The Phraseology and Structure of Latin Building Inscriptions in Roman North Africa

This study analyses the diction of Latin building inscriptions. Despite its importance, this topic has rarely been discussed before: the most substantial contribution on the subject is a short dissertation by Klaus Gast (1965) that focuses on 100 inscriptions dating mostly from the Republican period. Marietta Horster (2001) also touched upon this theme in her thesis on imperial building inscriptions. I have collected my source material in North Africa because more Latin building inscriptions dating from the Imperial period have survived there than in any other area of the Roman Empire. By means of a thorough and independent survey, I have assembled all relevant African Latin building inscriptions datable to the Roman period (between 146 BC and AD 425), 1002 texts, into a corpus. These inscriptions are all fully edited in Appendix 1; Appendix 2 contains references to earlier editions. To facilitate search operations, both are also available in electronic form. They are downloadable from the address http://www.helsinki.fi/hum/kla/htm/jatkoopinnot.htm. Chapter one is an introduction dealing with the nature of building inscriptions as source material. Chapter two offers a statistical overview of the material. The following main section of the work falls into five chapters, each of which analyses one main part of a building inscription. An average building inscription can be divided into five parts: the starting phrase opens the inscription (a dedication to gods, for example), the subject part identifies the builder, the object part describes the constructed or repaired building, the predicate part records the building activity and the supplement part offers additional information on the project (it can specify the funding, for instance). These chapters are systematic and chronological and their purpose is to register and interpret the phrases used, to analyse reasons for their use and for their popularity among the different groups of builders. Chapter eight, which follows the main section of the work, creates a typology of building inscriptions based on their structure. It also presents the most frequently attested types of building inscriptions. The conclusion describes, on a general level, how the diction of building inscriptions developed during the period of study and how this striking development resulted from socio-economic changes that took place in Romano-African society during Antiquity. This study shows that the phraseology of building inscriptions had a clear correlation both with the type of builder and with the date of carving. Private builders tended to accentuate their participation (especially its financial side) in the project; honouring the emperor received more emphasis in the building inscriptions set up by communities; the texts produced by the army were concise. The chronological development is so clear that it enables stylistic dating. At the beginning of the imperial period the phrases were clear, concrete, formal and stereotyped but by Late Antiquity they have become vague, subjective, flexible, varied and even rhetorically or poetically coloured.

Teollisuuden ja yhteiskunnan palveluksessa : Arkkitehti Bertel Liljequist (1885 - 1954) tuotantolaitosten suunnittelijana maailmansotien välisenä aikana

My thesis concerns the plans drawn up by architect Bertel Liljequist (1885 1954) for an industrial corporation and a city in Finland during the interwar years. These were two quite different clients: the Kymi Company operating in Kuusankoski and the City of Helsinki. My study includes the micro-examination of the wider social issues involved. That the industrial community and factories in Kuusankoski be constructed correctly in a way supporting corporate strategy was of primary importance for the company s operations. Through the planning process for Helsinki s abattoirs, I show how a city dealt with the twin problems of hygiene and increasing demand for food resulting from a growth in population. I clarify how society and its economic, political and class structures affected the practice of architecture and its expression in the built environment. I analyse how the different backgrounds and starting points of the clients affected the construction projects under study and architect Bertel Liljequist s work. In studying Liljequist as an industrial designer, I have considered it vital to ascertain the client s intentions and objectives within the framework of the prevailing social situation. I examine the meanings the client wished the architecture to express and also to communicate to those working in the factory and the area as well as to the workers living on company land. The social outlook of the owners and management of Kymi Company implicitly affected the appearance of the factory. A brick fairface for the factories was a safe and natural material at the beginning of the 1920s when taking into consideration the events of the 1918 Civil War. To have built a White factory in the style of a defence building would have been provocative. Outside the factory gates, however, the company supported White architecture. The company used the factory buildings to manifest its power and the dwellings to bind the workers and make them loyal to the company. Architecture was thus one way in which the company manifested its position as the higher and undisputed authority. The role of the City of Helsinki within the planning process was for its officials to provide expert opinions but also to arrange study trips for the architect and the abattoir s general manager. The city also decided on the standard of the design. The city s responsibility for the health of its inhabitants and the requirements of modern meat production can be seen in the minimal architecture and clear functionality of the plant. The architecture left no doubt about the trustworthiness of the modern city. Translation: Michael Wynne-Ellis

Stone Weathering in the Monastic Building Complex on Mountain of St Aaron in Petra, Jordan.

Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.

