Ajoneuvokatsastuksen valvontamalli

Tutkimuksessa kehitettiin ajoneuvokatsastuksen suorituskykymittari sekä suorituskyvyn johtamiseen perustuva ajoneuvokatsastuksen valvontamalli. Suorituskykymittarin avulla voidaan mitata ajoneuvokatsastuksen suorituskykyä, seurata suorituskyvyn kehitystä, suunnitella ja päättää mitä pitäisi parantaa sekä seurata tehtyjen toimenpiteiden vaikutuksia eli johtaa toimintaa. Tutkimuksessa kehitetty suorituskykymittari perustuu Liikenteen turvallisuusviraston ylläpitämään ajoneuvoliikennerekisteriin tallennettujen katsastustietojen analysointiin sekä tilastollisten prosessin ohjausmenetelmien (SPC) hyödyntämiseen. Tutkimuksessa kehitetyssä ajoneuvokatsastuksen valvontamallissa Liikenteen turvallisuusviraston valvontatoimintoja sekä katsastusyritysten omaa laadunhallintaa johdetaan suorituskykymittarin avulla. Tutkimuksessa kehitetyn suorituskykymittarin ja valvontamallin avulla Liikenteen turvallisuusvirastolla ja katsastusyrityksillä on aiempaa paremmat edellytykset valvoa ja johtaa ajoneuvokatsastuksen suorituskykyä katsastustoiminnalle asetettujen tavoitteiden kannalta vaikuttavasti ja oikein. Tutkimus toteutettiin konstruktiivista tutkimusotetta käyttäen ja tutkimuksessa kehitetty ajoneuvokatsastuksen valvontamalli implementoitiin osaksi kansallista lainsäädäntöä sekä Liikenteen turvallisuusviraston ja katsastusyritysten johtamistoimintoja.

”Stress Monitoring via Wearable Electrodermal Sensors”

Stress is a phenomenon that on some level affects everyone’s lives on a daily basis. The autonomic nervous system controls the varying levels of stress at any given time. The responses of the autonomic nervous system adjust the body to cope with changing external and internal conditions. During high-stress situations the body is forced into a state of heightened alertness, which passes when the stressor is removed. The stressor can be any external or internal event that causes the body to respond. Stress is a very versatile phenomenon that can be both a cause and an indicator of other medical conditions, for example cardiovascular disease. Stress detection can therefore be helpful in identifying these conditions and monitoring the overall emotional state of a person. Electrodermal activity (EDA) is one of the most easily implemented ways to monitor the activity of the autonomic nervous system. EDA describes changes occurring in the various electrical properties of the skin, including skin conductivity and resistance. Increased emotional sweating has been proven to be one possible indication of stress. On the surface of the skin, increased sweating translates to increased skin conductivity, which can be observed through EDA measurements. This makes electrodermal activity a very useful tool in a wide range of applications where it is desirable to observe changes in a person’s stress level. EDA can be recorded by using specialized body sensors placed on specific locations on the body. Most commonly used recording sites are the palms of the hands due to the high sweat gland density on those areas. Measurement is done using at least two electrodes attached to the skin, and recording the electrical conductance between them. This thesis implements a prototype of a wireless EDA measurement system. The feasibility of the prototype is also verified with a small group of test subjects. EDA was recorded from the subjects while they were playing a game of Tetris. The goal was to observe variations in the measured EDA that would indicate changes in the subjects’ stress levels during the game. The analysis of the obtained measurement results confirmed the connection between stress and recorded EDA. During the game, random occurrences of lowered skin resistance were clearly observable, which indicates points in the game where the player felt more anxious. A wireless measurement system has the potential of offering more flexible and comfortable long-term measuring of EDA, and could be utilized in a wide range of applications.

