Hallinnollinen sanktiointi

Tausta Suomessa lainsäätäjä reagoi helposti yhteiskunnalliseen häiriötekijään rikosoikeuden keinoin. Tästä on osoituksena se, että syksyllä 2010 varsinaisen rikoslain lisäksi rikoksesta oli säädetty 256 eri laissa. Suomalainen, lähtökohdiltaan maltillinen kontrolli- ja kriminaalipolitiikka on 1970-luvulla linjatun vastaisesti johtanut 2000-luvulle tultaessa rikosoikeudellisen kontrollin lisääntymiseen ja jopa kiristymiseen. Raja rikosten ja rikkomusten välillä on liudentunut ja paikoitellen kadonnut ja erityisesti turvallisuudesta on kehittynyt – käsitteeseen liittyvistä oikeudellisista jännitteistä huolimatta – keskeinen rikosoikeudellisen sääntelyn oikeutusperuste. Rikosoikeuden käyttäminen vähäisten rikosten kontrollointiin on aiheuttanut Suomeen viivästymisen ongelman. Yleisessä tiedossa on se, että Euroopan ihmisoikeustuomioistuin on antanut 2000-luvulla Suomelle kymmeniä tuomioita siksi, että rikosjuttuja on käsitelty viranomaisissa ja tuomioistuimissa liian kauan. Vähemmän on sen sijaan keskusteltu siitä, että myös vähäiset rikokset viivästyvät rikosoikeuden alan laajetessa ja viranomaisten voimavarojen ehtyessä. Suomessa ongelmaa on pyritty hoitamaan rikosoikeudellista toimivaltaa hallintoviranomaisille delegoimalla tilanteen ollessa nyt se, että uuden sakkomenettelylain voimaan tullessa noin 90 % rikosoikeudellisesta kompetenssista on poliisilla ja muilla hallintoviranomaisilla. Se taasen on ongelmallista perustuslain 3 §:ssä säädetyn vallanjakoperiaatteen kannalta. Välttämätöntä on korostaa myös sitä, että pääosin rikosoikeudelliseen kontrolliin perustuva systeemi aiheuttaa rikosoikeuden inflaatiota: rikosoikeuden arvostuksen vähenemisestä aiheutuvia ei-mittavissa olevia kuluja. Rikosoikeuden laajenemista vastaan esitetään kuitenkin harvoin kritiikkiä. Rikosoikeustieteen piirissäkään sille ei ole esitetty vakavasti otettavaa vaihtoehtoa. Esimerkiksi hallinnollisia sanktioita ei ole Suomessa – ei tosin muissa Pohjoismaissakaan – koettu rikosoikeuden vaihtoehtona, vaan usein rikosoikeutta täydentävänä järjestelmänä. Hallinnollisten sanktioiden käyttäminen rikosoikeuden ohessa ei ole ollut yksiselitteistä ja jäsenneltyä, yleisiin oppeihin perustuvaa. Kontrollin erityisille alueille, esimerkiksi sotilaskontrolliin, on lisäksi kehittynyt rikos- ja hallinto-oikeuden sekajärjestelmiä. Tutkimuskysymykset Käsillä olevassa artikkelimuotoisessa väitöskirjatutkimuksessa pyritään hahmottelemaan rikos- ja hallinto-oikeudellisten rangaistusjärjestelmien välisiä eroavaisuuksia Suomessa. Tutkimuksen keskeisin tehtävä on sen pohtiminen, millä tavalla 2010-luvulle tultaessa olisi tutkimuksen empiiriset ja teoreettiset lähtökohdat huomioon ottaen järkevää ja tarkoituksenmukaista rangaista. Tällä perusteella kehitetään yksikertaista hallintosanktiointiteoreettista mallia, että sitä hyväksikäyttäen lainvalmisteluprosessin sanktiointitilanteessa, sanktiosta päätettäessä, olisi mahdollista asettaa oikeusturvan vähimmäistakeet täyttävällä tavalla oikeus- ja muilta vaikutuksiltaan rationaalinen seuraamus sekä säätää sen määräämiseksi yhteiskunnallisilta vaikutuksiltaan tehokas ja riittävän oikeusturvallinen menettely. Tutkimustehtävä on tiivistetysti 1) hallinnollisten sanktioiden ja rikosoikeudellisten rangaistusten ja niiden alan määrittäminen, 2) hallinnollisten