25 resultados para Logic of action
Helluntailaiset luokkakuvassa. uskontokulttuuri ja yksikön luokka-asema Turun Helluntaiseurakunnassa
Resumo:
Tässä tutkimuksessa analysoin sitä, miten helluntailainen uskontokulttuuri vaikuttaa yksilön valintoihin ja sen kautta siihen, mihin luokka-asemiin seurakuntalaiset ovat päätyneet Turun Helluntaiseurakunnassa. Tutkimus on uskontoantropologinen ja kuuluu uskontotieteen alaan. Siinä yhdistetään sosiologista luokkatutkimusta sekä rationaalisen valinnan ja toiminnan teorioita uskontoantropologisessa viitekehyksessä. Pääasialliseksi aineistoksi keräsin laajan etnografisen aineiston, joka koostuu systemaattisesta havainnoinnista, kyselyistä ja haastatteluista. Lisäksi olen tutkinut seurakunnan ja helluntailaisuutta koskevia arkistoja sekä kirjallisuutta. Tutkimuksen kohde on Turun helluntaiseurakunta, joka muodostaa tutkimusongelman kannalta mielekkään tutkimusasetelman. Tutkimus kertoo olennaista tietoa siitä, miten uskonto vaikuttaa yksilön valintoihin ja hänen yhteiskunnalliseen asemaansa. Tutkimusaineiston pohjalta laadin selittävän mallin kuvaamaan sitä prosessia, miten yksilöt tekevät valintojaan rationaalisina toimijoina eri kulttuurien vaikutuspiireissä. Antropologisena pohjana selitykselle toimii uskonnon rajojen rakentumisen, muuttamisen ja ylittämisen logiikka. Pyhän kategorisoinnin jäsentämä uskontokulttuuri ohjaa yksilöä suosimaan toisia kulttuureja, luokkakulttuureja ja tyylejä sekä vierastamaan toisia. Jos yksilö haluaa tehdä valinnan, joka nähdään arveluttavana, täytyy hänen oikeuttaa se kulttuurinsa sisäisillä symboleilla ja rituaaleilla. Turun Helluntaiseurakunnassa korostuvat auttamisen ja sivistämisen ammatit, kuten lääkäri, sairaanhoitaja ja opettaja. Nämä voidaan edelleen jäljittää seurakunnan opetuksiin sekä seurakuntalaisten käyttämiin diskursseihin ja oletuksiin hyväksytyistä elämäntyyleistä. Lisäksi diskursseissa korostuvat näkemykset ammatista kutsumuksena, koulutuksen itsestäänselvyys sekä asemaan liittyvän radikalismin välttäminen. Seurakunnan uskontokulttuurin keskiluokkaistava vaikutus näkyy ennen kaikkea toisen ja useamman polven helluntailaisissa, jotka sijoittuvat korkeampiin asemiin kuin ulkopuolelta kääntyneet. Seurakunnan uskontokulttuuri vähentää luokkatietoisuuden syntyä ja voi osaltaan ylläpitää yhteiskunnan luokkarakennetta, koska uskonnon ensisijaiset päämäärät eivät kohdistu yhteiskunnan rakenteen muuttamiseen Suomessa. Tutkimuksen mukaan yksilön omat ja häneen kohdistetut oletukset ja arvot, jotka hän kulttuurissa omaksuu, ohjaavat häntä myös kulttuurinsa näkökulmasta suosiollisiin asemiin.
