An efficient eAuction potocol

A secure protocol for electronic, sealed-bid, single item auctions is presented. The protocol caters to both first and second price (Vickrey) auctions and provides full price flexibility. Both computational and communication cost are linear with the number of bidders and utilize only standard cryptographic primitives. The protocol strictly divides knowledge of the bidder's identity and their actual bids between, respectively, a registration authority and an auctioneer, who are assumed not to collude but may be separately corrupt. This assures strong bidder-anonymity, though only weak bid privacy. The protocol is structured in two phases, each involving only off-line communication. Registration, requiring the use of the public key infrastructure, is simultaneous with hash-sealed bid-commitment and generates a receipt to the bidder containing a pseudonym. This phase is followed by encrypted bid-submission. Both phases involve the registration authority acting as a communication conduit but the actual message size is quite small. It is argued that this structure guarantees non-repudiation by both the winner and the auctioneer. Second price correctness is enforced either by observing the absence of registration of the claimed second-price bid or, where registered but lower than the actual second price, is subject to cooperation by the second price bidder - presumably motivated through self-interest. The use of the registration authority in other contexts is also considered with a view to developing an architecture for efficient secure multiparty transactions

Optimal Bayesian experimental design for models with intractable likelihoods using indirect inference applied to biological process models

This paper addresses the problem of determining optimal designs for biological process models with intractable likelihoods, with the goal of parameter inference. The Bayesian approach is to choose a design that maximises the mean of a utility, and the utility is a function of the posterior distribution. Therefore, its estimation requires likelihood evaluations. However, many problems in experimental design involve models with intractable likelihoods, that is, likelihoods that are neither analytic nor can be computed in a reasonable amount of time. We propose a novel solution using indirect inference (II), a well established method in the literature, and the Markov chain Monte Carlo (MCMC) algorithm of Müller et al. (2004). Indirect inference employs an auxiliary model with a tractable likelihood in conjunction with the generative model, the assumed true model of interest, which has an intractable likelihood. Our approach is to estimate a map between the parameters of the generative and auxiliary models, using simulations from the generative model. An II posterior distribution is formed to expedite utility estimation. We also present a modification to the utility that allows the Müller algorithm to sample from a substantially sharpened utility surface, with little computational effort. Unlike competing methods, the II approach can handle complex design problems for models with intractable likelihoods on a continuous design space, with possible extension to many observations. The methodology is demonstrated using two stochastic models; a simple tractable death process used to validate the approach, and a motivating stochastic model for the population evolution of macroparasites.

Plasma-enabled, catalyst-free growth of carbon nanotubes on mechanically-written Si features with arbitrary shape

