Suljetun sähkönjakeluverkon regulaatio teollisuusympäristössä

Tässä työssä tutkitaan suljetun jakeluverkon regulaatiota yhden suomalaisen teollisuussähköverkon näkökulmasta ja sitä verrataan olemassa olevaan energiaviraston jakeluverkkoja koskevaan säätelymalliin. Työssä tutkitaan verkkoyhtiön kehittämän säätelymallin toimivuutta ja sitä kuinka se täyttää hyvän valvontamallin ominaispiirteet. Tässä työssä ei ole tarkoituksena esittää uutta valvontamallia, vaan tutkia ja arvioida olemassa olevia malleja. Työssä käydään läpi olemassa oleva kolmannen valvontajakson regulaatiomalli sekä muutokset, joita on esitetty tuleville valvontakausille. Työssä taustoitetaan valvontatoimintaa myös yleisen talousteorian ja valvontateorioiden avulla. Tämän taustoituksen avulla tarkastellaan teollisuussähköverkkojen erityisiä ominaisuuksia ja edelleen tutkitun teollisuussähköverkon korkeita käyttövaatimuksia ja syitä tällaisille vaatimuksille. Verkkoyhtiön käyttämä tariffimalli kuvataan myös sen liittyessä sääntelyyn saumattomasti. Työssä todistettiin mallin toimivuus tämän kaltaisessa toimintaympäristössä, jossa käyntivarmuusvaatimus on erittäin korkea. Havainnoissa myös korostuu mallin pitkäjänteisyys ja ennustettavuus. Laskentaesimerkkien avulla arvioidaan liittymähinnoittelun kohtuullisuutta asiakkaalle ja mallin toimivuutta yleensä. Näissä tarkasteluissa havaittiin, että yleisellä tasolla liittymähinnoittelu on kohtuullista asiakkaalle ja se mahdollistaa asiakkaan pääomien tehokkaamman käytön kuin ilman verkkoyhtiötä. Kehittämiskohteina tuodaan esille keskeytyksistä aiheutuvien haittojen käsittely ja se, ettei tällaiseen verkkoympäristöön ole tällä hetkellä toimivaa mittaria, jolla voitaisiin arvioida kuinka hyvin verkkoyhtiö toimii.

Liquidity levels of Finnish SME’s from 2007 to 2013 and a closer analysis of the IC sector

TAVOITTEET: Tämän tutkielman tarkoitus on tarkastella eri toimialojen likviditeettitasoja vuosien 2007 ja 2013 välillä. Se tarkastelee myös kassanhallinnan ja likviditeetin kirjallisuutta, erilaisia likviditeettiä kuvaavia tunnuslukuja sekä asioita, joilla on vaikutusta likviditeettiin. Tämän lisäksi se tutkii informaatio ja kommunikaatio sektoria tarkemmin. DATA: Data on kerätty Orbis tietokannasta. Toimialakohtaiset keskiarvot on laskettu joko kappaleen 2 esittämillä kaavoilla tai noudettu suoraan tietokannasta. Hajonta kuvaajat on tehty Excelillä ja korrelaatio matriisi ja regressioanalyysit SAS EG:llä. TULOKSET: Tämä tutkimus esittää toimialakohtaiset keskiarvot liquidity ratiosta, solvency ratiosta sekä gearingista, kuten monista muista likviditeettiä kuvaavista tai siihen vaikuttavista tunnusluvuista. Tutkimus osoittaa, että keskimäärin likviditeetti ja maksuvalmius ovat säilyneet melko samana, mutta toimialakohtaiset muutokset ovat voimakkaita. IC sektorilla likviditeettiin vaikuttaa katetuotto, työntekijöiden määrä, liikevaihto, taseen määrä sekä maksuaika.

Modelling the simultaneous effects of intellectual capital and knowledge management on the organisational performance of Finnish companies

