RF disturbances produced by high-power photovoltaic solar plants

In this thesis, analysis of electromagnetic compatibility of high-power photovoltaic solar plant is made. Current standards suitable for photovoltaic applications are given. Measurements of antenna factor for experimental setup are shown. Also, measurements of common mode disturbance voltages in high-power solar plant are given. Importance of DC-side filter is shown. In the last part of the work, electromagnetic simulations are made. These simulations show influence of several factors to EMC of power plant. Based on these simulations and measurements recommendations are given.

Design of marine generators for alternative diesel-electric power systems

This study compares different electric propulsion systems. Results of the analysis of all the advantages and disadvantages of the different propulsion systems are given. This thesis estimates possibilities to apply different diesel-electric propulsion concepts for different vessel types. Small and medium size vessel’s power ranges are studied. The optimal delivery system is chosen. This choice is made on the base of detailed study of the concepts, electrical equipment market and comparison of mass, volume and efficiency parameters. In this thesis three marine generators are designed. They are: salient pole synchronous generator and two permanent magnet synchronous generators. Their electrical, dimensional, cost and efficiency parameters are compared. To understand all the benefits diagrams with these parameters are prepared. Possible benefits and money savings are estimated. As the result the advantages, disadvantages and boundary conditions for the permanent magnet synchronous generator application in marine electric-power systems are found out.

Economics of combined power plant and pyrolysis bio-oil production

There are reasons of necessity in bio-fuel use and bio-energy fast development. It includes the material about bio-energy technologies, applications and methods. There are basic thermodynamics and economic theories. The economic calculation presents the comparison between two combinations. There are boiler plant below 20 MW in combination with ablative pyrolysis plant for bio-oil production and CHP plant below 100 MW in combination with the RTP pyrolysis bio-oil production technology. It provides a material about wood chips and bio-oil characteristics and explains it nature, presents the situation around the bio-fuel market or bio-fuel trade. There is a description of pyrolysis technologies such as ablative and RTP. The liquid product of the pyrolysis processes is bio-oil. The bio-oil could be different even of the same production process, because of the raw material nature and characteristics. The calculation shows advantages and weaknesses of combinations and obtained a proof of suppositions. The next thing, proven by this work is the fact that to get more efficiency from energy project it is good possibility to built plants in combinations.

Russian market entry decision for an e-business company, the case Ampparit Inc.

The aim of the study was to examine foreign operation methods and suggest the entry mode for the Russian E-business market. Ampparit Inc. was chosen as a case company, as it operates in the e-commerce B2B type of the business by providing Witpik - media monitoring service. The concept of foreign operation method was clarified with a specific focus on Russian market peculiarities and E-business. The main focuses of the present work were to figure out the most applicable entry mode for the Russian market in case of e-business company and factors affecting the decision about entry, including risks, barriers and other aspects.

Sales performance measurement and steering in a multinational company

The objective of the study is to find out how sales performance should be measured and how should sales be steered in a multinational company. The beginning of the study concentrates on the literature regarding sales, performance measurement, sales performance measurement, and sales steering. The empirical part of the study is a case study, in which the information was acquired from interviews with the key personnel of the company. The results of the interviews and the revealed problems were analyzed, and comparison for possible solutions was performed. When measuring sales performance, it is important to discover the specific needs and objectives for such a system. Specific needs should be highlighted in the design of the system. The system should be versatile and the structure of the system should be in line with the organizational structure. The role of the sales performance measurement system was seen to be important in helping sales steering. However, the importance of personal management and especially conversations were seen as really critical issue in the steering. Sales performance measurement could be based on the following perspectives: financial, market, customer, people, and future. That way the sales department could react to the environmental changes more rapidly.

