From environmental concerns towards sustainable food provisioning. : Material flow and food consumption scenario studies on sustainability of agri-food systems

Agriculture is an economic activity that heavily relies on the availability of natural resources. Through its role in food production agriculture is a major factor affecting public welfare and health, and its indirect contribution to gross domestic product and employment is significant. Agriculture also contributes to numerous ecosystem services through management of rural areas. However, the environmental impact of agriculture is considerable and reaches far beyond the agroecosystems. The questions related to farming for food production are, thus, manifold and of great public concern. Improving environmental performance of agriculture and sustainability of food production, sustainabilizing food production, calls for application of wide range of expertise knowledge. This study falls within the field of agro-ecology, with interphases to food systems and sustainability research and exploits the methods typical of industrial ecology. The research in these fields extends from multidisciplinary to interdisciplinary and transdisciplinary, a holistic approach being the key tenet. The methods of industrial ecology have been applied extensively to explore the interaction between human economic activity and resource use. Specifically, the material flow approach (MFA) has established its position through application of systematic environmental and economic accounting statistics. However, very few studies have applied MFA specifically to agriculture. The MFA approach was used in this thesis in such a context in Finland. The focus of this study is the ecological sustainability of primary production. The aim was to explore the possibilities of assessing ecological sustainability of agriculture by using two different approaches. In the first approach the MFA-methods from industrial ecology were applied to agriculture, whereas the other is based on the food consumption scenarios. The two approaches were used in order to capture some of the impacts of dietary changes and of changes in production mode on the environment. The methods were applied at levels ranging from national to sector and local levels. Through the supply-demand approach, the viewpoint changed between that of food production to that of food consumption. The main data sources were official statistics complemented with published research results and expertise appraisals. MFA approach was used to define the system boundaries, to quantify the material flows and to construct eco-efficiency indicators for agriculture. The results were further elaborated for an input-output model that was used to analyse the food flux in Finland and to determine its relationship to the economy-wide physical and monetary flows. The methods based on food consumption scenarios were applied at regional and local level for assessing feasibility and environmental impacts of relocalising food production. The approach was also used for quantification and source allocation of greenhouse gas (GHG) emissions of primary production. GHG assessment provided, thus, a means of crosschecking the results obtained by using the two different approaches. MFA data as such or expressed as eco-efficiency indicators, are useful in describing the overall development. However, the data are not sufficiently detailed for identifying the hot spots of environmental sustainability. Eco-efficiency indicators should not be bluntly used in environmental assessment: the carrying capacity of the nature, the potential exhaustion of non-renewable natural resources and the possible rebound effect need also to be accounted for when striving towards improved eco-efficiency. The input-output model is suitable for nationwide economy analyses and it shows the distribution of monetary and material flows among the various sectors. Environmental impact can be captured only at a very general level in terms of total material requirement, gaseous emissions, energy consumption and agricultural land use. Improving environmental performance of food production requires more detailed and more local information. The approach based on food consumption scenarios can be applied at regional or local scales. Based on various diet options the method accounts for the feasibility of re-localising food production and environmental impacts of such re-localisation in terms of nutrient balances, gaseous emissions, agricultural energy consumption, agricultural land use and diversity of crop cultivation. The approach is applicable anywhere, but the calculation parameters need to be adjusted so as to comply with the specific circumstances. The food consumption scenario approach, thus, pays attention to the variability of production circumstances, and may provide some environmental information that is locally relevant. The approaches based on the input-output model and on food consumption scenarios represent small steps towards more holistic systemic thinking. However, neither one alone nor the two together provide sufficient information for sustainabilizing food production. Environmental performance of food production should be assessed together with the other criteria of sustainable food provisioning. This requires evaluation and integration of research results from many different disciplines in the context of a specified geographic area. Foodshed area that comprises both the rural hinterlands of food production and the population centres of food consumption is suggested to represent a suitable areal extent for such research. Finding a balance between the various aspects of sustainability is a matter of optimal trade-off. The balance cannot be universally determined, but the assessment methods and the actual measures depend on what the bottlenecks of sustainability are in the area concerned. These have to be agreed upon among the actors of the area

