Innovative manufacturing process for hybrid pultruded products based on cork and polymeric pre-shapes

Pultruded products are being targeted by a growing demand due to its excellent mechanical properties and low chemical reactivity, ensuring a low level of maintenance operations and allowing an easier assembly operation process than equivalent steel bars. In order to improve the mechanical drawing process and solve some acoustic and thermal insulation problems, pultruded pipes of glass fibre reinforced plastics (GFRF) can be filled with special products that increase their performance regarding the issues previously referred. The great challenge of this work was drawing a new equipment able to produce pultruded pipes filled with cork or polymeric pre-shaped bars as a continuous process. The project was carried out successfully and the new equipment was built and integrated in the pultrusion equipment already existing, allowing to obtain news products with higher added-value in the market, covering some needs previously identified in the field of civil construction.

Estudo do processo de fabricação de perfis híbridos pultrudidos

A realização deste trabalho teve como principal objectivo proceder ao projecto e realização de dois sistemas de produção de perfis pultrudidos híbridos a acoplar aos equipamentos de pultrusão já instalados na ALTO – PERFIS PULTRUDIDOS, Lda. A realização de perfis pultrudidos híbridos visa melhorar as características de isolamento térmico e acústico dos tubos habitualmente feitos por pultrusão, incrementando simultaneamente a sua resistência, através da melhoria do momento de inércia do perfil, sem que haja um aumento significativo do peso do conjunto. O projecto teve como base de trabalho dois sistemas de produção completamente distintos: (a) a existência de barras de cortiça e de poliuretano (pré-formas) sobre as quais se vai efectuar a pultrusão de um tubo que abraça as barras e (b) o uso de resíduos de pultrusão como forma de enchimento dos tubos, durante o seu processo produtivo. Estes equipamentos foram projectados e parcialmente fabricados, antevendo-se que os mesmos entrem em funcionamento muito brevemente.

Conceção e implementação de um programa de melhoria da qualidade: estudo de caso na Eurico Ferreira, S.A.

Os programas de melhoria contínua dos processos são cada vez mais a aposta das empresas para fazer face ao mercado. Através da implementação destes programas é possível conferir simplicidade e padronização aos processos e consequentemente reduzir os custos com desperdícios internos relacionados com a qualidade dos mesmos. As ferramentas de melhoria da qualidade e as ferramentas associadas ao Lean Thinking representam um pilar importante no sucesso de qualquer programa de melhoria contínua dos processos. Estas ferramentas constituem meios úteis na análise, controlo, organização de dados importantes para a correta tomada de decisão nas organizações. O presente projeto tem como principal objetivo a conceção e implementação de um programa de melhoria da qualidade na Eurico Ferreira, S.A., tendo por base a avaliação da satisfação do cliente e a aplicação dos 5S. Neste contexto, o trabalho teve como fundamentação teórica a Gestão da Qualidade, Lean Thinking e algumas ferramentas de ambas as matérias. Posteriormente foi selecionada a área de negócio da empresa a abordar. Após a seleção, realizou-se um diagnóstico inicial do processo identificando os diversos pontos de melhoria onde foram aplicadas algumas ferramentas do Lean Thinking, nomeadamente o Value Stream Mapping e a metodologia 5S. Com a primeira foi possível construir um mapa do estado atual do processo, no qual estavam representados todos os intervenientes assim como o fluxo de materiais e de informação ao longo do processo. A metodologia 5S permitiu atuar sobre os desperdícios, identificando e implementando diversas melhorias no processo. Concluiu-se que a implementação das ferramentas contribuiu eficientemente para a melhoria contínua da qualidade nos processos, tendo sido decisão da coordenação alargar o âmbito do projeto aos restantes armazéns do centro logístico da empresa. Pode afirmar-se com recurso à satisfação do cliente expressa através da evolução favorável do Service-level agreement que as ferramentas implementadas têm gerado resultados muito positivos no curto prazo.

