spruce sulfite pulp production of 100, 250 and 1000 Adt/day corresponding to 10, 25 and 100% of the total pulp production. A kraft cooking process with prehydrolysis was taken in consideration as reference. Compared to kraft cooking with prehydrolysis a bigger amount of ethanol can be produced by sulfite cooking. In the kraft prehydrolysis case 40 t/day of ethanol and 1000 Adt/day pine pulp is produced and in the sulfite case the production is 113 t/day of ethanol and 1000 Adt/day of spruce pulp. The energy consumption in the sulfite process is assumed to be slightly higher than in the kraft prehydrolysis process. The recovery system for spent liquor mix was studied. The evaporation of the spent cooking liquors should be done separately. The approximately composition of melt was calculated. A comparison of all four cases was done and profitability was estimated.

Adsorptive removal of harmful organic compound from aqueous solutions

Adsorption is one of the most commonly used methods in water treatment processes. It is attractive due to it easy operation and the availability of a wide variety of commercial adsorbents. This doctoral thesis focuses on investigating and explaining the influence of external phase conditions (temperature, pH, ionic strength, acidity, presence of cosolutes) on adsorption phenomena. In order to cover a wide range of factors and phenomena, case studies were chosen from various fields where adsorption is applied. These include the adsorptive removal of surface active agents (used in cleaning chemicals, for example) from aqueous effluents, the removal of hormones (estradiol) from drinking water, and the adsorption of antibiotics onto silica. The latter can beused to predict the diffusion of antibiotics in the aquatic system if they are released into the environment. Also the adsorption of living cells on functionalized polymers to purify infected water streams was studied. In addition to these examples, the adsorptive separation of harmful compounds from internal water streams within a chemical process was investigated. The model system was removal of fermentation inhibitors from lignocelluloses hydrolyzates. The detoxification of the fermentation broth is an important step in the manufacture of bioethanol from wood, but has not been studied previously in connection with concentrated acid hydrolyzates. New knowledge on adsorption phenomena was generated for all of the applications investigated. In most cases, the results could be explained by combining classical theories for individual phenomena. As an example, it was demonstrated how liquid phase aggregation could explain abnormal-looking adsorption equilibrium data. In addition to the fundamental phenomena, also process performance was of interest. This aspect is often neglected in adsorption studies. It was demonstrated that adsorbents should not be selected for a target application based on their adsorption properties only, but regeneration of the spent adsorbent must be considered. It was found that using a suitable amount of organic co-solvent in the regeneration can significantly improve the productivity of the process.

Keille yliopiston portit avautuvat? Tutkimus suomalaisiin yliopistoihin ja eri tieteenaloille valikoitumisesta 2000-luvun alussa

