State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

An analytic approach to distribution logistics strategic management

Logistics management is increasingly being recognised by many companies to be of critical concern. The logistics function includes directly or indirectly many of the new areas for achieving or maintaining competitive advantage that companies have been forced to develop due to increasing competitive pressures. The key to achieving a competitive advantage is to manage the logistics function strategically which involves determining the most cost effective method of providing the necessary customer service levels from the many combinations of operating procedures in the areas of transportation, warehousing, order processing and information systems, production, and inventory management. In this thesis, a comprehensive distribution logistics strategic management process is formed by integrating the periodic strategic planning process with a continuous strategic issues management process. Strategic planning is used for defining the basic objectives for a company and assuring co operation and synergy between the different functions of a company while strategic issues management is used on a continuous basis in order to deal with environmental and internal turbulence. The strategic planning subprocess consists of the following main phases: (1) situational analyses, (2) defining the vision and strategic goals for the logistics function, (3) determining objectives and strategies, (4) drawing up tactical action plans, and (5) evaluating the implementation of the plans and making the needed adjustments. The aim of the strategic issues management subprocess is to continuously scan the environment and the organisation for early identification of the issues having a significant impact on the logistics function using the following steps: (1) the identification of trends, (2) assessing the impact and urgency of the identified trends, (3) assigning priorities to the issues, and (4) planning responses to the, issues. The Analytic Hierarchy Process (AHP) is a systematic procedure for structuring any problem. AHP is based on the following three principles: decomposition, comparative judgements, and synthesis of priorities. AHP starts by decomposing a complex, multicriteria problem into a hierarchy where each level consists of a few manageable elements which are then decomposed into another set of elements. The second step is to use a measurement methodology to establish priorities among the elements within each level of the hierarchy. The third step in using AHP is to synthesise the priorities of the elements to establish the overall priorities for the decision alternatives. In this thesis, decision support systems are developed for different areas of distribution logistics strategic management by applying the Analytic Hierarchy Process. The areas covered are: (1) logistics strategic issues management, (2) planning of logistic structure, (3) warehouse site selection, (4) inventory forecasting, (5) defining logistic action and development plans, (6) choosing a distribution logistics strategy, (7) analysing and selecting transport service providers, (8) defining the logistic vision and strategic goals, (9) benchmarking logistic performance, and (10) logistic service management. The thesis demonstrates the potential of AHP as a systematic and analytic approach to distribution logistics strategic management.

Five Baltic Ports Togehter: Forecasts, Trends and Recommendations

The ports of Stockholm, Tallinn, Helsinki, Naantali and Turku play key roles in making the Central Baltic region accessible. Effective, competitive, eco-friendly and safe port procedures and solutions for the transportation of goods are of major importance for trade in the Baltic Sea region. This report presents the most essential results and recommendations of the PENTA project, which focused on how ports could better comprehend and face current and future challenges facing carriage of goods by sea. Each of the four work packages (WPs) of the PENTA project analysed the changes from a different perspective. WP2 focused on traffic flows between the PENTA ports. Its main emphasis was on the ports, shipowners, and logistics companies that are the key parties in freight transport and on the changes affecting the economy of those ports. In WP3 noise as an environmental challenge for ports was investigated and the analysis also shed light on the relationship between the port and the city. In WP4 procedures related to safety, security and administrative procedures were researched. The main emphasis was on identifying the requirements for the harmonisation of those procedures. Collaboration is highlighted throughout this report. In order to prepare for the future, it was found that ports need to respond to growing competition, increasing costs and shifts in customer demand by strengthening their existing partnerships with other actors in the maritime cluster. Cargo and passenger transport are the main sources of income for most ports. Cargo traffic between the PENTA ports is expected to grow steadily in the future and the outlook for passenger traffic is positive. However, to prepare for the future, ports should not only secure the core activities which generate revenue but also seek alternative ways to make profit. In order to gain more transit traffic, it is suggested that ports conduct a more thorough study of the future requirements for doing business with Russia. The investigation of noise at ports revealed two specific dilemmas that ports cannot solve alone. Firstly, the noise made by vessels and, secondly, the relationship between the port and the surrounding city. Vessels are the most important single noise source in the PENTA ports and also one of the hardest noise sources to handle. Nevertheless, port authorities in Finland and Sweden are held responsible for all noise in the port area, including noise produced by vessels, which is noise the port authority can only influence indirectly. Building housing by waterfront areas close to ports may also initiate disagreements because inhabitants may want quiet areas, whereas port activities always produce some noise from their traffic. The qualitative aspects of the noise question, cooperating with the stakeholders and the communicating of issues related to noise are just as important. We propose that ports should follow the logic of continuous improvement in their noise management. The administrative barriers discussed in this report are mainly caused by differences in international and national legislation, variations in the customs procedures of each country, the incompatibility of the IT systems used in maritime transport, noncompliance with regulations regarding dangerous goods, and difficulties in applying Schengen regulations to vessels from non-EU countries. Improving the situation is out of the hands of the ports to do alone and requires joint action on a variety of levels, including the EU, national authorities and across administrative borders.