Vapaa-ajan vieton luonnonvarojen kulutus

This thesis studies the use of natural resources for leisure time activities. The method used is Material Input per Service Unit (MIPS method). Leisure time has an increasing effect on the material flows of households, and that way has a bigger pressure on the environment. The most popular way of spending spare time in Finland is to watch TV and to listen to music or radio. Regardless of these, this thesis takes a closer look at boating, playing a musical instrument and visiting a theatre and tries to quantify their material flows. MIPS calculations of this thesis are case-studies and do not tell the whole truth about the hobbies. The aim was to have an overview about the magnitude of the activities. In the boating calculations, inside the system boundaries there are the boat itself, transport of the boat, outboard motor, gasoline consumption of the outboard motor, travelling to and from the harbour, and the harbour infrastructure. Calculations of playing a music instrument consider the instrument itself, music school and its maintenance, and travelling to the school. In the case of theatre the included things are theatre house and its maintenance, decor and costumes of the plays, transport of the decor, and travelling of the audience. The results of this thesis suggest that the biggest material flow of boating comes from travelling to and from the harbour and from the harbour infrastructure. The gasoline consumption of the outboard motor also makes a difference. One hour of boating with a rowing boat consumes 1 kg of abiotic materials. Boating with an outboard motorboat consumes astonishing 113 kg of abiotic resources. Visiting a music lesson for one hour consumes 9 kg of abiotic resources when travelling there by bus. One hour in a theatre play consumes 17 kg of abiotic materials when travelling by bus. Transport has a significant role on the resource consumption of leisure time activities.

Digital elevation model error in terrain analysis

Digital elevation models (DEMs) have been an important topic in geography and surveying sciences for decades due to their geomorphological importance as the reference surface for gravita-tion-driven material flow, as well as the wide range of uses and applications. When DEM is used in terrain analysis, for example in automatic drainage basin delineation, errors of the model collect in the analysis results. Investigation of this phenomenon is known as error propagation analysis, which has a direct influence on the decision-making process based on interpretations and applications of terrain analysis. Additionally, it may have an indirect influence on data acquisition and the DEM generation. The focus of the thesis was on the fine toposcale DEMs, which are typically represented in a 5-50m grid and used in the application scale 1:10 000-1:50 000. The thesis presents a three-step framework for investigating error propagation in DEM-based terrain analysis. The framework includes methods for visualising the morphological gross errors of DEMs, exploring the statistical and spatial characteristics of the DEM error, making analytical and simulation-based error propagation analysis and interpreting the error propagation analysis results. The DEM error model was built using geostatistical methods. The results show that appropriate and exhaustive reporting of various aspects of fine toposcale DEM error is a complex task. This is due to the high number of outliers in the error distribution and morphological gross errors, which are detectable with presented visualisation methods. In ad-dition, the use of global characterisation of DEM error is a gross generalisation of reality due to the small extent of the areas in which the decision of stationarity is not violated. This was shown using exhaustive high-quality reference DEM based on airborne laser scanning and local semivariogram analysis. The error propagation analysis revealed that, as expected, an increase in the DEM vertical error will increase the error in surface derivatives. However, contrary to expectations, the spatial au-tocorrelation of the model appears to have varying effects on the error propagation analysis depend-ing on the application. The use of a spatially uncorrelated DEM error model has been considered as a 'worst-case scenario', but this opinion is now challenged because none of the DEM derivatives investigated in the study had maximum variation with spatially uncorrelated random error. Sig-nificant performance improvement was achieved in simulation-based error propagation analysis by applying process convolution in generating realisations of the DEM error model. In addition, typology of uncertainty in drainage basin delineations is presented.

