Improving the competitiveness of electrolytic Zinc process by chemical reaction engineering approach

This doctoral thesis describes the development work performed on the leachand purification sections in the electrolytic zinc plant in Kokkola to increase the efficiency in these two stages, and thus the competitiveness of the plant. Since metallic zinc is a typical bulk product, the improvement of the competitiveness of a plant was mostly an issue of decreasing unit costs. The problems in the leaching were low recovery of valuable metals from raw materials, and that the available technology offered complicated and expensive processes to overcome this problem. In the purification, the main problem was consumption of zinc powder - up to four to six times the stoichiometric demand. This reduced the capacity of the plant as this zinc is re-circulated through the electrolysis, which is the absolute bottleneck in a zinc plant. Low selectivity gave low-grade and low-value precipitates for further processing to metallic copper, cadmium, cobalt and nickel. Knowledge of the underlying chemistry was poor and process interruptions causing losses of zinc production were frequent. Studies on leaching comprised the kinetics of ferrite leaching and jarosite precipitation, as well as the stability of jarosite in acidic plant solutions. A breakthrough came with the finding that jarosite could precipitate under conditions where ferrite would leach satisfactorily. Based on this discovery, a one-step process for the treatment of ferrite was developed. In the plant, the new process almost doubled the recovery of zinc from ferrite in the same equipment as the two-step jarosite process was operated in at that time. In a later expansion of the plant, investment savings were substantial compared to other technologies available. In the solution purification, the key finding was that Co, Ni, and Cu formed specific arsenides in the “hot arsenic zinc dust” step. This was utilized for the development of a three-step purification stage based on fluidized bed technology in all three steps, i.e. removal of Cu, Co and Cd. Both precipitation rates and selectivity increased, which strongly decreased the zinc powder consumption through a substantially suppressed hydrogen gas evolution. Better selectivity improved the value of the precipitates: cadmium, which caused environmental problems in the copper smelter, was reduced from 1-3% reported normally down to 0.05 %, and a cobalt cake with 15 % Co was easily produced in laboratory experiments in the cobalt removal. The zinc powder consumption in the plant for a solution containing Cu, Co, Ni and Cd (1000, 25, 30 and 350 mg/l, respectively), was around 1.8 g/l; i.e. only 1.4 times the stoichiometric demand – or, about 60% saving in powder consumption. Two processes for direct leaching of the concentrate under atmospheric conditions were developed, one of which was implemented in the Kokkola zinc plant. Compared to the existing pressure leach technology, savings were obtained mostly in investment. The scientific basis for the most important processes and process improvements is given in the doctoral thesis. This includes mathematical modeling and thermodynamic evaluation of experimental results and hypotheses developed. Five of the processes developed in this research and development program were implemented in the plant and are still operated. Even though these processes were developed with the focus on the plant in Kokkola, they can also be implemented at low cost in most of the zinc plants globally, and have thus a great significance in the development of the electrolytic zinc process in general.

Brand Identity and Image in B2B Factory Automation Context

The goal of this thesis is to study how a solution-oriented business-to-business company can utilize its brand as a strategic asset by using the concepts of brand identity and brand image. The study analyses the intended brand message (identity) contrasting it with the customer perceptions (image) to reveal points of parity and congruence. The study uses a case company as an example and discusses the benefits of brand management as well. Internally, brands can be studied by performing a set of interviews amongst top and middle management. The interviews need to consider the various elements of branding from associations to differentiation and value creation. Customers’ perceptions can be reliably studied via online survey designed to compare the intended brand message with customers’ experiences. From the perspective of industrial management the incentive for brand development lies in both monetary and managerial benefits. In literature the four essential benefits of B2B branding are risk dilution, efficiency of communications, strategic direction and price premiums. As a result, suggestive models for brand identity and image were devised and compared. The Case Company perceives itself as a technically oriented open-integrator, with a strong focus on reliability and customer service. Customers agree with the picture in general, but there are some points of parity as well: they are quite satisfied with the company and perceive it as reliable and providing the promised value. The problematic areas revolve around customer interaction and maintaining the leadership position. The results confirm previous findings in B2B branding theory, where the reliability and credibility of the supplier are in major role. The results also suggest a holistic, corporate approach on branding.