The aim of this study was to contribute to the current knowledge-based theory by focusing on a research gap that exists in the empirically proven determination of the simultaneous but differentiable effects of intellectual capital (IC) assets and knowledge management (KM) practices on organisational performance (OP). The analysis was built on the past research and theoreticised interactions between the latent constructs specified using the survey-based items that were measured from a sample of Finnish companies for IC and KM and the dependent construct for OP determined using information available from financial databases. Two widely used and commonly recommended measures in the literature on management science, i.e. the return on total assets (ROA) and the return on equity (ROE), were calculated for OP. Thus the investigation of the relationship between IC and KM impacting OP in relation to the hypotheses founded was possible to conduct using objectively derived performance indicators. Using financial OP measures also strengthened the dynamic features of data needed in analysing simultaneous and causal dependences between the modelled constructs specified using structural path models. The estimates were obtained for the parameters of structural path models using a partial least squares-based regression estimator. Results showed that the path dependencies between IC and OP or KM and OP were always insignificant when analysed separate to any other interactions or indirect effects caused by simultaneous modelling and regardless of the OP measure used that was either ROA or ROE. The dependency between the constructs for KM and IC appeared to be very strong and was always significant when modelled simultaneously with other possible interactions between the constructs and using either ROA or ROE to define OP. This study, however, did not find statistically unambiguous evidence for proving the hypothesised causal mediation effects suggesting, for instance, that the effects of KM practices on OP are mediated by the IC assets. Due to the fact that some indication about the fluctuations of causal effects was assessed, it was concluded that further studies are needed for verifying the fundamental and likely hidden causal effects between the constructs of interest. Therefore, it was also recommended that complementary modelling and data processing measures be conducted for elucidating whether the mediation effects occur between IC, KM and OP, the verification of which requires further investigations of measured items and can be build on the findings of this study.

Item-level life-cycle model for maintenance network – from cost to additional value

The importance of industrial maintenance has been emphasized during the last decades; it is no longer a mere cost item, but one of the mainstays of business. Market conditions have worsened lately, investments in production assets have decreased, and at the same time competition has changed from taking place between companies to competition between networks. Companies have focused on their core functions and outsourced support services, like maintenance, above all to decrease costs. This new phenomenon has led to increasing formation of business networks. As a result, a growing need for new kinds of tools for managing these networks effectively has arisen. Maintenance costs are usually a notable part of the life-cycle costs of an item, and it is important to be able to plan the future maintenance operations for the strategic period of the company or for the whole life-cycle period of the item. This thesis introduces an itemlevel life-cycle model (LCM) for industrial maintenance networks. The term item is used as a common definition for a part, a component, a piece of equipment etc. The constructed LCM is a working tool for a maintenance network (consisting of customer companies that buy maintenance services and various supplier companies). Each network member is able to input their own cost and profit data related to the maintenance services of one item. As a result, the model calculates the net present values of maintenance costs and profits and presents them from the points of view of all the network members. The thesis indicates that previous LCMs for calculating maintenance costs have often been very case-specific, suitable only for the item in question, and they have also been constructed for the needs of a single company, without the network perspective. The developed LCM is a proper tool for the decision making of maintenance services in the network environment; it enables analysing the past and making scenarios for the future, and offers choices between alternative maintenance operations. The LCM is also suitable for small companies in building active networks to offer outsourcing services for large companies. The research introduces also a five-step constructing process for designing a life-cycle costing model in the network environment. This five-step designing process defines model components and structure throughout the iteration and exploitation of user feedback. The same method can be followed to develop other models. The thesis contributes to the literature of value and value elements of maintenance services. It examines the value of maintenance services from the perspective of different maintenance network members and presents established value element lists for the customer and the service provider. These value element lists enable making value visible in the maintenance operations of a networked business. The LCM added with value thinking promotes the notion of maintenance from a “cost maker” towards a “value creator”.

Improving productivity by developing knowledge management practices for a consulting company

The objective of the research was to identify knowledge conversion states in consultancy sales and delivery processes for the company’s one business unit, to know where to store certain types of information and knowledge, and to create best practices for the company’s knowledge management activities in the selected business processes. The used research methodology was action research. The current business processes were analyzed by interviewing people involved in them. The results were documented and catego- rized, and based on them the target states of the processes were developed. Knowledge man- agement activities were integrated to the business processes. The main findings of the research were that roles and responsibilities in the processes were not clear to people, information systems did not fully support individuals and time was wasted searching for information and knowledge. There were also many variations of how the processes actually realized, which affected the overall quality of the process. The conclusions of the research were that knowledge management activities should be high- lighted in businesses where knowledge workers are the main assets of the company. Knowledge management practices can be supported by company culture, leadership and in- formation systems. However, one main factor is each individual’s willingness to share knowledge. By integrating knowledge management activities to business processes and hav- ing information systems supporting knowledge management, individual productivity can be improved.