Substance flow analysis in Finland : Four case studies on N and P flows

Nitrogen (N) and phosphorus (P) are essential elements for all living organisms. However, in excess, they contribute to several environmental problems such as aquatic and terrestrial eutrophication. Globally, human action has multiplied the volume of N and P cycling since the onset of industrialization. The multiplication is a result of intensified agriculture, increased energy consumption and population growth. Industrial ecology (IE) is a discipline, in which human interaction with the ecosystems is investigated using a systems analytical approach. The main idea behind IE is that industrial systems resemble ecosystems, and, like them, industrial systems can then be described using material, energy and information flows and stocks. Industrial systems are dependent on the resources provided by the biosphere, and these two cannot be separated from each other. When studying substance flows, the aims of the research from the viewpoint of IE can be, for instance, to elucidate the ways how the cycles of a certain substance could be more closed and how the flows of a certain substance could be decreased per unit of production (= dematerialization). In Finland, N and P are studied widely in different ecosystems and environmental emissions. A holistic picture comparing different societal systems is, however, lacking. In this thesis, flows of N and P were examined in Finland using substance flow analysis (SFA) in the following four subsystems: I) forest industry and use of wood fuels, II) food production and consumption, III) energy, and IV) municipal waste. A detailed analysis at the end of the 1990s was performed. Furthermore, historical development of the N and P flows was investigated in the energy system (III) and the municipal waste system (IV). The main research sources were official statistics, literature, monitoring data, and expert knowledge. The aim was to identify and quantify the main flows of N and P in Finland in the four subsystems studied. Furthermore, the aim was to elucidate whether the nutrient systems are cyclic or linear, and to identify how these systems could be more efficient in the use and cycling of N and P. A final aim was to discuss how this type of an analysis can be used to support decision-making on environmental problems and solutions. Of the four subsystems, the food production and consumption system and the energy system created the largest N flows in Finland. For the creation of P flows, the food production and consumption system (Paper II) was clearly the largest, followed by the forest industry and use of wood fuels and the energy system. The contribution of Finland to N and P flows on a global scale is low, but when compared on a per capita basis, we are one of the largest producers of these flows, with relatively high energy and meat consumption being the main reasons. Analysis revealed the openness of all four systems. The openness is due to the high degree of internationality of the Finnish markets, the large-scale use of synthetic fertilizers and energy resources and the low recycling rate of many waste fractions. Reduction in the use of fuels and synthetic fertilizers, reorganization of the structure of energy production, reduced human intake of nutrients and technological development are crucial in diminishing the N and P flows. To enhance nutrient recycling and replace inorganic fertilizers, recycling of such wastes as wood ash and sludge could be promoted. SFA is not usually sufficiently detailed to allow specific recommendations for decision-making to be made, but it does yield useful information about the relative magnitude of the flows and may reveal unexpected losses. Sustainable development is a widely accepted target for all human action. SFA is one method that can help to analyse how effective different efforts are in leading to a more sustainable society. SFA's strength is that it allows a holistic picture of different natural and societal systems to be drawn. Furthermore, when the environmental impact of a certain flow is known, the method can be used to prioritize environmental policy efforts.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Spontaanin puheen prosodinen jaksottelu

The common focus of the studies brought together in this work is the prosodic segmentation of spontaneous speech. The theoretically most central aspect is the introduction and further development of the IJ-model of intonational chunking. The study consists of a general introduction and five detailed studies that approach prosodic chunking from different perspectives. The data consist of recordings of face-to-face interaction in several spoken varieties of Finnish and Finland Swedish; the methodology is usage-based and qualitative. The term “speech prosody” refers primarily to the melodic and rhythmic characteristics of speech. Both speaking and understanding speech require the ability to segment the flow of speech into suitably sized prosodic chunks. In order to be usage-based, a study of spontaneous speech consequently needs to be based on material that is segmented into prosodic chunks of various sizes. The segmentation is seen to form a hierarchy of chunking. The prosodic models that have so far been developed and employed in Finland have been based on sentences read aloud, which has made it difficult to apply these models in the analysis of spontaneous speech. The prosodic segmentation of spontaneous speech has not previously been studied in detail in Finland. This research focuses mainly on the following three questions: (1) What are the factors that need to be considered when developing a model of prosodic segmentation of speech, so that the model can be employed regardless of the language or dialect under analysis? (2) What are the characteristics of a prosodic chunk, and what are the similarities in the ways chunks of different languages and varieties manifest themselves that will make it possible to analyze different data according to the same criteria? (3) How does the IJ-model of intonational chunking introduced as a solution to question (1) function in practice in the study of different varieties of Finnish and Finland Swedish? The boundaries of the prosodic chunks were manually marked in the material according to context-specific acoustic and auditory criteria. On the basis of the data analyzed, the IJ-model was further elaborated and implemented, thus allowing comparisons between different language varieties. On the basis of the empirical comparisons, a prosodic typology is presented for the dialects of Swedish in Finland. The general contention is that the principles of the IJ-model can readily be used as a methodological tool for prosodic analysis irrespective of language varieties.