Damp building moulds: Assessment of sensitization in patients and studies into mechanisms of airway inflammation using experimental models

Exposure to water-damaged buildings and the associated health problems have evoked concern and created confusion during the past 20 years. Individuals exposed to moisture problem buildings report adverse health effects such as non-specific respiratory symptoms. Microbes, especially fungi, growing on the damp material have been considered as potential sources of the health problems encountered in these buildings. Fungi and their airborne fungal spores contain allergens and secondary metabolites which may trigger allergic as well as inflammatory types of responses in the eyes and airways. Although epidemiological studies have revealed an association between damp buildings and health problems, no direct cause-and-effect relationship has been established. Further knowledge is needed about the epidemiology and the mechanisms leading to the symptoms associated with exposure to fungi. Two different approaches have been used in this thesis in order to investigate the diverse health effects associated with exposure to moulds. In the first part, sensitization to moulds was evaluated and potential cross-reactivity studied in patients attending a hospital for suspected allergy. In the second part, one typical mould known to be found in water-damaged buildings and to produce toxic secondary metabolites was used to study the airway responses in an experimental model. Exposure studies were performed on both naive and allergen sensitized mice. The first part of the study showed that mould allergy is rare and highly dependent on the atopic status of the examined individual. The prevalence of sensitization was 2.7% to Cladosporium herbarum and 2.8% to Alternaria alternata in patients, the majority of whom were atopic subjects. Some of the patients sensitized to mould suffered from atopic eczema. Frequently the patients were observed to possess specific serum IgE antibodies to a yeast present in the normal skin flora, Pityrosporum ovale. In some of these patients, the IgE binding was partly found to be due to binding to shared glycoproteins in the mould and yeast allergen extracts. The second part of the study revealed that exposure to Stachybotrys chartarum spores induced an airway inflammation in the lungs of mice. The inflammation was characterized by an influx of inflammatory cells, mainly neutrophils and lymphocytes, into the lungs but with almost no differences in airway responses seen between the satratoxin producing and non-satratoxin producing strain. On the other hand, when mice were exposed to S. chartarum and sensitized/challenged with ovalbumin the extent of the inflammation was markedly enhanced. A synergistic increase in the numbers of inflammatory cells was seen in BAL and severe inflammation was observed in the histological lung sections. In conclusion, the results in this thesis imply that exposure to moulds in water damaged buildings may trigger health effects in susceptible individuals. The symptoms can rarely be explained by IgE mediated allergy to moulds. Other non-allergic mechanisms seem to be involved. Stachybotrys chartarum is one of the moulds potentially responsible for health problems. In this thesis, new reaction models for the airway inflammation induced by S. chartarum have been found using experimental approaches. The immunological status played an important role in the airway inflammation, enhancing the effects of mould exposure. The results imply that sensitized individuals may be more susceptible to exposure to moulds than non-sensitized individuals.

