Síntese de azacalixarenos para o reconhecimento molecular de aniões

No âmbito desta dissertação são apresentados novos recetores sintéticos baseados na plataforma macrocíclica tetraazacalix[2]areno[2]triazina incorporando bases de purina ou unidades de aminoácidos naturais. Estes recetores foram preparados tendo como objectivo o reconhecimento seletivo de fármacos e aniões biologicamente relevantes. No primeiro capítulo é apresentada uma revisão bibliográfica sobre recetores derivados de tetraazacalix[2]areno[2]triazina demonstrando-se que a funcionalização desta plataforma, nos anéis de triazina ou nos anéis benzénicos, encontra-se ainda na infância bem como a investigação das suas afinidades para aniões. Subsequentemente, considerando os aniões principais estudados nesta tese, aniões carboxilatos alifáticos, aromáticos e aminoácidos é apresentada uma revisão bibliográfica sobre os estudos de reconhecimento molecular reportados na literatura, entre derivados de calix[4]areno e este tipo de aniões. No segundo capítulo descrevem-se as sínteses de recetores com uma ou duas unidades de aminoácido, L-alanina (AC1A, AC2A) e L-triptofano (AC2T), ancoradas nos anéis benzénicos da plataforma tetraazacalix[2]areno[2]triazina. Como demostrado no capítulo 3, os grupos N-H dos azotos em ponte são locais de reconhecimento de aniões. Neste contexto, estes macrociclos foram também metilados nos azotos em ponte (Me4AC2A e Me4AC2T) de modo a direcionar o reconhecimento cooperativo de aniões exclusivamente através dos grupos N-H das unidades de aminoácidos. A lipofilicidade destas moléculas foi alterada por substituição dos átomos de cloro das triazinas por dihexilamina. Os compostos sintetizados foram caracterizados através de técnicas espetroscópicas complementadas em alguns compostos por difração de raios X de cristal único. No capítulo 3 apresentam-se os estudos de reconhecimento molecular entre os recetores sintetizados e aniões derivados de ácidos carboxílicos (mono, di e tricarboxílicos) alifáticos, aromáticos, isoméricos e aniões inorgânicos. Estes estudos foram efetuados em DMSO-d6 ou em CDCl3 por titulações de RMN de 1H com determinação das respetivas constantes de associação. Para os recetores AC1A e AC2A o reconhecimento da maioria dos aniões estudados ocorre simultaneamente através dos grupos N-H dos azotos em ponte e do N-H da amida do braço da L-alanina. Contudo, no caso do isoftalato e tricarboxilato, com dois e três grupos carboxilato em posição meta, ocorre preferencialmente através dos dois braços de L-alanina como sugerido por estudos de dinâmica molecular em DMSO. Os estudos de associação realizados para os macrociclos que contêm unidades de L-triptofano, AC2T e Me4AC2T, mostraram que o reconhecimento de aniões é efetuado preferencialmente através de ligações de hidrogénio estabelecidas com os grupos amida e amina do grupo indole dos braços de aminoácido em detrimento das aminas em ponte como em AC1A e AC2A. Para a série dos carboxilatos alifáticos verifica-se que o recetor Me4AC2A tem maior afinidade com o anião glutarato (K= 389 M-1, DMSO-d6) enquanto o recetor Me4AC2T associa-se mais fortemente com o anião oxalato (K= 776 M-1, CDCl3). Todas as Job plots efetuadas confirmaram que as entidades estudadas obedeciam a uma estequiometria recetor/anião de 1:1.

A aprendizagem musical como elemento de aperfeiçoamento de competências matemáticas