Original Pirate Material : Translating Justin Somper's Demons of the Ocean

Tutkielma käsittelee suomentamani Vampiraatit: Kirottujen laiva -nuortenromaanin käännösprosessia. Materiaalina on kustantajalle toimittamani näytekäännös, joka käsittää yhden kokonaisen luvun ja lisäksi kirjan tapahtumiin keskeisesti liittyvän runon. Molemmista tarkastellaan sekä lopullisia, julkaistuja versioita että ensimmäisiä raakaversioita. Julkaistut versiot ovat osa varsinaista tutkielmaa, raakaversiot ja lähtötekstit puolestaan on sisällytetty mukaan liitteinä. Tarkastelunäkökulmani on pääosin deskriptiivinen ja kontrastiivinen. Proosa-analyysi jakautuu kahteen osaan. Ensimmäisessä osassa tutkin tapoja, joilla käännökseni vastustaa ns. lisääntyvän standardisoitumisen lakia (the law of growing standardization), jota Gideon Toury on ehdottanut yleispäteväksi käännöslaiksi. Touryn laki ennustaa, että käännökset ovat useimmiten tyylillisesti alkuteoksiaan latteampia. Esimerkkini kuitenkin osoittavat, että kääntäjän on mahdollista valita ratkaisunsa niin, että latistumiselta vältytään, ainakin silloin, kun lähtöteksti on melko suoraviivaista. Proosa-analyysin jälkimmäinen osa keskittyy käännöksen muokkaamiseen. Vertaan siinä näytekäännös-luvun ensimmäistä versiota julkaistuun versioon ja tutkin muun muassa sitä, missä määrin ensimmäinen versio sisältää lähtökielen interferenssiä, ts. missä määrin englannille tyypilliset rakenteet paistavat siitä läpi. Tarkastelun kohteena ovat myös kohdekieliset kömpelyydet ja niiden poistaminen sekä pienet mutta kokonaisuuden kannalta tärkeät tyylilliset muutokset. Esimerkeistä käy selvästi ilmi kääntämisen prosessimainen luonne. Käännösnäytteeseen sisältyneen runon suomentaminen oli oma erillinen kokonaisuutensa. Tässä osiossa vertailen lähtötekstiä, raakaversiota ja julkaistua käännöstä rinnakkain säkeistö säkeistöltä. Tarkastelussa painottuvat edelleen tekstin muokkaaminen ja hiominen. Analyysien taustaksi esittelen lyhyesti alkuteoksen ja sen kirjoittajan Justin Somperin. Kuvailen myös omaa käännösfilosofiaani ja esittelen kaksi siihen voimakkaasti vaikuttanutta suomentajaa.

Vapaata mielenjuoksua : Suomenkielisen freestyle-rapin ilmenemismuodot, estetiikka ja kompositio