Tutkimuksessa tarkastellaan suomalaisiin yliopistoihin valikoitumista 2000-luvun alussa. Tarkastelu pohjautuu yliopistoon hakeneiden, opiskelemaan hyväksyttyjen ja opiskelupaikkaa ilman jääneiden taustojen vertailuun. Tutkimuksen tarkoituksena on selvittää, miten koulutuksellinen tasa-arvo toteutuu opiskelemaan pääsyssä. Erityistä huomiota kiinnitetään sukupuolten, eri-ikäisten, sosiaalisten ryhmien sekä eri alueella asuvien opiskelijavalinnoissa pärjäämiseen. Lisäksi pohditaan, millaiset taustatekijät ovat yhteydessä opiskelemaan pääsyyn ja miten suomalainen yliopistokenttä on lohkoutunut yliopistoittain ja aloittain hakijoiden ja sisään päässeiden taustojen perusteella. Tutkimuksen pääaineistona on henkilöpohjainen rekisteriaineisto, joka on laadittu valtakunnallisen hakijarekisterin (HAREK) ja Tilastokeskuksen yhteistyönä. Aineisto käsittää 40 %:n satunnaisotoksen vuonna 2003 suomalaisiin yliopistoihin hakeneista (N = 55 790). Aineiston muuttujat kuvaavat hakijoiden taustoja, elämäntilannetta, aiempaa koulutusta ja lapsuudenperheen asemaa. Tutkimuksessa hyödynnetään lisäksi kokonaisjoukosta muodostettua taulukkoaineistoa (N = 139 668). Yliopistoihin hakevat eivät ole yhtenäinen ryhmä. Vaikka suurin osa hakijoista oli nuoria, oli joukossa myös varttuneempia hakijoita, jotka olivat ehtineet hankkia koulutusta ja muuta elämänkokemusta. Päävalinnat toimivat siten myös aikuishakijoiden hakuväylänä; erillisvalintoja eivät hyödynnä läheskään kaikki, joilla siihen olisi mahdollisuus. Klusterianalyysin avulla hakijoista voitiin erottaa neljä ryhmää: 1) nuoret ylioppilaat, 2) toisen tutkinnon suorittajat, 3) koulutuspääoman kartuttajat sekä 4) aikuiset lisäkouluttautujat. Opiskelemaan pääsyyn vaikuttavia tekijöitä analysoitiin logistisen regressioanalyysin avulla. Analyysin mukaan hakijan iällä oli muista taustatekijöistä riippumaton vaikutus opiskelemaan pääsyyn niin, että todennäköisyys päästä yliopistoon vähenee hakijan iän kohotessa. Parhaiten opiskelemaan pääsivät kaikkein nuorimmat, alle 20-vuotiaat hakijat, jotka siis useimmiten ovat saman kevään ylioppilaita. Vanhemmille hakijoille oli usein kertynyt jo koulutusta, mutta aiemmat tutkinnot paransivat sisäänpääsyn mahdollisuuksia vain, mikäli ne olivat korkea-asteelta. Alemmilla ammatillisilla tutkinnoilla oli pikemminkin opiskelemaan pääsyä heikentävä vaikutus. Myös se, mitä hakija oli tehnyt ennen valintakokeita, vaikutti sisäänpääsyn mahdollisuuksiin. Parhaiten valinnoissa pärjäsivät päätoimiset opiskelijat, heikoiten työttömät hakijat. Vaikka miesten hyväksymisprosentit olivat keskimäärin korkeammat kuin naisten, sukupuoli ei osoittautunut itsenäiseksi opiskelemaan pääsyä selittäväksi tekijäksi. Naisten huonompi pärjääminen valinnoissa selittyykin pitkälti sukupuolten eriytyneillä alavalinnoilla. Naisten suosimat alat kun ovat pääsääntöisesti vaikeapääsyisempiä kuin miesten. Tutkimuksessa selvisi myös, että kaupunkilaisuus lisäsi todennäköisyyttä tulla hyväksytyksi. Toisaalta opiskelemaan pääsy erosi myös asuinmaakunnittain, mikä kertoo lähinnä siitä, että eri yliopistojen sisäänpääsyasteissa on varsin suuria eroja. Yliopistojen lohkoutuminen hakijoiden sosiaalisen taustan mukaan oli paljon selvempää kuin alojen. Kaikki pääkaupunkiseudun yliopistot – lukuun ottamatta Teatterikorkeakoulua – luokittuivat isän asemalla mitaten elitistisiksi. Matalimmista taustoista haettiin Lapin, Joensuun ja Vaasan yliopistoihin. Alojen paikka elitistisyyskansanomaisuus -ulottuvuudella vaihteli suuresti yliopistoittain. Teknillistieteellinen, matemaattis-luonnontieteellinen ja kauppatieteellinen ala sijoittuivat kuitenkin keskimääräistä ylemmäs, kun taas kasvatustiede ja farmasia olivat kansanomaisimpia hakukohteita. Opiskelijaksi valikoitumisen peruselementit toistuivat myös tässä tutkimuksessa: koulutetuimpien ja hyvässä asemassa olevien vanhempien jälkeläiset saivat opiskelupaikan useammin kuin muut. Yliopistolaitoksessa vuosikymmenten saatossa toteutetut rakenteelliset muutokset eivät siis ole muuttaneet valikoitumisen peruslinjaa, joskin uutena huomiona nousi maanviljelijöiden jälkeläisten hyvä valinnoissa pärjääminen. Maanviljelijäperheestä tulevien opiskelemaan pääsyn todennäköisyys oli kaikkein suurin.