IT Financial Management In a Large Industrial Company

IT Service Management plays a key role in many IT organizations today. First IT Service Management principles founded in the early 1980s but the real adaption emerged in the end 2000s. IT Financial Management is one of IT Service Management’s processes. The main purpose of this thesis was study how IT Financial Management approach can be improved in a case company. Budgeting, accounting and charging are IT Financial Management functions. These functions are researched in this thesis. Thesis materials consist of both qualitative and quantitative material. The theoretical part consists mostly of IT Service Management literature while interviews and the case company’s information systems are researched in the empirical part. Thesis also reviews different kind of the systems which supports and automates IT Financial Management functions. The biggest challenge is the cost allocation with the current ERP system in the case company. It is worth to take group based system for allocation in use before there is a holistic system in a market. The case company should also develop its IT service processes forward.

Applying organizational core values in everyday delivery work - case Accenture

The purpose of this thesis is to study organizational core values and their application in practice. With the help of literature, the thesis discusses the implementation of core values and the benefits that companies can gain by doing it successfully. Also, ways in which companies can improve their values’ application to their everyday work are presented. The case company’s value implementation is evaluated through a survey research conducted on their employees. The true power of values lies in their application, and therefore, core values should be the basis for all organizational behavior, integrated into everything a company does. Applying values in practice is an ongoing process and companies should continuously work towards creating a more value-based organizational culture. If a company does this effectively, they will most likely become more successful with stakeholders as well as financially. Companies looking to turn their values into actions should start with a self-assessment. Employee surveys are effective in assessing the current level of value implementation, since employees have valuable, first-hand information regarding the situations and behaviors they face in their everyday work. After the self-assessment, things like management commitment, communication, training, and support are key success factors in value implementation.

Absorptive capacity of Multinational Corporation’s parent company

The objective of this paper is to contribute to the literature concerning absorptive capacity by revealing the factors affecting the absorptive capacity of MNC parent company toward subsidiary and most particularly the effects of intra-organizational antecedents. The theoretical framework is build around previous findings on knowledge sharing and absorptive capacity. The empirical part of the study is a qualitative research which includes in-depth interviews and analysis of secondary data based on a single case company. The results showed that organizational structure, internal communication, informal networks, formal networks, internationalization, human resources management, shared language, meetings, trust, participation in decision-making, level of awareness, IT system, level of adaptation to market specifications and job rotation influence parent company’s absorptive capacity. Moreover, related problems to these antecedents have been identified. Additionally, recommendations to solve these problems are formulated. In the end, directions for future research on this topic are given.

Konventionaalisen jätehuollon kehittäminen Loviisan voimalaitoksella

Tämän diplomityön tarkoituksena oli löytää kehityskohteita Fortumin Loviisan ydinvoimalaitoksen konventionaalisesta, eli tavanomaisesta, jätehuollosta. Tavoitteena oli löytää erityisesti keinoja kaatopaikkajätteen määrän vähentämiseksi sekä lajittelun tehostamiseksi. Myös jätelainsäädännön kokonaisuudistuksen vaikutukset jätehuollon toimintaan olivat työn kannalta keskeisessä roolissa. Työ tehtiin jätehuoltosuunnitelman rakennetta noudattaen. Jätehuoltosuunnitelma koostuu alkukartoituksesta sekä jätehuoltosuunnitelman laatimisesta ja toteutuksesta. Varsinaisina kehitystarpeiden kartoittamismenetelminä käytettiin viranomaisvaatimusten selvittämistä, toiminnan tarkastelua, jätehuoltokyselyä voimalaitoksen työntekijöille, benchmarkingia sekä valittujen hyötykäyttö- ja loppusijoitusmenetelmien kustannusvertailua. Tulokseksi saatiin, että jätteiden lajittelua voitaisiin tehostaa ennen kaikkea lisäämällä työntekijöiden koulutusta. Lajittelun helpottamiseksi ohjeistuksen tulee olla paremmin saatavilla sekä voimalaitoksen omalle henkilöstölle kuin urakoitsijoillekin. Ongelmajätehuollossa eniten ongelmia ilmeni ongelmajätepakkausten merkitsemisessä jätteiden syntypaikoilla. Tähän ratkaisuna ehdotettiin kokeiltavaksi jätteiden syntykohteisiin sijoitettavia jätekortteja, joista pakkaajat voisivat helposti tarkistaa tarvittavat merkinnät. Myös mustan jäteöljyn keräämistä olisi mahdollista parantaa, jotta suurempi osa siitä saataisiin hyödynnettyä materiaalina. Kaatopaikkajätteen määrän vähentämiseksi työssä ehdotettiin sekajätteen viemistä kaatopaikan sijaan poltettavaksi. Muutoksen seurauksena voimalaitoksen jätehuollon kustannukset saattavat lisääntyä, mutta ympäristön kannalta muutos tulisi olemaan positiivinen.

