72 resultados para Cooperative Cardiovascular Project
Resumo:
8th International Workshop on Multiple Access Communications (MACOM2015), Helsinki, Finland.
Resumo:
Poster presented in Redes de Veiculos nas sociedades do futuro (RVSF 2015). 3, Jun, 2015. Castelo Branco, Portugal.
Resumo:
Currently the world around us "reboots" every minute and “staying at the forefront” seems to be a very arduous task. The continuous and “speeded” progress of society requires, from all the actors, a dynamic and efficient attitude both in terms progress monitoring and moving adaptation. With regard to education, no matter how updated we are in relation to the contents, the didactic strategies and technological resources, we are inevitably compelled to adapt to new paradigms and rethink the traditional teaching methods. It is in this context that the contribution of e-learning platforms arises. Here teachers and students have at their disposal new ways to enhance the teaching and learning process, and these platforms are seen, at the present time, as significant virtual teaching and learning supporting environments. This paper presents a Project and attempts to illustrate the potential that new technologies present as a “backing” tool in different stages of teaching and learning at different levels and areas of knowledge, particularly in Mathematics. We intend to promote a constructive discussion moment, exposing our actual perception - that the use of the Learning Management System Moodle, by Higher Education teachers, as supplementary teaching-learning environment for virtual classroom sessions can contribute for greater efficiency and effectiveness of teaching practice and to improve student achievement. Regarding the Learning analytics experience we will present a few results obtained with some assessment Learning Analytics tools, where we profoundly felt that the assessment of students’ performance in online learning environments is a challenging and demanding task.
Resumo:
Target tracking with bearing-only sensors is a challenging problem when the target moves dynamically in complex scenarios. Besides the partial observability of such sensors, they have limited field of views, occlusions can occur, etc. In those cases, cooperative approaches with multiple tracking robots are interesting, but the different sources of uncertain information need to be considered appropriately in order to achieve better estimates. Even though there exist probabilistic filters that can estimate the position of a target dealing with incertainties, bearing-only measurements bring usually additional problems with initialization and data association. In this paper, we propose a multi-robot triangulation method with a dynamic baseline that can triangulate bearing-only measurements in a probabilistic manner to produce 3D observations. This method is combined with a decentralized stochastic filter and used to tackle those initialization and data association issues. The approach is validated with simulations and field experiments where a team of aerial and ground robots with cameras track a dynamic target.
Resumo:
13th International Conference on Autonomous Robot Systems (Robotica), 2013
Resumo:
In this paper we introduce a formation control loop that maximizes the performance of the cooperative perception of a tracked target by a team of mobile robots, while maintaining the team in formation, with a dynamically adjustable geometry which is a function of the quality of the target perception by the team. In the formation control loop, the controller module is a distributed non-linear model predictive controller and the estimator module fuses local estimates of the target state, obtained by a particle filter at each robot. The two modules and their integration are described in detail, including a real-time database associated to a wireless communication protocol that facilitates the exchange of state data while reducing collisions among team members. Simulation and real robot results for indoor and outdoor teams of different robots are presented. The results highlight how our method successfully enables a team of homogeneous robots to minimize the total uncertainty of the tracked target cooperative estimate while complying with performance criteria such as keeping a pre-set distance between the teammates and the target, avoiding collisions with teammates and/or surrounding obstacles.
Resumo:
4th International Conference, SIMPAR 2014, Bergamo, Italy, October 20-23, 2014
Resumo:
The paper presents a multi-robot cooperative framework to estimate the 3D position of dynamic targets, based on bearing-only vision measurements. The uncertainty of the observation provided by each robot equipped with a bearing-only vision system is effectively addressed for cooperative triangulation purposes by weighing the contribution of each monocular bearing ray in a probabilistic manner. The envisioned framework is evaluated in an outdoor scenario with a team of heterogeneous robots composed of an Unmanned Ground and Aerial Vehicle.
Resumo:
Desde o primeiro momento, este projeto procurou libertar-se dos cenários tradicionais em que a aprendizagem era encarada como uma atividade solitária e individual; ao longo do processo, cada aluno encontrava-se sozinho perante a tarefa, sob olhar atento do professor (tais posturas eram próprias de uma cultura autoritária e pouco solidária na apropriação do saber). Decorrente dessa vontade de alterar formas de atuação, este projeto assentou os seus pressupostos teóricos na teoria em espiral de Bruner e na teoria das inteligências múltiplas de Gardner. Assim, o aluno é sempre encarado como um ser em desenvolvimento, razão pela qual urge ter uma visão holística e integrada desse desenvolvimento. Como tal, associada a estas teorias aparece a aprendizagem cooperativa e, consequentemente, o conceito de Zona de Desenvolvimento Proximal de Vygotsky e a integração curricular diretamente ligada à metodologia de projeto defendida por autores como Dewey e Kilpatrik, pontos basilares de todo este estudo. Tal como o próprio nome do projeto indica Possibilidades de desenvolvimento integrado pela Expressão Musical: Uma experiência no 1.º CEB, o objetivo principal é investigar as possibilidades de desenvolvimento global do aluno, com a interligação dos vários saberes que lhe permitam construir o seu conhecimento de uma forma integrada, tendo como ponto de partida a expressão musical. Desde a elaboração das planificações, passando pelas atividades desenvolvidas ao longo das aulas, houve sempre a preocupação em promover a participação ativa dos alunos e, como é evidente pelos mapas de conceitos, privilegiar a integração curricular bem como o desenvolvimento global dos alunos. Os dados obtidos através da entrevista efetuada aos alunos e do inquérito final demonstram o reconhecimento, por parte dos alunos, da expressão musical como uma mais3 valia para a sua aprendizagem nas diversas disciplinas, bem como a sua preferência pelo trabalho cooperativo.
