The Detector Control Systems for the CMS Resistive Plate Chamber at LHC

The RPC Detector Control System (RCS) is the main subject of this PhD work. The project, involving the Lappeenranta University of Technology, the Warsaw University and INFN of Naples, is aimed to integrate the different subsystems for the RPC detector and its trigger chain in order to develop a common framework to control and monitoring the different parts. In this project, I have been strongly involved during the last three years on the hardware and software development, construction and commissioning as main responsible and coordinator. The CMS Resistive Plate Chambers (RPC) system consists of 912 double-gap chambers at its start-up in middle of 2008. A continuous control and monitoring of the detector, the trigger and all the ancillary sub-systems (high voltages, low voltages, environmental, gas, and cooling), is required to achieve the operational stability and reliability of a so large and complex detector and trigger system. Role of the RPC Detector Control System is to monitor the detector conditions and performance, control and monitor all subsystems related to RPC and their electronics and store all the information in a dedicated database, called Condition DB. Therefore the RPC DCS system has to assure the safe and correct operation of the sub-detectors during all CMS life time (more than 10 year), detect abnormal and harmful situations and take protective and automatic actions to minimize consequential damages. The analysis of the requirements and project challenges, the architecture design and its development as well as the calibration and commissioning phases represent themain tasks of the work developed for this PhD thesis. Different technologies, middleware and solutions has been studied and adopted in the design and development of the different components and a big challenging consisted in the integration of these different parts each other and in the general CMS control system and data acquisition framework. Therefore, the RCS installation and commissioning phase as well as its performance and the first results, obtained during the last three years CMS cosmic runs, will be

Tuotehallinnan tietoprosessin haasteet ja kehittäminen ohjelmistoyrityksessä

Diplomityössä tutustuttiin ohjelmistoyrityksen tuotteiden asiakastarpeiden ja vaatimusten käsittelyyn tuotehallinnan tietoprosessin näkökulmasta. Työssä kuvattiin yrityksen nykyinen prosessi sekä analysoitiin erityisesti sen haasteita. Teoriatiedon sekä yrityksen asiantuntijalausuntojen pohjalta laadittiin tuotehallinnan tietoprosessin kehitysehdotuksia. Kvalitatiivinen tapaustutkimus toteutettiin käytännönläheisesti esittämällä kohdeyrityksen asiantuntijoille avoimia kysymyksiä sekä heidän kanssaan keskustellen. Tutkimus tehtiin neljässä vaiheessa ja sen päätavoitteena oli selvittää, millä keinoilla voidaan tukea kohdeyrityksen tuotekehitystarpeisiin ja tuotekehitysehdotuksiin liittyvän tiedon hallintaa sekä tuotantopäätöksiä. Tutkimuksen teoreettinen viitekehys koostui organisaation tietoprosessista, organisaation päätöksentekoprosessista, ohjelmistotuotteen erityispiirteistä sekä ohjelmiston tuotehallinnasta. Kohdeyrityksen tuotehallinnan tietoprosessin kehittämisen keskeisiksi tekijöiksi nousivat tuotehallinnan tukena käytettävän tietojärjestelmän ominaisuudet, tiedon hakeminen, tiedon löytäminen ja tulkinta. Kehityskohteiksi nousivat lisäksi prosessin kulku, perustuotekehityksen ja asiakastoimituksien rinnakkainen hallinta sekä asiakasarvon tuottaminen tuotehallinnan keinoin. Tutkimuksen lopputuloksena toteutettiin kohdeyrityksen tuotehallinnan tietoprosessin tavoitetilan kuvaus. Tavoitetilan elementtejä olivat tuotteiden pidemmän tähtäimen suunnitelmat (roadmap), tuotehallinnan organisointi tiimeille sekä sensemaking-prosessin hyödyntäminen osapuolien yhteisen ymmärryksen luomiseksi kehitystarpeille. Käytössä olevan tietojärjestelmän kehitysehdotukset perustuivat näiden tuotehallinnan elementtien tukemiseen.