Simple, rapid, catalyst-free synthesis of complex patterns of long, vertically aligned multiwalled carbon nanotubes, strictly confined within mechanically-written features on a Si(1 0 0) surface is reported. It is shown that dense arrays of the nanotubes can nucleate and fully fill the features when the low-temperature microwave plasma is in a direct contact with the surface. This eliminates additional nanofabrication steps and inevitable contact losses in applications associated with carbon nanotube patterns. Using metal catalyst has long been considered essential for the nucleation and growth of surface-supported carbon nanotubes (CNTs) [1] and [2]. Only very recently, the possibility of CNT growth using non-metallic (e.g., oxide [3] and SiC [4]) catalysts or artificially created carbon-enriched surface layers [5] has been demonstrated. However, successful integration of carbon nanostructures into Si-based nanodevice platforms requires catalyst-free growth, as the catalyst nanoparticles introduce contact losses, and their catalytic activity is very difficult to control during the growth [6]. Furthermore, in many applications in microfluidics, biological and molecular filters, electronic, sensor, and energy conversion nanodevices, the CNTs need to be arranged in specific complex patterns [7] and [8]. These patterns need to contain the basic features (e.g., lines and dots) written using simple procedures and fully filled with dense arrays of high-quality, straight, yet separated nanotubes. In this paper, we report on a completely metal or oxide catalyst-free plasma-based approach for the direct and rapid growth of dense arrays of long vertically-aligned multi-walled carbon nanotubes arranged into complex patterns made of various combinations of basic features on a Si(1 0 0) surface written using simple mechanical techniques. The process was conducted in a plasma environment [9] and [10] produced by a microwave discharge which typically generates the low-temperature plasmas at the discharge power below 1 kW [11]. Our process starts from mechanical writing (scribing) a pattern of arbitrary features on pre-treated Si(1 0 0) wafers. Before and after the mechanical feature writing, the Si(1 0 0) substrates were cleaned in an aqueous solution of hydrofluoric acid for 2 min to remove any possible contaminations (such as oil traces which could decompose to free carbon at elevated temperatures) from the substrate surface. A piece of another silicon wafer cleaned in the same way as the substrate, or a diamond scriber were used to produce the growth patterns by a simple arbitrary mechanical writing, i.e., by making linear scratches or dot punctures on the Si wafer surface. The results were the same in both cases, i.e., when scratching the surface by Si or a diamond scriber. The procedure for preparation of the substrates did not involve any possibility of external metallic contaminations on the substrate surface. After the preparation, the substrates were loaded into an ASTeX model 5200 chemical vapour deposition (CVD) reactor, which was very carefully conditioned to remove any residue contamination. The samples were heated to at least 800 °C to remove any oxide that could have formed during the sample loading [12]. After loading the substrates into the reactor chamber, N2 gas was supplied into the chamber at the pressure of 7 Torr to ignite and sustain the discharge at the total power of 200 W. Then, a mixture of CH4 and 60% of N2 gases were supplied at 20 Torr, and the discharge power was increased to 700 W (power density of approximately 1.49 W/cm3). During the process, the microwave plasma was in a direct contact with the substrate. During the plasma exposure, no external heating source was used, and the substrate temperature (∼850 °C) was maintained merely due to the plasma heating. The features were exposed to a microwave plasma for 3–5 min. A photograph of the reactor and the plasma discharge is shown in Fig. 1a and b.

Self-organized vertically aligned single-crystal silicon nanostructures with controlled shape and aspect ratio by reactive plasma etching

The formation of vertically aligned single-crystalline silicon nanostructures via "self-organized" maskless etching in Ar+ H 2 plasmas is studied. The shape and aspect ratio can be effectively controlled by the reactive plasma composition. In the optimum parameter space, single-crystalline pyramid-like nanostructures are produced; otherwise, nanocones and nanodots are formed. This generic nanostructure formation approach does not involve any external material deposition. It is based on a concurrent sputtering, etching, hydrogen termination, and atom/radical redeposition and can be applied to other nanomaterials.

Nanoscale surface and interface engineering : why plasma-aided?

This contribution provides arguments why and in which cases low-temperature plasmas should be used for nanoscale surface and interface engineering and discusses several advantages offered by plasma-based processes and tools compared to neutral gas fabrication routes. Relevant processes involve nanotexturing (etching, sputtering, nanostructuring, pre-patterning, etc.) and composition/structure control at nanoscales (phases, layering, elemental presence, doping, functionalization, etc.) and complex combinations thereof. A case study in p-Si/n-Si solar cell junction exemplifies a successful use of inductively coupled plasma-assisted RF magnetron sputtering for nanoscale fabrication of a bi-layered stack of unconventionally doped highly-crystalline silicon nanofilms with engineered high-quality interfaces.