Integration of Logistics Systems across Companies’ Borders

The growth of the companies working in the Logistics area has raised the need for using several Logistics systems that can meet the increased requirements in business processes. Different companies may use one or more Logistics systems internally and may use different Logistics systems that other collaborated companies use. Furthermore, these Logistics systems are required to communicate with each other in order to process and manage the flow of the information. Integrating the Logistics systems is beneficial as it allows interaction between the whole systems and services instead of the need to replace them. In addition, it improves the efficiency, lowers the possible errors in the supply chain, reduces the costs and facilitates the access of suppliers and customers to the information. This in turn leads to better relationships with both suppliers and customers. Usually local integration of several Logistics systems is not very difficult, especially that mostly the companies buy their system from a single source. However, the case is different for integrating several logistics systems across the companies’ borders. In this case, there are many factors play major roles in limiting the integration, such as using different systems and different output. This thesis highlights these factors and challenges, demonstrates some solutions for the logistics inter-organizational integration from the perspective of information systems and presents some approaches for integrating these systems. There are many studies about the integration inside a company but fewer studies focused about the technical side and the information systems integration across company’s borders or what is called inter-organizational integration. This study is a literature review that aims at illustrating the challenges, the requirements and some approaches in inter-organizational logistics information systems integration of logistics systems across the companies’ borders.

Relative Technical Efficiency of European Transportation Systems

Talouden kasvaessa myös tavarankuljetusmäärät kasvavat. Kuljetusjärjestelmät ja niiden sujuva toiminta on erittäin tärkeää taloudellisen kasvun kannalta tällä hetkellä, ja se tulee olemaan yhä tärkeämpää tulevaisuudessa. Tulevaisuudessa tarvitaan kokonaisvaltainen ja selkeästi tehokkaampi kuljetusjärjestelmä, mikäli tulevaisuuden kuljetusvirrat halutaan hoitaa kestävästi. Tässä opinnäytetyössäni tutkin kolmen eurooppalaisen kuljetusjärjestelmän (rautatiet, lentoliikenne ja konttiliikenne meritse) suhteellista teknistä tehokkuutta ja menetelmänä on data envelopment analysis (DEA). Vertailtaessa kuljetusjärjestelmiä löytyi suuria eroja kuljetusmuotojen välille. lentoyhtiöt suoriutuivat huomattavan tasaisesti eli tehokkaiden ja ei-tehokkaiden toimijoiden välillä ei ollut suuria eroja. Rautatiepuolella erot venyivät huomattavan suuriksi niin eri yritysten välillä kuin jopa saman yrityksen sisällä eri vuosina. Pikaisemmassa laivayhtiöiden tarkastelussa erot niiden välillä olivat lähes yhtä pieniä kuin lentoyhtiöiden välillä. Tarkasteltaessa omistajuuden vaikutusta lentoyhtiöiden toiminnassa huomattiin, että yksityisessä omistuksessa olevat yritykset olivat huomattavasti tehokkaampia matkustajien kuljettamisessa. Rahtipuolella merkittäviä eroja ei havaittu. Merkittävät korrelaatiot eri mallien välillä antoivat joitain viitteitä myös kuljetuspoliittiseen päätöksentekoon; investoinnit matkustajienkuljetuksiin raiteilla parantaisivat koko rautatiepuolen teokkuutta, mutta myös samalla lentopuolen matkustajakuljetuksen tehokkuutta.

