Language and literacy in mathematics: stepping stones or stumbling blocks in accelerating junior-secondary students

The authors have collaborated in the development and initial evaluation of a curriculum for mathematics acceleration. This paper reports upon the difficulties encountered with documenting student understanding using pen-and-paper assessment tasks. This leads to a discussion of the impact of students’ language and literacy on mathematical performance and the consequences for motivation and engagement as a result of simplifying the language in the tests, and extending student work to algebraic representations. In turn, implications are drawn for revisions to assessment used within the project and the language and literacy focus included within student learning experiences.

Lifecycle optimization and tradeoff analysis among competing objectives for a road corridor

While the philosophical motivation behind Civil Infrastructure Management Systems is to achieve optimal level of service at a minimum cost, the allocation of scarce resources among competing alternatives is still a matter of debate. It appears to be widely accepted that results from tradeoff analysis can be measured by the degree of accomplishment of the objectives. Road management systems not only deal with different asset types but also with conflicting objectives. This paper presents a case study of lifecycle optimization with tradeoff analysis for a road corridor in New Brunswick. Objectives of the study included condition of bridge and roads and road safety. A road safety index was created based on potential for improvement. Road condition was based on roughness, rutting and cracking. Initial results show lack of sustainability in bridge performance. Therefore, bridges where broken by components: deck, superstructure and substructure. Visual inspections, in addition to construction age of each bridge, were combined to generate a surrogate apparent age. Two life cycle analysis were conducted; one aimed to minimize overall cost while achieving sustainable results and another one purely for optimization. -used to identify required levels of budget. Such analyses were used to identify the minimum required budget and to demonstrate that with the same amount of money it was possible to achieve better levels of performance. Dominance and performance driven criteria were combined to identify and select an optimal result. It was found that achievement of optimally sustained results is conditioned by the availability of treatments for all asset classes at across their life spans. For the case study a disaggregated bridge condition index was introduced to the original algorithm to attempt to achieve sustainability in all bridges components, however lack of early stage treatments for substructures produce declining trends for such a component.

Psychological determinants of motorcycle helmet use among young adults in Cambodia

Cambodian accident statistics show that motivating motorcyclists to make proper use of a safety helmet is a top priority for road safety policy makers. Yet, currently there is no insight whatsoever in the psychological precursors of helmet use in Cambodia. As such, it remains unclear which variables to target by interventions aimed at promoting the use of safety helmets. Therefore, this study adopted a socio-cognitive perspective towards the examination of helmet use in a sample of Cambodian young adults (N = 344). Two theoretical models, i.e., Health Belief Model and Theory of Planned Behaviour were combined and further complemented with two norm-related variables, i.e., descriptive- and personal norm. Based on the results, two important conclusions can be drawn. Firstly, the sample investigated in this study is clearly favourably disposed towards the use of helmets while riding. Secondly, in decreasing order, helmet use behaviour was found to be determined by the following five key-determinants: perceived behavioural control over a specific set of inhibiting situational factors (i.e., mostly when driving short distances, at night, or when dressed up to go out), perceived behavioural control in general, perceived susceptibility, personal norm, and behavioural intentions. Policy makers are recommended to reevaluate their current behavioural change methods for young adults being favourably disposed towards the use of safety helmets. Rather than focussing on motivation-oriented methods, there is a need for strategies that (1) stimulate the translation of good intentions into the desirable behaviour and (2) encourage young adults not to relapse in case they are exposed to risk facilitating circumstances. These implications will be discussed more in detail.

Literacy and numeracy project: Final report 2009

Literacy and numeracy are critical for young people during and after their schooling. The subjects and courses that students undertake during their school years incorporate a range of academic literacy and numeracy practices which students must be able manage if they are to be successful. Pathways beyond schooling also require specific, and changing, understandings of, and proficiencies with, literacy and numeracy as new communication technologies increasingly impact on further study, work, and everyday life. Teaching and learning numeracy is a new emphasis in the SACE and as yet we have little understanding about the ways in which secondary schools handle this area. Students in Years 10 and 11 are at a crucial point in their educational and life pathways as they begin to refine their future aspirations. For those who have difficulty with academic literacies and numeracies – and often a long history of such problems – this period can be fraught unless teachers are able to provide specific support when it is needed, or students are able to access it from care-givers or community members. The School to Work Literacy and Numeracy Project involved teachers from nine schools across the three sectors and university researchers working together to design curriculum interventions for students with a history of low measurable achievement in literacy and/or numeracy. The project started from the premise that working with ‘rich tasks’, an approach to learning and assessment developed in the Productive Pedagogies work undertaken in Queensland (Hayes et al., 2006), would improve students’ motivation, engagement and learning and that this work could best be done by teachers working in school-based, cross-curriculum teams with a school leadership team member and a university researcher as mentor. A key idea in designing rich tasks is that students will have opportunities to demonstrate their learning in assessments which are aligned with the learning expectations (for example a film festival to publicly launch student-produced films, advertising to sell student-made cubby-houses, a household budget based on students’ likely incomes in future work). In other words the assessments should be designed to allow for authentic communication and displays of what the students have learned through serious engagement with the curriculum. The project was conducted from Term 1-4 2009, with follow-up checks with some project teachers in the early weeks of 2010.