Sähköverkkojen käytöntuki- ja käytönvalvontajärjestelmien käyttöönotto

Käytöntuki- ja käytönvalvontajärjestelmät, eli käytönhallintajärjestelmät ovat osana sähköverkkoyhtiöiden arkea ja ilman niiden tuomaa apua sähkön jakelun valvonta ja hallinta olisi hyvin haastava tehtävä. Lisäksi käytönhallintajärjestelmät moitteeton toi-miminen tarjoaa hyvän alustan kehittää tulevaisuuden tärkeitä hankkeita kuten Smart Grid konseptia. Tässä työssä tarkastellaan käytönhallintajärjestelmien käyttöönottoa, kuinka se voidaan toteuttaa ja mitä asioita pitää ottaa huomioon käyttöönoton eri vaiheissa. Käytönhallintajärjestelmien käyttöönotto suoritettiin Lappeenrannan teknillisen yliopiston sähkömarkkinalaboratoriossa sijaitsevalla verkkosimulaattorille, johon asennettiin MicroSCADA SYS 600 9.1 käytönvalvontajärjestelmä sekä DMS 600 4.2 käytöntukijärjestelmä.

Reaktorisydämen valvontajärjestelmän modernisointi Olkiluodon kiehutusvesilaitoksella

Reaktorisydämen valvonnalla varmistetaan, että polttoaineelta vaaditut termiset marginaalit toteutuvat ja polttoaineen suojakuori säilyy ehjänä. Olkiluodon kiehutusvesilaitoksen nykyinen sydämen valvontajärjestelmä koostuu SIMULATE-3-sydänsimulaattoriohjelmasta, reaktorisydämen instrumentoinnista, termisen tehon laskentaohjelmasta, tiedonkeruuohjelmista ja käynnistysautomatiikasta. Uusi järjestelmä koostuu näiden lisäksi GARDEL-ohjelmasta, joka on kehitetty kevytvesireaktoreiden sydämen käytön suunnitteluun ja valvontaan. GARDEL käyttää laskentaan samoja ohjelmia, jotka ovat jo Olkiluodon kiehutusvesilaitoksella käytössä. Tämän työn tarkoituksena oli verrata nykyistä ja uutta sydämen valvontajärjestelmää Olkiluodon kiehutusvesilaitoksella. Työssä tutkittiin LPRM-detektorien kalibroinnin jälkeisen datan käsittelyä, palamapäivitystä, stabiilisuuslaskentaa ja adaptiivisia menetelmiä. Järjestelmien vertailuun käytettiin Olkiluoto 2 -laitosyksiköltä käyttöjaksolta 31 (2011–2012) saatuja laskentuloksia. Tulosten perusteella havaittiin uuden järjestelmän laskennassa yksittäisiä virheitä, jotka tulee korjata. Lisäksi uuden järjestelmän toiminnasta tarvitaan lisäselvitystä.

Investointilaskelmien merkitys pienissä ja keskisuurissa yrityksissä -tapaustutkimus

Tutkimuksen tavoitteena oli selvittää, mikä merkitys investointilaskelmilla on kohdeyrityksen investointipäätöksen teossa ja miten epävarmuus investointilaskelmissa voidaan ottaa huomioon. Tutkimus perustuu kvalitatiivisiin eli laadullisiin tutkimusmenetelmiin. Tutkimuksen teoreettinen viitekehys käsittelee investointilaskelmien tuottamaa informaatiota ja millä perusteella yritykset valitsevat investointilaskentamenetelmän yritykseen. Empiirisen osuuden tiedonhankinnassa hyödynnettiin tapaustutkimusta. Tutkimus osoitti, että kohdeyrityksessä koetaan tärkeäksi analysoida investointihankkeita eri arviointimenetelmillä. Yrityksellä on halu kehittää investointilaskentaa perinteisen takaisinmaksuajan menetelmän rinnalle. Myös herkkyysanalyysin merkitys nousi esille.

Tiedonkeruujärjestelmän kehittäminen voimalaitoksen toiminnan tehostamisessa

Diplomityössä kehitetään tiedonkeruujärjestelmää voimalaitoksen toiminnan tehostamiseksi. Aihetta käsitellään tiedonkeruujärjestelmän käyttäjän ja ylläpitäjän näkökulmasta. Tiedonkeruujärjestelmällä kerätään prosessitietoa automaatiojärjestelmästä ja tallennetaan prosessitieto tietokantaan. Työssä on kuvattu sekä automaatio- että tiedonkeruujärjestelmää prosessitiedon keruun, tallentamisen ja hallinnan ymmärtämiseksi. Prosessitiedon merkitystä voimalaitoksen toiminnan kannalta on myös pohdittu. Diplomityö tehtiin Mertaniemen voimalaitoksella, jossa käytännön kehityskohteina olivat laskenta- ja raportointisovellukset. Lisäksi tarkistettiin tietokantamuuttujia. Tiedonkeruujärjestelmää kehitetään ja päivitetään voimalaitoksen laitteisto- ja toimintamuutosten takia. Kehityksellä pyritään tarjoamaan oikeampaa ja luotettavampaa tietoa, korjaamaan virheitä sekä kartoittamaan mahdollisia puutteita.