Tomando como ponto de partida a relação entre música e matemática, nesta investigação temos como principal objetivo estudar a influência da aprendizagem musical no desempenho matemático. Pretendeu-se ainda observar o efeito de um conjunto de preditores no referido desempenho, mais concretamente do nível socioeconómico, da inteligência e de variáveis cognitivo-motivacionais (motivação, expectativas de autoeficácia e atribuições causais). Numa primeira parte, delineámos as linhas teóricas desta investigação. Começámos por relatar a relação entre música e matemática no âmbito da musicologia histórica, da teoria e análise musicais, da acústica e das tendências na composição musical, evidenciando os mecanismos de ligação entre elementos e conceitos musicais e tópicos e temas matemáticos. Relatámos os benefícios da exposição musical ao nível do desenvolvimento cognitivo e intelectual, destacando o aumento do raciocínio espacial, do desempenho matemático e da inteligência com a aprendizagem musical. De seguida, descrevemos o impacto das aulas de música no aumento do desempenho académico a várias disciplinas, nomeadamente a Matemática, enfatizando a associação da duração da aprendizagem musical com o aumento das capacidades matemáticas; para além do efeito da aprendizagem musical, procurámos ainda explicação de um desempenho académico melhorado com base em variáveis potenciadoras da performance, tais como o nível socioeconómico e a inteligência. Nesta linha de abordagem, explorámos os efeitos de variáveis influentes do desempenho académico fora do contexto musical, reportando-nos ao nível socioeconómico, à inteligência e às dimensões cognitivo-motivacionais (motivação, expectativas de autoeficácia e atribuições causais), destacando o poder preditivo da inteligência, seguido do nível socioeconómico e da motivação. Por fim, referimo-nos à interação entre música e encéfalo por meio das temáticas da plasticidade neural estrutural e funcional, do efeito da aprendizagem e performance musicais, da cognição musical e domínios não musicais, bem como dos fatores genéticos; sublinhamos a possibilidade de ligações entre a cognição musical e os domínios espacial e matemático. Numa segunda parte, apresentamos a investigação que desenvolvemos em contexto escolar com 112 alunos do 7º ano de escolaridade provenientes de 12 escolas do Ensino Básico. Nove são do Ensino Especializado de Música e três são do Ensino Regular. No total, as escolas enquadram-se nas zonas urbanas de Braga, Coimbra e Lisboa. O estudo possui carácter longitudinal e abrange três anos letivos, do 7º ao 9º anos de escolaridade. Após explanação dos objetivos, das hipóteses de investigação, da caracterização da amostra, da descrição dos instrumentos de avaliação e respetiva validação empírica, relatamos os resultados que encontrámos. Estes permitiram, por um lado, validar a hipótese de que os alunos submetidos ao ensino formal de música apresentam um desempenho matemático superior comparativamente aos alunos que não frequentaram este tipo de ensino (H1) e, por outro, sustentar que o número de anos de aprendizagem musical contribui para o aumento do desempenho matemático (H3). Sublinha-se, ainda, que os alunos de instrumento de teclado revelaram desempenho matemático mais elevado em relação aos seus pares que estudaram outros instrumentos. Já no que se refere ao poder preditivo do tipo de ensino (Ensino Especializado de Música vs. Ensino Regular), apurámos que a formação em música prevê melhores desempenhos a matemática; destaca-se que as variáveis em estudo, tais como o nível socioeconómico, a motivação, as expectativas de autoeficácia e a inteligência adicionam capacidade explicativa do desempenho matemático, sendo que a presença da aprendizagem musical perdeu aptidão preditiva apenas na presença da inteligência. Contudo, após controlo estatístico da inteligência, foi possível concluir que a aprendizagem musical mantém o poder preditivo no desempenho matemático (H2). Os resultados permitiram identificar em que tópicos e temas matemáticos relacionados com os elementos e conceitos musicais os alunos com aprendizagem musical apresentam melhores desempenhos, evidenciando-se os tópicos no âmbito da Geometria (H4). Observámos, também, que é possível prever o desempenho matemático a partir do raciocínio espacial dos alunos (H5). Finalmente, referimos as limitações, refletimos sobre as implicações que estes resultados poderão trazer no âmbito do ensino da música em Portugal e apontamos pistas conducentes ao desenvolvimento de investigações futuras.

Channel estimation and parameters acquisition systems employing cooperative diversity

This work investigates new channel estimation schemes for the forthcoming and future generation of cellular systems for which cooperative techniques are regarded. The studied cooperative systems are designed to re-transmit the received information to the user terminal via the relay nodes, in order to make use of benefits such as high throughput, fairness in access and extra coverage. The cooperative scenarios rely on OFDM-based systems employing classical and pilot-based channel estimators, which were originally designed to pointto-point links. The analytical studies consider two relaying protocols, namely, the Amplifyand-Forward and the Equalise-and-Forward, both for the downlink case. The relaying channels statistics show that such channels entail specific characteristics that comply to a proper filter and equalisation designs. Therefore, adjustments in the estimation process are needed in order to obtain the relay channel estimates, refine these initial estimates via iterative processing and obtain others system parameters that are required in the equalisation. The system performance is evaluated considering standardised specifications and the International Telecommunication Union multipath channel models.