sanktioiden sääntelymallien valintaperusteluiden selvittäminen, 3) hallintosanktioteoreettisen mallin kehittäminen lainvalmisteluprosessia varten sekä 4) de lege ferenda -suositusten tekeminen rangaistavuuden hyväksyttävyyden ja joutuisuuden parantamiseksi. Menetelmä ja aineistot Tutkimus kytkeytyy teoreettisen rikosoikeustieteen, hallinto-oikeustieteen ja prosessioikeustieteen alalle ja se on luonteeltaan ongelmakeskeinen. Tieteenalojen väliset painotukset ja niiden vaikutus vaihtelevat tutkimuksessa. Vaikka tutkimus on monella tavalla luonteeltaan teoreettinen, siinä rakennetaan nimenomaan lainsäädäntötyötä ja lainvalmistelua tukevaa tutkimusta ja teoriaa. Tältä osin näkökulma liittyy kriminalisointiteoreettisessa tutkimuksessa hahmotettuun lainsäätäjän oikeuslähdeoppia koskevaan uuteen näkökulmaan, jolla on yhteyksiä lainsäädäntötutkimukseen ja oikeusteoriassa hahmotettuun legisprudence-tutkimusuuntaukseen, näkökulman suuntautuessa lainsäädäntötasolle. Tutkimuksen lähteistä suurin osa on oikeustieteellistä kirjallisuutta, jonka pääosa muotoutuu suomalaisesta oikeustieteellisestä kirjallisuudesta. Myös pohjoismaalaista, saksalaista ja hieman myös anglosaksista kirjallisuutta on käytetty. Kansainvälisten kirjallisuuslähteiden merkitys ei ole ollut merkittävä, koska kattava eurooppalainen näkemys aihepiiristä on pyritty saamaan Euroopan ihmisoikeustuomioistuimen ratkaisukäytäntöä hyödyntäen. Tutkimuksen lähteinä on käytetty laajasti myös kansallista lainvalmisteluaineistoa, erityisesti hallituksen esityksiä ja perustuslakivaliokunnan lausuntokäytäntöä. Johtopäätökset Kriminaali- ja/tai kontrollipolitiikassa on juuri nyt tärkeää pohtia, millä tavalla 2010-luvulle tultaessa on järkevää ja tarkoituksenmukaista rangaista. Tähän voisi olla mahdollista vastata tutkimuksessa kehitettävällä hallintosanktiointiteoreettisella mallilla. Mallin kehittäminen on edellyttänyt yhteiskunnallisten sanktiokäytäntöjen oikeusvaltioopillista tarkastelua, jolloin sanktioiden yhteiskunnalliseen merkitykseen pureutuminen kuvailee myös sitä, millainen modernin oikeusvaltion tila tällä hetkellä on. Perinteisten oikeusvaltioiden paradigmojen käyttäminen ei välttämättä edistä relevantin oikeusvaltiollisen sanktiointiteoreettisen mallin kehittämistä. Voi olla niinkin, että klassinen oikeusvaltio-oppi ja oletetunlaiset rikosoikeuden erityiset elementit eivät enää vastaa yhteiskuntatodellisuutta. Näin rankaisemisen yleiset opit voivat nousta kehittämisen kohteeksi oikeusvaltiollisuuden elementtien toteuttamiseksi valtavasta kasvaneessa hallintoyhteiskunnassa – hallinto-johtoisessa yhteiskunnallisessa todellisuudessa. Suomen rikoslaki sisältää laajassa merkityksessä sadoittain erilaatuisia kriminalisointeja, joiden merkitys on usein hallinnon toimintaa subventoiva, symbolinen tai jonkin toisen kriminalisoinnin vaikutusta tehostamaan pyrkivä. Tällainen rikoslaki on tehtävänsä, vaikuttavuutensa ja hyväksyttävyytensä kannalta ongelmallinen. Suomalainen hallinnollisten sanktioiden järjestelmä ei sekään ole järkevä ja tarkoituksenmukainen, yleisiin oppeihin perustuva systeemi. Myös yleiseurooppalainen kehitys näyttäisi viittaavan siihen, että Suomessa on tarve kehittää sekä rikosoikeutta että sille vaihtoehtoista hallintosanktioiden järjestelmää, sanktio-oikeutta. Tämä edellyttää lainsäädäntöuudistuksia.

