20 resultados para Optimizing Compilation

em Reposit


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Renewable energy sources (RES) have unique characteristics that grant them preference in energy and environmental policies. However, considering that the renewable resources are barely controllable and sometimes unpredictable, some challenges are faced when integrating high shares of renewable sources in power systems. In order to mitigate this problem, this paper presents a decision-making methodology regarding renewable investments. The model computes the optimal renewable generation mix from different available technologies (hydro, wind and photovoltaic) that integrates a given share of renewable sources, minimizing residual demand variability, therefore stabilizing the thermal power generation. The model also includes a spatial optimization of wind farms in order to identify the best distribution of wind capacity. This methodology is applied to the Portuguese power system.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Renewable energy sources (RES) have unique characteristics that grant them preference in energy and environmental policies. However, considering that the renewable resources are barely controllable and sometimes unpredictable, some challenges are faced when integrating high shares of renewable sources in power systems. In order to mitigate this problem, this paper presents a decision-making methodology regarding renewable investments. The model computes the optimal renewable generation mix from different available technologies (hydro, wind and photovoltaic) that integrates a given share of renewable sources, minimizing residual demand variability, therefore stabilizing the thermal power generation. The model also includes a spatial optimization of wind farms in order to identify the best distribution of wind capacity. This methodology is applied to the Portuguese power system.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Even though Software Transactional Memory (STM) is one of the most promising approaches to simplify concurrent programming, current STM implementations incur significant overheads that render them impractical for many real-sized programs. The key insight of this work is that we do not need to use the same costly barriers for all the memory managed by a real-sized application, if only a small fraction of the memory is under contention lightweight barriers may be used in this case. In this work, we propose a new solution based on an approach of adaptive object metadata (AOM) to promote the use of a fast path to access objects that are not under contention. We show that this approach is able to make the performance of an STM competitive with the best fine-grained lock-based approaches in some of the more challenging benchmarks. (C) 2015 Elsevier Inc. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A insuficiência cardíaca afecta cerca de 261 mil pessoas em Portugal constituindo um problema de saúde pública. Pretendemos avaliar aspectos associados à recuperação do estado de saúde nesta síndrome, em particular a esperança, o afecto e a felicidade. Recorremos a um estudo longitudinal com 128 indivíduos sintomáticos com má fracção de ejecção do ventrículo esquerdo. Utilizámos um questionário para caracterizar os aspectos sóciodemográficos, clínicos e funcionais, o Kansas City Cardiomiopathy Questionnaire (KCCQ) para avaliar a qualidade de vida, a Subjective Hapiness Scale (SHS) para a felicidade, a HOPE Scale (HOPE) para a esperança e a Positive And Negative Afect Schedule (PANAS) para o afecto. Os questionários de caracterização sócio-demográfica, clínica e funcional, KCCQ e o SHS foram aplicados em três momentos: no internamento, prévio à instituição de terapêutica médica na sua totalidade e ao terceiro e sexto mês após a intervenção médica, na consulta externa. A maioria dos participantes eram homens em classe III da classificação da New York Heart Association com etiologia isquémica. No internamento e antes da terapêutica médica, observámos que a esperança, a felicidade e o afecto se relacionaram com a qualidade de vida, a felicidade e o afecto positivo com a esperança. No período avaliado foram submetidos a: terapia de ressincronização cardíaca (n=52), cardioversor-desfibrilhador implantável (n=44), cirurgia valvular com revascularização do miocárdio (n=14), optimização terapêutica farmacológica (n=10), transplante cardíaco (n=8). Foram significativos os resultados da qualidade de vida, da classificação da New York Heart Association, do exercício físico, da fracção de ejecção do ventrículo esquerdo e das arritmias cardíacas (estrasístoles e taquicardias ventriculares). A felicidade foi preditora da qualidade de vida e da funcionalidade. O afecto negativo foi preditor da satisfação com a insuficiência cardíaca. Concluímos da importância das variáveis positivas a par dos procedimentos médicos no tratamento das pessoas com insuficiência cardíaca. ABSTRACT - Heart failure affects about 261 000 people in Portugal constituting a public health problem. We intend to evaluate aspects of the health recovery in this syndrome, in particular hope, affection and happiness. We used a longitudinal study with 128 symptomatic patients with poor ejection fraction of left ventricle. We used a questionnaire to characterize the socio-demographic, clinical and functional aspects, the Kansas City Cardiomiopathy Questionnaire (KCCQ) to assess the quality of life, the Subjective Happiness Scale (SHS) for happiness, the HOPE Scale (HOPE) for hope and the Positive And Negative Affect Schedule (PANAS) for affection. The questionnaires of sociodemographic, clinical and functional KCCQ and SHS were applied on three occasions: on admission, prior to the execution of medical therapy in its totality and in the third and sixth months after medical intervention in the outpatient. Most of the participants were men in Class III New York Heart Association classification with ischemic etiology. At admission and before medical therapy, we observed that the hope, happiness and affection were related to the quality of life, happiness and positive affect with hope. Over the studied period were submitted to: cardiac resynchronization therapy (n=52), implantable cardioverter-defibrillator (n=44), valvular surgery with coronary artery bypass graft surgery (n=14), optimizing drug therapy (n=10), heart transplant (n=8). The significant results were the quality of life, the New York Heart Association classification, the exercise, the ejection fraction and left ventricular cardiac arrhythmias (ventricular tachycardia and estrasistoles). Happiness was a predictor of quality of life and functionality. The negative affect was a predictor of satisfaction with heart failure. We concluded that the positive variables and the medical procedures were important in treating people with heart failure.