Softened C-H modes of adsorbed methyl and their implications for dehydrogenation: An ab initio study

To investigate the softening of CH vibrational frequencies and their implications for dehydrogenation of adsorbed hydrocarbons, an issue of scientific and technological importance, density functional theory calculations have been performed on the chemisorption and dehydrogenation of CH3 on Cu(111) and Pt(111) surfaces. By comparing these results with those of Ni(111) we find that the CH bonds of the adsorbate, when close enough, interact with metal atoms of the surface. It is this interaction and its associated lengthening and weakening of CH bonds that is the physical origin of mode softening. We rule out the possibility of a relationship between the mere presence of mode softening and dehydrogenation. We do show, however, that there is a clear relationship between the extent to which a surface can induce mode softening and the activation energy to dehydrogenation. In addition, periodic trends concerning the extent of mode softening are reproduced. (C) 2001 American Institute of Physics.

Physicochemical Characterization of Poly(ethylene glycol) Plasticized Poly(methyl vinyl ether-co-maleic acid) Films

The influence of the poly(ethylene glycol) (PEG) plasticizer content and molecular weight on the physicochemical properties of films cast from aqueous blends of poly(methyl vinyl ether-co-maleic acid) (PMVE/MA) was investigated with tensile mechanical testing, thermal analysis, and attenuated total reflectance/Fourier transform infrared spectroscopy. Unplasticized films and those containing high copolymer contents were very difficult to handle and proved difficult to test. PEG with a molecular weight of 200 Da was the most efficient plasticizer. However, films cast from aqueous blends containing 10% (w/w) PMVE/MA and either PEG 1000 or PEG 10,000 when the copolymer/plasticizer ratio was 4 : 3 and those cast from aqueous blends containing 15% (w/w) PMVE/MA and either PEG 1000 or PEG 10,000 when the copolymer/plasticizer ratio was 2 : 1 possessed mechanical properties most closely mimicking those of a formulation we have used clinically in photodynamic therapy. Importantly, we found previously that films cast from aqueous blends containing 10% (w/w) PMVE/MA performed rather poorly in the clinical setting, where uptake of moisture from patients' skin led to reversion of the formulation to a thick gel. Consequently, we are now investigating films cast from aqueous blends containing 15% (w/w) PMVE/MA and either PEG 1000 or PEG 10,000, where the copolymer/plasticizer ratio is 2 : 1, as possible Food and Drug Administration approved replacements for our current formulation, which must currently be used only on a named patient basis as its plasticizer, tripropylene glycol methyl ether, is not currently available in pharmaceutical grade

Mercuric bis(N-imino-methyl-formamidate), Hg(Imf)(2)

Single crystals of mercuric bis(N-imino-methyl-formamidate), Hg(Imf)(2), were obtained from aqueous solutions of 1,2,4-triazole and Hg(NO3)(2)center dot 2H(2)O. The crystal structure [monoclinic, P2(1)/c (no. 14), a = 499.6(2), b = 1051.2(4), c = 711.1(3) pm, beta = 117.55(1)degrees, Z = 2, R, for 890 reflections with I-0 > 2 sigma(I-0): 0.0369] contains linear centrosymmetric Hg(Imf)(2) molecules with Hg-N distances of only 203.5(7)pm. Two plus two intra- and intermolecular nitrogen atoms add to an effective coordination number of 6.

Synthesis of isomeric polyacetylenes based on natural hydroxy matricaria esters

The construction of a library of natural and related polyacetylenes using a convergent synthetic strategy based on a palladium mediated cross-coupling reaction is described. The systematic synthetic study led to all possible alkene isomers of the hydroxy matricaria esters 29-32, and the corresponding tiglates 1-4. The synthesis of many of these compounds is described for the first time.

Effect of temperature and mixing conditions on quality and consistency of poly(methyl methacrylate) bone cement

The mixing of poly(methyl methacrylate) (PMMA) bone cement has been studied to develop methods for preparing a consistently high quality cement. A novel droplet test experimental procedure was developed that characterised the wetting characteristics involved in bone cement mixing. Using this technique it was established that increased wetting occurred by mixing bone cement at a lower temperature (-28 degreesC) than normal mixing at room temperature.

