Utilization of food industry wastes for the production of zero-valent iron nanoparticles

The proper disposal of the several types of wastes produced in industrial activities increases production costs. As a consequence, it is common to develop strategies to reuse these wastes in the same process and in different processes or to transform them for use in other processes. This work combines the needs for new synthesis methods of nanomaterials and the reduction of production cost using wastes from citrine juice (orange, lime, lemon and mandarin) to produce a new added value product, green zero-valent iron nanoparticles that can be used in several applications, including environmental remediation. The results indicate that extracts of the tested fruit wastes (peel, albedo and pulp fractions) can be used to produce zero-valent iron nanoparticles (nZVIs). This shows that these wastes can be an added value product. The resulting nZVIs had sizes ranging from 3 up to 300 nm and distinct reactivities (pulp > peel > albedo extracts). All the studied nanoparticles did not present a significant agglomeration/settling tendency when compared to similar nanoparticles, which indicates that they remain in suspension and retain their reactivity.

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Comportamento do consumidor digital: o caso do e-learning nas licenciaturas do ensino superior português

Dissertação de Mestrado apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação do professor Doutor Manuel Silva

Multicriteria decision making: a case study in the automobile industry

Multi-criteria decision analysis(MCDA) has been one of the fastest-growing areas of operations research during the last decades. The academic attention devoted to MCDA motivated the development of a great variety of approaches and methods within the field. These methods distinguish themselves in terms of procedures, theoretical assumptions and type of decision addressed. This diversity poses challenges to the process of selecting the most suited method for a specific real-world decision problem. In this paper we present a case study in a real-world decision problem arising in the painting sector of an automobile plant. We tackle the problem by resorting to the well-known AHP method and to the MCDA method proposed by Pereira and Fontes (2012) (MMASSI). By relying on two, rather than one, MCDA methods we expect to improve the confidence and robustness of the obtained results. The contributions of this paper are twofold: first, we intend to investigate the contrasts and similarities of the results obtained by distinct MCDA approaches (AHP and MMASSI); secondly, we expect to enrich the literature of the field with a real-world MCDA case study on a complex decision making problem since there is a paucity of applied research work addressing real decision problems faced by organizations.

Multicriteria decision making: a case study in the automobile industry

Multi-criteria decision analysis (MCDA) has been one of the fastest-growing areas of operations research during the last decades. The academic attention devoted to MCDA motivated the development of a great variety of approaches and methods within the field. These methods distinguish themselves in terms of procedures, theoretical assumptions and type of decision addressed. This diversity poses challenges to the process of selecting the most suited method for a specific real-world decision problem. In this paper we present a case study in a real-world decision problem arising in the painting sector of an automobile plant. We tackle the problem by resorting to the well-known AHP method and to the MCDA method proposed by Pereira and Fontes (2012) (MMASSI). By relying on two, rather than one, MCDA methods we expect to improve the confidence and robustness of the obtained results. The contributions of this paper are twofold: first, we intend to investigate the contrasts and similarities of the results obtained by distinct MCDA approaches (AHP and MMASSI); secondly, we expect to enrich the literature of the field with a real-world MCDA case study on a complex decision making problem since there is a paucity of applied research work addressing real decision problems faced by organizations.

The influence of pre-departure training on expatriate adjustment: an empirical investigation with portuguese international assignees

This chapter examines the cross-cultural influence of training on the adjustment of international assignees. We focus on the pre-departure training (PDT) before an international assignment. It is an important topic because in the globalized world of today more and more expatriations are needed. The absence of PDT may generate the failure of the expatriation experience. Companies may neglect PDT due to cost reduction practices and ignorance of the need for it. Data were collected through semi-structured interviews to 42 Portuguese international assignees and 18 organizational representatives from nine Portuguese companies. The results suggest that companies should develop PDT programs, particularly when the cultural distance to the host country is bigger and when there is no previous experience of expatriation to that country in the company. The study is original because it details in depth the methods of PDT, its problems, and consequences. Some limitations linked to the research design and detailed in the conclusion should be overcome in future studies.