Photodynamic inactivation of bacteria by cationic porphyrins : their cellular targets and potential environmental applications

Photodynamic inactivation (PDI) is defined as the process of cell destruction by oxidative stress resulting from the interaction between light and a photosensitizer (PS), in the presence of molecular oxygen. PDI of bacteria has been extensively studied in recent years, proving to be a promising alternative to conventional antimicrobial agents for the treatment of superficial and localized infections. Moreover, the applicability of PDI goes far beyond the clinical field, as its potential use in water disinfection, using PS immobilized on solid supports, is currently under study. The aim of the first part of this work was to study the oxidative modifications in phospholipids, nucleic acids and proteins of Escherichia coli and Staphylococcus warneri, subjected to photodynamic treatment with cationic porphyrins. The aims of the second part of the work were to study the efficiency of PDI in aquaculture water and the influence of different physicalchemical parameters in this process, using the Gram-negative bioluminescent bacterium Vibrio fischeri, and to evaluate the possibility of recycling cationic PS immobilized on magnetic nanoparticles. To study the oxidative changes in membrane phospholipids, a lipidomic approach has been used, combining chromatographic techniques and mass spectrometry. The FOX2 assay was used to determine the concentration of lipid hydroperoxides generated after treatment. The oxidative modifications in the proteins were analyzed by one-dimensional polyacrylamide gel electrophoresis (SDS-PAGE). Changes in the intracellular nucleic acids were analyzed by agarose gel electrophoresis and the concentration of doublestranded DNA was determined by fluorimetry. The oxidative changes of bacterial PDI at the molecular level were analyzed by infrared spectroscopy. In laboratory tests, bacteria (108 CFU mL-1) were irradiated with white light (4.0 mW cm-2) after incubation with the PS (Tri-Py+-Me-PF or Tetra-Py+-Me) at concentrations of 0.5 and 5.0 μM for S. warneri and E. coli, respectively. Bacteria were irradiated with different light doses (up to 9.6 J cm-2 for S. warneri and up to 64.8 J cm-2 for E. coli) and the changes were evaluated throughout the irradiation time. In the study of phospholipids, only the porphyrin Tri-Py+-Me-PF and a light dose of 64.8 J cm-2 were tested. The efficiency of PDI in aquaculture has been evaluated in two different conditions: in buffer solution, varying temperature, pH, salinity and oxygen concentration, and in aquaculture water samples, to reproduce the conditions of PDI in situ. The kinetics of the process was determined in realtime during the experiments by measuring the bioluminescence of V. fischeri (107 CFU mL-1, corresponding to a level of bioluminescence of 105 relative light units). A concentration of 5.0 μM of Tri-Py+-Me-PF was used in the experiments with buffer solution, and 10 to 50 μM in the experiments with aquaculture water. Artificial white light (4.0 mW cm-2) and solar irradiation (40 mW cm-2) were used as light sources.

Control design for multicast-aware class-based networks

The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.