The thesis is about Finnish freestyle-rap, a modern form of oral poetry producing improvised rap lyrics at the moment of performance. The research material consists of interviews with seven freestyle experts and a DVD from Finnish Rap Championships 2005 containing freestyle-rap. The thesis has three goals: describing the different variations or subgenres of freestyle, outlining the esthetics and register of freestyle, and examining the composition of freestyle. The research material acts a central role in the thesis but the theoretical framework is also wide: cornerstones are John Miles Foley's register analysis, oral formulaic theory and William Levelt's psycholinguistic theory on planning of speech. Freestyle is divided into three partially overlapping genres with slight variation in conventions. The genres are freestyle battle, cypher, and live freestyle. Freestyle's esthetics are composed of certain qualities and preferences: the rhyme is a syllabically repeating vocal rhyme. The rapping must be synchronised with the background rhythm and the rhyme comes in the end of the line. The lyrics must be somehow anchored to the surroundings and the moment of performance. The style of rapping, ie. flow, has to be personal one way or the other. Individual formulas are used to some extent in freestyle compostition. When planning the lines, all other content is subordinate to the rhyme, whose phonetic processing is the primary act in the planning of freestyle. This discovery sets Levelt's theory open to doubt.

Mikä yliopisto-opiskelijaa kiihdyttää? : Opiskeluympäristöjen tutkimusta CASS-kokemusotantamenetelmällä flow-teoriaa ja ydintunneteorioita soveltaen

Flow experience is often defined either as an experience of high concentration and enjoyment or as a situation, where high challenges are matched with high skills. According to core-emotion theories, the experience of any emotion contains two core emotions: valence and arousal. Through an accurate mathematical model, the present study investigated, whether the experience of concentration and enjoyment is related to situations where both challenge and skills are high and in balance. Further, it was investigated what sort of core emotions are related to differing relationships between challenge and skills. Finally, university students’ experiences of their natural study environments were described in terms of core emotions and in terms of relationships between challenge and skills. Participants were 55 university students who participated two weeks research period. Altogether 3367 questionnaire answers were collected with the CASS experience-sampling method, operating in 3G-mobile phones. The relationship between challenge and skills (competence) was defined in an exact way in polar coordinates. An enjoyable and concentrated flow experience was defined as a sum variable of absorption, interest and enthusiasm. Core emotions were calculated with factor analysis from nine emotion variables. As expected, an experience of concentration and enjoyment was, on average, related to the situations where both challenge and skills were high and in balance. This was not, however, the case in every situation. Thus, it should be taken into consideration how flow experience is operationalised in experience sampling studies. When flow experience was defined as a situation of high challenge and high skills, it was often related to high valence and arousal emotions such as excitement or enthusiasm. A happier or a more tranquil enjoyment was related to situations of moderate challenge and high skills. Experiences differed clearly between various natural study environments. At lectures students were often bored or mentally absent, and did not experience challenges. In a small group students were often excited or enthusiastic, and showed optimal balance between challenge and skills. At library students felt satisfied and were engaged in highly challenging work.

Pelaamiskokemukset ja pelaamisen yksilöllisten merkitysten yhteys flow n kokemiseen

The main goal of this study was to explore experiences induced by playing digital games (i.e. meaning of playing). In addition, the study aimed at structuring the larger entities of gaming experience. This was done by using theory-driven and data grounded approaches. Previously gaming experiences have not been explored as a whole. The consideration of gaming experiences on the basis of psychological theories and studies has also been rare. The secondary goal of this study was to clarify, whether the individual meanings of playing are connected with flow experience in an occasional gaming situation. Flow is an enjoyable experience and usually activities that induce flow are gladly repeated. Previously, flow has been proved to be an essential concept in the context of playing, but the relations between meanings of playing and flow have not been studied. The relations between gender and gaming experiences were examined throughout the study, as well as the relationship between gaming frequency and experiences. The study was divided into two sections, of which the first was composed according to the main goals. Its data was gathered by using an Internet questionnaire. The other section covered the themes that were formulated on the basis of the secondary aims. In that section, the participants played a driving game for 40 minutes and then filled in a questionnaire, which measured flow related experiences. In both sections, the participants were mainly young Finnish adults. All the participants in the second section (n = 60) had already participated in the first section (n = 267). Both qualitative and quantitative research techniques were used in the study. In the first section, freely described gaming experiences were classified according to the grounded theory. After that, the most common categories were further classified into the basic structures of gaming experience, some according to the existing theories of experience structure and some according to the data (i.e. grounded theory). In the other section flow constructs were measured and used as grouping variables in a cluster analysis. Three meaningful groups were compared regarding the meanings of gaming that were explored in the first section. The descriptions of gaming experiences were classified into four main categories, which were conceptions of the gaming process, emotions, motivations and focused attention. All the theory-driven categories were found in the data. This frame of reference can be utilized in future when reliability and validity of already existing methods for measuring gaming experiences are considered or new methods will be developed. The connection between the individual relevance of gaming and flow was minor. However, as the scope was specified to relations between primary meanings of playing and flow, it was noticed that attributing enjoyment to gaming did not lead to the strongest flow-experiences. This implies that the issue should be studied more in future. As a whole this study proves that gamer-related research from numerous vantage points can benefit from concentrating on gaming experiences.

