The Reflections of Strategic Orientation on profitability - A resource-based study in pulp and paper industry

Tutkielman tavoitteena oli analysoida erilaisia strategisia orientaatioita sellu- ja paperiteollisuudessa. Sellu- ja paperiteollisuus on kohtaamassa strategisia haasteita, jotka ulottuvat syvälle sen rakenteisiin. Yritykset ovat valinneet erilaisia lähestymistapoja organisoidessaan tuotantoa ja kansainvälistä arvoketjuaan tässä muuttuvassa ympäristössä. Tutkimukseen valittiin 30 suurinta sellu- ja paperiteollisuudessa toimivaa yritystä ja mahdollisia syitä kannattavuuseroihin yritysten välillä analysoitiin. Yritysten strategista orientaatiota tarkasteltiin vertailemalla muun muassa seuraavia tekijöitä: vertikaalinen integraatioaste, tuotevalikoiman laajuus, tuotantokapasiteetin levinneisyys ja tuotantokapasiteetin ikä. Kannattavuutta mitattiin erilaisilla talouden tunnusluvuilla (liikevoitto, oman pääoman tuotto-%, koko pääoman tuotto-%). Tulosten mukaan yrityksiä voidaan ryhmitellä strategisen orientaation perusteella ja ryhmien välillä on kannattavuuseroja.

Analyzing dynamic intellectual capital: System-based theory and application

This research report presents an application of systems theory to evaluating intellectual capital (IC) as organization's ability for self-renewal. As renewal ability is a dynamic capability of an organization as a whole, rather than a static asset or an atomistic competence of separate individuals within the organization, it needs to be understood systemically. Consequently, renewal ability has to be measured with systemic methods that are based on a thorough conceptual analysis of systemic characteristics of organizations. The aim of this report is to demonstrate the theory and analysis methodology for grasping companies' systemic efficiency and renewal ability. The volume is divided into three parts. The first deals with the theory of organizations as self-renewing systems. In the second part, the principles of quantitative analysis of organizations are laid down. Finally, the detailed mathematics of the renewal indices are presented. We also assert that the indices produced by the analysis are an effective tool for the management and valuation of knowledge-intensive companies.

Aspects on Process Engineering in the Finnish Pulp and Paper Industry : Thesis for the Degree of Licentiate in Science of Technology

Process development will be largely driven by the main equipment suppliers. The reason for this development is their ambition to supply complete plants or process systems instead of single pieces of equipment. The pulp and paper companies' interest lies in product development, as their main goal is to create winning brands and effective brand management. Design engineering companies will find their niche in detail engineering based on approved process solutions. Their development work will focus on increasing the efficiency of engineering work. Process design is a content-producing profession, which requires certain special characteristics: creativity, carefulness, the ability to work as a member of a design team according to time schedules and fluency in oral as well as written presentation. In the future, process engineers will increasingly need knowledge of chemistry as well as information and automation technology. Process engineering tools are developing rapidly. At the moment, these tools are good enough for static sizing and balancing, but dynamic simulation tools are not yet good enough for the complicated chemical reactions of pulp and paper chemistry. Dynamic simulation and virtual mill models are used as tools for training the operators. Computational fluid dynamics will certainlygain ground in process design.

XML-based content transformation in converged service development

Tele- ja dataviestinnän yhdistyminen digitaaliseen sisältöön luo uusia palveluideoita sekä mobiili- että internetverkkoihin. Nämä palvelut kehitetään usein erikseen, jolloin saman sisällön käyttäminen eri pääsymenetelmin ei ole mahdollista. Sisältömuunnos on mahdollista sisällön ja muotoilun eriyttämisellä, joka puolestaan vaatii informaatioyksiköiden merkkauksen sisältöä kuvaavilla lisätiedoilla. Tässä diplomityössä tutkitaan Extensible Markup Languagen (XML) käyttöä yhdistyneiden palvelujen sisältömuunnoksessa. Nykyisiä ja tulevia palveluita ja verkkoja tarkastellaan sekä sisällön että liiketoiminnan kannalta. Lisäksi esitellään lyhyesti omia ajatuksia ja käsityksiä yhdistyneistä palveluista ja informaation täsmällisyydestä. Työn käytännön osuudessa kuvataan itse suunniteltu palvelualusta sekä esitellään sen avulla rakennettuja sovelluksia