Cooperative positioning for heterogeneous wireless systems

Future emerging market trends head towards positioning based services placing a new perspective on the way we obtain and exploit positioning information. On one hand, innovations in information technology and wireless communication systems enabled the development of numerous location based applications such as vehicle navigation and tracking, sensor networks applications, home automation, asset management, security and context aware location services. On the other hand, wireless networks themselves may bene t from localization information to improve the performances of di erent network layers. Location based routing, synchronization, interference cancellation are prime examples of applications where location information can be useful. Typical positioning solutions rely on measurements and exploitation of distance dependent signal metrics, such as the received signal strength, time of arrival or angle of arrival. They are cheaper and easier to implement than the dedicated positioning systems based on ngerprinting, but at the cost of accuracy. Therefore intelligent localization algorithms and signal processing techniques have to be applied to mitigate the lack of accuracy in distance estimates. Cooperation between nodes is used in cases where conventional positioning techniques do not perform well due to lack of existing infrastructure, or obstructed indoor environment. The objective is to concentrate on hybrid architecture where some nodes have points of attachment to an infrastructure, and simultaneously are interconnected via short-range ad hoc links. The availability of more capable handsets enables more innovative scenarios that take advantage of multiple radio access networks as well as peer-to-peer links for positioning. Link selection is used to optimize the tradeo between the power consumption of participating nodes and the quality of target localization. The Geometric Dilution of Precision and the Cramer-Rao Lower Bound can be used as criteria for choosing the appropriate set of anchor nodes and corresponding measurements before attempting location estimation itself. This work analyzes the existing solutions for node selection in order to improve localization performance, and proposes a novel method based on utility functions. The proposed method is then extended to mobile and heterogeneous environments. Simulations have been carried out, as well as evaluation with real measurement data. In addition, some speci c cases have been considered, such as localization in ill-conditioned scenarios and the use of negative information. The proposed approaches have shown to enhance estimation accuracy, whilst signi cantly reducing complexity, power consumption and signalling overhead.

Network virtualisation from an operator perspective

Network virtualisation is seen as a promising approach to overcome the so-called “Internet impasse” and bring innovation back into the Internet, by allowing easier migration towards novel networking approaches as well as the coexistence of complementary network architectures on a shared infrastructure in a commercial context. Recently, the interest from the operators and mainstream industry in network virtualisation has grown quite significantly, as the potential benefits of virtualisation became clearer, both from an economical and an operational point of view. In the beginning, the concept has been mainly a research topic and has been materialized in small-scale testbeds and research network environments. This PhD Thesis aims to provide the network operator with a set of mechanisms and algorithms capable of managing and controlling virtual networks. To this end, we propose a framework that aims to allocate, monitor and control virtual resources in a centralized and efficient manner. In order to analyse the performance of the framework, we performed the implementation and evaluation on a small-scale testbed. To enable the operator to make an efficient allocation, in real-time, and on-demand, of virtual networks onto the substrate network, it is proposed a heuristic algorithm to perform the virtual network mapping. For the network operator to obtain the highest profit of the physical network, it is also proposed a mathematical formulation that aims to maximize the number of allocated virtual networks onto the physical network. Since the power consumption of the physical network is very significant in the operating costs, it is important to make the allocation of virtual networks in fewer physical resources and onto physical resources already active. To address this challenge, we propose a mathematical formulation that aims to minimize the energy consumption of the physical network without affecting the efficiency of the allocation of virtual networks. To minimize fragmentation of the physical network while increasing the revenue of the operator, it is extended the initial formulation to contemplate the re-optimization of previously mapped virtual networks, so that the operator has a better use of its physical infrastructure. It is also necessary to address the migration of virtual networks, either for reasons of load balancing or for reasons of imminent failure of physical resources, without affecting the proper functioning of the virtual network. To this end, we propose a method based on cloning techniques to perform the migration of virtual networks across the physical infrastructure, transparently, and without affecting the virtual network. In order to assess the resilience of virtual networks to physical network failures, while obtaining the optimal solution for the migration of virtual networks in case of imminent failure of physical resources, the mathematical formulation is extended to minimize the number of nodes migrated and the relocation of virtual links. In comparison with our optimization proposals, we found out that existing heuristics for mapping virtual networks have a poor performance. We also found that it is possible to minimize the energy consumption without penalizing the efficient allocation. By applying the re-optimization on the virtual networks, it has been shown that it is possible to obtain more free resources as well as having the physical resources better balanced. Finally, it was shown that virtual networks are quite resilient to failures on the physical network.