Análise e optimização de processos numa empresa do sector automóvel

Trabalho de Projeto

"Participação, um Caminho para a Mudança" Projeto desenvolvido com pessoas com doença renal crónica e cuidadores

O presente relatório reflete a (co)construção e desenvolvimento do projeto de educação e intervenção social “Participação, um Caminho para a Mudança”, que teve como palco a Caledial, uma clínica de hemodiálise em Canelas – Vila Nova de Gaia. Posicionado na metodologia da Investigação-Ação Participativa, este projeto permitiu a criação de espaços coletivos de partilha de experiências e vivências de pessoas com doença crónica, reconhecendo dificuldades e limitações, mas também as potencialidades e recursos existentes. Assim, pelo caminho da participação e da ação, procurou-se dar resposta a algumas das necessidades sentidas, promovendo um cada vez maior envolvimento das pessoas na procura do conhecimento sobre esta doença, no sentido da sua capacitação e empowerment. Teve como ponto de partida o primeiro convívio de Natal das pessoas em hemodiálise, familiares e profissionais da Caledial, e vários grupos de discussão sobre as vivências, perceções e sentimentos face à doença renal crónica. No âmbito deste projeto, resultado do trabalho coletivo de vários participantes, pretendeu-se compreender a realidade enquanto se agia sobre a mesma, num processo contínuo de reflexão-ação-reflexão, que foi capaz de mobilizar esforços individuais e coletivos no sentido da mudança. Surgiu como um desafio e afirmou-se como um dispositivo transformador das relações entre os profissionais de saúde, as pessoas em hemodiálise e as famílias, transformando a clínica num espaço mais aberto e inclusivo, promotor da participação e fértil para o desenvolver de atividades repletas de significado para as pessoas envolvidas.

Control of baker’s yeast fermentation: PID and fuzzy algorithms

A MATLAB/SIMULINK-based simulator was employed for studies concerning the control of baker’s yeast fed-batch fermentation. Four control algorithms were implemented and compared: the classical PID control, two discrete versions- modified velocity and position algorithms, and a fuzzy law. The simulation package was seen to be an efficient tool for the simulation and tests of control strategies of the nonlinear process.

Optimization of the Pultrusion process

Manufacturing processes need permanently to innovate and optimize because any can be susceptible to continuous improvement. Innovation and commitment to the development of these new solutions resulting from existing expertise and the continuing need to increase productivity, flexibility and ensuring the necessary quality of the manufactured products. To increase flexibility, it is necessary to significantly reduce set-up times and lead time in order to ensure the delivery of products ever faster. This objective can be achieved through a normalization of the pultrusion line elements. Implicitly, there is an increase of productivity by this way. This work is intended to optimize the pultrusion process of structural profiles. We consider all elements of the system from the storehouse of the fibers (rack) to the pultrusion die. Particular attention was devoted to (a) the guidance system of the fibers and webs, (b) the resin container where the fibers are impregnated, (c) standard plates positioning of the fibers towards the entrance to the spinneret and also (d) reviewed the whole process of assembling and fixing the die as well as its the heating system. With the implementation of these new systems was achieved a significant saving of time set-up and were clearly reduced the unit costs of production. Quality assurance was also increased.

Innovation through virtual communities of Practice: motivation and constraints in the knowledge-creation process

Communities of Practice are places which provide a sound basis for organizational learning, enabling knowledge creation and acquisition thus improving organizational performance, leveraging innovation and consequently increasing competitively. Virtual Communities of Practice (VCoP‟s) can perform a central role in promoting communication and collaboration between members who are dispersed in both time and space. The ongoing case study, described here, aims to identify both the motivations and the constraints that members of an organization experience when taking part in the knowledge creating processes of the VCoP‟s to which they belong. Based on a literature review, we have identified several factors that influence such processes; they will be used to analyse the results of interviews carried out with the leaders of VCoP‟s in four multinationals. As future work, a questionnaire will be developed and administered to the other members of these VCoP‟s