Creating and measuring customer value in digital businesses

Most economic transactions nowadays are due to the effective exchange of information in which digital resources play a huge role. New actors are coming into existence all the time, so organizations are facing difficulties in keeping their current customers and attracting new customer segments and markets. Companies are trying to find the key to their success and creating superior customer value seems to be one solution. Digital technologies can be used to deliver value to customers in ways that extend customers’ normal conscious experiences in the context of time and space. By creating customer value, companies can gain the increased loyalty of existing customers and better ways to serve new customers effectively. Based on these assumptions, the objective of this study was to design a framework to enable organizations to create customer value in digital business. The research was carried out as a literature review and an empirical study, which consisted of a web-based survey and semi-structured interviews. The data from the empirical study was analyzed as mixed research with qualitative and quantitative methods. These methods were used since the object of the study was to gain deeper understanding about an existing phenomena. Therefore, the study used statistical procedures and value creation is described as a phenomenon. The framework was designed first based on the literature and updated based on the findings from the empirical study. As a result, relationship, understanding the customer, focusing on the core product or service, the product or service quality, incremental innovations, service range, corporate identity, and networks were chosen as the top elements of customer value creation. Measures for these elements were identified. With the measures, companies can manage the elements in value creation when dealing with present and future customers and also manage the operations of the company. In conclusion, creating customer value requires understanding the customer and a lot of information sharing, which can be eased by digital resources. Understanding the customer helps to produce products and services that fulfill customers’ needs and desires. This could result in increased sales and make it easier to establish efficient processes.

Development of management accounting practices in energy operations in a forest industry Company

The aim of this master’s thesis was to map the management accounting processes and reporting of an internal service unit. The research was conducted in energy services in a forest industry company. Research questions and the results of the study are highly specific for the case unit although some generalizable features of management accounting in internal service units under shared services were searched. The research was carried out as a qualitative action research and a single case study. Internal benchmarking was used to find best practices from other units and to get a comprehensive understanding of the financial processes of the case company. Empirical data for the study was collected with participant observation, interviews of experts and by exploring internal company documents. A literature review was conducted to outline the subject and to support the study. Although the management accounting processes of the case unit were found to be on a good level, some improvement ideas were presented. Results of the research show that the needs of the customers are in the key role in the processes of an internal service unit. Management accounting and reporting need to support the company strategy and management decision-making. To evaluate the performance of the service unit both financial and non-financial measures are needed.

Performance Evaluation and Calibration of Machine Vision Measurement

This thesis presents the calibration and comparison of two systems, a machine vision system that uses 3 channel RGB images and a line scanning spectral system. Calibration. is the process of checking and adjusting the accuracy of a measuring instrument by comparing it with standards. For the RGB system self-calibrating methods for finding various parameters of the imaging device were developed. Color calibration was done and the colors produced by the system were compared to the known colors values of the target. Software drivers for the Sony Robot were also developed and a mechanical part to connect a camera to the robot was also designed. For the line scanning spectral system, methods for the calibrating the alignment of the system and the measurement of the dimensions of the line scanned by the system were developed. Color calibration of the spectral system is also presented.

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

FLASH-OFDM System Performance Studies for Wireless Broadband Network Operator Services

@450 wireless broadband service is Digita’s mobile wireless broadband network service. In @450 network Digita acts as the network operator offering network capacity to service operators. For Digita it is important to know what kind of services its network is capable of and what are the network’s service parameters. The knowledge of the network parameters and the behaviour can be used in advance in the development of new service products. Before a new service product can be offered to service operators a lot of work has to be done. The basic testing is necessary to get an understanding of the basic functionality. The requirement specification has to be done and a new product has to be created. The new product has to be tested. The test results have to be analysed in order to find out if the new product is suitable for real use and with which limitations. The content of this Thesis is the development of wireless technologies, @450 service and network, FLASH-OFDM technology, FLASH-OFDM performance testing and the development of a new service product.

Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Energy storage in electric drive system

In recent years the environmental issues and the energy saving have become increasingly import in modern society where industry is the major emission factor and energy consumer. Generally, most of the total energy consumption is caused by electrical drives used in industrial applications and thus improving the performance of electrical drives give an opportunity to improve the energy efficiency. In this Master Thesis improving the energy efficiency in different electrical drives is clarified with different cases: regenerative braking in the electric grid or recovery of the braking energy into an energy storage. In addition, as an example, the energy consumption of an elevator is analyzed by measurements. From these measurement results it can be estimated how much the share of the standby energy consumption is from the total energy consumption and how much regenerative energy is available. The latter part of the thesis concentrates on determination of the properties of lithium iron phosphate battery with measurements.

