Volunteers 'piggy-backing' on their private insurance : an uncertain protection against liability

Volunteering is a very important part of life in Australia with an estimated 36% of the adult population volunteering in 2010. Voluntary work generates economic benefits, addresses community needs and develops the social networks that form the backbone of civil society. Without volunteers, many essential services would either cease to exist or become too expensive for many people to afford. These volunteers, who by definition are not in receipt of any remuneration for their work and services, are exposed to personal injury and to legal liability in the discharge of their functions. It is therefore appropriate that statutory protection is extended to volunteers and that volunteer organisations procure public liability and personal accident cover where possible. However, given the patchwork quilt of circumstances where statutory or institutional cover is available to volunteers and the existence of many and diverse exclusions, it is important to have regard also to what scope a volunteer may have to avail themselves of protection against liability for volunteering activity by relying upon their own personal insurance cover. This article considers the extent of private insurance cover and its availability to volunteers under home and contents insurance and under comprehensive motor vehicle insurance. The most common policies in the Australian market are examined and the uncertain nature of protection against liability afforded by these policies is discussed. This uncertainty could be reduced should the Federal Government through amendments to the Insurance Contracts Regulations standardise the circumstances and extent to which liability protection was afforded to an insured holding home and contents insurance and comprehensive motor vehicle insurance cover.

Conflicts over protection of marine living resources : the ‘Volga Case’ revisited

Non-traditional maritime security concerns have become more importantthan ever in the post-Cold War era. Naval forces of most developedcountries are more concerned about these threats than conventional war.One of the main maritime security issues for many countries in the world isillegal, unreported and unregulated (IUU) fishing in the marine area. Withthese burgeoning issues comes the potential for a large number of disputesinvolving international law. In early 2002, a long-line fishing vessel under aRussian flag –the Volga, was detained by Australian authorities a few hundred meters outside the Exclusive Economic Zone of Australia’s Heard and McDonald Islands in the Southern Ocean. The vessel was reportedly engaged in illegal fishing. This incident gave birth to litigation in international and Australian courts. Apart from these cases, Russia also announced separate litigation against Australia for violation of Articles 111and 87 of the United Nations Convention on the Law of the Sea (NCLOS).Considering the outcome of these cases, this article critically examines thecharacteristics of litigation as a strategy for pacific settlement of disputesover marine living resources. Using the Volga Case as an example, thisarticle explores some issues related to the judicial settlement of disputes over marine living resources. This article demonstrates that the legal certainty of winning a case may not be the only factor influencing the strategy for settlement of an international dispute.

UNCLOS and regional action for protection of the marine environment : perspectives of the South Asian Seas region

In very clear language the United Nations Convention on the Law of the Sea (UNCLOS) calls upon the parties to initiate regional action for protection of marine environment. Although the UNCLOS gives special recognition in various ways to developing countries, the South Asian developing countries continue to encounter some bottlenecks in complying with the provisions of the Convention relating to marine environment. Against this backdrop, this paper tends to examine the need for a regional approach towards conservation of marine environment. Moreover, the paper aims to explore possible ways to establish a regional legal framework for conservation of marine environment in South Asian region. In doing so, the paper critically examines existing mechanisms already in place including the South Asian Seas Programme and South Asian Seas Action Plan

Technological innovation and operational effectiveness : their role in achieving performance improvements

The purpose of this article is to examine the role of the alignment between technological innovation effectiveness and operational effectiveness after the implementation of enterprise information systems, and the impact of this alignment on the improvement in operational performance. Confirmatory factor analysis was used to examine structural relationships between the set of observed variables and the set of continuous latent variables. The findings from this research suggest that the dimensions stemming from technological innovation effectiveness such as system quality, information quality, service quality, user satisfaction and the performance objectives stemming from operational effectiveness such as cost, quality, reliability, flexibility and speed are important and significantly well-correlated factors. These factors promote the alignment between technological innovation effectiveness and operational effectiveness and should be the focus for managers in achieving effective implementation of technological innovations. In addition, there is a significant and direct influence of this alignment on the improvement of operational performance. The principal limitation of this study is that the findings are based on investigation of small sample size.

Practical issues when designing an information accountability framework for eHealth systems

This thesis is the result of an investigation into information privacy management in eHealth. It explores the applicability of accountability measures as a means of protection of eHealth consumer privacy. The thesis presented a new concept of Accountable eHealth Systems for achieving a balance between the information privacy concerns of eHealth consumers and the information access requirements of healthcare professionals and explored the social, technological and implementation aspects involved in such a system.

Bringing skills and general competences back into technological education

In this paper we show that industry-based student training is not limited to work experience; work integrated learning, internship or extended vacation work. It is also about bringing back the lost parts of technological education. We experience the unilateral focus on theoretical knowledge at the expense of skills and general competences as one important challenge in technological education. The lacking facilitation and training of practical skills and general competences in the curricula and programs are identified, but many institutions have failed to address the problem. Today’s curricula in many ways reduce technology to abstract concepts, calculations and models, and create a gap between the academic programs and the practical applications in the society. We explore two (Australia and Norway) initiatives on industry-based student training and discuss how these initiatives address and bridge the gap. We argue that these initiatives of industry-based student training contribute to bringing skills and general competences back into technological education, and that the effects are not limited to increased employability, but also include increased academic performance.