Asiakastoimialojen vaikutukset yrityksen myynnin kehitykseen

Työn tavoitteena oli tutkia asiakkaiden toimialojen muutoksen, esimerkiksi taantuman, vaikutuksia Mikpolis Oy:n puutekniikan myynnin kehitykseen aikajaksolla 2007–2014. Työssä tutustuttiin markkinoinnin ja talouden osa-alueisiin. Tutkimuksessa yrityksen asiakastiedoista muodostettiin useita arvoanalyysejä, joita tehtiin päätuoteryhmistä, tuotesegmenteistä, asiakkaista ja asiakkaiden toimialoista. Yrityksen sisäisiä tekijöitä tutkittiin SWOT -analyysillä ja havainnoimalla aiempia selvityksiä. Lisäksi haastateltiin asiakastoimialojen edustajia. Päätuoteryhmät myynnin määrän perusteella ovat NC-koneistuspalvelut, erityisesti lasikuitu- ja huonekaluteollisuuden segmenteissä, sekä puun testauspalvelut. Asiakkaat jaoteltiin A-, B- ja C-asiakkaisiin myyntimäärän suhteen. Huolestuttavan suuri osa avainasiakkaista on konkurssissa. Tavoiteltavat toimialat tulevaisuudessa ovat laivarakennus-, ajoneuvo- ja koneenrakennusteollisuus sekä koulutus ja testaustoiminta. Mikpolis Oy:llä parantamisen varaa on erityisesti markkinoinnissa ja investoinneissa. Asiakastoimialojen muutokset vaikuttavat yrityksen myyntiin, mutta yritys voi vaikuttaa asiaan sisäisillä tekijöillä, joita ovat markkinointi ja tuotetarjonta.

Working Capital Management Model in value chains

The objective of this Master’s thesis is to create a calculation model for working capital management in value chains. The study has been executed using literature review and constructive research methods. Constructive research methods were mainly modeling. The theory in this thesis is founded in research articles and management literature. The model is developed for students and researchers. They can use the model for working capital management and comparing firms to each other. The model can also be used to cash management. The model tells who benefits and who suffers most in the value chain. Companies and value chains cash flows can be seen. By using the model can be seen are the set targets really achieved. The amount of operational working capital can be observed. The model enables user to simulate the amount of working capital. The created model is based on cash conversion cycle, return on investment and cash flow forecasting. The model is tested with carefully considered figures which seem to be though realistic. The modeled value chain is literally a chain. Implementing this model requires from the user that he/she have some kind of understanding about working capital management and some figures from balance sheet and income statement. By using this model users can improve their knowledge about working capital management in value chains.

Managing Customer Issues through a Support Channel Network

The importance of after-sales service or service in general can be seen and experienced by customers every day with industrial as well as other non-industrial services or products. This dissertation, drawing on theory and experience, focuses on practical engineering implications, specifically the management of customer issues in the after-sales phase in the mobile phone arena. The main objective of this doctoral dissertation is to investigate customer after-sales issue management, specifically regarding mobile phones. The case studies focus on issue resolution time and the issue of corrective actions. This dissertation consists of a main body and four peer-reviewed journal articles and one manuscript currently under review by a peer-reviewed journal. The main body of this dissertation examines the elements of customer satisfaction, loyalty, and retention with respect to corrective actions to address customer issues and issue resolution time through literature and empirical studies. The five independent works are case studies supporting the thesis research questions. This study examines four questions: 1) What are the factors affecting corrective actions for customers? 2) How can customer issue resolution time be controlled? 3) What are the factors affecting processes in the service chain? and 4) How can communication be measured in a service chain? In this work, both quantitative and qualitative analysis methods are used. The main body of the thesis reviews the literature regarding the elements that bridge the five case studies. The case studies of the articles and surveys lean more toward the methodology of critical positivism and then apply the interpretive approach in interpreting the results. The case study articles employ various statistical methods to analyze and to interpret the empirical and survey data. The statistical methods were used to create a model that is useful for significantly optimizing issue resolution time. Moreover, it was found that samples for verifying issues provided by the customer neither improve the perceived quality of corrective actions nor the perceived quality of issue resolution time. The term “service” in this work is limited to the technical services that are provided by product manufacturers and after-sales authorized service vendors. On the basis of this research work, it has been observed that corrective actions and issue resolution time are associated with customer satisfaction and hence, according to induction theory, to customer loyalty and retention. This thesis utilizes knowledge of marketing and customer relationships to contribute to the existing body of knowledge concerning information and communication technology for after-sales service recovery of mobile terminals. The established models in the thesis contribute to the existing knowledge of the after-sales process of dealing with customer issues in the field of mobile phones. The findings suggest that process managers could focus more on communication and training provided to the staff as new technology evolves rapidly. The study also suggest the managers formulate strategies for how customers can be kept informed on a regular basis of the status of issues that have been escalated for corrective action. The findings also lay the foundation for the comprehensive objective to control the entire product development process, starting with conceptualization. This implies that robust design should be applied to the new products so that problems affecting customer service quality are not repeated. The objective will be achieved when the entire service chain from product development to the final user can be modeled and this model can be used to support the organization at all levels.