Predicting diffusion of innovations with self-organisation and machine learning

The main subject of this master's thesis was predicting diffusion of innovations. The prediction was done in a special case: product has been available in some countries, and based on its diffusion in those countries the prediction is done for other countries. The prediction was based on finding similar countries with Self-Organizing Map~(SOM), using parameters of countries. Parameters included various economical and social key figures. SOM was optimised for different products using two different methods: (a) by adding diffusion information of products to the country parameters, and (b) by weighting the country parameters based on their importance for the diffusion of different products. A novel method using Differential Evolution (DE) was developed to solve the latter, highly non-linear optimisation problem. Results were fairly good. The prediction method seems to be on a solid theoretical foundation. The results based on country data were good. Instead, optimisation for different products did not generally offer clear benefit, but in some cases the improvement was clearly noticeable. The weights found for the parameters of the countries with the developed SOM optimisation method were interesting, and most of them could be explained by properties of the products.

Scenario Analysis of the Location Based Services Industry

Tutkimuksen tavoitteena oli luoda erilaisia skenaariota paikka riippuvaisten palveluiden toimialan tulevaisuudesta. Tunnistamalla nykyisiä sekä tulevia alaa edistäviä ja rajoittavia tekijöitä kolme skenaariota luotiin, jotka mahdollisesti kuvaisivat paikka riippuvaisten palveluiden toimialaa viiden vuoden päästä: "Massa spämmaus", "Raju operaattori kilpailu - nousevia yksityisyyden huolia" sekä "Nokian ajama kolmannen sukupolven verkot tulevat ennen odotettua" Skenaarioiden luomiseksi ensimmäinen osa tutkimuksesta keskittyi erilaisiin skenaarioiden kirjoitus prosesseihin ja niissä huomioitaviin asioihin. Tutkimuksen tarkoituksiin sopiva skenaarion kirjoitusprosessi esiteltiin, minkä jälkeen| paikkariippuvaisten palveluiden toimialaa käsiteltiin. Lopuksi itse skenaariot esiteltiin ja nimettiin skenaarioiden teemojen mukaan. Tutkimuksen johtopäätös on, ettei toimialan tulevaisuutta voida ennustaa riittävällä varmuudella. Tutkimuksen arvo kuitenkin piilee sen antamassa ymmärryksessä liittyen tekijöihin, jotka tulevat päättämään alan tulevaisuuden sekä skenaariossa, joita nämä tekijät voivat muodostaa.

Implementing an Evidence-based Hypertension Guideline into Finnish Primary Care Nursing

Kohonneen verenpaineen hoitosuosituksen käyttöönottosuomen perusterveydenhiollon hoitotyössä Tutkimuksen tavoitteena oli tuottaa suosituksia näyttöön perustuvien Käypä hoito -suositusten käytön edistämiseksi perusterveydenhuollon hoitotyössä. Tutkimuksen ensimmäisessä vaiheessa arvioitiin Kohonneen verenpaineen hoitosuosituksen käyttöönottoa terveyskeskuksissa. Toisessa vaiheessa selvitettiin hoitajien hoitosuositusasenteita ja kokemuksia hoitosuosituksen käyttöönotosta. Kolmannessa vaiheessa selvitettiin hoitohenkilöstön näkemyksiä hoitosuosituksen käyttöä edistävistä tekijöistä. Kohonneen verenpaineen hoitosuositus oli ylilääkäreiden ja ylihoitajien mukaan otettu käyttöön lähes kaikissa terveyskeskuksissa, mutta heidän näkemyksensä suositusten käyttöönottoa koskevista terveyskeskuksissa tehdyistä sopimuksista erosivat toisistaan monilta osin. Myös käyttöönoton toteutuksessa oli suurta vaihtelua terveyskeskusten välillä. Toteutustavan perusteella ääripäissä sijaitsevat terveyskeskukset luokiteltiin yksittäisin ja monin keinoin käyttöönottoa tukeneiksi. Hoitajien hoitosuositusasenteet olivat hyvin myönteisiä ja hoitosuosituksia pidettiin luotettavina tiedonlähteinä, ja niiden uskottiin parantavan hoidon laatua. Hoitosuositusten paikallinen soveltaminen sekä johdon ja lääkäreiden tuki olivat hoitajien mielestä keskeisiä käyttöönotossa, vaikkakin tulosten mukaan kaikki käytetyt keinot olivat yhteydessä positiivisempiin hoitosuositusasenteisiin sekä aktiivisempaan hoitajien itsensä ilmaisemaan hoitosuositusten käyttöön. Yhteenvetona voidaan todeta, että Käypä Hoito -suositukset on hyväksytty osaksi kliinistä hoitotyön käytäntöä. Niiden käytön tehostamiseksi tulisi kiinnittää huomiota suositusten paikalliseen soveltamiseen ja eri ammattiryhmien tehtäväkuvien määrittelyyn. Tähän tarvitaan terveyskeskusten johdon ja lääkäreiden selkeää tukea.