How Is Credit Risk Estimated? Discussion and Evidence based on Cross-Industry Sample Utilizing the KMV Model

The purpose of this thesis is to focus on credit risk estimation. Different credit risk estimation methods and characteristics of credit risk are discussed. The study is twofold, including an interview of a credit risk specialist and a quantitative section. Quantitative section applies the KMV model to estimate credit risk of 12 sample companies from three different industries: automobile, banking and financial sector and technology. Timeframe of the estimation is one year. On the basis of the KMV model and the interview, implications for analysis of credit risk are discussed. The KMV model yields consistent results with the existing credit ratings. However, banking and financial sector requires calibration of the model due to high leverage of the industry. Credit risk is considerably driven by leverage, value and volatility of assets. Credit risk models produce useful information on credit worthiness of a business. Yet, quantitative models often require qualitative support in the decision-making situation.

PERFORMANCE ANALYSIS OF A TACTICAL ASSET ALLOCATION – Evidence from the Black–Litterman model based fixed income portfolio

Over time the demand for quantitative portfolio management has increased among financial institutions but there is still a lack of practical tools. In 2008 EDHEC Risk and Asset Management Research Centre conducted a survey of European investment practices. It revealed that the majority of asset or fund management companies, pension funds and institutional investors do not use more sophisticated models to compensate the flaws of the Markowitz mean-variance portfolio optimization. Furthermore, tactical asset allocation managers employ a variety of methods to estimate return and risk of assets, but also need sophisticated portfolio management models to outperform their benchmarks. Recent development in portfolio management suggests that new innovations are slowly gaining ground, but still need to be studied carefully. This thesis tries to provide a practical tactical asset allocation (TAA) application to the Black–Litterman (B–L) approach and unbiased evaluation of B–L models’ qualities. Mean-variance framework, issues related to asset allocation decisions and return forecasting are examined carefully to uncover issues effecting active portfolio management. European fixed income data is employed in an empirical study that tries to reveal whether a B–L model based TAA portfolio is able outperform its strategic benchmark. The tactical asset allocation utilizes Vector Autoregressive (VAR) model to create return forecasts from lagged values of asset classes as well as economic variables. Sample data (31.12.1999–31.12.2012) is divided into two. In-sample data is used for calibrating a strategic portfolio and the out-of-sample period is for testing the tactical portfolio against the strategic benchmark. Results show that B–L model based tactical asset allocation outperforms the benchmark portfolio in terms of risk-adjusted return and mean excess return. The VAR-model is able to pick up the change in investor sentiment and the B–L model adjusts portfolio weights in a controlled manner. TAA portfolio shows promise especially in moderately shifting allocation to more risky assets while market is turning bullish, but without overweighting investments with high beta. Based on findings in thesis, Black–Litterman model offers a good platform for active asset managers to quantify their views on investments and implement their strategies. B–L model shows potential and offers interesting research avenues. However, success of tactical asset allocation is still highly dependent on the quality of input estimates.

Real-time simulation of multibody systems with applications for working mobile vehicles

This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.

Developing asset management in district heating and cooling business in a large energy company

The purpose of this Master´s Thesis is to develop asset management and its practices in case company. District heating and cooling systems operated by case company around Finland, Sweden, Poland and the Baltics form an enormous-sized asset base where some parts are starting to reach their end of life-cycles. Large-sized asset renewal actions are under discussion and maintenance spending is increasing. Financially justified decisions in changing business environment are needed. Asset management is one of the most important concepts for production organization which operates with capital-intensive production assets. Organizations profitability is highly dependent on assets´ performance. Such assets, like district heating and cooling systems, should be utilized as efficiently as possible within their life-cycles but also maintained and renewed optimally. In this qualitative thesis, empirical interview study was conducted to describe the current situation on how the assets are managed in the case company and to examine the readiness to implement a new, risk-based solution. Asset management revealed to be a very well-known concept. From proposed risk-based asset management point of view, several key observations were made. It was seen as a suitable solution, but further development will be needed. Based on the need and findings, several key processes and frameworks were created and also tested with a case study. Assets` condition monitoring should be improved, which would have a positive impact on event probability assessment. Risk acceptance is also a thing to be discussed further. When the evaluation becomes fluent in single investment cases, portfolio-level expansion should be considered and started. As a result, thesis proposes a solution how risk-based asset management could be performed practically in a capital-intensive case company in order to optimize the maintenance spending in a long run. Created practical framework is made universal: similar principles can be applied into multiple cases in case company but also in other energy companies. Risk-based asset management`s benefits could be utilized best in portfolio-level optimization where the capital would be invested to the most important objects from total risk point of view. Eventually, such approach would allow case company to optimize capital spending in a situation where funds are not adequate to cover all the mandatory needs and prioritization between the investment alternatives will truly be needed.