Resumo:
This thesis focuses on the development of sustainable industrial architectures for bioenergy based on the metaphors of industrial symbiosis and industrial ecosystems, which imply exchange of material and energy side-flows of various industries in order to improve sustainability of those industries on a system level. The studies on industrial symbiosis have been criticised for staying at the level of incremental changes by striving for cycling waste and by-flows of the industries ‘as is’ and leaving the underlying industry structures intact. Moreover, there has been articulated the need for interdisciplinary research on industrial ecosystems as well as the need to extend the management and business perspectives on industrial ecology. This thesis addresses this call by applying a business ecosystem and business model perspective on industrial symbiosis in order to produce knowledge on how industrial ecosystems can be developed that are sustainable environmentally and economically. A case of biogas business is explored and described in four research papers and an extended summary that form this thesis. Since the aim of the research was to produce a normative model for developing sustainable industrial ecosystems, the methodology applied in this research can be characterised as constructive and collaborative. A constructive research mode was required in order to expand the historical knowledge on industrial symbiosis development and business ecosystem development into the knowledge of what should be done, which is crucial for sustainability and the social change it requires. A collaborative research mode was employed through participating in a series of projects devoted to the development of a biogas-for-traffic industrial ecosystem. The results of the study showed that the development of material flow interconnections within industrial symbiosis is inseparable from larger business ecosystem restructuring. This included a shift in the logic of the biogas and traffic fuel industry and a subsequent development of a business ecosystem that would entail the principles of industrial symbiosis and localised energy production and consumption. Since a company perspective has been taken in this thesis, the role of an ecosystem integrator appeared as a crucial means to achieve the required industry restructuring. This, in turn, required the development of a modular and boundary-spanning business model that had a strong focus on establishing collaboration among ecosystem stakeholders and development of multiple local industrial ecosystems as part of business growth. As a result, the designed business model of the ecosystem integrator acquired the necessary flexibility in order to adjust to local conditions, which is crucial for establishing industrial symbiosis. This thesis presents a normative model for the development of a business model required for creating sustainable industrial ecosystems, which contributes to approaches at the policy-makers’ level, proposed earlier. Therefore, this study addresses the call for more research on the business level of industrial ecosystem formation and the implications for the business models of the involved actors. Moreover, the thesis increases the understanding of system innovation and innovation in business ecosystems by explicating how business model innovation can be the trigger for achieving more sustainable industry structures, such as those relying on industrial symbiosis.
Resumo:
The emergence of the idea of multiculturalism in Swedish public discourse and social science in the latter half of the 1960s and introduction of official multiculturalism in 1975 constituted a major intellectual and political shift in the post-war history of Sweden. The ambition of the 1975 immigrant and minority policy to enable the preservation of ethno-cultural minorities and to create a positive attitude towards the new multicultural society among the majority population was also incorporated into Swedish cultural, educational and media policies. The rejection of assimilationism and the new commitment to ethno-cultural diversity, the multicultural moment, has earned Sweden a place on the list of the early adopters of official multiculturalism, together with Canada and Australia. This compilation thesis examines the origins and early post-war history of the idea of multiculturalism as well as the interplay between idea and politics in the shift from a public ideal of homogeneity to an ideal of multiculturalism in Sweden. It does so from a range of conceptual, comparative, transnational, and biographical perspectives. The thesis consists of an introduction (Part I) and four previously published studies (Part II). The primary research result of the thesis concerns the agency involved in the break-through and formal establishment of the idea of multiculturalism in Sweden. Actors such as ethnic activists, experts and officials were instrumental in the introduction and establishment of multiculturalism in Sweden, as they also had been in Canada and in Australia. These actors have, however, not previously been recognized and analysed as significant idea-makers and political agents in the case of Sweden. The intertwined connections between activists, social scientists, linguists, and officials facilitated the transfer of the idea of multiculturalism from a publically contested idea to public policy via the way of The Swedish Trade Union Confederation, academia and the Royal Commission of Immigration. The thesis furthermore shows that the political success of the idea of multiculturalism, such as it was within the limits of the universalist social democratic welfare state, was dependent on whom the claims-makers were, the status and positions they held, and the way the idea of multiculturalism was conceptualised and used. It was also dependent on the migratory context of labour immigration in the 1960s and 1970s and on whose behalf the advocates of multiculturalism made their claims. The majority of the labour immigrants were Finnish citizens from the former eastern half of the kingdom of Sweden who were net contributors to the Swedish welfare state. This facilitated the recognition of their ethno-cultural difference, and, following the logic of universalism, the ethno-cultural difference of other minority groups in Sweden. The historical significance of the multicultural moment is still evident in the contemporary immigration and integration policies of Sweden. The affirmation of diversity continues to set Sweden apart from the rest of Europe, now more so than in the 1970s, even though the migratory context has changed radically in the last 40 years.