Psychophysiology of flow experience : An explorative study

This study explored the possibilities the psychophysiological methodology offer to flow research. Facial electromyography has often been used to index valence, and electrodermal activity to index arousal, the two basic dimensions of emotion. It was hypothesized that these measures can also be used to examine enjoyment, a basic component of flow experiment. A digital game was used to induce flow, and physiological activity of 32 subjects was measured continuously. Flow State Scale was used to assess flow. Activity of corrugator supercilii muscle, an index of negative valence, was negatively correlated with flow reports, as hypothesized. Contrary to hypothesis, skin conductance level, an index of arousal, was unrelated to self-reported flow. The results for association between flow and zygomaticus major and orbicularis oculi muscle activities, indices of positive valence, were inconclusive, possibly due to experimental design where only tonic measures were available. Psychophysiological methods are recommended for future studies of flow. Specifically, the time series approach may be particularly viable in examining the temporal aspects of flow, an area currently unexplored. Furthermore, it is suggested that digital game research would benefit from psychophysiological study of game-related flow.

Drug Analysis without Primary Reference Standards : Application of LC-TOFMS and LC-CLND to Biofluids and Seized Material

Drug Analysis without Primary Reference Standards: Application of LC-TOFMS and LC-CLND to Biofluids and Seized Material Primary reference standards for new drugs, metabolites, designer drugs or rare substances may not be obtainable within a reasonable period of time or their availability may also be hindered by extensive administrative requirements. Standards are usually costly and may have a limited shelf life. Finally, many compounds are not available commercially and sometimes not at all. A new approach within forensic and clinical drug analysis involves substance identification based on accurate mass measurement by liquid chromatography coupled with time-of-flight mass spectrometry (LC-TOFMS) and quantification by LC coupled with chemiluminescence nitrogen detection (LC-CLND) possessing equimolar response to nitrogen. Formula-based identification relies on the fact that the accurate mass of an ion from a chemical compound corresponds to the elemental composition of that compound. Single-calibrant nitrogen based quantification is feasible with a nitrogen-specific detector since approximately 90% of drugs contain nitrogen. A method was developed for toxicological drug screening in 1 ml urine samples by LC-TOFMS. A large target database of exact monoisotopic masses was constructed, representing the elemental formulae of reference drugs and their metabolites. Identification was based on matching the sample component s measured parameters with those in the database, including accurate mass and retention time, if available. In addition, an algorithm for isotopic pattern match (SigmaFit) was applied. Differences in ion abundance in urine extracts did not affect the mass accuracy or the SigmaFit values. For routine screening practice, a mass tolerance of 10 ppm and a SigmaFit tolerance of 0.03 were established. Seized street drug samples were analysed instantly by LC-TOFMS and LC-CLND, using a dilute and shoot approach. In the quantitative analysis of amphetamine, heroin and cocaine findings, the mean relative difference between the results of LC-CLND and the reference methods was only 11%. In blood specimens, liquid-liquid extraction recoveries for basic lipophilic drugs were first established and the validity of the generic extraction recovery-corrected single-calibrant LC-CLND was then verified with proficiency test samples. The mean accuracy was 24% and 17% for plasma and whole blood samples, respectively, all results falling within the confidence range of the reference concentrations. Further, metabolic ratios for the opioid drug tramadol were determined in a pharmacogenetic study setting. Extraction recovery estimation, based on model compounds with similar physicochemical characteristics, produced clinically feasible results without reference standards.