Patient education to support self-management of patients with mental illness

This study explores areas which need to be improved to develop the quality of patient education to support self-management of patients with mental illness in psychiatric hospitals. The study was conducted in five phases during the period 2000 – 2007. First, patients‘ (n = 313) satisfaction with patient education were investigated. Second, patients' (n = 51) experiences of patient education were explored. Third, a national survey was conducted to investigate realisation of patient education from the staff (n = 55) viewpoint. Fourth, outcomes of patient education were investigated by evaluating the impacts of different patient education methods on patients‘ (n = 311) attitudes towards medication, knowledge level and importance of information. Fifth, patients‘ (n = 16) perceptions of different patient education methods were explored. Patients reported poor satisfaction with patient education (Phase I), and they have considerable need to receive information during their hospital stay (Phase II). Described by staff, the content of patient education covered almost all informational areas investigated. However, discrepancies related to the realisation of patient education were found. (Phase III.) Evaluation of different patient education methods indicate that patients derived benefits from structured patient education with supportive methods (Phase IV) and patients also perceived that these methods supported their information receiving (Phase V). In order to improve the quality of patient education to support self-management of patients with mental illness patient education should be systematically and individually provided to all patients by using different educational methods. Realisation of this should be ensured by providing written instructions, improving nurses‘ knowledge and skills as well ensuring operating conditions.

Verenpaineen mittaamisen opettaminen sairaanhoitaja- ja terveydenhoitajaopiskelijoille

Teaching the measurement of blood pressure for both nursing and public health nursing students The purpose of this two-phase study was to develop the teaching of blood pressure measurement within the nursing degree programmes of the Universities of Applied Sciences. The first survey phase described what and how blood pressure measurement was taught within nursing degree programmes. The second intervention phase (2004-2005) evaluated first academic year nursing and public health nursing students’ knowledge and skills results for blood pressure measurement. Additionally, the effect on the Taitoviikko experimental group students’ blood pressure measurement knowledge and skills level. A further objective was to construct models for an instrument (RRmittTest) to evaluate nursing students measurement of blood pressure (2003-2009). The research data for the survey phase were collected from teachers (total sampling, N=107, response rate 77%) using a specially developed RRmittopetus-questionnaire. Quasi-experimental study data on the RRmittTest-instrument was collected from students (purposive sampling, experimental group, n=29, control group, n=44). The RRmittTest consisted of a test of knowledge (Tietotesti) and simulation-based test (TaitoSimkäsi and Taitovideo) of skills. Measurements were made immediately after the teaching and in clinical practice. Statistical methods were used to analyse the results and responses to open-ended questions were organised and classified. Due to the small amount of materials involved and the results of distribution tests of the variables, non-parametric analytic methods were mainly used. Experimental group and control group similar knowledge and skills teaching was based on the results of the national survey phase (RRmittopetus) questionnaire results. Experimental group teaching includes the supervised Taitoviikko teaching method. During Taitoviikko students studied blood pressure measurement at the municipal hospital in a real nursing environment, guided by a teacher and a clinical nursing professional. In order to evaluate both learning and teaching the processes and components of blood pressure measurement were clearly defined as follows: the reliability of measurement instruments, activities preceding blood pressure measurement, technical execution of the measurement, recording, lifestyle guidance and measurement at home (self-monitoring). According to the survey study, blood pressure measurement is most often taught at Universities of Applied Sciences, separately, as knowledge (teaching of theory, 2 hours) and skills (classroom practice, 4 hours). The teaching was implemented largely in a classroom and was based mainly on a textbook. In the intervention phase the students had good knowledge of blood pressure measurement. However, their blood pressure measurement skills were deficient and the control group students, in particular, were highly deficient. Following in clinical practice the experimental group and control group students’ blood pressure measurement recording knowledge improve and experimental groups declined lifestyle guidance. Skills did not improve within any of the components analysed. The control groups` skills on the whole, declined statistically.There was a significant decline amongst the experimental group although only in one component measured. The results describe the learning results for first academic year students and no parallel conclusions should be drawn when considering any learning results for graduating students. The results support the use and further development of the Taitoviiko teaching method. The RRmittTest developed for the study should be assessed and the results seen from a negative perspective. This evaluation tool needs to be developed and retested.