The Invisible Institutional Repository: Missing a Trick (and Missing Fulltext)?

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

University Institutional Repository and its Place in the University Information Infrastructure

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Introducing the new and improved DMPTool

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Service offering classification for logistics services

This thesis studies the development of service offering model that creates added-value for customers in the field of logistics services. The study focusses on offering classification and structures of model. The purpose of model is to provide value-added solutions for customers and enable superior service experience. The aim of thesis is to define what customers expect from logistics solution provider and what value customers appreciate so greatly that they could invest in value-added services. Value propositions, costs structures of offerings and appropriate pricing methods are studied. First, literature review of creating solution business model and customer value is conducted. Customer value is found out with customer interviews and qualitative empiric data is used. To exploit expertise knowledge of logistics, innovation workshop tool is utilized. Customers and experts are involved in the design process of model. As a result of thesis, three-level value-added service offering model is created based on empiric and theoretical data. Offerings with value propositions are proposed and the level of model reflects the deepness of customer-provider relationship and the amount of added value. Performance efficiency improvements and cost savings create the most added value for customers. Value-based pricing methods, such as performance-based models are suggested to apply. Results indicate the interest of benefitting networks and partnership in field of logistics services. Networks development is proposed to be investigated further.

Container logistic innovations in forest-energy sector: Markets, future service concepts and technical improvements

The report presents the results of the commercialization project called the Container logistic services for forest bioenergy. The project promotes new business that is emerging around overall container logistic services in the bioenergy sector. The results assess the European markets of the container logistics for biomass, enablers for new business creation and required service bundles for the concept. We also demonstrate the customer value of the container logistic services for different market segments. The concept analysis is based on concept mapping, quality function deployment process (QFD) and business network analysis. The business network analysis assesses key shareholders and their mutual connections. The performance of the roadside chipping chain is analysed by the logistic cost simulation, RFID system demonstration and freezing tests. The EU has set the renewable energy target to 20 % in 2020 of which Biomass could account for two-thirds. In the Europe, the production of wood fuels was 132.9 million solid-m3 in 2012 and production of wood chips and particles was 69.0 million solidm3. The wood-based chips and particle flows are suitable for container transportation providing market of 180.6 million loose- m3 which mean 4.5 million container loads per year. The intermodal logistics of trucks and trains are promising for the composite containers because the biomass does not freeze onto the inner surfaces in the unloading situations. The overall service concept includes several packages: container rental, container maintenance, terminal services, RFID-tracking service, and simulation and ERP-integration service. The container rental and maintenance would provide transportation entrepreneurs a way to increase the capacity without high investment costs. The RFID-concept would lead to better work planning improving profitability throughout the logistic chain and simulation supports fuel supply optimization.

Language of the Future, Language of the PRC –Representations of Putonghua in South China Morning Post

As the national language of the PRC, the world's growing economic power and the sovereign of Hong Kong, Putonghua is a language with multiple facets of relevance for the current Special Administrative Region. This paper seeks to explore and explain different representations of Putonghua in Hong Kong's leading English-language newspaper South China Morning Post in articles published between January 2012 and February 2013. The representations are studied in the context of the different discourses in which they appear, some of which feature language(s) as a central theme and some more marginally. An overview is first presented of the scholarly research on the most important developments in Hong Kong's complex language scene from the beginnings of the colony until present day, with the aim of detecting developments and attitudes with potential relevance or parallels to the context of Putonghua today. The paper then reflects on the media and its role in producing and perpetuating discourses in the society, before turning to more practical considerations on Hong Kong's English and Chinese language media and the role of South China Morning Post in it. The methods used in analysing the discourses are those of discourse analysis, with textual analysis as its starting point, in which close attention is paid to linguistic forms as the concrete representations of meanings in a text. Particularly the immediate contexts of the appearances of the word “Putonghua” in the articles were studied carefully to detect vocabulary, grammar and semantical choices as signs of different discourses, potentially also revealing fundamental underlying assumptions and other “hidden meanings” in the text. Some of the most distinctive discourses in which different representations of Putonghua appeared were the Instrumental value for the individual (in which Putonghua was represented as a form of social capital); Othering of the mainlanders (in which Putonghua served as a concrete marker of distinction); Belonging to China (Putonghua as a symbol of unity); and Cultural distinctiveness of Hong Kong (Putonghua as a threat to Hong Kong's history and culture, as embodied in Cantonese). Some of these discourses were more prominent than others, and for example the discourse of Belonging to China was relatively rarely enacted in Hongkongers' voices. In general, the findings were not surprising in the light of the history, but showed a fair degree of consistency with what has been written earlier about the languages and attitudes towards them in Hong Kong. It has often been noted that Putonghua and its relation with Cantonese is a matter linked with the social identity of the colony and its citizens. While it appeared that there were no strict taboos in the representations of Putonghua in the societal context, the possibility of self-censorship cannot be ruled out as a factor toning down political discourses in the representations.