Waste Stream Investigation from Perspective of Changing Waste Legislation at Green Sand Foundries

The update of the Finnish legislation concerning waste was unavoidable, to comply with the European Union (EU) requirements defined in the EU-Directive on Waste. The new waste law updates were enacted into the Finnish legislation on the 11.03.2011 and targeted for applicability by the 11.03.2012. This thesis investigates the implications of the new amendments to the waste legislation from the perspective of green sand foundries. The investigations are conducted by comparing two of Componenta’s green sand foundries and evaluating their waste streams. Additionally, the impacts of legislation amendments are critiqued on their environmental and economic aspects. The study’s comparison of waste fractions at the two foundries reveals that sand is dominant in absolute tonnage and costs. The increments of waste taxes forces foundries to focus on waste management, recycling and disposing. The new legislation’s promotion of material efficiency, also guides foundries towards the prevention of waste. A potential preventive measure is to regenerate waste sand resulting to cost savings on both raw-materials and waste management. However, the lack of absolute targets for waste prevention or recycling rates discourages the interests towards creating or adopting new technologies and methods for the waste handling.

Simulation of Solid Processes by Aspen Plus

Solid processes are used for obtaining the valuable minerals. Due to their worth, it is obligatory to perform different experiments to determine the different values of these minerals. With the passage of time, it is becoming more difficult to carry out these experiments for each mineral for different characteristics due to high labor costs and consumption of time. Therefore, scientists and engineers have tried to overcome this issue. They made different software to handle this problem. Aspen is one of those software for the calculation of different parameters. Therefore, the aim of this report was to do simulation for solid processes to observe different effect for minerals. Different solid processes like crushing, screening; filtration and crystallization were simulated by Aspen Plus. The simulation results are obtained by using this simulation software and they are described in this thesis. It was noticed that the results were acceptable for all solid processes. Therefore, this software can be used for the designing of crushers by calculating the power consumption of crushers, can design the filter and for the calculation of material balance for all processes.

Modeling of residual stresses and distortion due to welding in fillet welds

Welding has a growing role in modern world manufacturing. Welding joints are extensively used from pipes to aerospace industries. Prediction of welding residual stresses and distortions is necessary for accurate evaluation of fillet welds in relation to design and safety conditions. Residual stresses may be beneficial or detrimental, depending whether they are tensile or compressive and the loading. They directly affect the fatigue life of the weld by impacting crack growth rate. Beside theoretical background of residual stresses this study calculates residual stresses and deformations due to localized heating by welding process and subsequent rapid cooling in fillet welds. Validated methods are required for this purpose due to complexity of process, localized heating, temperature dependence of material properties and heat source. In this research both empirical and simulation methods were used for the analysis of welded joints. Finite element simulation has become a popular tool of prediction of welding residual stresses and distortion. Three different cases with and without preload have been modeled during this study. Thermal heat load set is used by calculating heat flux from the given heat input energy. First the linear and then nonlinear material behavior model is modeled for calculation of residual stresses. Experimental work is done to calculate the stresses empirically. The results from both the methods are compared to check their reliability. Residual stresses can have a significant effect on fatigue performance of the welded joints made of high strength steel. Both initial residual stress state and subsequent residual stress relaxation need to be considered for accurate description of fatigue behavior. Tensile residual stresses are detrimental and will reduce the fatigue life and compressive residual stresses will increase it. The residual stresses follow the yield strength of base or filler material and the components made of high strength steel are typically thin, where the role of distortion is emphasizing.

Design and implementation of a production synchronization extension for Microsoft Dynamics AX

In a just-in-time, assemble-to-order production environments the scheduling of material requirements and production tasks - even though difficult - is of paramount importance. Different enterprise resource planning solutions with master scheduling functionality have been created to ease this problem and work as expected unless there is a problem in the material flow. This case-based candidate’s thesis introduces a tool for Microsoft Dynamics AX multisite environment, that can be used by site managers and production coordinators to get an overview of the current open sales order base and prioritize production in the event of material shortouts to avoid part-deliveries.

Treatment of Fe-containing Acid Mine Waters in Fixed Bed Adsorption Column with Calcite Side-Stone

The acid mining drainage is considered the most significant environmental pollution problem around the world for the extensive formation acidic leachates containing heavy metals. Adsorption is widely used methods in water treatment due to it easy operation and the availability of a wide variety of commercial adsorbent (low cost). The primary goal of this thesis was to investigate the efficiency of neutralizing agents, CaCO3 and CaSiO3, and metal adsorption materials with unmodified limestone from Company Nordkalk Oy. In addition to this, the side materials of limestone mining were tested for iron adsorption from acidic model solution. This study was executed at Lappeenranta University of Technology, Finland. The work utilised fixed-bed adsorption column as the main equipment and large fluidized column. Atomic absorption spectroscopy (AAS) and x-ray diffraction (XRD) was used to determine ferric removal and the composition of material respectively. The results suggest a high potential for the studied materials to be used a low cost adsorbents in acid mine drainage treatment. From the two studied adsorbents, the FS material was more suitable than the Gotland material. Based on the findings, it is recommended that further studies might include detailed analysis of Gotland materials.