Kehittyneiden ydinpolttoainekiertojen ympäristövaikutusten ja taloudellisuuden arviointia

Kaikkein yleisin käytössä oleva ydinpolttoainekierto on nykyisin avoin, jossa käytetty ydinpolttoaine loppusijoitetaan suoraan ilman jälleenkäsittelyä. Nykyisin kehitteillä olevat uuden sukupolven ydinreaktorit ovat kuitenkin pääosin suunniteltu osittain tai kokonaan suljetuille ydinpolttoainekierroille, jossa käytetty polttoaine jälleenkäsitellään ja osa materiaaleista kierrätetään. Tämän työn tavoitteena oli arvioida näitä kehittyneitä ydinpolttoainekiertoja ympäristövaikutusten ja taloudellisuuden suhteen. Työn yleisluonteista vertailua varten valittiin neljä erilaista kehittynyttä polttoainekiertoskenaariota, joita verrattiin avoimeen polttoainekiertoon erilaisten parametrien avulla. Parametreinä käytettiin muun muassa uraanin kulutusta, loppusijoitettavan jätteen määrää, aktiivisuutta ja lämmöntuottoa sekä käytönaikaisten radioaktiivisten päästöjen määrää. Yleislounteisen arvioinnin lisäksi työssä tarkasteltiin polttoainekiertoa myös Suomen näkökulmasta. Nykyistä polttoainekiertoa verrattiin kahteen erilaiseen tulevaisuuden versioon. Kestävän kehityksen osalta kehittyneet polttoainekierrot vähensivät ympäristövaikutusten määrää avoimeen polttoainekiertoon verrattuna. Kehittyneiden polttoainekiertojen kustannukset olivat avoimen polttoainekierron kustannuksia suuremmat. Kokonaiskustannuksissa ero oli kaikilla vertailuskenaarioilla alle 20 %, mutta polttoainekiertokustannuksissa kustannusten kasvu oli välillä 27-45 % riippuen skenaariosta. Suomen tapauksessa tulokset olivat hyvin samankaltaisia. Uraanin kulutus ja loppusijoitettavan jätteen määrä väheni kehittyneempien polttoainekiertojen johdosta. Polttoainekiertokustannukset nousivat noin puolitoistakertaisiksi, mutta vaikutus kokonaiskustannuksiin oli vain noin 10 %. Johtopäätöksenä voidaan todeta, ettäydinpolttoainekierron ympäristövaikutuksia on mahdollista vähentää osittain tai kokonaan suljettujen polttoainekiertojen avulla. Vaikka polttoainekierron kustannukset kasvavat, niiden vaikutus ydinsähkön kokonaiskustannuksiin ei ole niin merkittävä.