Asiakasarvon selvittäminen ja palvelukonseptin kehittäminen muovialan pk-yrityksessä

Kahden yrityksen väliset transaktiot perustuvat pohjimmiltaan asiakkaan kokemaan arvoon, eli siihen, mitä hyötyjä asiakas kokee saavansa suhteessa niihin kustannuksiin, jotka se joutuu uhraamaan ne saavuttaakseen. Tämän arvon tulee parantaa asiakkaan asemaa suhteessa sen omaan kilpailutilanteeseen ja asiakkaisiin. Arvo voi muodostua tarjooman hinnoittelusta, mutta muita asiakasarvon ulottuvuuksia voivat olla muun muassa laatutekijät sekä asiakassuhteen ja toimittajan imagon vaikutukset. Tämän tutkimuksen tavoitteena on selvittää, mitkä ulottuvuuden muodostavat asiakkaan kokeman arvon case-yrityksen toimialalla sen urakoitsija- ja jälleenmyyjäasiakkailleen segmenteissä. Lisäksi analysoidaan, kuinka tuotantoon keskittyneen yrityksen tulisi kehittää palvelukonseptiaan luodakseen lisäarvoa kyseisille segmenteille ja saavuttaakseen siten kilpailuetua markkinoilla. Tutkimus on tapaustutkimus, jonka tärkeimpänä aineistonkeruumenetelmänä toimivat 17 nykyisten, entisten ja potentiaalisten asiakkaiden teemahaastattelua. Tulokset osoittavat, että toimiala on haastava lisäpalveluiden kannalta, koska ne eivät ole sille tyypillisiä. Asiakkaiden näyttää olevan erityisen vaikea tunnistaa palveluita, joista ne olisivat valmiita maksamaan. Tämä johtaa tilanteeseen, jossa asiakasuskollisuus ei ole erityisen korkea, vaan etenkin jälleenmyyjäasiakkaat ostavat tuotteet pääosin hintaan perustuen. Selkeän lisäarvopalvelukonseptin luominen voikin parantaa asiakasuskollisuutta ja sitä kautta asiakkaan elinkaaren arvoa, mikä voi rikkoa markkinoiden perinteisiä toimintamalleja case-yrityksen eduksi.

Asiakastyytyväisyys ja suosittelukäyttäytyminen vakuutusalalla

Tutkimuksen tarkoitus on tutkia asiakastyytyväisyyttä ja – tyytymättömyyttä sekä suosittelukäyttäytymistä vakuutusalalla. Tavoitteena on selvittää, mitkä tekijät vaikuttavat asiakaskokemukseen ja, miten asiakastyytyväisyystyytyväisyys tai -tyytymättömyys puolestaan vaikuttaa suosittelukäyttäytymiseen. Suosittelun katsotaan ilmaisevan asiakkaan sitoutumista yritykseen. Viime aikoina suosittelukäyttäytymiseen perustuva tutkimus on yleistynyt, koska yritykset ovat huomanneet suosittelun merkityksen ja sen tuottaman arvon liiketoiminnan kannattavuudelle. Sosiaalisen median lisääntyessä suosittelusta on tullut yhä enemmän osa arkeamme. Tutkimuksen teoriaosuudessa käsitellään palvelua, asiakastyytyväisyyttä ja – tyytymättömyyttä sekä suosittelukäyttäytymistä. Empiirisenä aineistona on primaariaineisto kohdeorganisaation asiakkailta. Tämän tutkimuksen kohdeorganisaatio on LähiTapiola Kaakkois-Suomi. Kysely on lähetetty sähköisesti syys-lokakuussa 2014 yrityksessä asioinneille. Tutkimustulosten mukaan tyytyväiset asiakkaat suosittelevat palvelua todennäköisimmin kuin tyytymättömät. Toisaalta havaittiin myös, että suosittelun todennäköisyyden ollessa korkeampi, asiakkaat antoivat enemmän myös rakentavaa palautetta. Tutkimus antoi suuntaa asioista, jotka ovat olennaisimpia kartoittaessa asiakkaan tyytyväisyyttä tai tyytymättömyyttä ja tietoa myös siitä, missä asioissa yrityksen toiminnassa on vielä kehittämistä. Keskittymällä oleellisiin asioihin, voidaan lisätä asiakkaiden tyytyväisyyttä. Tuloksista voidaan myös arvioida henkilökunnan tietämyksen ja koulutuksen lisäämisen tarvetta.