Designing sustainable industrial ecosystems : the case of a biogas-for-traffic solution

This thesis focuses on the development of sustainable industrial architectures for bioenergy based on the metaphors of industrial symbiosis and industrial ecosystems, which imply exchange of material and energy side-flows of various industries in order to improve sustainability of those industries on a system level. The studies on industrial symbiosis have been criticised for staying at the level of incremental changes by striving for cycling waste and by-flows of the industries ‘as is’ and leaving the underlying industry structures intact. Moreover, there has been articulated the need for interdisciplinary research on industrial ecosystems as well as the need to extend the management and business perspectives on industrial ecology. This thesis addresses this call by applying a business ecosystem and business model perspective on industrial symbiosis in order to produce knowledge on how industrial ecosystems can be developed that are sustainable environmentally and economically. A case of biogas business is explored and described in four research papers and an extended summary that form this thesis. Since the aim of the research was to produce a normative model for developing sustainable industrial ecosystems, the methodology applied in this research can be characterised as constructive and collaborative. A constructive research mode was required in order to expand the historical knowledge on industrial symbiosis development and business ecosystem development into the knowledge of what should be done, which is crucial for sustainability and the social change it requires. A collaborative research mode was employed through participating in a series of projects devoted to the development of a biogas-for-traffic industrial ecosystem. The results of the study showed that the development of material flow interconnections within industrial symbiosis is inseparable from larger business ecosystem restructuring. This included a shift in the logic of the biogas and traffic fuel industry and a subsequent development of a business ecosystem that would entail the principles of industrial symbiosis and localised energy production and consumption. Since a company perspective has been taken in this thesis, the role of an ecosystem integrator appeared as a crucial means to achieve the required industry restructuring. This, in turn, required the development of a modular and boundary-spanning business model that had a strong focus on establishing collaboration among ecosystem stakeholders and development of multiple local industrial ecosystems as part of business growth. As a result, the designed business model of the ecosystem integrator acquired the necessary flexibility in order to adjust to local conditions, which is crucial for establishing industrial symbiosis. This thesis presents a normative model for the development of a business model required for creating sustainable industrial ecosystems, which contributes to approaches at the policy-makers’ level, proposed earlier. Therefore, this study addresses the call for more research on the business level of industrial ecosystem formation and the implications for the business models of the involved actors. Moreover, the thesis increases the understanding of system innovation and innovation in business ecosystems by explicating how business model innovation can be the trigger for achieving more sustainable industry structures, such as those relying on industrial symbiosis.

Show me your brain! Stories of interdisciplinary knowledge creation in practice. Experiences and observations from Aalto Design Factory, Finland.

This dissertation centres on the themes of knowledge creation, interdisciplinarity and knowledge work. My research approaches interdisciplinary knowledge creation (IKC) as practical situated activity. I argue that by approaching IKC from the practice-based perspective makes it possible to “deconstruct” how knowledge creation actually happens, and demystify its strong intellectual, mentalistic and expertise-based connotations. I have rendered the work of the observed knowledge workers into something ordinary, accessible and routinized. Consequently this has made it possible to grasp the pragmatic challenges as well the concrete drivers of such activity. Thus the effective way of organizing such activities becomes a question of organizing and leading effective everyday practices. To achieve that end, I have conducted ethnographic research of one explicitly interdisciplinary space within higher education, Aalto Design Factory in Helsinki, Finland, where I observed how students from different disciplines collaborated in new product development projects. I argue that IKC is a multi-dimensional construct that intertwines a particular way of doing; a way of experiencing; a way of embodied being; and a way of reflecting on the very doing itself. This places emphasis not only the practices themselves, but also on the way the individual experiences the practices, as this directly affects how the individual practices. My findings suggest that in order to effectively organize and execute knowledge creation activities organizations need to better accept and manage the emergent diversity and complexity inherent in such activities. In order to accomplish this, I highlight the importance of understanding and using a variety of (material) objects, the centrality of mundane everyday practices, the acceptance of contradictions and negotiations well as the role of management that is involved and engaged. To succeed in interdisciplinary knowledge creation is to lead not only by example, but also by being very much present in the very everyday practices that make it happen.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Production Quality Analysis of Special Elevator Cars Based on Six Sigma Approach