Communication between nodes for autonomic and distributed management

Over the last decade, the most widespread approaches for traditional management were based on the Simple Network Management Protocol (SNMP) or Common Management Information Protocol (CMIP). However, they both have several problems in terms of scalability, due to their centralization characteristics. Although the distributed management approaches exhibit better performance in terms of scalability, they still underperform regarding communication costs, autonomy, extensibility, exibility, robustness, and cooperation between network nodes. The cooperation between network nodes normally requires excessive overheads for synchronization and dissemination of management information in the network. For emerging dynamic and large-scale networking environments, as envisioned in Next Generation Networks (NGNs), exponential growth in the number of network devices and mobile communications and application demands is expected. Thus, a high degree of management automation is an important requirement, along with new mechanisms that promote it optimally and e ciently, taking into account the need for high cooperation between the nodes. Current approaches for self and autonomic management allow the network administrator to manage large areas, performing fast reaction and e ciently facing unexpected problems. The management functionalities should be delegated to a self-organized plane operating within the network, that decrease the network complexity and the control information ow, as opposed to centralized or external servers. This Thesis aims to propose and develop a communication framework for distributed network management which integrates a set of mechanisms for initial communication, exchange of management information, network (re) organization and data dissemination, attempting to meet the autonomic and distributed management requirements posed by NGNs. The mechanisms are lightweight and portable, and they can operate in di erent hardware architectures and include all the requirements to maintain the basis for an e cient communication between nodes in order to ensure autonomic network management. Moreover, those mechanisms were explored in diverse network conditions and events, such as device and link errors, di erent tra c/network loads and requirements. The results obtained through simulation and real experimentation show that the proposed mechanisms provide a lower convergence time, smaller overhead impact in the network, faster dissemination of management information, increase stability and quality of the nodes associations, and enable the support for e cient data information delivery in comparison to the base mechanisms analyzed. Finally, all mechanisms for communication between nodes proposed in this Thesis, that support and distribute the management information and network control functionalities, were devised and developed to operate in completely decentralized scenarios.

Analysis of the organic matter associated to sea salt : definition of potential molecular markers based on the volatile composition and presence of glycosidic derivatives and polysaccharides

Sea salt is a natural product obtained from the evaporation of seawater in saltpans due to the combined effect of wind and sunlight. Nowadays, there is a growing interest for protection and re-valorisation of saltpans intrinsically associated to the quality of sea salt that can be evaluated by its physico-chemical properties. These man-made systems can be located in different geographical areas presenting different environmental surroundings. During the crystallization process, organic compounds coming from these surroundings can be incorporated into sea salt crystals, influencing their final composition. The organic matter associated to sea salt arises from three main sources: algae, surrounding bacterial community, and anthropogenic activity. Based on the hypothesis that sea salt contains associated organic compounds that can be used as markers of the product, including saltpans surrounding environment, the aim of this PhD thesis was to identify these compounds. With this purpose, this work comprised: 1) a deep characterisation of the volatile composition of sea salt by headspace solid phase microextraction combined with comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (HS-SPME/GCGC–ToFMS) methodology, in search of potential sea salt volatile markers; 2) the development of a methodology to isolate the polymeric material potentially present in sea salt, in amounts that allow its characterisation in terms of polysaccharides and protein; and 3) to explore the possible presence of triacylglycerides. The high chromatographic resolution and sensitivity of GC×GC–ToFMS enabled the separation and identification of a higher number of volatile compounds from sea salt, about three folds, compared to unidimentional chromatography (GC–qMS). The chromatographic contour plots obtained revealed the complexity of marine salt volatile composition and confirmed the relevance of GC×GC–ToFMS for this type of analysis. The structured bidimentional chromatographic profile arising from 1D volatility and 2D polarity was demonstrated, allowing more reliable identifications. Results obtained for analysis of salt from two locations in Aveiro and harvested over three years suggest the loss of volatile compounds along the time of storage of the salt. From Atlantic Ocean salts of seven different geographical origins, all produced in 2007, it was possible to identify a sub-set of ten compounds present in all salts, namely 6-methyl-5-hepten-2-one, 2,2,6-trimethylcyclohexanone, isophorone, ketoisophorone, β-ionone-5,6-epoxide, dihydroactinidiolide, 6,10,14-trimethyl-2-pentadecanone, 3-hydroxy-2,4,4-trimethylpentyl 2-methylpropanoate, 2,4,4-trimethylpentane-1,3-diyl bis(2-methylpropanoate), and 2-ethyl-1-hexanol. These ten compounds were considered potential volatile markers of sea salt. Seven of these compounds are carotenoid-derived compounds, and the other three may result from the integration of compounds from anthropogenic activity as metabolites of marine organisms. The present PhD work also allowed the isolation and characterisation, for the first time, of polymeric material from sea salt, using 16 Atlantic Ocean salts. A dialysis-based methodology was developed to isolate the polymeric material from sea salt in amounts that allowed its characterisation. The median content of polymeric material isolated from the 16 salts was 144 mg per kg of salt, e.g. 0.014% (w/w). Mid-infrared spectroscopy and thermogravimetry revealed the main occurrence of sulfated polysaccharides, as well as the presence of protein in the polymeric material from sea salt. Sea salt polysaccharides were found to be rich in uronic acid residues (21 mol%), glucose (18), galactose (16), and fucose (13). Sulfate content represented a median of 45 mol%, being the median content of sulfated polysaccharides 461 mg/g of polymeric material, which accounted for 66 mg/kg of dry salt. Glycosidic linkage composition indicates that the main sugar residues that could carry one or more sulfate groups were identified as fucose and galactose. This fact allowed to infer that the polysaccharides from sea salt arise mainly from algae, due to their abundance and composition. The amino acid profile of the polymeric material from the 16 Atlantic Ocean salts showed as main residues, as medians, alanine (25 mol%), leucine (14), and valine (14), which are hydrophobic, being the median protein content 35 mg/g, i.e. 4,9 mg per kg of dry salt. Beside the occurrence of hydrophobic volatile compounds in sea salt, hydrophobic non-volatile compounds were also detected. Triacylglycerides were obtained from sea salt by soxhlet extraction with n-hexane. Fatty acid composition revealed palmitic acid as the major residue (43 mol%), followed by stearic (13), linolenic (13), oleic (12), and linoleic (9). Sea salt triacylglycerides median content was 1.5 mg per kg of dry salt. Both protein and triacylglycerides seem to arise from macro and microalgae, phytoplankton and cyanobacteria, due to their abundance and composition. Despite the variability resulting from saltpans surrounding environment, this PhD thesis allowed the identification of a sea salt characteristic organic compounds profile based on volatile compounds, polysaccharides, protein, and triacylglycerides.