Pelon ja toivon välissä : Pätkätyöläisen urakerronta

This study analyzes the forming of the occupational identity of the well-educated fixed-term employees. Fixed-term employment contracts amongst the well-educated labour force are exceptionally common in Finland as compared to other European countries. Two groups of modern fixed-term employees are distinguished. The first comprises well-educated women employed in the public sector whose fixed-term employment often consists of successive periods as temporary substitutes. The other group comprises well-educated, upper white-collar men aged over 40, whose fixed-term employment careers often consist of jobs of project nature or posts that are filled for a fixed period only. Method of the study For the empirical data I interviewed 35 persons (26 women and 9 men) in 33 interviews, one of which was conducted by e-mail and one was a group interview. All the interviews were electronically recorded and coded. All the interviewees have two things in common: fixed-term employment and formal high education. Thirteen (13) of them are researchers, four nurses, four midwives, four journalists, and ten project experts. I used the snowball method to get in touch the interviewees. The first interviewees were those who were recommended by the trade unions and by my personal acquaintances. These interviewees, in turn, recommended other potential interviewees. In addition, announcements on the internet pages of the trade unions were used to reach other interviewees. In analysing process I read the research material several times to find the turning points in the narrative the interviewees told. I also searched for the most meaningful stories told and the meaning the interviewees gave to these stories and to the whole narrative. In addition to that I paid attention to co-production of the narrative with the interviewees and analyzed the narrative as performance to be able to search for the preferred identities the interviewees perform. (Riesman 2001, 698-701). I do not pay much attention to the question of truth of a narrative in the sense of its correspondence with facts; rather I think a working life narrative has two tasks: On the one hand one has to tell the facts and on the other hand, he/she has to describe the meaning of these facts to herself/himself. To emphasize the double nature of the narrative about one’s working life I analyzed the empirical data both by categorizing it according to the cultural models of storytelling (heroic story, comedy, irony and tragedy) and by studying the themes most of the interviewees talked about. Ethics of the study I chose to use narrative within qualitative interviews on the grounds that in my opinion is more ethical and more empowering than the more traditional structured interview methods. During the research process I carefully followed the ethical rules of a qualitative research. The purpose of the interviews and the research was told to the interviewees by giving them a written description of the study. Oral permission to use the interview in this research was obtained from the interviewees. The names and places, which are mentioned in the study, are changed to conceal the actual identity of the interviewees. I shared the analysis with the interviewees by sending each of them the first analysis of their personal interview. This way I asked them to make sure that the identity was hidden well enough and hoped to give interviewees a chance to look at their narratives, to instigate new actions and sustain the present one (Smith 2001, 721). Also I hoped to enjoy a new possibility of joint authorship. Main results As a result of the study I introduce six models of telling a story. The four typical western cultural models that guide the telling are: heroic story, comedy, tragedy and satirical story (Hänninen 1999). In addition to these models I found two ways of telling a career filled with fixed-term employments that differ significantly from traditional career story telling. However, the story models in which the interviewees pour their experience locates the fixed term employers work career in an imagined life trajectory and reveals the meaning they give to it. I analyze the many sided heroic story that Liisa tells as an example of the strength of the fear of failing or losing the job the fixed term employee feels. By this structure it is also possible to show that success is felt to be entirely a matter of chance. Tragedy, the failure in one’s trial to get something, is a model I introduce with the help of Vilppu’s story. This narrative gets its meaning both from the sorrow of the failure in the past and the rise of something new the teller has found. Aino tells her story as a comedy. By introducing her narrative, I suggest that the purpose of the comedy, a stronger social consensus, gets deeper and darker shade by fixed-term employment: one who works as a fixed term employee has to take his/her place in his/her work community by him/herself without the support the community gives to those in permanent position. By studying the satiric model Rauno uses, I argue that using irony both turns the power structures to a carnival and builds free space to the teller of the story and to the listener. Irony also helps in building a consensus, mutual understanding, between the teller and the listener and it shows the distance the teller tells to exist between him and others. Irony, however, demands some kind of success in one’s occupational career but also at least a minor disappointment in the progress of it. Helmi tells her story merely as a detective story. By introducing Helmi’s narrative, I argue that this story model strengthens the trust in fairness of the society the teller and the listener share. The analysis also emphasizes the central position of identity work, which is caused by fixed-term employment. Most of the interviewees talked about getting along in working life. I introduced Sari’s narrative as an example of this. In both of these latter narratives one’s personal character and habits are lifted as permanent parts of the actual professional expertise, which in turn varies according to different situations. By introducing these models, I reveal that the fixed-term employees have different strategies to cope with their job situations and these strategies vary according to their personal motives and situations and the actual purpose of the interview. However, I argue that they feel the space between their hopes and fears narrow and unsecure. In the research report I also introduce pieces of the stories – themes – that the interviewees use to build these survival strategies. They use their personal curriculum vitae or portfolio, their position in work community and their work morals to build their professional identity. Professional identity is flexible and varies in time and place, but even then it offers a tool to fix one’s identity work into something. It offers a viewpoint to society and a tool to measure one’s position in surrounding social nets. As one result of the study I analyze the position the fixed-term employees share on the edge of their job communities. I summarize the hopes and fears the interviewees have concerning employers, trade unions, educational institutions and the whole society. In their opinion, the solidarity between people has been weakened by the short-sighted power of the economy. The impact the fixed-term employment has on one’s professional identity and social capital is a many-sided and versatile process. Fixed-term employment both strengthens and weakens the professional identity, social capital and the building of trust. Fixed-term employment also affects one’s day-to-day life by excluding her/him from the norm and by one’s difficulty in making long-term plans (Jokinen 2005). Regardless of the nature of the job contract, the workers themselves are experts in making the best of their sometimes less than satisfying work life and they also build their professional identity by using creatively their education, work experiences and interpersonal relations. However, a long career of short fixed-term employments may seriously change the perception of employee about his/her role. He/she may start concentrating only in coping in his/her unsatisfactory situation and leaves the active improvement of the lousy working conditions to other people. Keywords: narrative, fixed-tem employment, occupational identity, work, story model, social capital, career  

Global and EU governance for sustainable forest management with special reference to capacity building in Ethiopia and Southern Sudan