Project scope is to utilize Six Sigma DMAIC approach and lean principles to improve production quality of the case company. Six Sigma tools and techniques are explored through a literature review and later used in the quality control phase. The focus is set on the Pareto analysis to demonstrate the most evident development areas in the production. Materials that are not delivered to the customer or materials that damaged during transportation comprise the biggest share of all feedbacks. The goal is set to reduce these feedbacks by 50 %. Production observation pointed out that not only material shortages but also over-production is a daily situation. As a result, an initial picking list where the purchased and own production components can be seen, is created, reduction of over- and underproduction and material marking improvement are seen the most competitive options so that the goal can be reached. The picking list development should still continue to make sure that the list can be used not only in the case study but also in the industrial scale. The reduction of material missing category can be evaluated reliably not sooner than in few years because it takes time to gather the needed statistical information.

Secular Possession: Cinematic Iconography of Addiction

Addiction, and the experience of being addicted, is notoriously difficult to describe verbally and explain rationally. Would multifaceted and multisensory cinematic images work better in making addiction understandable? This study enquires how cinematic expression can render visible the experience of being addicted which is invisible as such. The basic data consists of circa 50 mainly North American and European fiction films from the early 1900s to the early 2000s that deal with addictive disorders as defined in the psychiatric DSM-V classification (substance dependence- and gambling disorders). The study develops an approach for analyzing and interpreting a large volume of digital film data: digital cinematic iconography is a framework to study the multifaceted cinematic images by processing and viewing them in the “digital image-laboratory” of the computer. Images are cut and classified by editing software and algorithmic sorting. The approach draws on early 1900s German art historian Aby Waburg’s image research and media archaeology, that are connected to film studies inspired by the phenomenology of the body and Gilles Deleuze’s film-philosophy. The first main chapter, “Montage”, analyses montage, gestural and postural images, and colors in addiction films. The second main chapter, “Thingness”, focuses on the close-ups of material objects and faces, and their relation to the theme of spirituality in cinema and art history, The study argues that the cinema engages the spectator to "feel" what addiction is through everyday experience and art historical imagery. There is a particular, historically transmitted cinematic iconography of addiction that is profane, material, thing-centered, abject, and repetitive. The experience of being addicted is visualized through montages of images characterized by dark and earthy colors, horizontal compositions and downward- directed movements. This is very profane and secular imagery that, however, circulates image-historical traces of Christian iconography, such as that of being in the grip of an unknown power.

Voiko totuutta tavoittaa? : direct cinema -tyylisuunnan käyttö dokumenttielokuvassa

The subject of this study is the use of direct cinema style in documentary film. The main purpose of this thesis was to the research the ways in which direct cinema style attempts to show and achieve truth in documentary films. The following questions were posed: Is it possible to depict reality in a documentary film; how does the choice of using this style affect the final documentary? The essential purpose of this study was to try to see whether the direct cinema style works when trying to achieve truth in a documentary film. This work consints of two elements, the theoretical part and the short documentary. The theoretical part deals with the history, the truth, and the direct cinema- style in documentaries. The theoretical information of direct cinema has been used when making the short documentary. In the documentary Tuloaula 2 I have studied the way in which using direct cinema -style works in practise. The documentary has followed as strictly as possible the direct cinema style. I was the director, the cameraman and the editor of my documentary film. In the documentary film Tuloaula 2 it appeared that the direct cinema style works best when filming everyday life. By using this style it is easy for the director to observe and leave his own persona in the background. The strength in using the direct cinema style is that it enables the viewer to build his/her own impression on the subject. Even though the direct cinema style aims to achieve objectivity the director has to make numerous subjective choices during both the filming and the editing process. These subjective choices automatically effect the "truth" of the documentary film. The difficulty in a direct cinema style is the large amount of material. This often leads to a long editing phase, which is not often possible in the busy production schedules. The direct cinema style is not at its best when shooting people who are passive because their attention often focuses too much on the camera. In general, the best way to make a documentary film would be to use many documentary styles in one film and not to srictly concentrate on only one style.