Digital storytelling: student ID in higher education

Identity achievement is related to personality, as well as cognitive and interpersonal development. In tandem with the deep structural changes that have taken place in society, education must also shift towards a teaching approach focused on learning and the overall development of the student. The integration of technology may be the drive to foster the needed changes. We draw on the literature of multiple subject areas as basis for our work, namely: identity construction and self-representation, within a psychological and social standpoint; Higher Education (HE) in Portugal after Bologna, college student development and other intrinsic relationships, namely the role of emotions and interpersonal relationships in the learning process; the technological evolution of storytelling towards Digital Storytelling (DS) – the Californian model – and its connections to identity and education. Ultimately we propose DS as the aggregator capable of humanizing HE while developing essential skills and competences. Grounded on an interpretative/constructivist paradigm, we implemented a qualitative case study to explore DS in HE. In three attempts to collect student data, we gathered detailed observation notes from two Story Circles; twelve student written reflections; fourteen Digital Stories and detailed observation notes from one Story Show. We carried out three focus groups with teachers where we discussed their perceptions of each student prior to and after watching the Digital Stories, in addition to their opinion on DS in HE as a teaching and learning method and its influence on interpersonal relationships. We sought understandings of the integration of DS to analyze student selfperception and self-representation in HE contexts and intersected our findings with teachers’ perceptions of their students. We compared teachers’ and students’ perspectives, through the analysis of data collected throughout the DS process – Story Circle, Story Creation and Story Show – and triangulated that information with the students’ personal reflections and teacher perceptions. Finally we questioned if and how DS may influence teachers’ perceptions of students. We found participants to be the ultimate gatekeepers in our study. Very few students and teachers voluntarily came forth to take part in the study, confirming the challenge remains in getting participants to see the value and understand the academic rigor of DS. Despite this reluctance, DS proved to be an asset for teachers and students directly and indirectly involved in the study. DS challenges HE contexts, namely teacher established perception of students; student’s own expectations regarding learning in HE; the emotional realm, the private vs. public dichotomy and the shift in educational roles.