Portfolio Selection via Composite Measure Analysis: Evidence from the U.S. Stock Market

The aim of this research is to examine the pricing anomalies existing in the U.S. market during 1986 to 2011. The sample of stocks is divided into decile portfolios based on seven individual valuation ratios (E/P, B/P, S/P, EBIT/EV, EVITDA/EV, D/P, and CE/P) and price momentum to investigate the efficiency of individual valuation ratio and their combinations as portfolio formation criteria. This is the first time in financial literature when CE/P is employed as a constituent of composite value measure. The combinations are based on median scaled composite value measures and TOPSIS method. During the sample period value portfolios significantly outperform both the market portfolio and comparable glamour portfolios. The results show the highest return for the value portfolio that was based on the combination of S/P & CE/P ratios. The outcome of this research will increase the understanding on the suitability of different methodologies for portfolio selection. It will help managers to take advantage of the results of different methodologies in order to gain returns above the market.

Strategic management of value networks: how to create value in cross-sector collaboration and partnerships

Cross-sector collaboration and partnerships have become an emerging and desired strategy in addressing huge social and environmental challenges. Despite its popularity, cross-sector collaboration management has proven to be very challenging. Even though cross-sector collaboration and partnership management have been widely studied and discussed in recent years, their effectiveness as well as their ability to create value with respect to the problems they address has remained very challenging. There is little or no evidence of their ability to create value. Regarding all these challenges, this study aims to explore how to manage cross-sector collaborations and partnerships to be able to improve their effectiveness and to create more value for all partners involved in collaboration as well as for customers. The thesis is divided into two parts. The first part comprises an overview of relevant literature (including strategic management, value networks and value creation theories), followed by presenting the results of the whole thesis and the contribution made by the study. The second part consists of six research publications, including both quantitative and qualitative studies. The chosen research strategy is triangulation, as the study includes four types of triangulation: (1) theoretical triangulation, (2) methodological triangulation, (3) data triangulation and (4) researcher triangulation. Two publications represent conceptual development, which are based on secondary data research. One publication is a quantitative study, carried out through a survey. The other three publications represent qualitative studies, based on case studies, where data was collected through interviews and workshops, with participation of managers from all three sectors: public, private and the third (nonprofit). The study consolidates the field of “strategic management of value networks,” which is proposed to be applied in the context of cross-sector collaboration and partnerships, with the aim of increasing their effectiveness and the process of value creation. Furthermore, the study proposes a first definition for the strategic management of value networks. The study also proposes and develops two strategy tools that are recommended to be used for the strategic management of value networks in cross-sector collaboration and partnerships. Taking a step forward, the study implements the strategy tools in practice, aiming to show and to demonstrate how new value can be created by using the developed strategy tools for the strategic management of value networks. This study makes four main contributions. (1) First, it brings a theoretical contribution by providing new insights and consolidating the field of strategic management of value networks, also proposing a first definition for the strategic management of value networks. (2) Second, the study makes a methodical contribution by proposing and developing two strategy tools for value networks of cross-sector collaboration: (a) value network mapping, a method that allows us to assess the current and the potential value network and (b) the Value Network Scorecard, a method of performance measurement and performance prediction in cross-sector collaboration. (3) Third, the study has managerial implications, offering new solutions and empirical evidence on how to increase the effectiveness of cross-sector collaboration and also allow managers to understand how new value can be created in cross-sector partnerships and how to get the full potential of collaboration. (4) And fourth, the study also has practical implications, allowing managers to understand how to use in practice the strategy tools developed in this study, providing discussions on the limitations regarding the proposed tools as well as general limitations involved in the study.