Maintaining supply performance during an ERP system implementation phase : case Cloetta Suomi Oy

Implementing an enterprise resource planning (ERP) system often means a major change to an organization and involves significant risks. It is typical that many of the ERP system implementations fail resulting in tremendous damage to the business. Moreover, running normal business operations during an ERP system implementation is far more complicated than normally. This thesis focuses on how an organization should manage the ERP system implementation process in order to maintain supply performance during the implementation phase. The theoretical framework in this thesis focuses on ERP system implementations with a critical success factor approach. Critical success factors can be divided into strategic and tactical level success factors. By considering these critical success factors, ERP system implementation project’s timeline and best practices of an ERP implementation, a critical success factor based ERP system implementation management framework is presented. The framework can be used as a theoretical framework when the goal is to avoid ERP system implementation phase issues that are driven by the ERP system implementation project and that may decrease organization’s supply performance. This thesis is a case study that was written on an assignment to a confectionary company Cloetta Suomi Oy. In order to collect data, interviews of the case company personnel were conducted. In addition, several other data collection methods were used throughout the research process. These data collection methods include examination of presentations and archival records as well as direct observations in case company meetings and in various work duties. The results of this thesis indicate that there are several factors that may decrease organization’s supply performance during the ERP system implementation. These issues are categorized under external and internal issues and further into six risk drivers that are suppliers, customers, products, staff, information systems and other projects. After the description and categorization of each issue, the thesis focuses on finding solutions on how to avoid or mitigate the impact of these issues on the organization’s supply performance. This examination leads to several operational activities that are also practical to business practitioners. It is also stated that a successful ERP system implementation that also causes minimal disturbance to organization’s supply performance during the ERP system implementation, is achieved by considering three levels of actions.

Applying customer value measurement to a customer loyalty program: Case of implementing a key performance indicator based on customer value

In recent decade customer loyalty programs have become very popular and almost every retail chain seems to have one. Through the loyalty programs companies are able to collect information about the customer behavior and to use this information in business and marketing management to guide decision making and resource allocation. The benefits for the loyalty program member are often monetary, which has an effect on the profitability of the loyalty program. Not all the loyalty program members are equally profitable, as some purchase products for the recommended retail price and some buy only discounted products. If the company spends similar amount of resources to all members, it can be seen that the customer margin is lower on the customer who bought only discounted products. It is vital for a company to measure the profitability of their members in order to be able to calculate the customer value. To calculate the customer value several different customer value metrics can be used. During the recent years especially customer lifetime value has received a lot of attention and it is seen to be superior against other customer value metrics. In this master’s thesis the customer lifetime value is implemented on the case company’s customer loyalty program. The data was collected from the customer loyalty program’s database and represents year 2012 on the Finnish market. The data was not complete to fully take advantage of customer lifetime value and as a conclusion it can be stated that a new key performance indicator of customer margin should be acquired in order to profitably drive the business of the customer loyalty program. Through the customer margin the company would be able to compute the customer lifetime value on regular basis enabling efficient resource allocation in marketing.

Value perceptions of measurement and monitoring system customers

The value that the customer perceives from a supplier’s offering, impacts customer’s decision making and willingness to pay at the time of the purchase, and the overall satisfaction. Thus, for a business supplier, it is critical to understand their customers’ value perceptions. The objective of this thesis is to understand what measurement and monitoring system customers value, by examining their key purchasing criteria and perceived benefits. Theoretical part of this study consists on reviewing relevant literature on organizational buying behavior and customer perceived value. This study employs a qualitative interview research method. The empirical part of this research consisted of conducting 20 in-depth interviews with life science customers in USA and in Europe. Quality and technical features are the most important purchasing criteria, while product-related benefits seem to be the most important perceived benefits. At the marketing of the system, the emphasis should be at which regulations the system complies with, references of supplier’s prior experience, the reliability and usability of the system, and total costs. The benefits that should be emphasized are the better control of customer’s process, and the proof of customer’s product quality