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O presente relatório de estágio enquadra-se no âmbito do Trabalho Final de Mestrado (TFM) do curso de Engenharia Civil, área de especialização de Hidráulica, do Instituto Superior de Engenharia de Lisboa, e baseia-se na temática dos sistemas de abastecimento de água e drenagem de águas residuais. O estágio, intitulado de “Sistemas de Abastecimento de Agua e Saneamento Básico”, decorreu numa empresa de consultaria de engenharia denominada ENGIDRO – Estudos de Engenharia, Lda., vocacionada para a realização de estudos e projectos na área de Hidráulica, com particular incidência na Hidráulica Urbana e Saneamento Básico. O estágio iniciou-se com um adequado enquadramento profissional na empresa e incidiu principalmente no desenvolvimento de trabalhos de concepção e dimensionamento, a nível de projectos de execução, de sistemas de abastecimento de água e de saneamento básico, para 21 localidades da província de Lunda Sul, em Angola, com prestação de serviços para o Governo Provincial de Lunda Sul – Direcção Provincial da Energia e Aguas, juntamente com empresa CENGA – Consultores de Engenharia de Angola, S.A. Na prestação de serviços à entidade contratante foram efectuados trabalhos de campo, que consistiram principalmente em reconhecimentos do terreno, levantamentos topográficos e recolha de informação relevante sobre elementos condicionantes dos projectos (origens e disponibilidades de água, natureza e declive dos terrenos, tipos de infra-estruturas locais) e trabalhos de gabinete para compilação e análise da informação recolhida na elaboração dos projectos de execução, incluindo pecas desenhadas (desenhos pormenorizados) e peças escritas (memórias descritivas e justificativas, medições e orçamentos). Sendo os projectos destinados a aglomerados populacionais pouco desenvolvidos e com carências e condicionantes de diversa ordem (falta de energia eléctrica, de acessos, de telecomunicações, de meios técnicos e materiais, entre outros), prestou-se especial atenção aos aspectos da concepção, privilegiando soluções de baixa tecnologia, mais fáceis de explorar e manter com os recursos locais disponíveis.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A primary tool for regional tsunami hazard assessment is a reliable historical and instrumental catalogue of events. Morocco by its geographical situation, with two marine sides, stretching along the Atlantic coast to the west and along the Mediterranean coast to the north, is the country of Western Africa most exposed to the risk of tsunamis. Previous information on tsunami events affecting Morocco are included in the Iberian and/or the Mediterranean lists of tsunami events, as it is the case of the European GITEC Tsunami Catalogue, but there is a need to organize this information in a dataset and to assess the likelihood of claimed historical tsunamis in Morocco. Due to the fact that Moroccan sources are scarce, this compilation rely on historical documentation from neighbouring countries (Portugal and Spain) and so the compatibility between the new tsunami catalogue presented here and those that correspond to the same source areas is also discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We report in this paper the recent advances we obtained in optimizing a color image sensor based on the laser-scanned-photodiode (LSP) technique. A novel device structure based on a a-SiC:H/a-Si:H pin/pin tandem structure has been tested for a proper color separation process that takes advantage on the different filtering properties due to the different light penetration depth at different wavelengths a-SM and a-SiC:H. While the green and the red images give, in comparison with previous tested structures, a weak response, this structure shows a very good recognition of blue color under reverse bias, leaving a good margin for future device optimization in order to achieve a complete and satisfactory RGB image mapping. Experimental results about the spectral collection efficiency are presented and discussed from the point of view of the color sensor applications. The physics behind the device functioning is explained by recurring to a numerical simulation of the internal electrical configuration of the device.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper presents an algorithm to efficiently generate the state-space of systems specified using the IOPT Petri-net modeling formalism. IOPT nets are a non-autonomous Petri-net class, based on Place-Transition nets with an extended set of features designed to allow the rapid prototyping and synthesis of system controllers through an existing hardware-software co-design framework. To obtain coherent and deterministic operation, IOPT nets use a maximal-step execution semantics where, in a single execution step, all enabled transitions will fire simultaneously. This fact increases the resulting state-space complexity and can cause an arc "explosion" effect. Real-world applications, with several million states, will reach a higher order of magnitude number of arcs, leading to the need for high performance state-space generator algorithms. The proposed algorithm applies a compilation approach to read a PNML file containing one IOPT model and automatically generate an optimized C program to calculate the corresponding state-space.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Projecto para obtenção do grau de Mestre em Engenharia Informática e de computadores

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Contabilidade e Gestão das Instituições Financeiras

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre Em Engenharia Química e Biológica Ramo de processos Químicos