Materiaalitietokanta prosessilaitetoimituksen laitevalintojen tukena

In this master's thesis, material characteristics which includes material database will be developed, through which will be managed process device deliveries device selections. The analysed bulk materials exact values serve as basic data when choosing glass- and dried product industry raw material equipment solutions. In this study, the material database function structure will be divided into classified bulk materials characteristics and process device guidelines and planning which they are based on. In order to achieve the best possible advantage in use of the material database, the raw material handling with the process equipment has to be controlled with the help of database bulk material information. With the help of material database, the personnel of the company will find the needed material and device information to implement the processes. The structure of the database enables adding of information, and hence the database will be always kept updated. The material database uses free PhpOpenDatabase software programme, which adapts itself flexibly with the software and requirements of the company. The material frame and considered features of the material database were determined by the requirements of the company's device technology. National and international classifications were used as help. The collected material information was analysed and the correspondence between internal study results and found classifications were determined. As presented before, on the grounds of chosen and specified material features, also the controllability of device selecting and solutions was improved with device-specific screening and planning guidelines. As material frame of the material database was chosen ANSI/CEMA Standard 550. Its almost 1000 bulk materials form an extensive database frame. Over 600 of these raw materials have been determined according to classification. However, the most important ones are the materials of glass- and dried material plants, which consist of the last part of material frame. The analysis will be sustained and material information will be completed primarily of material part with test run in one's own material laboratory.

Materiaalitarpeen suunnitteluprosessin kehittäminen ja varastonohjauksen parantaminen Elektroniikkalaitoksessa

Työ on tehty Puolustusvoimien Elektroniikkalaitoksella Riihimäellä. Elektroniikkalaitos toimii yhtenä vastuuvarikkona ja vastaa omalta osaltaan elektroniikka-alan järjestelmien kunnossapidosta. Työn tarkoituksena on selvittää materiaalitarpeen suunnitteluprosessi, kehittää varastonohjausta ja tutustua SAP-toiminnallisuuksien hyödyntämiseen. Materiaalitarpeen suunnittelemisella ja varastonohjauksen parantamisella pyritään kustannussäästöihin ja kunnossapitoprosessin kokonaisvaltaiseen tehostamiseen. Työssä käsitellään Elektroniikkalaitoksen materiaaliprosessia ja sen suhdetta kunnossapitoprosessiin sekä selvitetään materiaalitarpeen muodostumista ja kysynnän ennustamistarpeita. Samalla esitetään myös varastonohjauksen parantamiskohteita. Materiaalitarpeen suunnitteluprosessista on luotu toimintamalli, jota on testattu pilottiprojektin avulla. Työssätarkastellaan SAP-toiminnallisuuksien hyödyntämistä sekä materiaalitarpeen suunnittelussa, että varastonohjauksessa. Lisäksi esitellään kustannusarviolomake, joka on luotu osaksi materiaalitarpeen suunnitteluprosessia helpottamaan materiaalitäydennysten kustannusarviointia.

Tilaus- toimitusprosessin kehittäminen tilausohjautuvassa tuotannossa

Diplomityön tavoitteena on tilaus- toimitusprosessin kehittäminen tilausohjautuvassa tuotannossa. Prosessin nykytilan tarkemman analysoinnin avulla on tarkoitus lisätä prosessissa työskentelevien henkilöiden käsitystä siitä, miten prosessi toimii tällä hetkellä sekä minkälaisesta liiketoiminnasta onkaan kyse. Tämä työ on osa laajempaa kohdeyrityksessä meneillään olevaa kehitysprojektia, jonka päätöksentekoa on tarkoitus tukea tässä työssä tehtyjen analyysien avulla.Työ on jakautunut kolmeen osaan; teoria-, analyysi- sekä synteesiosaan. Teoriaosassa käsitellään prosesseja yleisesti, niiden kehittämistä sekä mittaamista. Prosessien kehittämismenetelmistä esitellään kapeikkoajattelu sekä Lean-tuotanto. Analyysiosassa käsitellään tilastollistenanalyysien perusteella prosessin nykytilaa ja liiketoiminnan luonnetta. Pilottitoimitus sekä laajemman kehitysprojektin esittely kuuluvat myös analyysiosan sisältöön. Analyysiosan perusteella tuotteiden läpimenoaikaa voidaan lyhentää vähentämällä eri vaiheiden välisiä odotusaikoja. Myös materiaalien saatavuus tulisi varmistaa kehittämällä tavaralogistiikkaa. Synteesiosassa on listattu käytännönläheisiä kehitysehdotuksia prosessin suorituskyvyn parantamiseksi. Pohjana ehdotuksille on analyysiosassa ilmenneet ongelmat. Laajempana kehityskohteena esitellään kolmivaiheinen muutosprosessi, jonka avulla voidaan tehostaa tavaralogistiikkaa ulkoistamisen avulla.