Monte Carlo studies of phase transitions and adsorption : application to n-6 Lennard-Jones, C60 and zeolite systems

The solid-fluid transition properties of the n - 6 Lennard-Jones system are studied by means of extensive free energy calculations. Different values of the parameter n which regulates the steepness of the short-range repulsive interaction are investigated. Furthermore, the free energies of the n < 12 systems are calculated using the n = 12 system as a reference. The method relies on a generalization of the multiple histogram method that combines independent canonical ensemble simulations performed with different Hamiltonians and computes the free energy difference between them. The phase behavior of the fullerene C60 solid is studied by performing NPT simulations using atomistic models which treat each carbon in the molecule as a separate interaction site with additional bond charges. In particular, the transition from an orientationally frozen phase at low temperatures to one where the molecules are freely rotating at higher temperatures is studied as a function of applied pressure. The adsorption of molecular hydrogen in the zeolite NaA is investigated by means of grand-canonical Monte Carlo, in a wide range of temperatures and imposed gas pressures, and results are compared with available experimental data. A potential model is used that comprises three main interactions: van der Waals, Coulomb and induced polarization by the permanent electric field in the zeolite.

Alkali-free bioactive glasses for bone regeneration

Bioactive glasses and glass-ceramics are a class of third generation biomaterials which elicit a special response on their surface when in contact with biological fluids, leading to strong bonding to living tissues. The purpose of the present study was to develop diopside based alkali-free bioactive glasses in order to achieve good sintering behaviour, high bioactivity, and a dissolution/ degradation rates compatible with the target applications in bone regeneration and tissue engineering. Another aim was to understand the structure-property relationships in the investigated bioactive glasses. In this quest, various glass compositions within the Diopside (CaMgSi2O6) – Fluorapatite (Ca5(PO4)3F) – Tricalcium phosphate (3CaO•P2O5) system have been investigated. All the glasses were prepared by melt-quenching technique and characterized by a wide array of complementary characterization techniques. The glass-ceramics were produced by sintering of glass powders compacts followed by a suitable heat treatment to promote the nucleation and crystallization phenomena. Furthermore, selected parent glass compositions were doped with several functional ions and an attempt to understand their effects on the glass structure, sintering ability and on the in vitro bio-degradation and biomineralization behaviours of the glasses was made. The effects of the same variables on the devitrification (nucleation and crystallization) behaviour of glasses to form bioactive glass-ceramics were also investigated. Some of the glasses exhibited high bio-mineralization rates, expressed by the formation of a surface hydroxyapatite layer within 1–12 h of immersion in a simulated body fluid (SBF) solution. All the glasses showed relatively lower degradation rates in comparison to that of 45S5 Bioglass®. Some of the glasses showed very good in vitro behaviour and the glasses co-doped with zinc and strontium showed an in vitro dose dependent behaviour. The as-designed bioactive glasses and glass–ceramic materials are excellent candidates for applications in bone regeneration and for the fabrication of scaffolds for tissue engineering.

Characterization of RSOA modulators in radio over fiber links

In this work physical and behavioral models for a bulk Reflective Semiconductor Optical Amplifier (RSOA) modulator in Radio over Fiber (RoF) links are proposed. The transmission performance of the RSOA modulator is predicted under broadband signal drive. At first, the simplified physical model for the RSOA modulator in RoF links is proposed, which is based on the rate equation and traveling-wave equations with several assumptions. The model is implemented with the Symbolically Defined Devices (SDD) in Advanced Design System (ADS) and validated with experimental results. Detailed analysis regarding optical gain, harmonic and intermodulation distortions, and transmission performance is performed. The distribution of the carrier and Amplified Spontaneous Emission (ASE) is also demonstrated. Behavioral modeling of the RSOA modulator is to enable us to investigate the nonlinear distortion of the RSOA modulator from another perspective in system level. The Amplitude-to-Amplitude Conversion (AM-AM) and Amplitude-to-Phase Conversion (AM-PM) distortions of the RSOA modulator are demonstrated based on an Artificial Neural Network (ANN) and a generalized polynomial model. Another behavioral model based on Xparameters was obtained from the physical model. Compensation of the nonlinearity of the RSOA modulator is carried out based on a memory polynomial model. The nonlinear distortion of the RSOA modulator is reduced successfully. The improvement of the 3rd order intermodulation distortion is up to 17 dB. The Error Vector Magnitude (EVM) is improved from 6.1% to 2.0%. In the last part of this work, the performance of Fibre Optic Networks for Distributed and Extendible Heterogeneous Radio Architectures and Service Provisioning (FUTON) systems, which is the four-channel virtual Multiple Input Multiple Output (MIMO), is predicted by using the developed physical model. Based on Subcarrier Multiplexing (SCM) techniques, four-channel signals with 100 MHz bandwidth per channel are generated and used to drive the RSOA modulator. The transmission performance of the RSOA modulator under the broadband multi channels is depicted with the figure of merit, EVM under di erent adrature Amplitude Modulation (QAM) level of 64 and 254 for various number of Orthogonal Frequency Division Multiplexing (OFDM) subcarriers of 64, 512, 1024 and 2048.