Kinetic model for the hydrolysis of lignocellulosic biomass in the ionic liquid, 1-ethyl-3-methyl-imidazolium chloride†

The kinetics of the acid-catalysed hydrolysis of cellobiose in the ionic liquid 1-ethyl-3-methylimidazolium chloride, [C(2)mim]Cl, was studied as a model for general lignocellulosic biomass hydrolysis in ionic liquid systems. The results show that the rate of the two competing reactions, polysaccharide hydrolysis and sugar decomposition, vary with acid strength, and that for acids with an aqueous pK(a) below approximately zero, the hydrolysis reaction is significantly faster than the degradation of glucose, thus allowing hydrolysis to be performed with a high selectivity in glucose. In tests with soluble cellulose, hemicellulose (xylan), and lignocellulosic biomass (Miscanthus grass), comparable hydrolysis rates were observed with bond scission occurring randomly along the biopolymer chains, in contrast to end-group hydrolysis observed with aqueous acids.

The structure of [Co(H-tptz)Cl-3] center dot H2O (tptz=2,4,6-tri(2-pyridyl)-1,3,5-triazine) prepared by crystallization from the ionic liquid, N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide

The structure of tris-chloro[2,6-bis(2'-pyridyl)-4-(2'-pyridinium)-1,3,5-triazine]cobalt(II) monohydrate, [Co(C18H13N6)Cl-3]center dot H2O (C2/c (No. 15), a = 7.783(11), b = 22.42(3), c = 11.001(15) angstrom, beta = 90.05(2)degrees), crystallized from the open air reaction of CoCl2 and 2,4,6-tri(2-pyridyl)-1,3,5-triazine in the ionic liquid, N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide is reported. The structure consists of six coordinate cobalt in an octahedral geometry bonded to the tridentate tptz ligand and three chlorines. The non-coordinating pyridyl group in the tptz ligand is protonated (with the protonated nitrogen crystallographically disordered over two possible sites), providing overall charge neutrality for the complex.

Application of ionic liquids as plasticizers for poly(methyl methacrylate)

The room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, [C(4)mim][PF6] was found to be an efficient plasticizer for poly( methyl methacrylate), prepared by in situ radical polymerization in the ionic liquid medium; the polymers have physical characteristics comparable with those containing traditional plasticizers and retain greater thermal stability.

Efficient, halide free synthesis of new, low cost ionic liquids: 1,3-dialkylimidazolium salts containing methyl- and ethyl-sulfate anions

New low-cost ionic liquids containing methyl- and ethyl-sulfate anions can be easily and efficiently prepared under ambient conditions by the reaction of 1-alkylimidazoles with dimethyl sulfate and diethyl sulfate. The preparation and characterization of a series of 1,3-dialkylimidazolium alkyl sulfate and 1,2,3-trialkylimidazolium alkyl sulfate salts are reported. 1,3-Dialkylimidazolium salts containing at least one non-methyl N-alkyl substituent are liquids at, or below room, temperature. Three salts were crystalline at room temperature, the single crystal X-ray structure of 1,3-dimethylimidazolium methyl sulfate was determined and shows the formation of discrete ribbons comprising of two anion-cation hydrogen-bonded chains linked via intra-chain hydrogen-bonding, but little, or no inter-ribbon hydrogen-bonding. The salts are stable, water soluble, inherently 'chloride-free', display an electrochemical window of greater than 4 V, and can be used as alternatives to the corresponding halide salts in metathesis reactions to prepare other ionic liquids including 1-butyl-3-methylimidazolium hexafluorophosphate.

Ionic liquid as plasticizer for europium(III)-doped luminescent poly(methyl methacrylate) films

Flexible luminescent polymer films were obtained by doping europium(III) complexes in blends of poly(methyl methacrylate) (PMMA) and the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C(6)mim][Tf2N]. Different europium(III) complexes have been incorporated in the polymer/ionic liquid matrix: [C(6)mim][Eu(nta)(4)], [C(6)mim][Eu(tta)(4)], [Eu(tta)(3)(phen)] and [choline](3)[Eu(dpa)(3)], where nta is 2-naphthoyltrifluoroacetonate, tta is 2-thenoyltrifluoroacetonate, phen is 1,10-phenanthroline, dpa is 2,6-pyridinedicarboxylate ( dipicolinate) and choline is the 2-hydroxyethyltrimethyl ammonium cation. Bright red photoluminescence was observed for all the films upon irradiation with ultraviolet radiation. The luminescent films have been investigated by high-resolution steady-state luminescence spectroscopy and by time-resolved measurements. The polymer films doped with beta-diketonate complexes are characterized by a very intense D-5(0) -> F-7(2) transition ( up to 15 times more intense than the D-5(0) -> F-7(1)) transition, whereas a marked feature of the PMMA films doped with [choline](3)[Eu(dpa)(3)] is the long lifetime of the D-5(0) excited state (1.8 ms).