Resumo:
The importance of university-company collaboration has increased during the last decades. The drivers for that are, on the one hand, changes in business logic of companies and on the other hand the decreased state funding of universities. Many companies emphasize joint research with universities as an enabling input to their development processes, which aim at creating new innovations, products and wealth. These factors have changed universities’ operations and they have adopted several practices of dynamic business organizations, such as strategic planning, monitoring and controlling methods of internal processes etc. The objective of this thesis is to combine different characteristics of successful university-company partnership and its development. The development process starts with identifying potential partners in the university’s interest group, which requires understanding the role of different partners in the innovation system. Next, in order to find a common development basis, matching the policy and strategy between partners is needed. The third phase is to combine the academic and industrial objectives of a joint project, which is a typical form of university-company collaboration. The optimum is a win-win situation where both partners, universities and companies, can get addedvalue. For the companies added value typically means access to new research results before their competitors. For the universities added value offers a possibility to carry on high level scientific work. The research output in the form of published scientific articles is evaluated by the international science community. Because the university-company partnership is often executed by joint projects, the different forms of this kind of projects is discussed in this study. The most challenging form of collaboration is a semi-open project model, which is not based on bilateral activities between universities and companies but on a consortium of several universities, research institutes and companies. The universities and companies are core actors in the innovation system. Thus the discussion of their roles and relations to public operators like publicly funded financiers is important. In the Finnish innovation system there are at least the following doers executing strategies and policies: EU, Academy of Finland and TEKES. In addition to these, Strategic Centres for Science, Technology and Innovation which are owned jointly by companies, universities and research organizations have a very important role in their fields of business. They transfer research results into commercial actions to generate wealth. The thesis comprises two parts. The first part consists of an overview of the study including introduction, literature review, research design, synthesis of findings and conclusions. The second part introduces four original research publications.
Resumo:
Polyketides are a diverse group of natural products produced in many bacteria, fungi and plants. These metabolites have diverse biological activities and several members of this group are in clinical use as antibiotics, anticancer agents, antifungals and immunosuppressants. The different polyketides are produced by polyketide synthases, which catalyze the condensation of extender units into various polyketide scaffolds. After the biosynthesis of the polyketide backbone, more versatility is created to the molecule by tailoring enzymes catalyzing for instance hydroxylations, methylations and glycosylations. Flavoprotein monooxygenases (FPMO) and short-chain alcohol dehydrogenases/reductases (SDR) are two enzyme families that catalyze unusual tailoring reactions in the biosynthesis of natural products. In the experimental section, functions of homologous FPMO and SDR tailoring enzymes from five different angucycline pathways were studied in vitro. The results revealed how different angucyclinones are produced from a common intermediate and that FPMO JadH and SDR LanV are responsible for the divergence of jadomycins and landomycins, respectively, from other angucyclines. Structural studies of these tailoring enzymes revealed differences between homologous enzymes and enabled the use of structure-based protein engineering. Mutagenesis experiments gave important information about the enzymes behind the evolution of distinct angucycline metabolites. These experiments revealed a correlation between the substrate inhibition and bi-functionality in JadH homologue PgaE. In the case of LanV, analysis of mutagenesis results revealed that the difference between the stereospecificities of LanV and its homologues CabV and UrdMred is unexpectedly related to the conformation of the substrate rather than to the structure of the enzyme. Altogether, the results presented here have improved our knowledge about different steps of angucycline biosynthesis and the reaction mechanisms used by the tailoring enzymes behind these steps. This information can hopefully be used to modify these enzymes to produce novel metabolites, which have new biological targets or possess novel modes-of-action. The understanding of these unusual enzyme mechanisms is also interesting to enzymologists outside the field of natural product research.