Multilayer Perceptron Neural Networks Training Through Charged System Search and its Application for Non-Technical Losses Detection

The non-technical loss is not a problem with trivial solution or regional character and its minimization represents the guarantee of investments in product quality and maintenance of power systems, introduced by a competitive environment after the period of privatization in the national scene. In this paper, we show how to improve the training phase of a neural network-based classifier using a recently proposed meta-heuristic technique called Charged System Search, which is based on the interactions between electrically charged particles. The experiments were carried out in the context of non-technical loss in power distribution systems in a dataset obtained from a Brazilian electrical power company, and have demonstrated the robustness of the proposed technique against with several others natureinspired optimization techniques for training neural networks. Thus, it is possible to improve some applications on Smart Grids.

Metrologia na inspeção de componentes aeronáuticos

O presente relatório sintetiza as atividades de pesquisa e de campo desenvolvidas no estágio realizado na empresa Caetano Aeronautic, no âmbito da unidade curricular “Dissertação/Projeto/Estágio Profissional do Mestrado em Engenharia de Instrumentação e Metrologia, do Instituto Superior de Engenharia do Porto. O estágio teve como principal objetivo adquirir competências para a realização da inspeção de componentes aeronáuticos, atividade presente ao longo de todo o processo produtivo da empresa. O setor aeronáutico é um setor amplamente tecnológico e o seu Sistema de Gestão de Qualidade tem um vasto suporte documental associado. Numa primeira fase do trabalho foi feito um estudo intensivo do Sistema de Gestão da Qualidade da Caetano Aeronautic, de forma a se perceber quais os documentos inerentes ao sistema e respetivos conteúdos. Em seguida, foi necessário realizar uma análise ao fluxo produtivo da organização, para se perceber todo o processo de produção de um componente aeronáutico e documentação associada. Visto que todo o trabalho de inspeção de componentes exige conhecimentos sólidos na área da Metrologia dimensional, tornou-se fundamental consolidar competências nesta área, objetivo que foi concretizado ao longo do estágio. Com vista a contribuir para o melhoramento do processo de inspeção dos componentes aeronáuticos na empresa, foram identificados e analisados no decorrer do trabalho realizado, os problemas presentes quer ao nível da produção quer da inspeção e feitas propostas de melhoria, postas em prática sempre que possível.

Is There Sufficient Training of Health Care Staff on Noise Reduction in Neonatal Intensive Care Units? a Pilot Study From NeoNoise Project

Evidence indicates that exposure to high levels of noise adversely affects human health, and these effects are dependent upon various factors. In hospitals, there are many sources of noise, and high levels exert an impact on patients and staff, increasing both recovery time and stress, respectively. The goal of this pilot study was to develop, implement and evaluate the effectiveness of a training program (TP) on noise reduction in a Neonatal Intensive Care Units (NICU) by comparing the noise levels before and after the implementation of the program. A total of 79 health professionals participated in the study. The measurements of sound pressure levels took into account the layout of the unit and location of the main sources of noise. General results indicated that LAeq levels before implementation of the training program were often excessive, ranging from 48.7 ± 2.94 dBA to 71.7 ± 4.74 dBA, exceeding international guidelines. Similarly following implementation of the training program noise levels remained unchanged (54.5 ± 0.49 dBA to 63.9 ± 4.37 dBA), despite a decrease in some locations. There was no significant difference before and after the implementation of TP. However a significant difference was found for Lp, Cpeak, before and after training staff, suggesting greater care by healthcare professionals performing their tasks. Even recognizing that a TP is quite important to change behaviors, this needs to be considered in a broader context to effectively control noise in the NICU.

Effects of dual-task training on balance and executive functions in Parkinson's disease: A pilot study

The aim of this study was to analyze the efficacy of cognitive-motor dual-task training compared with single-task training on balance and executive functions in individuals with Parkinson's disease. Fifteen subjects, aged between 39 and 75 years old, were randomly assigned to the dual-task training group (n = 8) and single-task training group (n = 7). The training was run twice a week for 6 weeks. The single-task group received balance training and the dual-task group performed cognitive tasks simultaneously with the balance training. There were no significant differences between the two groups at baseline. After the intervention, the results for mediolateral sway with eyes closed were significantly better for the dual-task group and anteroposterior sway with eyes closed was significantly better for the single-task group. The results suggest superior outcomes for the dual-task training compared to the single-task training for static postural control, except in anteroposterior sway with eyes closed.

