The Politics of Pulp Investment and the Brazilian Landless Movement (MST)

The Politics of Pulp Investment and the Brazilian Landless Movement (MST) The paper industry has been moving more heavily to the global South at the beginning of the 21st century. In a number of cases the rural populations of the global South have engaged in increasingly important resistance in their scuffle with the large-scale tree plantation-relying pulp investment model. The resistance had generally not yet managed to slow down Southern industrial tree plantation expansion until 2004. After all, even the MST, perhaps the strongest of the Southern movements, has limited power in comparison to the corporations pushing for plantation expansion. This thesis shows how, even against these odds, depending on the mechanisms of contention and case-specific conflict dynamics, in some cases the movements have managed to slow and even reverse plantation expansion. The thesis is based on extensive field research in the Brazilian countryside. It outlines a new theory of contentious agency promotion, emphasizing its importance in the shaping of corporate resource exploitation. The thesis includes a Qualitative Comparative Analysis of resistance influence on the economic outcomes of all (14) Brazilian large-scale pulp projects between 2004-2008. The central hypothesis of the thesis is that corporate resource exploitation can be slowed down more effectively and likely when the resistance is based on contentious agency. Contentious agency is created by the concatenation of five mutually supporting mechanisms of contention: organizing and politicizing a social movement; heterodox framing of pulp projects; protesting; networking; and embedding whilst maintaining autonomy. The findings suggest that contentious agency can slow or even reverse the expansion of industrial plantations, whereas when contentious agency promotion was inactive, fast or even unchecked plantation expansion was always the outcome. The rule applied to all the assessed 14 pulp conflict cases. The hypothesis gained strong support even in situations where corporate agency promotion was simultaneously active. In previous studies on social movements, there has been a lack of contributions that help us understand the causal mechanisms of contention influencing economic outcomes. The thesis answers to the call by merging a Polanyian analysis of the political economy with the Dynamics of Contention research program and making a case for the impact of contentious agency on capital accumulation. The research concludes that an efficient social movement can utilize mechanisms of contention to promote the potential of activism among its members and influence investment outcomes. Protesting, for example via pioneering land occupations, seemed to be particularly important. Until now, there has been no comprehensive theory on when and how contentious agency can slow down or reverse the expansion of corporate resource exploitation. The original contribution of this research is to provide such a theory, and utilize it to offer an extensive explanation on the conflicts over pulp investment in Brazil, the globalization of the paper industry, and slowing of industrial plantation expansion in the global South.

Pulp and Paper Fiction: On the Discursive Legitimation of Global Industrial Restructuring

Despite the central role of legitimacy in social and organizational life, we know little of the subtle meaning-making processes through which organizational phenomena, such as industrial restructuring, are legitimated in contemporary society. Therefore, this paper examines the discursive legitimation strategies used when making sense of global industrial restructuring in the media. Based on a critical discourse analysis of extensive media coverage of a revolutionary pulp and paper sector merger, we distinguish and analyze five legitimation strategies: (1) normalization, (2) authorization, (3) rationalization, (4) moralization, and (5) narrativization. We argue that while these specific legitimation strategies appear in individual texts, their recurring use in the intertextual totality of the public discussion establishes the core elements of the emerging legitimating discourse.

Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

Measuring attitudes in translation: a study of Nokia business reports

Background Contemporary Finnish, spoken and written, reveals loanwords or foreignisms in the form of hybrids: a mixture of Finnish and foreign syllables (alumiinivalua). Sometimes loanwords are inserted into the Finnish sentence in their raw form just as they are found in the source language (pulp, after sales palvelu). Again, sometimes loanwords are calques, which appear Finnish but are spelled and pronounced in an altogether foreign manner (Protomanageri, Promenadi kampuksella). Research Questions What role does Finnish business translation play in the migration of foreignisms into Finnish if we consider translation "as a construct of solutions determined by the ideological constraints and conflicts characterizing the target culture" (Robyns 1992: 212)? What attitudes do the Finns display toward the presence of foreignisms in their language? What socio-economic or ideological conditions (Bassnett 1994: 321) are responsible for these attitudes? Are these conditions dynamic? What tools can be used to measure such attitudes? This dissertation set out to answer these and similar questions. Attitudes are imperialist (where otherness is both denied and transformed), defensive (where otherness is acknowledged, transformed, and vilified), transdiscursive (a neutral attitude to both otherness and transformation), or finally defective (where alien migration is acknowledged and "stimulated") (Robyns 1994: 60). Methodology The research method follows Rose's schema (1984: 8): (a) take an existing theory, (b) develop from it a proposition specific enough to be tested, (c) devise a scheme that tests this proposition, (d) carry through the scheme in practice, (e) draw up results and discuss conclusions in relation to the original theory. In other words, the method attempts an explanation of a Finnish social phenomenon based on systematic analyses of translated evidence (Lewins 1992: 4) whereby what really matters is the logical sequence that connects the empirical data to the initial research questions raised above and, ultimately to its conclusion (Yin 1984: 29). Results This research found that Finnish translators of the Nokia annual reports used a foreignism whenever possible such as komponentin instead of rakenneosa, or investoida instead of sijoittaa, and often without any apparent justification (Pryce 2003: 203-12) more than the translator's personal preference. In the old documents (minutes of meetings of the Board of Directors of Osakeyhtio H. Saastamoinen, Ltd. dated 5 July 1912-1917, a NOPSA booklet (1932), Enzo-Gutzeit-Tornator Oy document (1938), Imatra Steel Oy Annual Report 1964, and Nokia Oy Annual Report 1946), foreignisms under Haugen's (1950: 210-31) Classification #1 occurred an average of 0.6 times, while in the new documents (Nokia 1998 translated Annual Reports) they occurred an average of 6.5 times. That big difference, suggests transdiscursive and defective attitudes in Finnish society toward the other. In the 1850s, Finnish attitudes toward alien persons and cultures were hardened, intolerant and prohibitive because language politics were both nascent and emerging, and Finns adopted a defensive stance (Paloposki 2002: 102 ff) to protect their cultural and national treasures such as language and folklore. Innovation The innovation here is that no prior doctoral level research measured Finnish attitudes toward foreignisms using a business translation approach. This is the first time that Haugen's classification has been modified and applied in target language analysis. It is hoped that this method would be replicated in similar research in the future. Applications For practical applications, researchers with interest in languages, language development, language influences, language ideologies, and power structures that affect national language policies will find this thesis useful, especially the model for collecting, grouping, and analyzing foreignisms that has been demonstrated here. It is intended to document for posterity current attitudes of Finns toward the other as revealed in business translations from 1912-1964, and in 1998. This way, future language researchers would be able to explore a time-line of Finnish language development and attitudes toward the other. Communication firms may also find this research interesting. In future, could the model we adopted be used to analyze literary texts or religious texts for example? Future Trends Though business documents show transdiscursive attitudes, other segments of Finnish society may show defensive or imperialist attitudes. When the ideology of industrialization changes in the future, will Finnish attitudes toward the other change as well? Will it then be possible to use the same kind of analytical tools to measure Finnish attitudes? More broadly, will linguistic change continue in the same direction of transdiscursive attitudes, or will the change slow down or even reverse into xenophobic attitudes? Is this our model culture-specific or can it be used in the context of other cultures? Conclusion There is anger against foreignisms in Finland as newspaper publications and television broadcasts show, but research shows that a majority of Finns consider foreignisms and the languages from which they come as sources of enrichment for Finnish culture (Laitinen 2000, Eurobarometer series 41 of July 1994, 44 of Spring 1996, 50 of Autumn 1998). Ideologies of industrialization and globalization in Finland have facilitated transdiscursive tendencies. When Finland's political ideology was intolerant toward foreign influences in the 1850s because Finland was in the process of consolidating her nascent country and language, attitudes toward the importation of loanwords also became intolerant. Presently, when industrialization and globalization became the dominant ideologies, we see a shift in attitudes toward transdiscursive tendencies. Ideology is usually unseen and too often ignored by translation researchers. However, ideology reveals itself as the most powerful factor affecting language attitudes in a target culture. Key words Finnish, Business Translation, Ideology, Foreignisms, Imperialist Attitudes, Defensive Attitudes, Transdiscursive Attitudes, Defective Attitudes, the Other, Old Documents, New Documents.

