Kinetic model for selective cultivation of microfungi in a microscreen process for food processing wastewater treatment and biomass production

The research was aimed at developing a technology to combine the production of useful microfungi with the treatment of wastewater from food processing. A recycle bioreactor equipped with a micro-screen was developed as a wastewater treatment system on a laboratory scale to contain a Rhizopus culture and maintain its dominance under non-aseptic conditions. Competitive growth of bacteria was observed, but this was minimised by manipulation of the solids retention time and the hydraulic retention time. Removal of about 90% of the waste organic material (as BOD) from the wastewater was achieved simultaneously. Since essentially all fungi are retained behind the 100 mum aperture screen, the solids retention time could be controlled by the rate of harvesting. The hydraulic retention time was employed to control the bacterial growth as the bacteria were washed through the screen at a short HRT. A steady state model was developed to determine these two parameters. This model predicts the effluent quality. Experimental work is still needed to determine the growth characteristics of the selected fungal species under optimum conditions (pH and temperature).

Equivalence of the Peleg, Pilosof and Singh-Kulshrestha models for water absorption in food

The similarity between the Peleg, Pilosof –Boquet–Batholomai and Singh–Kulshrestha models was investigated using the hydration behaviours of whey protein concentrate, wheat starch and whey protein isolate at 30 °C in 100% relative humidity. The three models were shown to be mathematically the same within experimental variations, and they yielded parameters that are related. The models, in their linear and original forms, were suitable (r2 > 0.98) in describing the sorption behaviours of the samples, and are sensitive to the length of the sorption segment used in the computation. The whey proteins absorbed more moisture than the wheat starch, and the isolate exhibited a higher sorptive ability than the concentrate.

Crisis management and risk communication: Why the food industry must get it right

There is public unease about food-related issues including food additives, food poisoning bacteria and GM ingredients. The public wants evidence of no risks, but all regulators can ever offer is no evidence of risk or evidence of a very small risk. The situation is complex because experts and non-experts can perceive the same risk in vastly different ways. The way in which the food industry manages crises and communicates risks will determine the public acceptance and success of new technologies such as GM foods and nanomaterials. There is a need for the food industry (including regulators and scientific experts) to sharpen up their risk communication skills to ensure that technical innovations are accepted by consumers, and crises such as food recalls do not undermine the public's confidence in the food industry. The AIFST has a key role to play in driving the risk communication process and allaying public unease about food-related issues.

Eco-efficiency and dairy processing

The dairy industry is a global industry that provides significant nutritional benefit to many cultures. in australia the industry is especially important economically, being a large export earner, as well as a vital domestic sector. in recent years the sector has come under increased competitive pressure and has restructured to cope with the changes. the industry recently undertook an eco-efficiency project to investigate where business and environmental improvements might be found. the project involved collecting and collating previous project data and surveying 38 companies in different dairy operations, from market milk to dried products. after the survey, 10 sites in two states were visited to discuss eco-efficiency issues in detail with key players. From the surveys, visits and data compilation, a comprehensive manual was prepared to help interested companies find relevant eco-efficiency data easily and assist them in the implementation process. ten fact sheets were also produced covering the topics of water management, water recycling and re-use, refrigeration optimisation, boiler optimisation, biogas, the use of treated wastewater, yield optimisation and product recovery, optimisation of ciP systems, chemical use and membranes the project highlighted the large amount of technical and engineering expertise within the sector that could result in eco-efficiency outcomes and also identified the opportunities that exist for changes to occur in some operations to save energy, input raw materials and water.

Comparison of texture of yogurt made from conventionally treated milk and UHT milk fortified with low-heat skim milk powder

The textures of yogurt made from ultra-high temperature (UHT) treated and conventionally treated milks at high total solids were investigated. The yogurt premixes, fortified with low-heat skim milk powder to 16%, 18%, and 20% total solids, were UHT processed at 143 degreesC for 6 s and heated at 85 degreesC for 30 min using the conventional method. The onset of gelation was delayed in the UHT-processed milk compared with conventionally heated milk. During fermentation, the viscosity of yogurt made, from UHT-treated milk at 20% total solids was close to that of yogurt made from conventionally treated milk with 16% total solids. However, after storage for greater than or equal to1 d, the yogurt made from UHT-treated milk had lower viscosity and gel strength than the yogurt made from conventionally treated milk. The solids level had no influence on yogurt culture growth.