Value added logistical support service: logistics cost structure and performance in the new concept. Part 3

The aim of this study is to present an Activity-Based Costing spreadsheet tool for analyzing the logistics costs. The tool can be used both by customer-companies and logistics service providers. The study discusses the influence of different activity models on costs. Additionally this paper discusses about the logistical performance across the total supply chain This study is carried out using ananalytical research approach and literature material has been used for supplementing the concerned research approach. Cost structure analysis was based on the theory of activity-based management. This study was outlined to spare part logistics in machine-shop industry. The outlines of logistics services and logisticalperformance discussed in this report are based on the new logistics business concept (LMS-concept), which has been presented earlier in the Valssi-project. Oneof the aims of this study is to increase awareness of different activity modelson logistics costs. The report paints an overall picture about the business environment and requirements for the new logistics concept.

Web user interface architecture for advanced planning and scheduling systems Case: Nokia Demand / Supply Planning Applications

In modem hitec industry Advanced Planning and Scheduling (APS) systems provide the basis for e-business solutions towards the suppliers and the customers. One objective of this thesis was to clarify the modem supply chain management with the APS systems and especially concentrate on the area of Collaborative Planning. In order Advanced Planning and Scheduling systems to be complete and usable, user interfaces are needed. Current Visual Basic user interfaces have faced many complaints and arguments from the users as well as from the development team. This thesis is trying to analyze the reasons and causes for the encountered problems and also provide ways to overcome them. The decision has been made to build the new user interfaces to be Web-enabled. Therefore another objective of this thesis was to research and find suitable technologies for building the Web-based user interfaces for Advanced Planning and Scheduling Systems in Nokia Demand/Supply Planning business area. Comparison between the most suitable technologies is made. Usability issues of Web-enabled user interfaces are also covered. The empirical part of the thesis includes design and implementation of a Web-based user interface with the chosen technology for a particular APS module that enables Collaborative Planning with suppliers.

Managing material flows and improving performance in a component supplier’s internal supply chain

Tämä diplomityö tehtiin osana Componenta Cast Componentsin kolmivuotista toimitusketjujen kehitysprojektia. Työn tavoitteena oli kuvata tyypillinen yrityksen sisäinen toimitusketjuprosessi ja tehdä alustava suorituskykyanalyysi valimon ja konepajan väliseen logistiseen prosessiin liittyen. Tarkoituksena oli myös löytää kehityskohteita materiaali- ja tietovirtojen hallinnassa näiden tuotantoyksiköiden välillä. Logistiikkaan, toimitusketjujen hallintaan ja toimitusketjun suorituskyvyn mittaamiseen liittyvän kirjallisuustutkimuksen sekä käytännön perusteella valittiin sopivat analyysimenetelmät. Näitä menetelmiä hyödynnettiin tilaustoimitus – prosessin kuvaamisessa sekä suorituskyvyn analysoinnissa yrityksen sisäisessä toimitusketjussa. Luonnollisena jatkona kehitettiin ja pantiin käytäntöön toimitusketjua synkronoiva imutyyppinen tuotannon- ja materiaalinohjausmenetelmä. Diplomityöprojektin aikana kehitettiin myös apuvälineet käyttöönotetun menetelmän asianmukaista hyödyntämistä varten. Diplomityöprojektissa otettiin ensimmäiset askeleet kohti integroitua sisäistä toimitusketjua. Uuden tuotannon- ja materiaalinohjausmenetelmän standardisointi muihin menetelmiin yhdistettynä, sekä toimitusketjun avainmittarien jatkokehitys on jo alkanut. Läpimenoaikoja lyhentämällä ja synkronoidun, läpinäkyvän kysyntä-tarjontaketjun avulla integroitumisen astetta voidaan nostaa edelleen. Poikkiorganisatorinen kehitys ja johtaminen toimitusketjussa on avainedellytys menestykseen.