Stone Weathering in the Monastic Building Complex on Mountain of St Aaron in Petra, Jordan.

Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.

Molecular Genetic Background of Tumours in Hereditary Leiomyomatosis and Renal Cell Cancer Syndrome

Hereditary Leiomyomatosis and Renal Cell Cancer (HLRCC) is a hereditary tumour predisposition syndrome. Its phenotype includes benign cutaneous and uterine leiomyomas (CLM, ULM) with high penetrance and rarer renal cell cancer (RCC), most commonly of papillary type 2 subtype. Over 130 HLRCC families have been identified world-wide but the RCC phenotype seems to concentrate in families from Finland and North America for unknown reasons. HLRCC is caused by heterozygous germline mutations in the fumarate hydratase (FH) gene. FH encodes the enzyme fumarase from mitochondrial citric acid cycle. Fumarase enzyme activity or type or site of the FH mutation are unassociated with disease phenotype. The strongest evidence for tumourigenesis mechanism in HLRCC supports a hypoxia inducible factor driven process called pseudohypoxia resulting from accumulation of the fumarase substrate fumarate. In this study, to assess the importance of gene- or exon-level deletions or amplifications of FH in patients with HLRCC-associated phenotypes, multiplex ligation-dependent probe amplification (MLPA) method was used. One novel FH mutation, deletion of exon 1, was found in a Swedish male patient with an evident HLRCC phenotype with CLM, RCC, and a family history of ULM and RCC. Six other patients with CLM and 12 patients with only RCC or uterine leiomyosarcoma (ULMS) remained FH mutation-negative. These results suggest that copy number aberrations of FH or its exons are an infrequent cause of HLRCC and that only co-occurrence of benign tumour types justifies FH-mutation screening in RCC or ULMS patients. Determination of the genomic profile of 11 HLRCC-associated RCCs from Finnish patients was performed by array comparative genomic hybridization. The most common copy number aberrations were gains of 2, 7, and 17 and losses of 13q12.3-q21.1, 14, 18, and X. When compared to aberrations of sporadic papillary RCCs, HLRCC-associated RCCs harboured a distinct DNA copy number profile and lacked many of the changes characterizing the sporadic RCCs. The findings suggest a divergent molecular pathway for tumourigenesis of papillary RCCs in HLRCC. In order to find a genetic modifier of RCC risk in HLRCC, genome-wide linkage and identical by descent (IBD) analysis studies were performed in Finnish HLRCC families with microsatellite marker mapping and SNP-array platforms. The linkage analysis identified only one locus of interest, the FH gene locus in 1q43, but no mutations were found in the genes of the region. IBD analysis yielded no convincing haplotypes shared by RCC patients. Although these results do not exclude the existence of a genetic modifier for RCC risk in HLRCC, they emphasize the role of FH mutations in the malignant tumourigenesis of HLRCC. To study the benign tumours in HLRCC, genome-wide DNA copy number and gene expression profiles of sporadic and HLRCC ULMs were defined with modern SNP- and gene-expression array platforms. The gene expression array suggests novel genes involved in FH-deficient ULM tumourigenesis and novel genes with putative roles in propagation of sporadic ULM. Both the gene expression and copy number profiles of HLRCC ULMs differed from those of sporadic ULMs indicating distinct molecular basis of the FH-deficient HLRCC tumours.