Rukoile ja työtä tee. Onni Puhakan kehitys innovaattorista oman tien kulkijaksi

Pray and work. The development of Onni Puhakka: from innovator to nonconformist This ethnological biographical study examines the modernization which began in the mid-1800s, continued into the mid-1900s, and has changed Finnish society in many ways. This era has been studied on a general level quite extensively, but this work explores the life and everyday experiences of Onni Puhakka (1870−1955), a farmer who spent most of his life in the town of Liperi. The goal is to find new perspectives on the development of the modernization process in society through the experiences of an individual. In this study, a central theme is the rural co-operative movement represented in Finland by Pellervo as well as its development in this country and as a significant undertaking in Onni Puhakka’s life. The co-operative movement was one of the most significant sectors affecting modernization in rural communities. The main character in the study is the grandfather of the present author, and thus this research belongs to the newly accepted ethnological research tradition of studying one’s own community. Written documents, mainly collected and preserved by Onni Puhakka himself during his lifetime, form the research material. The material consists mainly of Puhakka’s extensive correspondence, personal notes and diaries, documents related to his farm, and photographs taken by him. Earlier research and other written material examining the general development of the period were used to provide a background for the study. The co-operative movement formed a comprehensive ideology for Onni Puhakka, in which the possibilities for the development of both individuals and the community were combined. His life was based on a religious conviction, and he felt that the co-operative movement was the application of Christian love for one’s neighbour in practice. At the beginning of his active working career, Puhakka was an innovator, a reformer at the forefront of progress, but quite soon he became a sworn critic of the development of the co-operative movement in particular. One of Puhakka’s criticisms of the co-operative movement was the shifting of decision-making power to professional managers and central organizations, far from the reach of local actors. A fundamental reason for his dissatisfaction was the development within the co-operative movement in which the ideological background was forgotten, and economic goals and making a profit took an excessive significance. This assessment of the co-operative movement made by Onni Puhakka and his predictions about its development were not unfounded. This has been shown by several studies examining the development of both the Pellervo and working class cooperative movements. The professionalization of management, managerialism, as well as the direct links between professional managers of local co-operatives and central organizations have lead to the situation in which fewer and fewer people make the decisions, and management has as its goal economic success and growth. Co-operative enterprises that have grown in size have become estranged from the everyday life of their members. Instead of taking care of relations with the membership of the co-op, competitive ability and the market share have become the most important concerns of the management. As the membership has become alienated, their interest in large-scale co-ops has also become largely economic. A significant change among the membership of the Pellervo movement occurred at the stage when the co-operative movement shifted from rural areas to urban centres. This meant that the commitment of the membership became much looser than it had been in the farmers’ production and consumer co-ops. From the point of view of its members, the nature of the co-operative movement has become diametrically opposed to its point of departure: the active members who previously formed the subject of the co-operative movement have become the object of the economic activities of that same movement. The co-operative movement has been transformed from the progressive agent of change of its early years into a business activity which no longer has any significant task as a social reformer. This study confirms the observations of the latest research on modernization which states that modernization has not been a straightforward and inevitable development that has lead to the present situation. For example, the criticism directed by Puhakka toward the co-operative movement includes information that shows that a few others who were initially actively involved also criticized the development of the movement. Despite his occasional frustration, Onni Puhakka continued his criticism and attempts to get the co-operative movement to change its course and return to its ‘roots’. In the early years of the cooperative movement he probably did not differ much from the other pioneers in the sense that many of them had adopted and internalized the same values and motive for being involved that he had. However, Puhakka differed from his colleagues in the sense that he was able to believe in what he called the “fundamental values” of the co-operative movement longer than many of them.

Determination of slurry’s viscosity using case based reasoning approach

Case-based reasoning (CBR) is a recent approach to problem solving and learning that has got a lot of attention over the last years. In this work, the CBR methodology is used to reduce the time and amount of resources spent on carry out experiments to determine the viscosity of the new slurry. The aim of this work is: to develop a CBR system to support the decision making process about the type of slurries behavior, to collect a sufficient volume of qualitative data for case base, and to calculate the viscosity of the Newtonian slurries. Firstly in this paper, the literature review about the types of fluid flow, Newtonian and non-Newtonian slurries is presented. Some physical properties of the suspensions are also considered. The second part of the literature review provides an overview of the case-based reasoning field. Different models and stages of CBR cycles, benefits and disadvantages of this methodology are considered subsequently. Brief review of the CBS tools is also given in this work. Finally, some results of work and opportunities for system modernization are presented. To develop a decision support system for slurry viscosity determination, software application MS Office Excel was used. Designed system consists of three parts: workspace, the case base, and section for calculating the viscosity of Newtonian slurries. First and second sections are supposed to work with Newtonian and Bingham fluids. In the last section, apparent viscosity can be calculated for Newtonian slurries.

Measuring Cost of Poor Quality in Industrial Electronics

Quality is not only free but it can be a profit maker. Every dollar that is not spent on doing things wrong becomes a dollar right on the bottom line. The main objective of this thesis is to give an answer on how cost of poor quality can be measured theoretically correctly. Different calculation methods for cost of poor quality are presented and discussed in order to give comprehensive picture about measurement process. The second objective is to utilize the knowledge from the literature review and to apply it when creating a method for measuring cost of poor quality in supplier performance rating. Literature review indicates that P-A-F model together with ABC methodology provides a mean for quality cost calculations. These models give an answer what should be measured and how this measurement should be carried out. However, when product or service quality costs are incurred when quality character derivates from target value, then QLF seems to be most appropriate methodology for quality cost calculation. These methodologies were applied when creating a quality cost calculation method for supplier performance ratings.