Isolation and structural characterization of fucoidans from the brown algae Fucus vesiculosus

agricultural, pharmaceutical, cosmetic or bioenergy applications. They contain bioactive compounds, namely, polysaccharides Fucoidan. These polysaccharides are mainly constituted by fucose residues and sulfate esters, and have been reported to possess a broad variety of bioactivities, such as anticoagulant, anti-thrombotic, anti-inflammatory, anti-tumor, antiviral and antioxidant. In this work, the fucoidans from brown seaweed Fucus vesiculosus from “Ria de Aveiro” were isolated and characterized in order to add value to this natural resource of the region. The polysaccharides from the algae were extracted with hot water and fractioned by ethanol precipitation and calcium chloride salts. They were further purified by using anion-exchange chromatography, allowing to separate the neutral polysaccharides (laminaranas) from those negatively charged (sulfated fucoidans and alginate). The purified polysaccharides showed high content of fucose (41 mol%) and sulfates (50 mol%), having also galactose residues (6 mol%), which confirm the presence of only sulfated fucoidans. Glycosidic linkages analysis show the presence of high amounts of terminal fucose (25%) and (1→3,4)-Fuc (26%), allowing to infer that the fucoidans were highly branched. These fucoidans are composed also by (1→2)-Fuc (14%) and (1→3)-Fuc linkages (10-16%). In this work it was also tested an alternative extraction technology, the microwave hydrodiffusion and gravity system, where it was possible to extract sugars, although in low yields. However, this methodology allowed to extract polysaccharides, constituted mainly by fucose and uronic acids, as well as mannitol, without the need to add any solvent, obtaining at the end the dry alga. The current work allowed to characterize the structure of the fucoidans isolated from “Ria de Aveiro” F. vesiculosus. The presence of high content of sulfate residues and the high branch degree of the purified fucoidans allow to infer that these polysaccharides could have potential to be studied for biomedical applications, according to their biological activities.

Comportamento e reforço de nós viga-pilar

A presente dissertação tem como principal objetivo a análise do comportamento do nó viga-pilar, com a finalidade de dimensionar uma solução de reforço sísmico a aplicar em nós de estruturas antigas de betão armado. Uma parte considerável das construções em betão armado construídas em Portugal até 1970 são muito frágeis relativamente às ações sísmicas. Devido a este fato, os edifícios estão associados a uma conceção desajustada face à regulamentação atual pois à época não estava prevista a consideração de ações sísmicas na execução dos projetos de estruturas. Nesse período, era prática comum na construção o uso de armadura lisa conjugada com uma má pormenorização das armaduras e baixa resistência mecânica do betão. Tal levava a que as estruturas de betão armado construídas em Portugal até à década de setenta, possuírem uma baixa capacidade para resistir a solicitações cíclicas, como as induzidas pelos sismos. Os nós viga-pilar das estruturaras de betão armado são considerados as zonas mais crítica e vulnerável a ações sísmicas. Por isso é frequente em estruturas antigas, a necessidade de as reforçar, para melhorar a performance do edifício durante os sismos. Têm sido estudadas por investigadores várias técnicas e soluções para reforçar os nós viga-pilar de estruturas antigas de betão armado. Serão analisados nesta dissertação os danos observados em dois nós viga-pilar ensaiados experimentalmente, onde são simuladas as ações cíclicas horizontais dos sismos. Com base nestes dados, é proposta e detalhada uma solução de reforço para melhorar o comportamento histerético dessa ligações, de forma a conferir uma maior capacidade resistente e/ou ductilidade.