Tracking and identifying wastewater toxicants and assessing their biodegradation products

Screening of wastewater effluents from municipal and industrial wastewater treatment plants with biotests showed that the treated wastewater effluents possess only minor acute toxic properties towards whole organisms (e.g. bacteria, algae, daphnia), if any. In vitro tests (sub-mitochondrial membranes and fish hepatocytes) were generally more susceptible to the effluents. Most of the effluents indicated the presence of hormonally active compounds, as the production of vitellogenin, an egg yolk precursor protein, was induced in fish hepatocytes exposed to wastewater. In addition, indications of slight genotoxic potential was found in one effluent concentrate with a recombinant bacteria test. Reverse electron transport (RET) of mitochondrial membranes was used as a model test to conduct effluent assessment followed by toxicant characterisations and identifications. Using a modified U.S. EPA Toxicity Identification Evaluation Phase I scheme and additional case-specific methods, the main compound in a pulp and paper mill effluent causing RET inhibition was characterised to be an organic, relatively hydrophilic high molecular weight (HMW) compound. The toxicant could be verified as HMW lignin by structural analyses using nuclear magnetic resonance. In the confirmation step commercial and in-house extracted lignin products were used. The possible toxicity related structures were characterised by statistical analysis of the chemical breakdown structures of laboratory-scale pulping and bleaching effluents and the toxicities of these effluents. Finally, the biological degradation of the identified toxicant and other wastewater constituents was evaluated using bioassays in combination with chemical analyses. Biological methods have not been used routinely in establishing effluent discharge limits in Finland. However, the biological effects observed in this study could not have been predicted using only routine physical and chemical effluent monitoring parameters. Therefore chemical parameters cannot be considered to be sufficient in controlling effluent discharges especially in case of unknown, possibly bioaccumulative, compounds that may be present in small concentrations and may cause chronic effects.

Studies on metal complex formation of environmentally friendly aminopolycarboxylate chelating agents

Aminopolykarboksyylaatteja, kuten etyleenidiamiinitetraetikkahappoa (EDTA), on käytetty useiden vuosikymmenien ajan erinomaisen metalli-ionien sitomiskyvyn vuoksi kelatointiaineena lukuisissa sovelluksissa sekä analytiikassa että monilla teollisisuuden aloilla. Näiden yhdisteiden biohajoamattomuus on kuitenkin herättänyt huolta viime aikoina, sillä niiden on havaittu olevan hyvin pysyviä luonnossa. Tämä työ on osa laajempaa tutkimushanketta, jossa on tavoitteena löytää korvaavia kelatointiaineita EDTA:lle. Tutkimuksen aiheena on kuuden kelatointiaineen metalli-ionien sitomiskyvyn kartoitus. EDTA:a paremmin luonnossa hajoavina nämä ovat ympäristöystävällisiä ehdokkaita korvaaviksi kelatointiaineiksi useisiin sovelluksiin. Työssä tutkittiin niiden kompleksinmuodostusta useiden metalli-ionien kanssa potentiometrisella titrauksella. Metalli-ionivalikoima vaihteli hieman kelatointiaineesta riippuen sisältäen magnesium-, kalsium-, mangaani-, rauta-, kupari-, sinkki-, kadmium-, elohopea-, lyijy- ja lantaani-ionit. Tutkittavat metallit oli valittu tähtäimessä olevien sovellusten, synteesissä ilmenneiden ongelmien tai ympäristönäkökohtien perusteella. Tulokset osoittavat näiden yhdisteiden metallinsitomiskyvyn olevan jonkin verran heikompi kuin EDTA:lla, mutta kuitenkin riittävän useisiin sovelluksiin kuten sellunvalkaisuprosessiin. Myrkyllisten raskasmetallien, kadmiumin, elohopen ja lyijyn kohdalla EDTA:a heikompi sitoutuminen on eduksikin, koska se yhdistettynä parempaan biohajoavuuteen saattaa alentaa tutkittujen yhdisteiden kykyä mobilisoida kyseisiä metalleja sedimenteistä. Useimmilla tutkituista yhdisteistä on ympäristönäkökulmasta etuna myös EDTA:a pienempi typpipitoisuus.