Recording primate vocalizations

Ornithologists have been exploring the possibilities and the methodology of recording and archiving animal sounds for many decades. Primatologists, however, have only relatively recently become aware that recordings of primate sound may be just as valuable as traditional scientific specimens such as skins or skeletons, and should be preserved for posterity (Fig. 16.1). Audio recordings should be fully documented, archived and curated to ensure proper care and accessibility. As natural populations disappear, sound archives will become increasingly important (Bradbury et al., 1999). Studying animal vocal communication is also relevant from the perspective of behavioural ecology. Vocal communication plays a central role in animal societies. Calls are believed to provide various types and amounts of information. These may include, among other things: (1) information about the sender's identity (e.g. species, sex, age class, group membership or individual identity); (2) information about the sender's status andmood (e.g. dominance, fear or aggressive motivation, fitness); and (3) information about relevant events or discoveries in the sender's environment (e.g. predators, food location). When studying acoustic communication, sound recordings are usually required to analyse the spectral and temporal structure of vocalizations or to perform playback experiments (Chapter 11)...

On the topic of competency and excellence of our graduate engineers

Problem solving is an essential element of civil engineering education. It has been I observed that students are best able to understand civil engineering theory when there is a ' practical application of it. Teaching theory alone has led to lower levels of comprehension and motivation and a correspondingly higher rate of failure and "drop-out". This paper analyses the effectiveness of introducing practical design projects at an early stage within a civil engineering undergraduate program at Queensland University of Technology. In two of the essential basic subjects, Engineering Mechanics and Steel Structures, model projects which simulate realistic engineering exercises were introduced. Students were required to work in small groups to analyse, design and build the lightest I most efficient model bridges made of specific materials such as spaghetti, drinking straw, paddle pop sticks and balsa wood and steel columns for a given design loading/target capacity. The paper traces the success of the teaching strategy at each stage from its introduction through to the final student and staff evaluation.

Improving the teaching and learning of steel structural design

Engineering students are best able to understand theory when one explains it in relation to realistic problems and its practical applications. Teaching theory in isolation has led to lower levels of comprehension and motivation and a correspondingly higher rate of failure. At Queensland University of Technology, a number of new methods have been introduced recently to improve the teaching and learning of steel structural design at undergradt1ate level. In the basic steel structures subject a project-based teaching method was introduced in which the students were required to analyse, design and build the lightest I most efficient steel columns for a given target capacity. A design assignment involving simple, but real structures was also introduced in the basic steel structures subject. Both these exercises simulated realistic engineering problems from the early years of the course and produced a range of benefits. Improvements to the teaching and learning was also made through integration of a number of related structural engineering subjects and by the introduction of animated computer models and laboratory models. This paper presents the details of all these innovative methods which improved greatly the students' understanding of the steel structures design process.

Project-based civil engineering courses

Problem solving is an essential element of civil engineering education. It has been observed that students are best able to understand civil engineering theory when there is a practical application of it. Teaching theory alone has led to lower levels of comprehension and motivation and a correspondingly higher rate of failure and “drop-out”. This paper analyses the effectiveness of introducing practical design projects at an early stage within a civil engineering undergraduate program at Queensland University of Technology. In two of the essential basic subjects, Engineering Mechanics and Steel Structures, model projects which simulate realistic engineering exercises were introduced. Students were required to work in small groups to analyse, design and build the lightest / most efficient model bridges made of specific materials such as spaghetti, drinking straw, paddle pop sticks and balsa wood and steel columns for a given design loading/target capacity. The paper traces the success of the teaching strategy at each stage from its introduction through to the final student and staff evaluation.

Reducing workplace safety incidents : bridging the gap between safety culture theory and practice

This thesis explored safety culture in a large Australasian construction and mining organisation, with a view to understanding how theory and practice can be integrated to improve safety culture and related outcomes within the industry. The research comprised three studies that investigated the relationship between safety culture, safety motivation, leadership and safety behaviour, and examined differences in perceptions of safety culture across the organisation. Research methodologies and samples included a modified Delphi method with safety leaders (n=41), a quantitative survey with a cross-section of the organisation (n=2,957), and group interviews with frontline supervisors and workers (n=29).

‘Works well with others’ : examining the different types of small group learning approaches and their implications for law student learning outcomes

In the current regulatory climate, there is increasing expectation that law schools will be able to demonstrate students’ acquisition of learning outcomes regarding collaboration skills. We argue that this is best achieved through a stepped and structured whole-of-curriculum approach to small group learning. ‘Group work’ provides deep learning and opportunities to develop professional skills, but these benefits are not always realised for law students. An issue is that what is meant by ‘group work’ is not always clear, resulting in a learning regime that may not support the attainment of desired outcomes. This paper describes different types of ‘group work', each associated with distinct learning outcomes. It suggests that ‘group work’ as an umbrella term to describe these types is confusing, as it provides little indication to students and teachers of the type of learning that is valued and is expected to take place. ‘Small group learning’ is a preferable general descriptor. Identifying different types of small group learning allows law schools to develop and demonstrate a scaffolded, sequential and incremental approach to fostering law students’ collaboration skills. To support learning and the acquisition of higherorder skills, different types of small group learning are more appropriate at certain stages of the program. This structured approach is consistent with social cognitive theory, which suggests that with the guidance of a supportive teacher, students can develop skills and confidence in one type of activity which then enhances motivation to participate in another.