Tool-supported invariant-based programming

The development of correct programs is a core problem in computer science. Although formal verification methods for establishing correctness with mathematical rigor are available, programmers often find these difficult to put into practice. One hurdle is deriving the loop invariants and proving that the code maintains them. So called correct-by-construction methods aim to alleviate this issue by integrating verification into the programming workflow. Invariant-based programming is a practical correct-by-construction method in which the programmer first establishes the invariant structure, and then incrementally extends the program in steps of adding code and proving after each addition that the code is consistent with the invariants. In this way, the program is kept internally consistent throughout its development, and the construction of the correctness arguments (proofs) becomes an integral part of the programming workflow. A characteristic of the approach is that programs are described as invariant diagrams, a graphical notation similar to the state charts familiar to programmers. Invariant-based programming is a new method that has not been evaluated in large scale studies yet. The most important prerequisite for feasibility on a larger scale is a high degree of automation. The goal of the Socos project has been to build tools to assist the construction and verification of programs using the method. This thesis describes the implementation and evaluation of a prototype tool in the context of the Socos project. The tool supports the drawing of the diagrams, automatic derivation and discharging of verification conditions, and interactive proofs. It is used to develop programs that are correct by construction. The tool consists of a diagrammatic environment connected to a verification condition generator and an existing state-of-the-art theorem prover. Its core is a semantics for translating diagrams into verification conditions, which are sent to the underlying theorem prover. We describe a concrete method for 1) deriving sufficient conditions for total correctness of an invariant diagram; 2) sending the conditions to the theorem prover for simplification; and 3) reporting the results of the simplification to the programmer in a way that is consistent with the invariantbased programming workflow and that allows errors in the program specification to be efficiently detected. The tool uses an efficient automatic proof strategy to prove as many conditions as possible automatically and lets the remaining conditions be proved interactively. The tool is based on the verification system PVS and i uses the SMT (Satisfiability Modulo Theories) solver Yices as a catch-all decision procedure. Conditions that were not discharged automatically may be proved interactively using the PVS proof assistant. The programming workflow is very similar to the process by which a mathematical theory is developed inside a computer supported theorem prover environment such as PVS. The programmer reduces a large verification problem with the aid of the tool into a set of smaller problems (lemmas), and he can substantially improve the degree of proof automation by developing specialized background theories and proof strategies to support the specification and verification of a specific class of programs. We demonstrate this workflow by describing in detail the construction of a verified sorting algorithm. Tool-supported verification often has little to no presence in computer science (CS) curricula. Furthermore, program verification is frequently introduced as an advanced and purely theoretical topic that is not connected to the workflow taught in the early and practically oriented programming courses. Our hypothesis is that verification could be introduced early in the CS education, and that verification tools could be used in the classroom to support the teaching of formal methods. A prototype of Socos has been used in a course at Åbo Akademi University targeted at first and second year undergraduate students. We evaluate the use of Socos in the course as part of a case study carried out in 2007.