Model to Build a Service Quality Centric Customer Reference Portfolio in a Software as a Service Company

The goal of the master’s thesis was to develop a model to build a service quality centric customer reference portfolio for a software as a service company. The case company is Meltwater Finland Oy that leverages customer references externally but there is no systematic model to produce good quality customer references that are in line with the company strategy. The project was carried out as a case study, where the primary source of information were seventeen internal interviews with the employees of the case company. The theory part focuses on customer references as assets and service quality in software as a service industry. In the empirical part the research problem is solved. As a result of the case study, the model to build a service quality centric customer reference portfolio was created and further research areas were suggested.

Liquidity Risk in the Finnish Stock Market

This study explores the pricing of liquidity risk and its effect on stock returns in the Finnish stock market. In addition to that, it investigates whether there is a trend in liquidity risk. Finally, it analyzes whether the two chosen liquidity measures provide different results. The data consists of all the common shares listed in the Finnish stock market during the period of 1/1997–7/2015. To examine whether liquidity risk affects stock returns in the Finnish stock market, this study utilizes a conditional version of liquidity-adjusted capital asset pricing model (LCAPM) by Acharya and Pedersen (2005). Two recently proposed illiquidity measures – PQS and AdjILLIQ – are used in the empirical estimation to see whether there are differences in the results between the measures. The time-varying conditional liquidity risks are estimated by using a multivariate DCC-GARCH model, while the pricing of the liquidity risk is conducted by applying fixed effect panel regression. The results imply that investors in the Finnish stock market are willing to pay a premium to hedge from wealth shocks and having liquid assets during the declined market liquidity. However, investors are not willing to pay a premium for stocks with higher returns during illiquid markets. The total annualized illiquidity premiums found in the Finnish stock market are 1.77% and 1.04%, based on the PQS and AdjILLIQ measures, respectively. The study also shows that liquidity risk does not exhibit decreasing trend, and investors should consider liquidity risk in their portfolio diversification in the Finnish stock market.

POLITICAL RISK IN FOREIGN DIRECT INVESTMENT IN THE RUSSIAN ELECTRIC POWER SECTOR

Russia approved ambitious reform plan for the electricity sector in 2001 including privatisation of the country’s huge thermal generation assets. So far the sector had suffered from power shortages, aging infrastructure, substantial electricity losses, and weak productivity and profitability numbers. There was obvious need for foreign investments and technologies. The reform was rather successful; the generation assets were privatised in auctions in 2007-2008 and three European energy companies, E.On, Enel and Fortum, invested in and obtained together over 10% of the Russian production assets. The novelty of these foreign investments serves unique object for the study. The political risk is involved in the FDI due to the industry’s social and economic importance. The research’s objective was to identify and analyse the political risk that foreign investors face in the Russian electricity sector. The research had qualitative study method and the empirical data was collected by interviewing. The research’s theoretical framework was based on the existing political risk theories and it focused to understand the Russian government in relation to the country’s stability and define both macro-level and micro-level sources of political risk for the foreign direct investments in the sector. The research concludes that the centralised and obscure political decision-making, economic constriction, high level of governmental control in economy and corruption form the country’s internal macro-level risk sources for the foreign investors in the sector. Additionally the retribution due to the companies’ home country actions, possible violent confrontations at the Russian borders and the currency instability are externally originated risk sources. In the electricity industry there is risk of tightened governmental control and increased regulation and taxation. Similarly the company-level risk sources link to the unreformed heating sector, bargaining with the authorities, diplomatic stress between host and home countries and to companies and government’s divergent perspective for the profit-making. The research stresses the foreign companies’ ability to cope with the characteristics of Russian political environment. In addition to frequent political and market risk assessment, the companies need to focus on currency protection against rouble’s rate fluctuation and actively build good company-citizenship in the country. Good relationship is needed with the Russian political authorities. The political risk identification and the research’s conclusive framework also enable political risk study assessments for other industries in Russia

International Entrepreneurship in Bottom of the Pyramid Markets – Overcoming institutional constraints