Understanding victim behaviour through offender behaviour typologies

Criminology has long sought to define and understand criminal motivations. There has, however, been less attention paid to the motivations involved in “everyday” thought and behaviour that may place someone in harm’s way. This doesn’t mean that victims are somehow motivated to become victims, but they may behave in such a way that victimisation happens as a matter of course. In the parlance of victimity, victim behaviour has often been referred to as either “victim facilitated” or “victim precipitated”. However, while some use these terms to explain the role of victim behaviour in relation to harm or loss, they actually do little to further our knowledge about the cognitive and behavioural milieu in which victimisation occurs. For example, a victim of homicide may precipitate the attack by violently confronting a partner (in retaliation for real or imagined wrongs). Another victim may facilitate domestic violence by not leaving their partner for financial reasons (“cannot afford to go out on my own”). Far from blaming the victim, understanding the motivational nature of victim behaviour can be accomplished by juxtaposing motivations for offender behaviour. This presentation applies offender motivations to victim behaviours, and presents anecdotal and research support for this approach.

Are you on board? The role of design-led innovation in strengthening key partnerships within an Australian airport

A popular lexicon for announcing partnerships within aviation is being ‘on-board’. Like boarding a plane, business partnerships requires trust in the expertise and the philosophy of another organisation. This paper reports upon the process and findings from the completion of a customer engagement project within a leading Australian Airport, as part of the wider uptake of design-led innovation. The project was completed bilaterally with Airport Corporation and prominent retail business partner undertaking a design-led approach to collaboratively explore an observed market trend affecting the performance of both businesses. A design-led catalyst facilitated the completion of this project, working within the Airport Corporation to disseminate the skills and philosophy of design over an 18 month period using an action research method. Findings reveal that the working environment necessary for design to be utilised requires; trust in the design-led approach as a new and exploratory way of completing work; leadership within the execution and delivery of project deliverables, and; a shared intrinsic motivation to develop new skills through a design-led approach which challenges a business-as-usual mentality (BAU). Design-led innovation can be deployed specifically to strengthen business partnerships through collaborative and explorative customer engagement.

A framework for analysing creative activity within puzzle-game play experiences

This thesis is an analyzing creative processes that can be fostered through computer gaming. Outcomes from the research build on our knowledge of how computer games foster creative thinking. The research proposes guidelines that build upon our understanding of the relationship between the creative processes that players undertake during a game and the components of the game that allow these processes to occur. These guidelines may be used in the game design process to better facilitate creative gameplay activity. A significant research contribution is the ability to create games that facilitate creative thinking through engaging interactions with technology.

The effect of autonomy transparency in human-robot interactions : a preliminary study on operator cognitive workload and situation awareness in multiple heterogeneous UAV management

The autonomous capabilities in collaborative unmanned aircraft systems are growing rapidly. Without appropriate transparency, the effectiveness of the future multiple Unmanned Aerial Vehicle (UAV) management paradigm will be significantly limited by the human agent’s cognitive abilities; where the operator’s CognitiveWorkload (CW) and Situation Awareness (SA) will present as disproportionate. This proposes a challenge in evaluating the impact of robot autonomous capability feedback, allowing the human agent greater transparency into the robot’s autonomous status - in a supervisory role. This paper presents; the motivation, aim, related works, experiment theory, methodology, results and discussions, and the future work succeeding this preliminary study. The results in this paper illustrates that, with a greater transparency of a UAV’s autonomous capability, an overall improvement in the subjects’ cognitive abilities was evident, that is, with a confidence of 95%, the test subjects’ mean CW was demonstrated to have a statistically significant reduction, while their mean SA was demonstrated to have a significant increase.

Curiosity driven reinforcement learning for motion planning on humanoids

Most previous work on artificial curiosity (AC) and intrinsic motivation focuses on basic concepts and theory. Experimental results are generally limited to toy scenarios, such as navigation in a simulated maze, or control of a simple mechanical system with one or two degrees of freedom. To study AC in a more realistic setting, we embody a curious agent in the complex iCub humanoid robot. Our novel reinforcement learning (RL) framework consists of a state-of-the-art, low-level, reactive control layer, which controls the iCub while respecting constraints, and a high-level curious agent, which explores the iCub's state-action space through information gain maximization, learning a world model from experience, controlling the actual iCub hardware in real-time. To the best of our knowledge, this is the first ever embodied, curious agent for real-time motion planning on a humanoid. We demonstrate that it can learn compact Markov models to represent large regions of the iCub's configuration space, and that the iCub explores intelligently, showing interest in its physical constraints as well as in objects it finds in its environment.