Employees' adoption of enterprise web 2.0 : the role of technological attributes

Although the adoption of Enterprise Web 2.0 within organisations is beneficial, it could meet with employees’ resistance and the adoption process can be lengthy. The successful implementation of Enterprise Web 2.0 is based on employee involvement and adoption of such social technology. This paper is part of a larger research project that explored the adoption of Web 2.0 by individuals within enterprises. Using a qualitative study, the findings show that there are number of adoption influences including technological, individual and contextual issues. This paper presents Web 2.0 technological attributes that influence its adoption. The found attributes are: friendliness, reliability, mobility, technical compatibility, discoverability, transparency and Web 2.0 type.

Recognition and enforcement of foreign judgments : are the rules appropriate?

The recognition and enforcement of foreign judgments is an aspect of private international law, and concerns situations where a successful party to litigation seeks to rely on a judgment obtained in one court, in a court in another jurisdiction. The most common example where the recognition and enforcement of foreign judgments may arise is where a party who has obtained a favourable judgment in one state or country may seek to recognise and enforce the judgment in another state or country. This occurs because there is no sufficient asset in the state or country where the judgment was rendered to satisfy that judgment. As technological advancements in communications over vast geographical distances have improved exponentially in recent years, there has been an increase in cross-border transactions, as well as litigation arising from these transactions. As a result, the recognition and enforcement of foreign judgments is of increasing importance, since a party who has obtained a judgment in cross-border litigation may wish to recognise and enforce the judgment in another state or country, where the defendant’s assets may be located without having to re-litigate substantive issues that have already been resolved in another court. The purpose of the study is to examine whether the current state of laws for the recognition and enforcement of foreign judgments in Australia, the United States and the European Community are in line with modern-commercial needs. The study is conducted by weighing two competing objectives between the notion of finality of litigation, which encourages courts to recognise and enforce judgments foreign to them, on the one hand, and the adequacy of protection to safeguard the recognition and enforcement proceedings, so that there would be no injustice or unfairness if a foreign judgment is recognised and enforced, on the other. The findings of the study are as follows. In both Australia and the United States, there is a different approach concerning the recognition and enforcement of judgments rendered by courts interstate or in a foreign country. In order to maintain a single and integrated nation, there are constitutional and legislative requirements authorising courts to give conclusive effects to interstate judgments. In contrast, if the recognition and enforcement actions involve judgments rendered by a foreign country’s court, an Australian or a United States court will not recognise and enforce the foreign judgment unless the judgment has satisfied a number of requirements and does not fall under any of the exceptions to justify its non-recognition and non-enforcement. In the European Community, the Brussels I Regulation which governs the recognition and enforcement of judgments among European Union Member States has created a scheme, whereby there is only a minimal requirement that needs to be satisfied for the purposes of recognition and enforcement. Moreover, a judgment that is rendered by a Member State and based on any of the jurisdictional bases set forth in the Brussels I Regulation is entitled to be recognised and enforced in another Member State without further review of its underlying jurisdictional basis. However, there are concerns as to the adequacy of protection available under the Brussels I Regulation to safeguard the judgment-enforcing Member States, as well as those against whom recognition or enforcement is sought. This dissertation concludes by making two recommendations aimed at improving the means by which foreign judgments are recognised and enforced in the selected jurisdictions. The first is for the law in both Australia and the United States to undergo reform, including: adopting the real and substantial connection test as the new jurisdictional basis for the purposes of recognition and enforcement; liberalising the existing defences to safeguard the application of the real and substantial connection test; extending the application of the Foreign Judgments Act 1991 (Cth) in Australia to include at least its important trading partners; and implementing a federal statutory scheme in the United States to govern the recognition and enforcement of foreign judgments. The second recommendation is to introduce a convention on jurisdiction and the recognition and enforcement of foreign judgments. The convention will be a convention double, which provides uniform standards for the rules of jurisdiction a court in a contracting state must exercise when rendering a judgment and a set of provisions for the recognition and enforcement of resulting judgments.

The government as proprietor, preserver and user of copyright material under the Copyright Act 1968 (CTH)

This thesis examines the role of government as proprietor, preserver and user of copyright material under the Copyright Act 1968 (Cth) and the policy considerations which Australian law should take into account in that role. There are two recurring themes arising in this examination which are significant to the recommendations and conclusions. The first is whether the needs and status of government should be different from private sector institutions, which also obtain copyright protection under the law. This theme stems from the 2005 Report on Crown Copyright by the Copyright Law Review Committee and the earlier Ergas Committee Report which are discussed in Chapters 2 and 8 of this thesis. The second is to identify the relationship between government copyright law and policy, national cultural policy and fundamental governance values. This theme goes to the essence of the thesis. For example, does the law and practice of government copyright properly reflect technological change in the way we now access and use information and does it facilitate the modern information management principles of government? Is the law and practice of government copyright consistent with the greater openness and accountability of government? The thesis concludes that government copyright law and practice in each of the three governmental roles recognised under the Copyright Act 1968 has not responded adequately to the information age and to the desire and the ability of individuals to access information quickly and effectively. The solution offered in this thesis is reform of the law and of public policy that is in step with access to information policy, the promotion of better communication and interaction with the community, and the enhanced preservation of government and private copyright materials for reasons of government accountability, effective administration and national culture and heritage.

Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivity

The first fiber Bragg grating (FBG) accelerometer using direct transverse forces is demonstrated by fixing the FBG by its two ends and placing a transversely moving inertial object at its middle. It is very sensitive because a lightly stretched FBG is more sensitive to transverse forces than axial forces. Its resonant frequency and static sensitivity are analyzed by the classic spring-mass theory, assuming the axial force changes little. The experiments show that the theory can be modified for cases where the assumption does not hold. The resonant frequency can be modified by a linear relationship experimentally achieved, and the static sensitivity by an alternative method proposed. The principles of the over-range protection and low cross axial sensitivity are achieved by limiting the movement of the FBG and were validated experimentally. The sensitivities 1.333 and 0.634 nm/g were experimentally achieved by 5.29 and 2.83 gram inertial objects at 10 Hz from 0.1 to 0.4 g (g = 9.8 m/s 2), respectively, and their resonant frequencies were around 25 Hz. Their theoretical static sensitivities and resonant frequencies found by the modifications are 1.188 nm/g and 26.81 Hz for the 5.29 gram one and 0.784 nm/g and 29.04 Hz for the 2.83 gram one, respectively.

Outdoor worker sun protection project : a comprehensive applied research project to demonstrate the effectiveness of sun protection measures which influence high risk outdoor workers in Queensland to adopt sun safe behaviour practices 2010 – 2013

The QUT Outdoor Worker Sun Protection (OWSP) project undertook a comprehensive applied health promotion project to demonstrate the effectiveness of sun protection measures which influence high risk outdoor workers in Queensland to adopt sun safe behaviours. The three year project (2010-2013) was driven by two key concepts: 1) The hierarchy of control, which is used to address risks in the workplace, advocates for six control measures that need to be considered in order of priority (refer to Section 3.4.2); and 2) the Ottawa Charter which recommends five action means to achieve health promotion (refer to Section 2.1). The project framework was underpinned by a participatory action research approach that valued peoples’ input, took advantage of existing skills and resources, and stimulated innovation (refer to Section 4.2). Fourteen workplaces (small and large) with a majority outdoor workforce were recruited across regional Queensland (Darling Downs, Northwest, Mackay and Cairns) from four industries types: 1) building and construction, 2) rural and farming, 3) local government, and 4) public sector. A workplace champion was identified at each workplace and was supported (through resource provision, regular contact and site visits) over a 14 to 18 month intervention period to make sun safety a priority in their workplace. Employees and employers were independently assessed for pre- and postintervention sun protection behaviours. As part of the intervention, an individualised sun safety action plan was developed in conjunction with each workplace to guide changes across six key strategy areas including: 1) Policy (e.g., adopt sun safety practices during all company events); 2) Structural and environmental (e.g., shade on worksites; eliminate or minimise reflective surfaces); 3) Personal protective equipment (PPE) (e.g., trial different types of sunscreens, or wide-brimmed hats); 4) Education and awareness (e.g., include sun safety in inductions and toolbox talks; send reminder emails or text messages to workers);5) Role modelling (e.g., by managers, supervisors, workplace champions and mentors); and 6) Skin examinations (e.g., allow time off work for skin checks). The participatory action process revealed that there was no “one size fits all” approach to sun safety in the workplace; a comprehensive, tailored approach was fundamental. This included providing workplaces with information, resources, skills, know how, incentives and practical help. For example, workplaces engaged in farming complete differing seasonal tasks across the year and needed to prepare for optimal sun safety of their workers during less labour intensive times. In some construction workplaces, long pants were considered a trip hazard and could not be used as part of a PPE strategy. Culture change was difficult to achieve and workplace champions needed guidance on the steps to facilitate this (e.g., influencing leaders through peer support, mentoring and role modelling). With the assistance of the project team the majority of workplaces were able to successfully implement the sun safety strategies contained within their action plans, up skilling them in the evidence for sun safety, how to overcome barriers, how to negotiate with all relevant parties and assess success. The most important enablers to the implementation of a successful action plan were a pro-active workplace champion, strong employee engagement, supportive management, the use of highly visual educational resources, and external support (provided by the project team through regular contact either directly through phone calls or indirectly through emails and e-newsletters). Identified barriers included a lack of time, the multiple roles of workplace champions, (especially among smaller workplaces), competing issues leading to a lack of priority for sun safety, the culture of outdoor workers, and costs or budgeting constraints. The level of sun safety awareness, knowledge, and sun protective behaviours reported by the workers increased between pre-and post-intervention. Of the nine sun protective behaviours that were assessed, the largest changes reported included a 26% increase in workers who “usually or always” wore a broad-brimmed hat, a 20% increase in the use of natural shade, a 19% increase in workers wearing long-sleeved collared shirts, and a 16% increase in workers wearing long trousers.