Ammatillisen osaamisen tukeminen muuttuvissa toimintaympäristöissä : tutkimus ikääntyvien työntekijöiden näkökulmasta

The purpose of the study was to describe the experiences of received support of aging employees and their work related self-image in changing working environments. Firstly, theaim was to discover how the support from organisations and leaders was verified. Secondly, the aim was to get answers how employees experienced themselves as workers and as learners in the current work context. Thirdly, the aim was to compare different knowledge information stages and company cultures and how they have influenced the experiences of professional competence development among aging employees. In addition the education- and career backgrounds were investigated to gain more understanding of their role in experiencing support and relation to the occupational self-image. The theoretical frame of reference of this researchis multidisciplinary. The theoretical part focuses on the meaning of work for human being from a sociological, late-modern perspective. On the other hand it examines the ageing process from a physiological and also from a perspective of age discrimination and life control. The occupational selfimage and the strength of motivation has an effect on learning in working life which is crucial and firmpart individual trajectories. According to the theoretical review company culture, leadership and especially the managers' role as a creator of a learning atmosphere are increasingly critical for aging adults' learning when the role of informal work-based learning is increasing. The empirical data was collected with aquestionnaire and interviews, which were carried out in May to October 2001. The data consists of 263 respondents of which further eight persons were interviewed. All respondents were over the age of 45 and represented all levels of their organisations in an IT-technology firm and a chemical industry plant. The central findings in this research show that the aging adults have experienced that theemployers do care about the development of their occupational skills. On the other hand there are fewer concrete activities to reveal this support. There is anobvious disproportion between the expressed aims and the realisation of the activities. Signs of age discrimination are few. The style of management has becomemore supporting for self directed activities which are seen to support adults learning. Higher education and individual activity to seek possibilities to learnwere encouraging the development of occupational skills. Age itself was not a crucial aspect when comparing the experiences among younger (45-54 years) and older (55-64 years) groups. Job satisfaction and professional self esteem seemed tobe considerably strong. The individual characteristics were more important elements in developing occupational skills than the age. The degree of anxiety at work was low. In addition among the older group the strong feeling of coherence and the occupational self image were significant for supporting the professional competence. The motivation to learn was also stable. Among the seniors there was some slight evidence of declining motivation. In the IT-firm the support was experienced stronger for aging employees than in the chemical industry plant. Thosewho had experienced support in the chemical industry plant had higher educational background than the others. In IT-firm they also experienced more support from the manager than in the chemical industry plant. The results show that it is more likely that the differences are caused mostly by the stage of information intensity and the character of company culture which is determined by the activities. IT-business demands constantly accommodation to changes and the chemical industry plant which is representing more traditional business field, where the atmosphere of learning is determined by the traditions of company culture, the changes are carried out slowly.

Effects of Silica Based Biomaterials on Bone Marrow Derived Cells - Material Aspects of Bone Regeneration

Silica based biomaterials, such as melt-derived bioactive glasses and sol-gel glasses, have been used for a long time in bone healing applications because of their ability to form hydroxyapatite and to stimulate stem cell proliferation and differentiation. In this study, bone marrow derived cells were cultured with bioactive glass and sol-gel silica, and seeded into porous polymer composite scaffolds that were then implanted femorally and subcutaneously in rats to monitor their migration inside host tissue. Bone marrow derived cells were also injected intraperitoneally. Transplanted cells migrated to various tissues inside the host, including the lung, liver spleen, thymus and bone marrow. The method of transplantation affected the time frame of cell migration, with intraperitoneal injection being the fastest and femoral implantation the slowest, but not the target tissues of migration. Transplanted donor cells had a limited lifetime in the host and were later eliminated from all tested tissues. Bioactive glass, however, affected the implanted cells negatively. When it was present in the scaffold no donor cells were found in any of the tested host tissues. Bioactive glass S53P4 was found to support both osteoblastic and osteoclastic phenotype of bone marrow derived cells, but it was resistant to the resorbing effect of osteoclastic bone marrow derived cells, showing that bioactive glass is rather dissolved through physicochemical reactions than resorbed by cells. Fast-dissolving silica sol gel in microparticulate form was found to increase collagen formation by bone marrow derived cells, while slow dissolving silica microparticles enhanced their proliferation, suggesting that the dissolution rate of silica controls the response of bone marrow derived cells.