Prosessiautomaatio pinnankorkeusmittauksen koelaitteistoissa

Pinnankorkeuden tunteminen kiehutusvesireaktorin painesäiliössä on erittäin tärkeää sen turvallisuusvaikutusten takia. Pinnankorkeutta mitataan vesipatsaiden korkeutta havaitsevien paine-eromittausten avulla. Säteilyturvakeskuksen YVL-ohjeiden mukaan turvallisuuteen vaikuttavien mittausten täytyy noudattaa moninkertaistus- ja erilaisuusperiaatteita. Yleensä erilaisuusperiaatetta on toteutettu käyttämällä erityyppisiä paine-eromittareita, mutta erilaisella fysikaalisella toimintaperiaatteella oleva mittaus olisi parempi ja toteuttaisi paremmin erilaisuusperiaatetta. Uimurikytkin olisi tällainen fysikaalisesti eri periaatteeseen perustuva pinnankorkeuden mittauslaite. Ydinvoimalaan tarkoitettu teknologia tulee kelpoistaa riippumattoman tahon toimesta ennen käyttöönottoa. Kelpoistamiskokeita varten Lappeenrannan teknillisen yliopiston Ydinturvallisuuden tutkimusyksikköön rakennettiin vuosina 2011–2013 kaksi koelaitteistoa. Näillä koelaitteistoilla tutkittiin uimurikytkimien toimintaa ja ominaisuuksia erilaisissa kiehutusvesireaktorin käyttötilanteissa. Koelaitteistot tarvitsivat toimiakseen automaatiojärjestelmät, jotka suunniteltiin pääosin noudattamalla suunnittelun elinkaarimallia sekä automaatiosuunnittelun sisältökokonaisuuksia. Automaatiojärjestelmien suunnittelu aloitettiin määrittelemällä koejärjestelyjen asettamat vaatimukset, jonka jälkeen tehtiin teknologiavalinnat. Seuraavaksi suunniteltiin automaatiojärjestelmien logiikkaohjelmistot, joiden kuvaukseen tämä työ pääasiassa keskittyy. Logiikkaohjelmistot toteutettiin graafisella National Instruments LabView -ohjelmointikielellä. Logiikkaohjelmistojen tuli hoitaa tiedonkeruuta, käyttöautomaatiota, turvallisuustehtäviä sekä kokeisiin liittyviä erikoistehtäviä. Ohjelmistot saatiin esikokeiden aikana toimimaan halutusti, ja varsinaiset kokeet voitiin suorittaa ilman merkittäviä ongelmia.

Critical infrastructure protection against cyber threats

A postgraduate seminar series with a title Critical Infrastructure Protection against Cyber Threats held at the Department of Military Technology of the National Defence University in the fall of 2013 and 2014. This book is a collection of some of talks that were presented in the seminar. The papers address origin of critical infrastructure protection, wargaming cyberwar in critical infrastructure defence, cyber-target categorization, supervisory control and data acquisition systems vulnerabilities, electric power as critical infrastructure, improving situational awareness of critical infrastructure and trust based situation awareness in high security cloud environment. This set of papers tries to give some insight to current issues of the network-centric critical infrastructure protection. The seminar has always made a publication of the papers but this has been an internal publication of the Finnish Defence Forces and has not hindered publication of the papers in international conferences. Publication of these papers in peer reviewed conferences has indeed been always the goal of the seminar, since it teaches writing conference level papers. We still hope that an internal publication in the department series is useful to the Finnish Defence Forces by offering an easy access to these papers.

Bioimage informatics in STED super-resolution microscopy

Optical microscopy is living its renaissance. The diffraction limit, although still physically true, plays a minor role in the achievable resolution in far-field fluorescence microscopy. Super-resolution techniques enable fluorescence microscopy at nearly molecular resolution. Modern (super-resolution) microscopy methods rely strongly on software. Software tools are needed all the way from data acquisition, data storage, image reconstruction, restoration and alignment, to quantitative image analysis and image visualization. These tools play a key role in all aspects of microscopy today – and their importance in the coming years is certainly going to increase, when microscopy little-by-little transitions from single cells into more complex and even living model systems. In this thesis, a series of bioimage informatics software tools are introduced for STED super-resolution microscopy. Tomographic reconstruction software, coupled with a novel image acquisition method STED< is shown to enable axial (3D) super-resolution imaging in a standard 2D-STED microscope. Software tools are introduced for STED super-resolution correlative imaging with transmission electron microscopes or atomic force microscopes. A novel method for automatically ranking image quality within microscope image datasets is introduced, and it is utilized to for example select the best images in a STED microscope image dataset.