Disentangling the cognitive components supporting Austin Maze performance in left versus right temporal lobe epilepsy

Neuropsychological tests requiring patients to find a path through a maze can be used to assess visuospatial memory performance in temporal lobe pathology, particularly in the hippocampus. Alternatively, they have been used as a task sensitive to executive function in patients with frontal lobe damage. We measured performance on the Austin Maze in patients with unilateral left and right temporal lobe epilepsy (TLE), with and without hippocampal sclerosis, compared to healthy controls. Performance was correlated with a number of other neuropsychological tests to identify the cognitive components that may be associated with poor Austin Maze performance. Patients with right TLE were significantly impaired on the Austin Maze task relative to patients with left TLE and controls, and error scores correlated with their performance on the Block Design task. The performance of patients with left TLE was also impaired relative to controls; however, errors correlated with performance on tests of executive function and delayed recall. The presence of hippocampal sclerosis did not have an impact on maze performance. A discriminant function analysis indicated that the Austin Maze alone correctly classified 73.5% of patients as having right TLE. In summary, impaired performance on the Austin Maze task is more suggestive of right than left TLE; however, impaired performance on this visuospatial task does not necessarily involve the hippocampus. The relationship of the Austin Maze task with other neuropsychological tests suggests that differential cognitive components may underlie performance decrements in right versus left TLE.

Anterior temporal cortex and semantic memory : reconciling findings from neuropsychology and functional imaging

Studies of semantic impairment arising from brain disease suggest that the anterior temporal lobes are critical for semantic abilities in humans; yet activation of these regions is rarely reported in functional imaging studies of healthy controls performing semantic tasks. Here, we combined neuropsychological and PET functional imaging data to show that when healthy subjects identify concepts at a specific level, the regions activated correspond to the site of maximal atrophy in patients with relatively pure semantic impairment. The stimuli were color photographs of common animals or vehicles, and the task was category verification at specific (e.g., robin), intermediate (e.g., bird), or general (e.g., animal) levels. Specific, relative to general, categorization activated the antero-lateral temporal cortices bilaterally, despite matching of these experimental conditions for difficulty. Critically, in patients with atrophy in precisely these areas, the most pronounced deficit was in the retrieval of specific semantic information.

Introspective service interface synthesis in business networks

Service mismatches involve the adaptation of structural and behavioural interfaces of services, which in practice incurs long lead times through manual, coding e ort. We propose a framework, complementary to conventional service adaptation, to extract comprehensive and seman- tically normalised service interfaces, useful for interoperability in large business networks and the Internet of Services. The framework supports introspection and analysis of large and overloaded operational signa- tures to derive focal artefacts, namely the underlying business objects of services. A more simpli ed and comprehensive service interface layer is created based on these, and rendered into semantically normalised in- terfaces, given an ontology accrued through the framework from service analysis history. This opens up the prospect of supporting capability comparisons across services, and run-time request backtracking and ad- justment, as consumers discover new features of a service's operations through corresponding features of similar services. This paper provides a rst exposition of the service interface synthesis framework, describing patterns having novel requirements for unilateral service adaptation, and algorithms for interface introspection and business object alignment. A prototype implementation and analysis of web services drawn from com- mercial logistic systems are used to validate the algorithms and identify open challenges and future research directions.

Safer driving agreements in the Australian context : can they be effective?

Prior research suggests that greater parental involvement in the safety and learning of their young novice driver can have a positive impact on their child’s safety. Safer driving agreements, which typically involve a formal statement of driving conditions and restrictions ratified by a driver and another party, most often parents, are an increasingly common initiative to enhance young novice driver safety. However, there are few formal evaluations of such initiatives and the limited available research suggests only modest differences in traffic violations, and minimal impacts on crash involvement. The current paper reports on an assessment of the potential efficacy of safer driving agreements in the Australian context, via a literature review and extensive stakeholder and community consultations. Specifically, discussions were conducted with an expert panel of United States researchers and program developers; a survey was completed with Australian police, transport and motoring stakeholders; and focus groups and surveys were completed with young drivers and parents. Overall, results suggested mixed understanding of, and support for, safer driving agreements in Australia, with issues relating to voluntary participation and accurate monitoring of behaviour cited as major barriers. Indeed, the potential effectiveness of the initiative was largely perceived as being limited to those young drivers who are already safety conscious, and as being dependent on existing strong relationships with parents (e.g., trust, honesty and respect). Implications of the study and recommendations for future research are discussed.