Transport Resource Management within UMTS Radio Network Subsystem

Tällä hetkellä haastavin telekommunikaatioteollisuuden tutkimus – ja kehitystoiminta on keskittynyt kolmannen sukupolven matkapuhelinjärjestelmien ympärille. Järjestelmien standardointityössä on saatu aikaiseksi ensimmäiset vakaat spesifikaatioversiot ja kaupallista toimintaa ollaan parhaillaan aloittelemassa Japanissa ja Euroopassa. Eräs kolmannen sukupolven järjestelmistä on UMTS (Universal Mobile Telecommunications System). Tämä diplomityö antaa yleiskuvan UMTS järjestelmästä ja sen eri verkkoelementtien toiminnallisuuksista. Päähuomio on kiinnitetty radioverkkojärjestelmään (UMTS Terrestrial Radio Access Network) ja erityisesti sen radioaliverkkojärjestelmään (Radio Network Subsystem), joka koostuu radioverkonohjaimesta (Radio Network Controller) ja joukosta siihen kuuluvia tukiasemia (Node B). Radioverkonohjain ja tukiasemat on yhdistetty avoimen rajapinnan kautta jota kutsutaan Iub -rajapinnaksi. Rajapinta tarjoaa radioverkonohjaimelle mahdollisuuden kontrolloida tukiasemia signalointiviestien avulla ja mahdollistaa tehokkaan ja luotettavan käyttäjätiedon siirron radioaliverkkojärjestelmän sisällä. Tämän diplomityön pääasiallinen sisältö on siirtoresurssien hallinta Iub -rajapinnan ylitse. Työssä esitellään ja selitetään siirtoverkon arkkitehtuuri. Myös kaikki Iub:ssä sijaitsevat protokollat ja toiminnalliset yksiköt jotka vaikuttavat siirtoresurssien hallintaan esitellään ja kuvataan yksityiskohtaisesti. Päähuomio on kiinnitetty sovellusprotokolliin sekä rajapinnan siirtoverkko- että radioverkkokerroksella sekä näiden protokollien väliseen vuorovaikutukseen. Kyseiset protokollat ovat Node B Application Part (NBAP) ja Access Link Control Application Part (ALCAP). Työn toteutusosassa käydään lävitse NBAP –protokollan prototyypin ja Node B Manager –toiminnallisen yksikön prototyypin implementaatio.

Testing and Monitoring Mill Connection Messages

Tarve tälle työlle on noussut sanomapalvelinsoveluksissa (servers) esiintyvistä ongelmista. Sanomapalvelinsovelluksia käytetään lähettämään ja vastaanottamaan sanomia paperiteollisuuden myynnin ja jakelun järjestelmässä maantieteellisesti erillään olevista paperiteollisuuden tehtaista. Sanomapalvelinsovelusten kunnollinen toimivuus on tärkeää koko järjestelmän toimivuuden kannalta, koska nämä palvelimet käsittelevät päivittäin tuhansia sanomia, jotka sisältävät merkityksellistä järjestelmätietoa. Tässä työssä on tutkittu mahdollisia toteutustekniikoita ja näihin tutkimuksiin pohjautuen toteutettu työkalut sanomapalvelinsovellusten testaukseen ja valvontaan. Sovellus-arkkituuritekniikoita tutkittaessa tutkimus rajattiin 3-tasoarkkitehtuuritekniikkaan, erityisesti TUXEDOTM -järjestelmätekniikkaan, koska toteutettavaa sovellusta käytetään hajautetussa sovellusympäristössä. Sovellusasiakkaan (client) toteutusta varten tutkittiin ja vertailtiin XML-tekniikkaa ja Microsoft Visual C++ -tekniikkaa käytettynä Tieto-Enatorin Phobos Interaktiivisen C++ -luokkakirjaston kanssa. XML-tekniikoita sekä Visual C++ ja Phobos-luokkakirjasto –tekniikkaa tutkittiin niiltä osin, mitä tarvittiin sanomamerkkijonojen katseluun. XML-tietokantatekniikoita tutkittiin mahdollisena vaihtoehtona tietokanta ja sovelluspalvelintekniikalle. Työn ensimmäisenä tavoitteena oli toteuttaa työkalu sanomapalvelinsovellusten testaamiseen. Toisena tavoitteena oli toteuttaa työkalu sanomien sisällön oikeellisuuden valvontaan. Kolmantena tavoitteena oli analysoida olemassaolevaa sanomavirheiden valvontasovellusta ja kehittää sitä eteenpäin. Diplomityön tuloksena toteutettiin sovellus sanomapalvelinsovellusten testaamiseen ja valvontaan. Tutkituista asiakassovelustekniikoista valittiin toteutus-tekniikaksi MS Visual C++ käytettynä Phobos Interaktiivisen C++ luokkakirjaston kanssa tekniikan tunnettavuuden vuoksi. 3-taso TUXEDOTM-tekniikka valittiin sovelluksen arkkitehtuuriksi. Lisäksi löydettiin parannuksia olemassa oleviin sanoma-virheiden valvontatoimintoihin. Tutkitut toteutustekniikat ovat yleisiä ja niitä voidaan käyttää, kun toteutetaan samanlaisia sovelluksia samanlaisiin sovellusympäristöihin.