Intellectual Property Management in a Small Company

Opinnäytetyö keskittyi kriittisiin tapahtumiin, joita on tullut yhtiön tai sen edeltävän yhtiön, joka oli Mobile Screen TV – 4 ALL, tekemien aikaisempien patenttihakemusten yhteydessä . Tutkimus vertasi ja evaluoi yhtiön aikaisemmin tekemien keksintöjen suojausta. Toisaalta opinnäytetyön päämäärä oli tutkia ja selvittää monitapaus-menetelmällä yhtiön aikaisempia keksintöjä ja miten aineettoman oikeuden suojaus toteutui prosessien eri vaiheissa. Tämä päättötyötutkielma vei loppuun asti erittäin suuren patenttien ja hyödyllisyysmallien hakemusten tutkimuksen. LH Communications Oy on tehnyt monia niistä, mutta tutkimus sisälsi myös joitakin kilpailijoiden hakemuksia. Tässä tutkimuksessa oli kaksi pääkysymystä. Miten pieni yhtiö voisi suojella heidän uusia ideoitaan ja keksintöjään ja myös samalla pitää yhtiön talouden hyvällä tasolla. Tämä tutkimus käytti The Critical Incidents Technique (CIT), joka keskittyy kriittisiin tapahtumiin, selvittääkseen sopivia menetelmiä pienelle yhtiölle siitä, miten suojella uusia ajatuksia, ideoita ja keksintöjä ja samanaikaisesti olla tuottava niiden kanssa. Tutkimuksemme käsitteli kaikenlaisia tarvittavia käytäntöjä pienessä yhtiössä ja päähuomio pienessä yhtiössä tulee olla omien keksintöjen suojaamisessa. Paras suojaus on tehdä patentteja, mutta se tulee maksamaan hyvin paljon koko tapahtumasarjan aikana.

Optimal trading of wind power in the short term market

The energy reform, which is happening all over the world, is caused by the common concern of the future of the humankind in our shared planet. In order to keep the effects of the global warming inside of a certain limit, the use of fossil fuels must be reduced. The marginal costs of the renewable sources, RES are quite high, since they are new technology. In order to induce the implementation of RES to the power grid and lower the marginal costs, subsidies were developed in order to make the use of RES more profitable. From the RES perspective the current market is developed to favor conventional generation, which mainly uses fossil fuels. Intermittent generation, like wind power, is penalized in the electricity market since it is intermittent and thus diffi-cult to control. Therefore, the need of regulation and thus the regulation costs to the producer differ, depending on what kind of generation market participant owns. In this thesis it is studied if there is a way for market participant, who has wind power to use the special characteristics of electricity market Nord Pool and thus reach the gap between conventional generation and the intermittent generation only by placing bids to the market. Thus, an optimal bid is introduced, which purpose is to minimize the regulation costs and thus lower the marginal costs of wind power. In order to make real life simulations in Nord Pool, a wind power forecast model was created. The simulations were done in years 2009 and 2010 by using a real wind power data provided by Hyötytuuli, market data from Nord Pool and wind forecast data provided by Finnish Meteorological Institute. The optimal bid needs probability intervals and therefore the methodology to create probability distributions is introduced in this thesis. In the end of the thesis it is shown that the optimal bidding improves the position of wind power producer in the electricity market.