Detection of Epilepsy with a Commercial EEG Headband

Epilepsy is a chronic brain disorder, characterized by reoccurring seizures. Automatic sei-zure detector, incorporated into a mobile closed-loop system, can improve the quality of life for the people with epilepsy. Commercial EEG headbands, such as Emotiv Epoc, have a potential to be used as the data acquisition devices for such a system. In order to estimate that potential, epileptic EEG signals from the commercial devices were emulated in this work based on the EEG data from a clinical dataset. The emulated characteristics include the referencing scheme, the set of electrodes used, the sampling rate, the sample resolution and the noise level. Performance of the existing algorithm for detection of epileptic seizures, developed in the context of clinical data, has been evaluated on the emulated commercial data. The results show, that after the transformation of the data towards the characteristics of Emotiv Epoc, the detection capabilities of the algorithm are mostly preserved. The ranges of acceptable changes in the signal parameters are also estimated.

External knowledge transfer mechanisms in service business acquisition

In knowledge-intensive economy an effective knowledge transfer is a part of the firm’s strategy to achieve a competitive advantage in the market. Knowledge transfer related to a variety of mechanisms depends on the nature of knowledge and context. The topic is, however, very little empirical studied and there is a research gap in scientific literature. This study examined and analyzed external knowledge transfer mechanisms in service business and especially in the context of acquisitions. The aim was to find out what kind of mechanisms was used when the buyer began to transfer data e.g. their own agendas and practices to the purchased units. Another major research goal was to identify the critical factors which contributed to knowledge transfer through different mechanisms. The study was conducted as a multiple-case study in a consultative service business company, in its four business units acquired by acquisition, in various parts of the country. The empirical part of the study was carried out as focus group interviews in each unit, and the data were analyzed using qualitative methods. The main findings of this study were firstly the nine different knowledge transfer mechanisms in service business acquisition: acquisition management team as an initiator, unit manager as a translator, formal training, self-directed learning, rooming-in, IT systems implementation, customer relationship management, codified database and ecommunication. The used mechanisms brought up several aspects as giving the face to changing, security of receiving right knowledge and correctly interpreted we-ness atmosphere, and orientation to use more consultative touch with customers. The study pointed out seven critical factors contributed to different mechanisms: absorption, motivation, organizational learning, social interaction, trust, interpretation and time resource. The two last mentioned were new findings compared to previous studies. Each of the mechanisms and the related critical factors contributed in different ways to the activity in different units after the acquisition. The role of knowledge management strategy was the most significant managerial contribution of the study. Phenomenon is not recognized enough although it is strongly linked in knowledge based companies. The recognition would help to develop a better understanding of the business through acquisitions, especially in situations such as where two different knowledge strategies combines in new common company.

Local Embeddedness and Knowledge Acquisition and How They Affect Finnish Business Operations in Russia

This pilot project aims examine the factors of the Finnish subsidiaries local embeddedness, their knowledge creation capabilities and the transfer mechanisms of new practices in the context of the Russian market. The research is designed as a multiple case study conducted with a qualitative approach. The empirical data consists of the interviews of the four Finnish case companies operating in the Kaluga region and three local partner companies. The deductive and inductive approaches were employed to conduct the analysis of the data. The propositions for the future study were developed in the conclusive chapters of the research, where we propose that the factor of the economy growth and industrialization matters in terms of subsidiaries’ role dedication, their knowledge creation capabilities, and direction of the knowledge flow within the local environment.