Industrie 4.0 Framework, Challenges and Perspectives

The world is increasingly in a global community. The rapid technological development of communication and information technologies allows the transmission of knowledge in real-time. In this context, it is imperative that the most developed countries are able to develop their own strategies to stimulate the industrial sector to keep up-to-date and being competitive in a dynamic and volatile global market so as to maintain its competitive capacities and by consequence, permits the maintenance of a pacific social state to meet the human and social needs of the nation. The path traced of competitiveness through technological differentiation in industrialization allows a wider and innovative field of research. Already we are facing a new phase of organization and industrial technology that begins to change the way we relate with the industry, society and the human interaction in the world of work in current standards. This Thesis, develop an analysis of Industrie 4.0 Framework, Challenges and Perspectives. Also, an analysis of German reality in facing to approach the future challenge in this theme, the competition expected to win in future global markets, points of domestic concerns felt in its industrial fabric household face this challenge and proposes recommendations for a more effective implementation of its own strategy. The methods of research consisted of a comprehensive review and strategically analysis of existing global literature on the topic, either directly or indirectly, in parallel with the analysis of questionnaires and data analysis performed by entities representing the industry at national and world global placement. The results found by this multilevel analysis, allowed concluding that this is a theme that is only in the beginning for construction the platform to engage the future Internet of Things in the industrial environment Industrie 4.0. This dissertation allows stimulate the need of achievements of more strategically and operational approach within the society itself as a whole to clarify the existing weaknesses in this area, so that the National Strategy can be implemented with effective approaches and planned actions for a direct training plan in a more efficiently path in education for the theme.

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Exploring the long-term associations between adolescents’ music training and academic achievement

There is a positive relationship between learning music and academic achievement, although doubts remain regarding the mechanisms underlying this association. This research analyses the academic performance of music and non-music students from seventh to ninth grade. The study controls for socioeconomic status, intelligence, motivation and prior academic achievement. Data were collected from 110 adolescents at two time points, once when the students were between 11 and 14 years old in the seventh grade, and again 3 years later. Our results show that music students perform better academically than non-music students in the seventh grade (Cohen’s d = 0.88) and in the ninth grade (Cohen’s d = 1.05). This difference is particularly evident in their scores in Portuguese language and natural science; the difference is somewhat weaker in history and geography scores, and is least pronounced in mathematics and English scores (η2 p from .09 to .21). A longitudinal analysis also revealed better academic performance by music students after controlling for prior academic achievement (η2 p = .07). Furthermore, controlling for intelligence, socioeconomic status and motivation did not eliminate the positive association between music learning from the seventh to the ninth grade and students’ academic achievement (η2 p = .06). During the period, music students maintained better and more consistent academic standing. We conclude that, after controlling for intelligence, socioeconomic status and motivation, music training is positively associated with academic achievement.

Plano estratégico “Empowering Lab ESEIG”