Chemoenzymatic synthesis of the carbasugars carba-beta-L-galactopyranose, carba-beta-L-talopyranose and carba-alpha-L-talopyranose from methyl benzoate

The cis-dihydrodiol metabolite from methyl benzoate has been used as a synthetic precursor of carba-beta-L-galactopyranose, carba-beta-L-talopyranose and carba-alpha-L-talopyranose. The structures and absolute configurations of these carbasugars were determined by a combination of NMR spectroscopy, stereochemical correlation and X-ray crystallography.

Delivery of Methylene Blue and meso-tetra (N-methyl-4-pyridyl) porphine tetra tosylate from cross-linked poly(vinyl alcohol) hydrogels: A potential means of photodynamic therapy of infected wounds

Poly(vinyl alcohol)-borate complexes were evaluated as a potentially novel drug delivery platform suitable for in vivo use in photodynamic antimicrobial chemotherapy (PACT) of wound infections. An optimised formulation (8.0%w/w PVA, 2.0% w/w borax) was loaded with 1.0 mg ml(-1) of the photosensitisers Methylene Blue (MB) and meso-tetra (N-methyl-4-pyridyl) porphine tetra tosylate (TMP). Both drugs were released to yield receiver compartment concentrations (>5.0 mu g ml(-1)) found to be phototoxic to both planktonic and bicifilm-grown methicillin-resistant Staphylococcus aureus (MRSA), a common cause of wound infections in hospitals. Newborn calf serum, used to simulate the conditions prevalent in an exuding wound, did not adversely affect the properties of the hydrogels and had no significant effect on the rate of TMP-mediated photodynamic kill of MRSA, despite appreciably reducing the fluence rate of incident light. However, MB-mediated photodynamic kill of MRSA was significantly reduced in the presence of calf serum and when the clinical isolate was grown in a biofilm. Results support the contention that delivery of MB or TMP using gel-type vehicles as part of PACT could make a contribution to the photodynamic eradication of MRSA from infected wounds. (C) 2009 Elsevier B.V. All rights reserved.

New members of the chiral pool:  -hydroxypiperidine carboxylates from bakers' yeast reductions of the corresponding keto-esters.

. Knight, David W.; Lewis, Neil; Share, Andrew C.; Haigh, David. Chem. Dept., Univ. of Nottingham, Nottingham, UK. Tetrahedron: Asymmetry (1993), 4(4), 625-8. CODEN: TASYE3 ISSN: 0957-4166. Journal written in English. CAN 120:54423 AN 1994:54423 CAPLUS (Copyright (C) 2009 ACS on SciFinder (R)) Abstract Redn. of the keto-piperidinecarboxylates I and II with fermenting bakers' yeast produced the corresponding hydroxy-esters III and IV in good yields with >99% diastereomeric excess and >93% enantiomeric excess in both cases.

Anomalous fluorinations of 3-aryl-2-hydroxypropanoic esters by diethylaminosulfur trifluoride (DAST).

Anomalous fluorinations of 3-aryl-2-hydroxypropanoic esters by diethylaminosulfur trifluoride (DAST). Haigh, David; Jefcott, Lee J.; Magee, Katherkine; McNab, Hamish. Dep. Med. chem., SmithKline Beecham Pharmaceuticals, Epsom, UK. Journal of the Chemical Society, Perkin Transactions 1: Organic and Bio-Organic Chemistry (1996), (24), 2895-2900. Publisher: Royal Society of Chemistry, CODEN: JCPRB4 ISSN: 0300-922X. Journal written in English. CAN 126:143928 AN 1997:56534 CAPLUS (Copyright (C) 2009 ACS on SciFinder (R)) Abstract Treatment of 3-aryl-2-hydroxypropanoic esters with diethylaminosulfur trifluoride (DAST) gives considerable amts. of rearranged 2-aryl-3-fluoropropanoic esters, together with the expected products. The extent of rearrangement is dependent on solvent and on the substitution pattern of the aryl ring; the mechanism of rearrangement probably involves anchimeric assistance by the aryl group in the SN1 component of the reaction pathway. Reaction of the isomeric 3-hydroxy-2-phenylpropanoic ester shows much less rearrangement under similar conditions, and an elimination product is also obtained.