Managing the Front End of Innovation in a Networked Company Environment - Combining Strategy, Processes and Systems of Innovation

The objective of the thesis is to enhance the understanding about the management of the front end phases of the innovation process in a networked environment. The thesis approaches the front end of innovation from three perspectives, including the strategy, processes and systems of innovation. The purpose of the use of different perspectives in the thesis is that of providing an extensive systemic view of the front end, and uncovering the complex nature of innovation management. The context of the research is the networked operating environment of firms. The unit of analysis is the firm itself or its innovation processes, which means that this research approaches the innovation networks from the point of view of a firm. The strategy perspective of the thesis emphasises the importance of purposeful innovation management, the innovation strategy of firms. The role of innovation processes is critical in carrying out innovation strategies in practice, supporting the development of organizational routines for innovation, and driving the strategic renewal of companies. The primary focus of the thesis from systems perspective is on idea management systems, which are defined as a part of innovation management systems, and defined for this thesis as any working combination of methodology and tools (manual or IT-supported) that enhance the management of innovations within their early phases. The main contribution of the thesis are the managerial frameworks developed for managing the front end of innovation, which purposefully “wire” the front end of innovation into the strategy and business processes of a firm. The thesis contributes to modern innovation management by connecting the internal and external collaboration networks as foundational elements for successful management of the early phases of innovation processes in a dynamic environment. The innovation capability of a firm is largely defined by its ability to rely on and make use of internal and external collaboration already during the front end activities, which by definition include opportunity identification and analysis, idea generation, profileration and selection, and concept definition. More specifically, coordination of the interfaces between these activities, and between the internal and external innovation environments of a firm is emphasised. The role of information systems, in particular idea management systems, is to support and delineate the innovation-oriented behaviour and interaction of individuals and organizations during front end activities. The findings and frameworks developed in the thesis can be used by companies for purposeful promotion of their front end processes. The thesis provides a systemic strategy framework for managing the front end of innovation – not as a separate process, but as an elemental bundle ofactivities that is closely linked to the overall innovation process and strategy of a firm in a distributed environment. The theoretical contribution of the thesis relies on the advancement of the open innovation paradigm in the strategic context of a firm within its internal and external innovation environments. This thesis applies the constructive research approach and case study methodology to provide theoretically significant results, which are also practically beneficial.

Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Toimitustäsmällisyyden suunnittelumenetelmä