Health-related quality of life in school children: validation of instrument, child self assessment, parent-proxy assessment and school nursing documentation of health check-ups

The aims of this study were to validate an international Health-Related Quality of Life (HRQL) instrument, to describe child self and parent-proxy assessed HRQL at child age 10 to 12 and to compare child self assessments with parent-proxy assessments and school nursing documentation. The study is part of the Schools on the Move –research project. In phase one, a cross-cultural translation and validation process was performed to develop a Finnish version of Pediatric Quality of Life Inventory™ 4.0 (PedsQL™ 4.0). The process included a two-way translation, cognitive interviews (children n=7, parents n=5) and a survey (children n=1097, parents n=999). In phase two, baseline and follow-up surveys (children n=986, parents n=710) were conducted to describe and compare the child self and parent-proxy assessed HRQL in school children between the ages 10 and 12. Phase three included two separate data, school nurse documented patient records (children n=270) and a survey (children n=986). The relation between child self assessed HRQL and school nursing documentation was evaluated. Validity and reliability of the Finnish version of PedsQL™ 4.0 was good (Child Self Report α=0.91, Parent-Proxy Report α=0.88). Children reported lower HRQL scores at the emotional (mean 76/80) than the physical (mean 85/89) health domains and significantly lower scores at the age of 10 than 12 (dMean=4, p=<0.001). Agreement between child self and parent-proxy assessment was fragile (r=0,4, p=<0.001) but increased as the child grew from age 10 to 12 years. At health check-ups, school nurses documented frequently children’s physical health, such as growth (97%) and posture (98/99%) but seldom emotional issues, such as mood (2/7%). The PedsQLTM 4.0 is a valid instrument to assess HRQL in Finnish school children although future research is recommended. Children’s emotional wellbeing needs future attention. HRQL scores increase during ages between childhood and adolescence. Concordance between child self and parent-proxy assessed HRQL is low. School nursing documentation, related to child health check-ups, is not in line with child self assessed HRQL and emotional issues need more attention.

The regulation and function of collagenase-3 (MMP-13) in cutaneous wound healing and squamous cell carcinoma

Matrix metalloproteinase-13 (MMP-13) is a potent proteolytic enzyme, whose expression has been previously associated with fetal bone development and postnatal bone remodeling and with adult gingival wound healing. MMP-13 is also known to be involved in the growth and invasion of various cancers including squamous cell carcinoma (SCC) of the skin. The aim of this study was to further elucidate the function and regulation of MMP-13 in wound repair and cancer. In this study, it was shown that fetal skin fibroblasts express MMP-13 in response to transforming growth factor-β in a p38 MAP kinase dependent manner. In addition, MMP-13 was found to be expressed in vivo by wound fibroblasts in human fetal skin grafted on SCID mice. Adenovirally delivered expression of MMP-13 enhanced collagen matrix contraction by fibroblasts in vitro in association with altered cytoskeletal structure, enhanced proliferation and survival. These results indicate that MMP-13 is involved in cell-mediated collagen matrix remodeling and suggest a role for MMP-13 in superior matrix remodeling and scarless healing of fetal skin wounds. Using an MMP-13 deficient mouse strain, it was shown that MMP-13 is essential for the normal development of experimental granulation tissue in mice. MMP-13 was implicated in the regulation of myofibroblast function and angiogenesis and the expression of genes involved in cellular proliferation and movement, immune response, angiogenesis and proteolysis. Finally, epidermal mitogen, keratinocyte growth factor (KGF) was shown to suppress the malignant properties of skin SCC cells by downregulating the expression of several target genes with potential cancer promoting properties, including MMP-13, and by reducing SCC cell invasion. These results provide evidence that MMP-13 potently regulates cell viability, myofibroblast function and angiogenesis associated with wound healing and cancer. In addition, fibroblasts expressing MMP-13 show high collagen reorganization capacity. Moreover, the results suggest that KGF mediates the anti-cancer effects on skin SCC

Päivystyshoitotyön osaaminen valmistuvien sairaanhoitajaopiskelijoiden arvioimana