Bottom of the pyramid (BoP) markets are an underserved market of approximately four billion people living on under $5 a day in four regional areas: Africa, Asia, Eastern Europe and Latin America. According to estimations, the BoP market forms a $5 trillion global consumer market. Despite the potential of BoP markets, companies have traditionally focused on serving the markets of developed countries and ignored the large customer group at the bottom of the pyramid. The BoP approach as first developed by Prahalad and Hart in 2002 has focused on multinational corporations (MNCs), which were thought of as the ones who should take responsibility in serving the customers at the bottom of the pyramid. This study challenges this proposition and gives evidence that also smaller international new ventures – entrepreneurial firms that are international from their birth, can be successful in BoP markets. BoP markets are characterized by a number of deficiencies in the institutional environment such as strong reliance on informal sector, lack of infrastructure and lack of skilled labor. The purpose of this study is to increase the understanding of international entrepreneurship in BoP markets by analyzing how international new ventures overcome institutional constraints in BoP markets and how institutional uncertainty can be exploited by solving institutional problems. The main objective is divided into four sub objectives. • To describe the opportunities and challenges BoP markets present • To analyze the internationalization of INVs to BoP markets • To examine what kinds of strategies international entrepreneurs use to overcome institutional constraints • To explore the opportunities institutional uncertainty offers for INVs Qualitative approach was used to conduct this study and multiple-case study was chosen as a research strategy in order to allow cross-case analysis. The empirical data was collected through four interviews with the companies Fuzu, Mifuko, Palmroth Consulting and Sibesonke. The results indicated that understanding of the wider institutional environment improves the survival prospects of INVs in BoP markets and that it is indeed possible to exploit institutional uncertainty by solving institutional problems. The main findings were that first-hand experience of the markets and grassroots levels of information are the best assets in internationalization to BoP markets. This study highlights that international entrepreneurs with limited resources can improve the lives of people at the BoP with their business operations and act as small-scale institutional entrepreneurs contributing to the development of the institutional environment of BoP markets.

Suorituskyvyn johtamisen ja mittaamisen kehittäminen suuren yrityksen tutkimus- ja tuotekehitystoiminnassa

Tässä tutkimuksessa selvitettiin, miten suorituskyvyn johtamista ja mittaamista käytännössä toteutettiin suuressa tutkimus- ja tuotekehitystoimintaa Suomessa harjoittavassa elintarvikealan yrityksessä. Tutkimuksessa kartoitettiin tärkeimpiä suorituskykyyn vaikuttavia tekijöitä suorituskyvyn johtamisen ja mittaamisen näkökulmasta. Tutkimuksen tavoitteena oli saada kooste suosituksista tutkimus- ja tuotekehitystoiminnan suorituskyvyn johtamisen ja mittaamisen kehittämiseksi. Tutkimuksen laajuus rajattiin neljään case-yritykseen. Tutkimuksessa tehtiin empiirinen puolistrukturoitu kyselytutkimus, strukturoidut haastattelut sekä tulosten arviointi. Tutkimusote oli lähinnä toiminta-analyyttinen, koska tutkimuksessa käsiteltiin organisaation toimintaa, johtamista, ongelmanratkaisua, päätöksentekoprosesseja sekä kehitys- ja muutosprosesseja. Tutkimustulosten perusteella suorituskyvyn johtamista ja mittaamista case-yrityksissä toteutettiin BSC:n yleisten näkökulmien mukaisesti. Tutkimus- ja tuotekehitystoiminnan mittauksen tavoitteet poikkesivat toisistaan niiden toiminnan luonteesta johtuen. Tutkimustoiminnassa suorituskyvyn mittauksen tavoitteet painottuivat lähinnä innovatiivisuuteen, oppimiseen ja motivointiin. Tuotekehitystoiminnassa mittauksen tavoitteet olivat enemmän diagnostisia. Tuotekehitystoiminnassa tavoitteena olivat projektien seurantaan, toiminnan tulostenarviointiin, talouteen sekä koordinaatioon ja kommunikointiin liittyvät tekijät. Tutkimustulosten perusteella puutteita havaittiin suorituskyvyn viestinnän riittävyydessä ja vaikuttavuudessa, mittaustiedon hyödynnettävyydessä, aineettoman pääoman mittauksessa, projektien arviointikriteerien viestinnässä, prosessien selkeydessä ja toimivuudessa, projektiosaamisessa, suorituskyvyn mittauksessa, vaikutusmahdollisuuksissa, johtamisessa ja esimiestyössä.