Os jovens ao longo do seu percurso escolar têm aspirações e expetativas elevadas quanto ao valor de empregabilidade dos diplomas a que tiveram acesso em todos os graus de ensino. Contudo, no recente contexto de crise económica, essas aspirações e expetativas socialmente nutridas pela escola e pela família têm sido em grande medida frustradas pelas crescentes dificuldades que os jovens portugueses de hoje têm vivido nos seus processos de inserção profissional. A nível individual, um jovem que passe um longo período inativo tem grandes probabilidades de sofrer de baixa autoestima, exclusão social ou de um “wage scar”, isto é, de no futuro ter um rendimento abaixo do rendimento médio de pessoas com formação e experiência equivalentes além de desenvolverem uma atitude passiva e falta de participação social, o que no longo prazo acaba por ter implicações negativas para a sociedade como um todo. Conscientes desta realidade e sabendo que as incubadoras de negócios podem transmitir confiança à comunidade financeira e apoiar as startups, promovendo uma cultura de empreendedorismo e agindo como um catalisador para o desenvolvimento de estruturas de suporte de negócios mais amplas, partimos para o estudo da incubação de negócios com o intuito de traçar um plano estratégico para a Escola Superior de Estudos Industriais e de Gestão (ESEIG) que permitisse desenvolver a cultura empreendedora da sua comunidade e por esta via dar o seu contributo para a resolução da crise económica que o país atravessa. Começamos por fazer um enquadramento teórico da incubação de negócios e rapidamente percebemos que, sendo a ESEIG uma instituição de ensino superior, era importante incluir no estudo os conceitos de empreendedorismo e inovação e perceber ao nível teórico como funciona a relação Universidade-Empresa. De seguida, fomos para o “terreno” e percebemos que a solução para este desafio passaria por capacitar os alunos da ESEIG com as competências empresariais e empreendedoras necessárias para o desenvolvimento de qualquer empreendimento autonomamente. Faltava agora perceber qual a melhor forma de concretizar este ambicioso objetivo. Após um pouco mais de estudo, percebemos que, a paixão está no centro de empreendedorismo juntamente com outras dimensões afetivas e emocionais e pode estimular a criatividade e o reconhecimento de novos padrões de informação fundamental para a descoberta e exploração de oportunidades promissoras. Por sua vez, a alegria local (escolas, cidades, regiões, países) está associada a uma maior atividade empreendedora, o humor e sentimentos positivos, bem como a satisfação de vida geram efeitos benéficos, como melhor desempenho nas tarefas e produtividade, evolução na carreira e sucesso pessoal e maior propensão para assumir riscos. Percebemos então que é necessário desenvolver uma cultura de positividade, pelo que, sugerimos a implementação do novo quadro conceptual PROSPER (Positivity; Relationships; Outcomes; Strengths; Purpose; Engagement; Resilience) que tem o potencial de ser usado como uma ferramenta organizacional para a implementação dos sete principais componentes de bem-estar. Cientes de que o objetivo final é aumentar a intenção empreendedora dos estudantes, bem como o número efetivo de empreendedores, definimos como objetivos, promover o valor do empreendedorismo na criação de oportunidades e no desenvolvimento das competências dos estudantes (Engaging), fornecer aos estudantes oportunidades de aprendizagem empresarial (Empowering) e apoiar os estudantes na criação e no desenvolvimento de negócios (Equipping). Neste sentido, sugerimos diversas ações que materializam estes objetivos. Para finalizar, utilizamos um Lean Canvas com o intuito de concretizar a nossa proposta estratégica para ESEIG, que culmina com a criação do Empowering Lab ESEIG.

Práticas de gestão de recursos humanos: um estudo na indústria turística em Portugal

O Turismo em Portugal traduz uma das grandes apostas a nível económico e financeiro. Com o aumento da procura no Turismo Português e com a grande competitividade existente é imperativo, que a qualidade e a diferenciação dos produtos e dos serviços seja decisiva para a supervivência de muitos empreendimentos. Não só implica a prestação de serviços mas também a importância dos colaboradores nas organizações, passe a ser valorizada para o crescimento da organização. A análise de questões relacionadas com a Práticas de Recursos Humanos tem vindo a ter uma grande importância no sector organizacional, uma vez que é através delas que se reflete a natureza da organização e a sua consequente vantagem competitiva. Assim, torna-se impreterível que a Gestão de Recursos Humanos seja eficaz e eficiente, baseada em práticas e sistemas diferenciadores no mercado. Isto é, a Gestão de Recursos Humanos trata fundamentalmente a articulação e o ajustamento entre as pessoas que trabalham na organização e as necessidades que esta tem, assegurando a total utilização dos recursos humanos disponíveis (Bilhim, 2007). É sobre estas perspetivas que este estudo se debruça, tendo como principal objetivo caracterizar quais as práticas de gestão de recursos humanos, Estratégicas ou Tradicionais, existentes nos empreendimentos turísticos em Portugal. Os resultados demonstram que as PGRH Estratégicas predominantes são (1) a Comunicação e Partilha de Informação, (2) a Melhoria das Condições de Trabalho (3) e a Participação e Envolvimento dos Trabalhadores. Como PGRH mais Tradicionais os resultados apresentam como principais práticas a (1) Higiene e Segurança no Trabalho, (2) a Contratação (3) e a Formação Profissional.