A review of modern computational algorithms for Bayesian optimal design

Bayesian experimental design is a fast growing area of research with many real-world applications. As computational power has increased over the years, so has the development of simulation-based design methods, which involve a number of algorithms, such as Markov chain Monte Carlo, sequential Monte Carlo and approximate Bayes methods, facilitating more complex design problems to be solved. The Bayesian framework provides a unified approach for incorporating prior information and/or uncertainties regarding the statistical model with a utility function which describes the experimental aims. In this paper, we provide a general overview on the concepts involved in Bayesian experimental design, and focus on describing some of the more commonly used Bayesian utility functions and methods for their estimation, as well as a number of algorithms that are used to search over the design space to find the Bayesian optimal design. We also discuss other computational strategies for further research in Bayesian optimal design.

Non-separability and substitutability among water pollutants : evidence from India

The design and implementation of environmental policy often involve more than one pollutant, and must consider pollution as a byproduct of the production of marketable output. In this paper, we test the implicit assumption in the empirical literature that (1) production of marketable output, pollution and abatement are separable, and (2) different pollutants can be abated separately. Using unique plant-level data in India, we reject the null hypotheses of separability between marketable output and pollutants, and between different pollutants. Firms must incur abatement costs for reducing pollution levels. In addition, complement and substitute relationships between water pollutants are demonstrated with statistical significance.

Women and ADR

Alternative dispute resolution, or ‘ADR’, is defined by the National Alternative Dispute Resolution Advisory Council as: … an umbrella term for processes, other than judicial determination, in which an impartial person assists those in a dispute to resolve the issues between them. ADR is commonly used as an abbreviation for alternative dispute resolution, but can also be used to mean assisted or appropriate dispute resolution. Some also use the term ADR to include approaches that enable parties to prevent or manage their own disputes without outside assistance. A broad range of ADR processes are used in legal practice contexts, including, for example, arbitration, conciliation, mediation, negotiation, conferencing, case appraisal and neutral evaluation. Hybrid processes are also used, such as med-arb in which the practitioner starts by using mediation, and then shifts to using arbitration. ADR processes generally fall into one of three general categories: facilitative, advisory or determinative. In a facilitative process, the ADR practitioner has the role of assisting the parties to reach a mutually agreeable outcome to the dispute by helping them to identify the issues in dispute, and to develop a range of options for resolving the dispute. Mediation and facilitated negotiation are examples of facilitative processes. ADR processes that are advisory involve the practitioner appraising the dispute, providing advice as to the facts of the dispute, the law and then, in some cases, articulating possible or appropriate outcomes and how they might be achieved. Case appraisal and neutral evaluation are examples of advisory processes. In a determinative ADR process, the practitioner evaluates the dispute (which may include the hearing of formal evidence from the parties) and makes a determination. Arbitration is an example of a determinative ADR process. The use of ADR processes has increased significantly in recent years. Indeed, in a range of contemporary legal contexts the use of an ADR process is now required before a party is able to file a matter in court. For example, Juliet Behrens discusses in Chapter 11 of this book how the Family Law Act 1975 (Cth) now effectively mandates attendance at pre-filing family dispute resolution in parenting disputes. At the state level, in Queensland, for example, attendance at a conciliation conference can be required in anti-discrimination matters, and is encouraged in residential tenancy matters, and in personal injuries matters the parties must attend a preliminary compulsory conference. Certain ADR processes are used more commonly in the resolution of particular disputes. For example, in family law contexts, mediation and conciliation are generally used because they provide the parties with flexibility in terms of process and outcome while still ensuring that the negotiations occur in a positive, structured and facilitated framework. In commercial contexts, arbitration and neutral evaluation are often used because they can provide the parties with a determination of the dispute that is factually and legally principled, but which is also private and more timely than if the parties went to court. Women, as legal personalities and citizens of society, can find themselves involved in any sort of legal dispute, and therefore all forms of ADR are relevant to women. Perhaps most commonly, however, women come into contact with facilitative ADR processes. For example, through involvement in family law disputes women will encounter family dispute resolution processes, such as mediation. In this chapter, therefore, the focus is on facilitative ADR processes and, particularly, issues for women in terms of their participation in such processes. The aim of this chapter is to provide legal practitioners with an understanding of issues for women in ADR to inform your approach to representing women clients in such processes, and to guide you in preparing women clients for their participation in ADR. The chapter begins with a consideration of the ways in which facilitative ADR processes are positive for women participants. Next, some of the disadvantages for women in ADR are explored. Finally, the chapter offers ways in which legal practitioners can effectively prepare women clients for participation in ADR. Before embarking on a discussion of issues for women in ADR, it is important to acknowledge that women’s experiences in these dispute resolution environments, whilst often sharing commonalities, are diverse and informed by a range of factors specific to each individual woman; for example, her race or socio-economic background. This discussion, therefore, addresses some common issues for women in ADR that are fundamentally gender based. It must be noted, however, that providing advice to women clients about participating in ADR processes requires legal practitioners to have a very good understanding of the client as an individual, and her particular needs and interests. Some sources of diversity are discussed in Chapters 13, 14 and 15.