Educational characteristics of adult students in portuguese technological schools

Despite a massive expansion of education in Portugal, since the 1970’s, educational attainment of the adult population in the country remains low. The numbers of working-age people in some form of continuing education are among the lowest, according to the OECD and EU-27 statistics. Technological Schools(TS), initially created in the 1990’s, under the umbrella of the Ministry of Economy in partnership with industry and industrial associations, aimed to prepare qualified staff for industries and services in the country, particularly in the engineering sector, through the provision of post secondary non-university programmes of studies, the CET (Technological Specialization Courses). Successful CET students are awarded a DET(Diploma of Technological Specialization), which corresponds to Vocational Qualification level IV of the EU, according to the latest alteration (2005) of the Education Systems Act (introduced in 1986). In this, CET’s are also clearly defined as one of the routes for access to Higher Education (HE), in Portugal. The PRILHE (Promoting Reflective and Independent Learning in Higher Education) multinational project, funded by the European Socrates Grundtvig Programme, aimed to identify the learning processes which enable adult students in higher education to become autonomous reflective learners and search best practices to support these learning processes. During this research, both quantitative and qualitative methods were used to determine how students organise their studies and develop their learning skills. The Portuguese partner in the project’ consortium used a two case studies approach, one with students of Higher Education Institutions and other with students of TS. This paper only applies to students of TS, as these have a predominant bias towards engineering. Results show that student motivation and professional teaching support contribute equally to the development of an autonomous and reflective approach to learning in adult students; this is essential for success in a knowledge economy, where lifelong learning is the key to continuous employment.

Towards a knowledge-based society: the need for a continuous lifelong

IRMA International Conference under the theme Managing Worldwide Operations and Communications with Information Technology, May 19-23, Vancouver, British Columbia, Canada

A Implementação de um sistema de gestão da qualidadena Junta de Freguesia de Gandra

Trabalho de Projeto apresentado ao Instituto Superior de Contabilidade e Administração do Porto para obtenção do grau de Mestre em Auditoria Orientado por: Doutora Alcina Augusta de Sena Portugal Dias

Fatores influenciadores da gestão da qualidade e independência do auditor: um estudo de caso

Dissertação apresentada ao Instituto Superior de Contabilidade para obtenção do Grau de Mestre em Auditoria Orientada por: Doutora Alcina Dias

International mobility in the Pharmacy degree at the school of allied health sciences of Oporto

Background: The Erasmus program is a subprogram of the Lifelong Learning program, exclusive for Higher Education that promotes (among other initiatives), the mobility of students(studies, training or internships). The mobility of students of higher education seeks to improve the quality and development of future professionals, providing a multidisciplinary and multicultural experience. Setting: Academic Pharmacy/Pharmacy Technicians Methods: We conducted a descriptive and transversal study on the implementation of the mobility program and analyze the results, which involved applying a survey to students. Results: Since 2009/2010, the Pharmacy Degree at ESTSP has established 7 SMs protocols resulting in an average mobility of 5 students IN and 7 Students OUT. We have also endeavoured in SMp Protocols for extracurricular training with an average of 3 students OUT. The application process is normally open during the year before the mobility period. For most of the students involved, this was a first time opportunity to be in a foreign country and more than 70% choose the mobility program because it is seen as a possibility to improve their curriculum, for personal development or even to pursue employment opportunities abroad. The mobility for teachers is also encouraged. Conclusions: The exchange of experiences and training, acquired during cooperation activities should be an element of continuous dynamics and institutional affirmation. Initiatives such as the ERASMUS Program contribute to the educational and scientific enrichment, and promote international competitiveness among Higher Education Institutions.

Optimização dos parâmetros de um robô hexápode através de algoritmos genéticos

Mestrado em Engenharia Electrotécnica e de Computadores

Eficiência energética e a queima de combustíveis limpos

Mestrado em Engenharia Química