Flexible multibody approach in bone strain estimation during physical activity:

Bone strain plays a major role as the activation signal for the bone (re)modeling process, which is vital for keeping bones healthy. Maintaining high bone mineral density reduces the chances of fracture in the event of an accident. Numerous studies have shown that bones can be strengthened with physical exercise. Several hypotheses have asserted that a stronger osteogenic (bone producing) effect results from dynamic exercise than from static exercise. These previous studies are based on short-term empirical research, which provide the motivation for justifying the experimental results with a solid mathematical background. The computer simulation techniques utilized in this work allow for non-invasive bone strain estimation during physical activity at any bone site within the human skeleton. All models presented in the study are threedimensional and actuated by muscle models to replicate the real conditions accurately. The objective of this work is to determine and present loading-induced bone strain values resulting from physical activity. It includes a comparison of strain resulting from four different gym exercises (knee flexion, knee extension, leg press, and squat) and walking, with the results reported for walking and jogging obtained from in-vivo measurements described in the literature. The objective is realized primarily by carrying out flexible multibody dynamics computer simulations. The dissertation combines the knowledge of finite element analysis and multibody simulations with experimental data and information available from medical field literature. Measured subject-specific motion data was coupled with forward dynamics simulation to provide natural skeletal movement. Bone geometries were defined using a reverse engineering approach based on medical imaging techniques. Both computed tomography and magnetic resonance imaging were utilized to explore modeling differences. The predicted tibia bone strains during walking show good agreement with invivo studies found in the literature. Strain measurements were not available for gym exercises; therefore, the strain results could not be validated. However, the values seem reasonable when compared to available walking and running invivo strain measurements. The results can be used for exercise equipment design aimed at strengthening the bones as well as the muscles during workout. Clinical applications in post fracture recovery exercising programs could also be the target. In addition, the methodology introduced in this study, can be applied to investigate the effect of weightlessness on astronauts, who often suffer bone loss after long time spent in the outer space.

Practical Framework for Monitoring the Performance of Agile IT Projects in an Output-Based Outsourcing Context

Over the past decade, organizations worldwide have begun to widely adopt agile software development practices, which offer greater flexibility to frequently changing business requirements, better cost effectiveness due to minimization of waste, faster time-to-market, and closer collaboration between business and IT. At the same time, IT services are continuing to be increasingly outsourced to third parties providing the organizations with the ability to focus on their core capabilities as well as to take advantage of better demand scalability, access to specialized skills, and cost benefits. An output-based pricing model, where the customers pay directly for the functionality that was delivered rather than the effort spent, is quickly becoming a new trend in IT outsourcing allowing to transfer the risk away from the customer while at the same time offering much better incentives for the supplier to optimize processes and improve efficiency, and consequently producing a true win-win outcome. Despite the widespread adoption of both agile practices and output-based outsourcing, there is little formal research available on how the two can be effectively combined in practice. Moreover, little practical guidance exists on how companies can measure the performance of their agile projects, which are being delivered in an output-based outsourced environment. This research attempted to shed light on this issue by developing a practical project monitoring framework which may be readily applied by organizations to monitor the performance of agile projects in an output-based outsourcing context, thus taking advantage of the combined benefits of such an arrangement Modified from action research approach, this research was divided into two cycles, each consisting of the Identification, Analysis, Verification, and Conclusion phases. During Cycle 1, a list of six Key Performance Indicators (KPIs) was proposed and accepted by the professionals in the studied multinational organization, which formed the core of the proposed framework and answered the first research sub-question of what needs to be measured. In Cycle 2, a more in-depth analysis was provided for each of the suggested Key Performance Indicators including the techniques for capturing, calculating, and evaluating the information provided by each KPI. In the course of Cycle 2, the second research sub-question was answered, clarifying how the data for each KPI needed to be measured, interpreted, and acted upon. Consequently, after two incremental research cycles, the primary research question was answered describing the practical framework that may be used for monitoring the performance of agile IT projects delivered in an output-based outsourcing context. This framework was evaluated by the professionals within the context of the studied organization and received positive feedback across all four evaluation criteria set forth in this research, including the low overhead of data collection, high value of provided information, ease of understandability of the metric dashboard, and high generalizability of the proposed framework.