Puukaupan säännöt : Yksityismetsänomistajien ja metsäteollisuuden puukauppa Itä-Suomessa 1919 - 1939

The Finnish forest industry bought more than half of the timber used in factories and sawmills in the 1930s from non-industrial private forests (NIPF). This research investigates the rules conformed to this timber trade. The main research questions are: what were the rules that influenced the timber trade; and by whom they were set up? Attention is also paid to the factors which advanced the forest owners’ negotiation possibilities. A variety of sources were used: legal and company statutes, timber trade contracts, archives of the forest companies and organisations. Moreover, the written reminiscences collected by the Finnish Literature Society in the early 1970s were used to analyse the views of individual sellers and buyers. An institutional economics approach was applied as the theoretical framework of this study. In the timber trade the seller (forest owner) and the buyer (the employee of the forest company) agreed to the rules of the timber trade. They agreed about the amount and the price of the timber on sale, but also rules concerning, e.g., timber marking and harvesting. The forest companies had a strong control over the written contracts. Neither the private forest owners nor the forest organisations had much influence over these contracts. However, they managed to influence the rules which could not be found in the contracts. These written and unwritten rules regulated, for instance, the timber marking and measurement. The forest organisations such as Central Forestry Board Tapio (Keskusmetsäseura Tapio) and associations of forest owners (metsänhoitoyhdistykset) helped private forest owners in gaining more control over the timber marking. In timber marking, the forest owner selected trees to be included in the timber trade and gained more information, which he could use in the negotiations. The other rule, which was changed despite forest companies’ resistance, was the timber measurement. The Central Union of Agricultural Producers (MTK) negotiated with the Central Association of Finnish Woodworking Industries (SPKL) about changing the rules of the measurement practices. Even though SPKL did not support any changes, the new timber measurement law was accepted in the year 1938. The new law also created a supervisory authority to solve possible disagreements. Despite this the forest companies were still in charge of the measurement process in most cases. The private forest owners attained changes in the rules of the timber trade mainly during the 1930s. Earlier the relative weakness of the private forest organisations had diminished their negotiation positions. This changed in the 1930s as the private forest owners and their organisations became more active. At the same time the forest industry experienced a shortage of timber, especially pulp wood, and this provided the private forest owners with more leverage. Full-text (in Finnish) available at http://helda.helsinki.fi/handle/10224/4081

Thyroid Hormone Control of Cardiac Substrate Metabolism

Thyroid hormone (TH) plays an important role in maintaining a homeostasis in all the cells of our body. It also has significant cardiovascular effects, and abnormalities of its concentration can cause cardiovascular disease and even morbidity. Especially development of heart failure has been connected to low levels of thyroid hormone. A decrease in TH levels or TH-receptor binding adversely effects cardiac function. Although, this occurs in part through alterations in excitation-contraction and transport proteins, recent data from our laboratory indicate that TH also mediates changes in myocardial energy metabolism. Thyroid dysfunction may limit the heart s ability to shift substrate pathways and provide adequate energy supply during stress responses. Our goals of these studies were to determine substrate oxidation pattern in systemic and cardiac specific hypothyroidism at rest and at higher rates of oxygen demand. Additionally we investigated the TH mediated mechanisms in myocardial substrate selection and established the metabolic phenotype caused by a thyroid receptor dysfunction. We measured cardiac metabolism in an isolated heart model using 13Carbon isotopomer analyses with MR spectroscopy to determine function, oxygen consumption, fluxes and fractional contribution of acetyl-CoA to the citric acid cycle (CAC). Molecular pathways for changes in cardiac function and substrate shifts occurring during stress through thyroid receptor abnormalities were determined by protein analyses. Our results show that TH modifies substrate selection through nuclear-mediated and rapid posttranscriptional mechanisms. It modifies substrate selection differentially at rest and at higher rates of oxygen demand. Chronic TH deficiency depresses total CAC flux and selectively fatty acid flux, whereas acute TH supplementation decreases lactate oxidation. Insertion of a dominant negative thyroid receptor (Δ337T) alters metabolic phenotype and contractive efficiency in heart. The capability of the Δ337T heart to increase carbohydrate oxidation in response to stress seems to be limited. These studies provided a clearer understanding of the TH role in heart disease and shed light to identification of the molecular mechanisms that will facilitate in finding targets for heart failure prevention and treatment.