Resumo:
Viva@Mat is a project developed by four Math teachers from the School of Industrial Studies and Management (ESEIG) that was born with the fundamental objective of engaging ESEIG students with different math backgrounds in Math challenging activities. Some of these activities were transformed into real palpable materials and others into small interactive ones, being the great majority of them proposed by ESEIG’ students themselves. This small project rapidly grew into something we didn’t expect – it did flow over the walls of our institution to the general involving community – specifically to pre-university schools through the Viva@Math Exhibits – Orange, Blue and Green (the fourth, the Purple one is still in development). Nowadays, Viva@Math Exhibits – the public face of the Project – are itinerant and have been travelling between several, and different institutions (pre-university schools, preparatory schools, libraries, among others), around ESEIG and IPP area of influence and having registered visitors/participants of all ages. In this article we will describe the Viva@Math Project, its different activities that are categorized in some “great groups” like Numerical Trivia, Logic Activities and Mental Calculation, Puzzles, Geometric Curiosities, Magic Tricks, among others, designed to challenge students to use the underlying logical-mathematical reasoning to any ordinary and everyday activity. We will give specific and concrete examples of some of the activities developed and, also, reproduce of the general stimulating feedback the Project receives from the enrolled “actors” (teachers, students and their relatives, institutions, among others). We feel that this Project has become a small “bridge” between the pre-university schools and Higher Education Institutions (HEI), in trying to shorten the “gap” between the institutions of different levels of education and bring them to work together.
Resumo:
A manutenção é uma área extremamente importante, principalmente na indústria. Devidamente organizada, permitirá um fluxo produtivo devidamente planeado e executado, que permitirá a qualquer empresa manter o nível de facturação desejado e o prazo de entrega acordado com os clientes. De outra forma, poderá originar o caos. No entanto, os desafios de gestão da produção mais correntes, nomeadamente através do Lean Manufacturing, passam a exigir um pouco mais do que uma simples manutenção. Torna-se obrigatório fazer análises económicas que permitam averiguar quando cada equipamento passa a exigir custos de manutenção excessivos, os quais poderão obrigar a um recondicionamento mais acentuado do equipamento, o qual pode passar inclusivamente por uma melhoria da sua performance. Nestes casos, terá que existir uma “cumplicidade” entre a Direcção de Produção e a Manutenção, no sentido de averiguar o melhor momento para proceder a uma melhoria do equipamento, numa perspectiva de funcionamento global em linha de produção, adaptando-o à performance que será exigida ao conjunto. Neste domínio, o Projecto passa a prestar um serviço valiosíssimo à empresa, integrando-se no conjunto Produção + Manutenção, criando valor na intervenção, através do desenvolvimento de um trabalho que permite não só repor o estado natural da produção, mas sim promover uma melhoria sustentada da mesma. Este trabalho pretende reflectir e avaliar a relevância do Projecto neste tipo de operações, contribuindo de uma forma sistemática e sustentada para a melhoria contínua dos processos de fabrico. É apresentado um caso de estudo que pretende validar todo o desenvolvimento anteriormente realizado na matéria.
Resumo:
This paper presents some of the results already achieved in the European project titled "Simulation for Entrepreneurship - ENTRE4FUTURE". Seven organizations from six different countries participate in this project. Organizations are from two different groups. We have a group of five educational organizations from Romania (project leader), Portugal, Spain, Austria and Denmark. The second group is constituted by two affiliates of chambers of commerce of Romania and Cyprus. The purpose of ENTRE4FUTURE is the exchange of professional experience in matters relating to teaching methodologies, with the curricula of the business simulation and the methodology used in the business simulation courses as an effective method in entrepreneurship for education among young people, the use of the innovative technologies in the business simulation courses between two levels of education - high school and university. The project had its start in 2014 and the end will be in 2016. By this time some results have already been achieved, which passed through the creation of the project website, the reports of the three meetings already held, the presentation of a new curricula for the business simulation courses and a first draft of the Good Practice Guide "Simulation for entrepreneurship".