Potilaan hoitamisessa korostuvat mm. triagen tekeminen, potilaan voinnin seuranta ja hoitoa koskevien päätösten tekeminen nopeasti potilaan voinnin mukaan sekä potilaan jatkohoidon turvaaminen. Tämä kaksivaiheinen koulutustutkimus kohdistui päivystyshoitotyön osaamiseen. Tutkimuksen ensimmäisessä vaiheessa määriteltiin päivystyshoitotyön osaaminen ja toisessa vaiheessa arvioitiin valmistuvien sairaanhoitajaopiskelijoiden päivystyshoitotyön osaamista ja osaamiseen yhteydessä olevia tekijöitä. Osaamisen arvioinnin suorittivat opiskelijat itse ja vertailuperustana opiskelijoiden päivystyshoitotyön osaamiselle käytettiin ammatissa toimivien sairaanhoitajien päivystyshoitotyön osaamista. Tutkimuksen tavoitteena oli arvioinnin perusteella määrittää päivystyshoitotyön osaamisen nykytaso ja tehdä tarvittavat ehdotukset päivystyshoitotyön osaamisen kehittämiseen. Tutkimuksen ensimmäisessä vaiheessa (2006–2012) tiedonkeruumenetelminä oli kirjallisuuskatsaus ja asiantuntija-arviointi hyödyntäen delphi-menetelmää. Kirjallisuuskatsauksen perusteella muodostettiin päivystyshoitotyön osaamista kuvaavat pääkategoriat, yläkategoriat ja alakategoriat.Alakategoriat (n=61) annettiin asiantuntijoille (sairaanhoitajat, opettajat, ylihoitajat) arvioitavaksi.Kaksivaiheisen asiantuntija-arvioinnin perusteella muodostui 92 päivystyshoitotyön osaamista kuvaavaa alakategoriaa. Tutkimuksen toisessa vaiheessa (2007–2012) valmistuvien suomalaisten sairaanhoitaja-opiskelijoiden (N=382, n=208, vastausprosentti 55 %) päivystyshoitotyön osaamista arvioitiin tätä tutkimusta varten kehitetyllä mittarilla (Päivystyshoitotyön osaaminen -mittari). Mittari perustui tutkimuksen ensimmäisessä vaiheessa muodostettuun määrittelyyn päivystyshoitotyön osaamisesta. Osaamista mitattiin VAS-janalla (asteikko 0–100) arvon 100 ollessa optimaalinen taso, johon pyrittiin. Sairaanhoitajaopiskelijoiden tavoiteltavaksi osaamisen tasoksi asetettiin 80 olettaen opiskelijoiden osaamisen vielä kehittyvän työkokemuksen myötä. Ammatissa toimivien sairaanhoitajien (N=586, n=280, vastausprosentti 48 %) itsearvioitua osaamista käytettiin vertailuperustana opiskelijoiden osaamiselle. Aineisto analysoitiin tilastollisin menetelmin. Valmistuvien sairaanhoitajaopiskelijoiden itsearvioitu päivystyshoitotyön osaaminen oli alle tavoiteltavan osaamisen tason. Opiskelijoilla oli mielestään eniten eettistä osaamista sekä vuorovaikutus- ja yhteistyöosaamista ja vähiten päätöksenteko-osaamista ja kliinistä osaamista. Myös ammatissa toimivilla sairaanhoitajilla oli mielestään eniten vuorovaikutus- ja yhteistyöosaamista. Vähiten heillä oli ohjausosaamista ja päätöksenteko-osaamista. Sairaanhoitajilla oli tilastollisesti merkitsevästi enemmän päivystyshoitotyön osaamista kuin opiskelijoilla. Opiskelijoiden päivystyshoitotyön osaamista selitti eniten aikaisempi terveysalan tutkinto. Päivystyshoitotyön osaamisen kehittämisehdotukset kohdistuvat ammatillisen peruskoulutuksen ja täydennyskoulutuksen opetuksen sisältöihin ja määrään, opetus- ja opiskelumenetelmiin, osaamisen arviointiin sekä urasuunnitteluun. Jatkotutkimusehdotukset kohdistuvat päivystyshoitotyön osaamisen määrittelyn ja osaamista arvioivan mittarin edelleen kehittämiseen, erilaisten arviointimenetelmien kehittämiseen sekä osaamiseen yhteydessä olevien tekijöiden edelleen tutkimiseen.