Managing growth and entry strategies across borders

Should the firm move successfully into a growth or expansion phase the owner manager will be required to increase the scale and scope of its operations. Part of this expansion will involve hiring additional employees, and increasing the overall complexity of the firm's activities. It is likely that the need for greater levels of professional management will be required to operate the firm, along with the need for enhanced planning and the introduction of systems to support the new levels of complexity. The transition from a small, owner-managed firm to a large systems-managed business will require the development of a team-based management approach with greater specialisation within the management team. Corporate governance is also likely to change as the growth cycle takes place. As it grows, the business will become more formalised in its accounting, management and other systems. The need for greater quantities of capital is likely to lead the business towards equity finance. As new equity partner are taken into the company the original owner managers may find their level of control diminished. The larger the firm becomes the more likely its management structure will become decentralised with greater separation between the owner and the firm in terms of operational and financial matters.

The Proposed Commonwealth Personal Property Securities Act 2008

Inspired by similar reforms introduced in New Zealand, Canada and the United States, the Commonwealth, with the co-operation of the States, seeks in the Personal Property Securities Bill 2008 (the Bill) to introduce a central repository of recorded information reflecting particular security interests in personal property in Australia. Specifically, the interest recorded is an interest in personal property provided for by a transaction that in substance secures the payment or the performance of an obligation. In addition to providing a notification of the use of the personal property as collateral to secure the payment of monies or the performance of an obligation, the Bill proposes to introduce a regime of prioritising interests in the same collateral. Central to this prioritisation are the concepts of a ‘perfected security interests’and ‘unperfected security interests’. Relevantly, a perfected security interest in collateral has priority over an unperfected security interest in the same collateral. The proposed mechanisms rely on the fundamental integer of personal property, which is defined as any property other than land. Recognising that property may take a tangible as well as an intangible form, the Bill reflects an appreciation of the fact that some property may have a tangible form which may act as collateral, and simultaneously the same property may involve other property, intangible property in the form of intellectual property rights, which in their own right may be the subject of a‘security agreement’. An example set out in the Commentary on the Consultation Draft of the Bill (the Commentary), indicates the practical implications involving certain property which have multiple profiles for the purposes of the Bill. This submission is concerned with the presumptions made in relation to the interphase between tangible property and intangible property arising from the same personal property, as set out in s 30 of the Bill.

Enterprise Business Technology Governance: Three Competencies to Build Board Digital Leadership Capability.

The competent leadership of digital transformation needs to involve the board of directors. The reported lack of such capability in boards is becoming a pressing issue. A part of leadership in such transformation is the board of director’s competence to lead Enterprise Business Technology Governance (EBTG). In this paper we take the position that EBTG competencies are essential in boards, because competent EBTG has been shown to contribute to increased revenue, profit, and returns. We update and expand on the results of a multi-method approach to the development of a set of three board of director competencies needed for effective EBTG.