B cell chronic lymphocytic leukaemia cells have reduced capacity to upregulate expression of MHC class I in response to interferon-gamma

Aims: An important consideration in the design of a tumour vaccine is the ability of tumour-specific cytotoxic T lymphocytes (CTL) to recognise unmanipulated tumour cells in vivo. To determine whether B-CLL might use an escape strategy, the current studies compared B-CLL and normal B cell MHC class I expression. Methods: Flow cytometry, TAP allele PCR and MHC class I PCR were used. Results: While baseline expression of MHC class I did not differ, upregulation of MHC class I expression by B-CLL cells in response to IFN-gamma was reduced. No deletions or mutations of TAP 1 or 2 genes were detected. B-CLL cells upregulated TAP protein expression in response to IFN-gamma. Responsiveness of B-CLL MHC class I mRNA to IFN-gamma was not impaired. Conclusions: The data suggest that MHC class I molecules might be less stable at the cell surface in B-CLL than normal B cells, as a result of the described release of beta(2)m and beta(2)m-free class I heavy chains from the membrane. This relative MHC class I expression defect of B-CLL cells may reduce their susceptibility to CTL lysis in response to immunotherapeutic approaches.

Flavonoids in Australian Melaleuca, Guioa, Lophostemon, Banksia and Helianthus honeys and their potential for floral authentication

Flavonoids in Australian honeys from five botanical species (Melaleuca, Guioa, Lophostemon, Banksia and Helianthus) have been analyzed in relation to their floral origins. Tea tree (Melaleuca quinquenervia) and heath (Banksia ericifolia) honeys show a common flavonoid profile comprising myricetin (3,5,7,3',4',5'-hexahydroxyflavone), tricetin (5,7,3',4,5'-pentahydroxyflavone), querectin (3,5,7,3',4'-pentahydroxyflavone) and luteolin (5,7,3',4'-tetrahydroxyflavone), which was previously suggested as a floral marker for an Australian Eucalyptus honey (bloodwood or Eucalyptus intermedia honey). These honeys of various floral species can be differentiated by their levels of total flavonoids, being 2.12 mg/100 g for heath honey and 6.35 m/100 g for tea tree honey. In brush box (Lophostemon conferta) honey, the flavonoid profile comprising mainly tricetin, luteolin and quercetin is similar to that of another Eucalyptus honey (yellow box or Eucalyptus melliodora honey). These results indicate that the flavonoid profiles in some of the Australian non-Eucalyptus honeys may contain more or less certain flavonoids from Eucalyptus floral sources because of the diversity and extensive availability of Eucalyptus nectars for honeybee foraging yearly around or a possible cross contamination of the monofloral honeys during collection, transportation and/or storage. Further analyses are required to differentiate and/or verify the botanical sources of the flavonoids that contribute to the flavonoid profiles of these honeys, by restricting honey sampling areas and procedures, employing other complementary analytical methods (e.g. pollen analysis, sugar profile) and using materials (e.g. nectar) directly sourced from the flowering plant for comparative studies. In Australian crow ash (Guioa semiglauca) honey, myricetin, tricetin, quercetin, luteolin and an unknown flavonoid have been found to be the main flavonoids, which is characteristic only to this type of honey, and could thus be used as the floral marker, while in Australian sunflower (Helianthus annuus) honey, the content of total flavonoids is the smallest amount comparing to those in the other honeys analysed in this study. However, the flavonoid quercetin and the flavonoid profile mainly consisting of quercetin, quercetin 3,3'-dimethyl ether (5,7,4'-trihydroxy3,3'-dimethoxyflavone), myricetin and luteolin are characteristic only to this sunflower honey and could thus be used for the authentication.