Tutkimuksen ongelma on toimitusten ajallisen täsmällisyyden heikkeneminen kuljetuspolkujen pidentyessä ja erillisten suoritteitten lukumäärän kasvaessa. Näin usein tapahtuu toiminnan kansainvälistyessä. Tutkimuksen tavoitteena on kehittää menetelmä, jolla toimitusten ajallista täsmällisyyttä voidaan suunnitella ja ohjata sekä sen tavoitteet saavuttaa yllä todetusta kehityksestä huolimatta. Aluksi tutkimuksessa on jäsennetty toimitustäsmällisyyden nivoutumista yritys ja markkinointistrategioiden sekä tavoitteiden kokonaisuuteen. Täsmällisyyden merkitystä on myös tarkasteltu yleisesti yritysten kilpailutekijänä. Seuraavaksi on kehitetty interaktiivinen menetelmä, jonka avulla voidaan suunnitella yksittäisen toimituksen ajallista täsmällisyyttä. Toimituksen suoritteet ja niiden vaihtoehdot on kuvattu kvantifioituna, suunnattuna graafina eli verkkona. Ensin on tarkasteltu tilannetta, jossa suoritteiden kestot ovat vakiot ja sitten suoritteiden keston hajonnan huomioon ottavaa menetelmää, jonka avulla on löydettävissä kustannuksiltaan halvin, riittävän täsmällinen ja luotettava ratkaisu. Menetelmän soveltamista on tarkasteltu yleisesti sekä tulo että lähtölogistiikassa, dynaamisessa toimitussuoritetta koskevassa paatoksen teossa ja erilaisissa erityistapauksissa. Täsmällisyystavoitteitten asettamista ja muuttujia on tarkasteltu yleisesti ja käytännön soveltamisen kannalta. Käytännön soveltamista on kokeiltu valitun kohdeyrityksen esimerkkitilanteessa. Menetelmän toimivuutta on testattu simuloimalla sen ja perinteisesti suunniteltujen tehdastoimitusten sekä paikallisvarastosta tehtävien toimitusten tuloksia ja kustannuksia sekä vertaamalla niitä keskenään. Analyysin lopuksi on tarkasteltu esimerkkitilannetta logistisena kokonaisuutena lisäämällä vertailuun muitten kustannuskomponenttien ja lisäarvon vaikutus. Lopussa on käsitelty menetelmän käytännön soveltuvuusprofiilia ja jatkotutkimusaiheita. Yhteenvetona on todettu kehitetyn menetelmän tekevän täsmällisyyttä korostavan toimitusstrategian luotettavan toteuttamisen mahdolliseksi. Sen on taas todettu voivan olla edullinen vaihtoehto, jos täsmällisyydellä on markkina arvoa ja merkitystä pitkän tähtäimen menestystekijänä.

Biopolttoaineiden saatavuus ja hankintalogistiikka Kaakkois-Suomessa

"Biopolttoaineiden saatavuus ja hankintalogistiikka Kaakkois-Suomessa" -hankkeen tavoitteena oli tuottaa ajantasaista ja paikkaan sidottua tietoa energiatuotantoon soveltuvan biomassan saatavuudesta ja biomassapotentiaalin tehokkaan käytön mahdollistavasta logistiikkajärjestelmästä Kaakkois-Suomen alueella. Tarkastelussa mukana olleet polttoaineet eli metsä- ja peltobiomassat sekä turve ovat ns. paikallisia polttoaineita, joiden hankinta tapahtuu maaseudulta, ensisijaisesti mahdollisimman läheltä kutakin käyttöpaikkaa. Hankkeessa tutkittiin mahdollisuuksia lisätä paikallista polttoaineenhankintaa, kuljetusmääriä ja -kalustoa järkevästi 2010-luvulla toteutettavan energiapolitiikan myötä kasvavan polttoainetarpeen puitteissa. Rautatie- ja vesitiekuljetusten hyödyntämistä logistiikassa tutkittiin kahden tapaustutkimuksen avulla. Tutkittavia asioita olivat myös tuotantoketjujen lisääntyvä työvoimatarve sekä maantieteellisesti laajenevan raaka-ainehankinnan kasvihuonekaasupäästöistä aiheutuvat ympäristövaikutukset. Tärkeimpinä tuloksina saatiin tietoa siitä, kuinka laajalle alueelle biopolttoaineiden hankinta eri asiantilojen vallitessa Kaakkois-Suomen alueella ulottuu, ja millaisia hankintalogistiikkaan liittyviä ratkaisuja voidaan ottaa käyttöön alueellisen polttoainepulan muodostuessa. Logistiikan kannalta Kaakkois-Suomen etuja ovat monipuoliset kuljetusverkostot, mutta toisaalta varsinkin hyvät yhteydet ulkomaille rajoittavat paikallisesti investointiaktiivisuutta bioenergian tuotanto- ja käsittelykaluston osalta. Lisäksi maaseudun yrittäjien keskuudessa epävarmuutta aiheuttavat heilahtelevat raakapuumarkkinat ja muuttuva energiatukipolitiikka.