Resumo:
The objective of this study is to increase understanding of the nature and role of trust in temporary virtual problem-solving teams engaged in real-life co-creation activities, while much of previous research has been conducted in student settings. The different forms and bases of trust, possible trust barriers and trust building actions, and perceived role of trust in knowledge sharing and collaboration are analyzed. The study is conducted as a qualitative case study in case company. Data includes interviews from 24 people: 13 from 3 different project teams that were going on during the study, 8 from already finalized project teams, and 3 founders of case company. Additional data consists of communication archives from three current teams. The results indicate that there were both knowledge-based and swift trust present, former being based on work-related personal experiences about leaders or other team members, and latter especially on references, disposition to trust and institution-based factors such as norms and rules, as well as leader and expert action. The findings suggest that possible barriers of trust might be related to lack of adaptation to virtual work, unclear roles and safety issues, and nature of virtual communication. Actions that could be applied to enhance trust are for example active behavior in discussions, work-related introductions communicating competence, managerial actions and face-to-face interaction. Finally, results also suggest that trust has a focal role as an enabler of action and knowledge sharing, and coordinator of effective collaboration and performance in temporary virtual problem-solving teams.
Resumo:
This study explores variegated means through which ports have become increasingly entangled in the planning logic of neoliberal innovation-driven economy. The research topic belongs to the academic disciplines of economics and human geography. The aim of the thesis is to analyse how the notion of innovation, adopted in a variety of supranational and national port policy documents, is deployed in operational port environment in two different ports of the Baltic Sea Region: the port of Stockholm, Sweden, and the port of Klaipeda, Lithuania. This novel innovation agenda is visible in several topics I examine in the study, that is, port governance, environmental issues, and seaport – port-city interface. The gathered primary source material on port policy documents, strategies, development planning documents and reports is analysed by utilizing the qualitative content analysis research method. Moreover, the empirical part of the case study, that is, tracing innovation practices in mundane port activities is based on collected qualitative semi-structured interviews with port authorities in Klaipeda and Stockholm, researchers and other port experts. I examine the interview material by employing the theoretical reading research method. In my analysis, I have reframed port-related policy development by tracing and identifying the port transformation from “functional terminals” to “engines for growth”. My results show that this novel innovation-oriented rhetoric imprinted in the narrative “engines for growth” is often contested in daily port practices. In other words, my analysis reveals that the port authorities’ and other port actors’ attitudes towards innovations do not necessarily correspond to the new narrative of innovation and do not always “fit” within a framework of neoliberal economic thinking that glorifies the “culture of innovations”. I argue that the ability to develop innovative initiatives in the ports of Klaipeda and Stockholm is strongly predetermined by local conditions, a port’s governance model, the way port actors perceive the importance of innovations per se, demand factors and new regulations.
Resumo:
As human action, drinking alcohol or smoking cigarettes, for instance, are phenomena that are familiar to most people. We recognise when people use drugs or gamble whether that happens in the television or around us. Sometimes we call these actions addictions. Addictive actions are actions that puzzle us. This puzzlement has raised different kinds of views on addiction that describe the phenomenon in different ways. The proponents of the views pick features that they consider to be sufficient in capturing the phenomenon. The disease view emphasises that addicted individuals are not in control over their own actions, whereas the choice view highlights addicted individuals’ capacity to act according to their own preferences. Some see addiction as a defect of will and addictive action is a manifestation of that. Sometimes they all insist on referring to the same group of people and describing the same actions with seemingly contradictory terms. What happens when an addicted individual acts in accordance with his addiction? This thesis also tries to answer this question and make this kind of action and agency understandable. By showing that these three common views fall short of capturing the phenomenon, I will provide characteristics that jointly suffice for something to be labelled addiction, but which are not, however, individually necessary (or sufficient) for addiction. Those characteristics are strong desire, myopia, biased decision-making, and weakness of will. Furthermore, they should be understood in the framework of diachronic, active agency. They contribute to a view on addictive action that consists of different kinds of actions. Acknowledging the variety of nuanced human action, the understanding of addictive action is increased and this may also be utilised in addiction-related policies and treatment. The emphasis of my study lies specifically on understanding addiction as action by the means of analytical philosophy.