Integrating the export distribution channels after an acquisition

This thesis is based on studying integration synergies in a merger or acquisition situation with the interest in distribution channel integration. M&As seem to be forever popular and nowadays companies often use them as a certain kind of strategy to develop their business. M&As have attracted research for decades and also distribution in M&As has been found interesting. Moreover, research often concentrates to the horizontal M&A´s potential synergies that emerge in the integration process and so is the case also in this study as the core issue is to study the integration of the distribution channels and its potential synergies. This study concentrates on a single case, an acquisition which took place in 2011. The case consists of two Finnish companies operating in the same business field. Both of the companies are very export orientated, which gives this study its export view. As the companies operate in the same field this acquisition falls into the categorization of horizontal acquisition. The objective of the thesis is to study how the export channels could be integrated after an acquisition? This research question is divided again to three sub-questions asking how the distribution channels of the acquirer and acquired company are organized, what is pursued by the post-acquisition distribution channel integration and what are the integration challenges especially from the logistics point-of-view. The framework was built from the basis of the literature used in this thesis. The framework combines M&A process and distribution channels to a one united model which presents the progress of this thesis. The study was carried out as a qualitative research and as a holistic single case study. The data used in the research includes two interviews, other material from the case companies and also material of the companies collected by the author independently from different sources. There were many motives for the acquisition as usual. From the research results one can find that the integration process is still very ongoing and the synergies have not yet been fully discovered but also they are there to be found. The concentration of the research was in the export distribution which proved to be meaningful since the exports markets of the case companies were found to be quite complementary. The research results brought up also other issues concerning the post-acquisition integration process rather than the distribution channels and export. M&As are always a risky business. The final result can never be predicted. No matter how good the merging companies look on paper the practice is not the same. The acquisition process of this case has not ended yet and there lies potential synergy benefits to be discovered if enough effort is used to go through the process right.

Acquisition Failure: The case of a multinational enterprise from an emerging market failing in Indonesia.

The escalation in the number of mergers and acquisition transactions involving emerging market firms is a relatively recent phenomenon; as a consequence academic research in such topic is rather limited. The purpose of this research study was to discuss the possible reasons that led the acquisition failure of an emerging multinational firm and an Indonesian player. Extensive theoretical research was performed and it had been achieved, based on this, the finding of a framework that facilitated to understand the way in which the concepts of cultural distances and relate liabilities of foreignness in the process of acquisitions of foreign companies in emerging markets. The theoretical background collects literature related to acquisitions, models of cultural studies between nations and liabilities of foreignness. It has been generated a variety of frameworks that aid to understand the way that the institutional distance and cultural factors together with the concept of liabilities of foreignness can affect the process of market entry of an emerging multinational company to the extent that the best way to stop losing money is to abandon the project. The empirical research consisted of selective semi-structured interviews and an extensive research in available public data on the chosen study case of this research. There were several factors that were identified as the cause of the failure in the market entry of a Mexican multinational firm in Indonesia. The weakness shown by the local government authorities was used by the local community leaders who rioted because of discomfort. These groups were the ones who made the government submit to the extent that the agreements reached at the beginning of the deal were either canceled or modified in a way that favored always the local community. The contributions of this study fall into the knowledge field of emerging multinational firms and market entry process.

Managing the change of organizational culture in cross-border mergers and acquisitions: The role of post-acquisition integration in organizational culture change

Over the years, cross-border mergers and acquisitions have become a popular strategic option for variety of firms. Companies often seek rapid growth through acquiring potentially valuable enterprises or attempting to enhance their organization’s profitability by merging with other firms. However, managing the change of organizational culture is a major managerial challenge as companies often confront difficulties when merging two previously autonomous organizational cultures into one, joint organizational culture. Therefore, the purpose of this study is to increase understanding related to the challenges and possibilities concerning the management of organizational culture change in cross-border mergers and acquisitions. The research question “How to manage the change of organizational culture in cross-border mergers and acquisitions?” is analysed in relation to the theories presented in this thesis regarding organizational culture, organizational change and acculturation as well as in relation with the collected empirical data. The research question is divided into three sub-questions according to the following: (1) “What is the role of organizational culture in organizations?”, (2) “How to manage organizational change in mergers and acquisitions?” and (3) “How to manage organizational culture change through acculturation?”. The thesis is conducted as a qualitative case study research including three personal interviews and one group interview. The interviews were conducted as a combination of semi-structured and unstructured interviews. Theories related to organizational culture, the management of change as well as acculturation are studied and further analysed in relation to empirical material collected by the researcher. Research findings indicate that that several factors can influence the success of managing the organizational culture change in cross-border mergers and acquisitions. Factors such as defining the preferred acculturation model prior the merger; managing the resistance of change; open communication; acknowledgement of local culture and cultural differences; involvement of personnel in change processes; as well as the formulation and implementation of comprehensive change plans proved to be important factors with relation to successful management of organizational culture change