Resumo:
Intelligence from a human source, that is falsely thought to be true, is potentially more harmful than a total lack of it. The veracity assessment of the gathered intelligence is one of the most important phases of the intelligence process. Lie detection and veracity assessment methods have been studied widely but a comprehensive analysis of these methods’ applicability is lacking. There are some problems related to the efficacy of lie detection and veracity assessment. According to a conventional belief an almighty lie detection method, that is almost 100% accurate and suitable for any social encounter, exists. However, scientific studies have shown that this is not the case, and popular approaches are often over simplified. The main research question of this study was: What is the applicability of veracity assessment methods, which are reliable and are based on scientific proof, in terms of the following criteria? o Accuracy, i.e. probability of detecting deception successfully o Ease of Use, i.e. easiness to apply the method correctly o Time Required to apply the method reliably o No Need for Special Equipment o Unobtrusiveness of the method In order to get an answer to the main research question, the following supporting research questions were answered first: What kinds of interviewing and interrogation techniques exist and how could they be used in the intelligence interview context, what kinds of lie detection and veracity assessment methods exist that are reliable and are based on scientific proof and what kind of uncertainty and other limitations are included in these methods? Two major databases, Google Scholar and Science Direct, were used to search and collect existing topic related studies and other papers. After the search phase, the understanding of the existing lie detection and veracity assessment methods was established through a meta-analysis. Multi Criteria Analysis utilizing Analytic Hierarchy Process was conducted to compare scientifically valid lie detection and veracity assessment methods in terms of the assessment criteria. In addition, a field study was arranged to get a firsthand experience of the applicability of different lie detection and veracity assessment methods. The Studied Features of Discourse and the Studied Features of Nonverbal Communication gained the highest ranking in overall applicability. They were assessed to be the easiest and fastest to apply, and to have required temporal and contextual sensitivity. The Plausibility and Inner Logic of the Statement, the Method for Assessing the Credibility of Evidence and the Criteria Based Content Analysis were also found to be useful, but with some limitations. The Discourse Analysis and the Polygraph were assessed to be the least applicable. Results from the field study support these findings. However, it was also discovered that the most applicable methods are not entirely troublefree either. In addition, this study highlighted that three channels of information, Content, Discourse and Nonverbal Communication, can be subjected to veracity assessment methods that are scientifically defensible. There is at least one reliable and applicable veracity assessment method for each of the three channels. All of the methods require disciplined application and a scientific working approach. There are no quick gains if high accuracy and reliability is desired. Since most of the current lie detection studies are concentrated around a scenario, where roughly half of the assessed people are totally truthful and the other half are liars who present a well prepared cover story, it is proposed that in future studies lie detection and veracity assessment methods are tested against partially truthful human sources. This kind of test setup would highlight new challenges and opportunities for the use of existing and widely studied lie detection methods, as well as for the modern ones that are still under development.
Resumo:
The need behind this thesis was in the development of a more modern earning logic for a pelvic floor muscle home training device to which a portal solution is going to be introduced as a part of new upgraded version of the device. The goal is to offer useful guidelines and recommendations for the medical device manufacturer to use in the process of creating the new business model around the new product version. In the theoretical part of this thesis, the used theoretical frameworks for business model generation and pricing models are presented. The special characteristics of healthcare technology industry are also introduced as initial data for the empirical part. The empirical data is collected via interviews and meetings from both inside and outside of the company to gain a comprehensive picture of the issue at hand. The needed changes in the business model as well as possible pricing options are gone through in the empirical chapters with the main focus being on the incoming revenue streams and pricing. As results of the thesis recommendations are presented for the changes that are needed in the business model after the introduction of the portal solution. The results of this thesis can be used for finishing the development process of the new version of the device and especially the earning logic of it.