The purpose of this study was to produce information on and practical recommendations for informed decision-making on and capacity building for sustainable forest management (SFM) and good forest governance. This was done within the overall global framework for sustainable development with special emphasis on the EU and African frameworks and on Southern Sudan and Ethiopia in particular. The case studies on Southern Sudan and Ethiopia focused on local, national and regional issues. Moreover, this study attempted to provide both theoretical and practical new insight. The aim was to build an overall theoretical framework and to study its key contents and main implications for SFM and good forest governance at all administration levels, for providing new tools for capacity building in natural resources management. The theoretical framework and research approach were based on the original research problem and the general and specific aims of the study. The key elements of the framework encompass sustainable development, global and EU governance, sustainable forest management (SFM), good forest governance, as well as international and EU law. The selected research approach comprised matrix-based assessment of international, regional (EU and Africa) and national (Southern Sudan and Ethiopia) policy and legal documents. The specific case study on Southern Sudan also involved interviews and group discussions with local community members and government officials. As a whole, this study attempted to link the global, regional, national and local levels in forest-sector development and especially to analyse how the international policy development in environmental and forestry issues is reflected in field-level progress towards SFM and good forest governance, for the specific cases of Southern Sudan and Ethiopia. The results on Southern Sudan focused on the existing situation and perceived needs in capacity building for SFM and good forest governance at all administration levels. Specifically, the results of the case study on Southern Sudan presented the current situation in selected villages in the northern parts of Renk County in Upper Nile State, and the implications of Multilateral Environmental Agreements (MEAs) and of the new forest policy framework for capacity building actions. The results on Ethiopia focused on training, extension, research, education and new curriculum development within higher education institutions and particularly at the Wondo Genet College of Forestry and Natural Resources (WGCF-NR), which administratively lies under Hawassa University. The results suggest that, for both cases studies, informed decision-making on and capacity building for SFM and good forest governance require comprehensive, long-term, cross-sectoral, coherent and consistent approaches within the dynamic and evolving overall global framework, including its multiple inter-linked levels. The specific priority development and focus areas comprised the establishment of SFM and good forest governance in accordance with the overall sustainable development priorities and with more focus on the international trade in forest products that are derived from sustainable and legal sources with an emphasis on effective forest law enforcement and governance at all levels. In Upper Nile State in Southern Sudan there were positive development signals such as the will of the local people to plant more multipurpose trees on farmlands and range lands as well as the recognition of the importance of forests and trees for sustainable rural development where food security is a key element. In addition, it was evident that the local communities studied in Southern Sudan also wanted to establish good governance systems through partnerships with all actors and through increased local responsibilities. The results also suggest that the implementation of MEAs at the local level in Southern Sudan requires mutually supportive and coherent approaches within the agreements as well as significantly more resources and financial and technical assistance for capacity building, training and extension. Finally, the findings confirm the importance of full utilization of the existing local governance and management systems and their traditional and customary knowledge and practices, and of new development partnerships with full participation of all stakeholders. The planned new forest law for Southern Sudan, based on an already existing new forest policy, is expected to recognize the roles of local-level actors, and it would thus obviously facilitate the achieving of sustainable forest management.

A model Integrating the Facilities Management Process with the Building End User’s Business Process (ProFacil)

The ProFacil model is a generic process model defined as a framework model showing the links between the facilities management process and the building end user’s business process. The purpose of using the model is to support more detailed process modelling. The model has been developed using the IDEF0 modelling method. The ProFacil model describes business activities from the generalized point of view as management-, support-, and core processes and their relations. The model defines basic activities in the provision of a facility. Examples of these activities are “operate facilities”, “provide new facilities”, “provide re-build facilities”, “provide maintained facilities” and “perform dispose of facilities”. These are all generic activities providing a basis for a further specialisation of company specific FM activities and their tasks. A facilitator can establish a specialized process model using the ProFacil model and interacting with company experts to describe their company’s specific processes. These modelling seminars or interviews will be done in an informal way, supported by the high-level process model as a common reference.

Building Information Modelling – Experts´ Views on Standardisation and Industry Deployment

The goal of the single building information model has existed for at least thirty years and various standards have been published leading up to the ten-year development of the Industry Foundation Classes. These have been initiatives from researchers, software developers and standards committees. Now large property owners are becoming aware of the benefits of moving IT tools from specific applications towards more comprehensive solutions. This study addresses the state of Building Information Models and the conditions necessary for them to become more widely used. It is a qualitative study based on information from a number of international experts and has asked a series of questions about the feasibility of BIMs, the conditions necessary for their success, and the role of standards with particular reference to the IFCs. Some key statements were distilled from the diverse answers received and indicate that BIM solutions appear too complex for many and may need to be applied in limited areas initially. Standards are generally supported but not applied rigorously and a range of these are relevant to BIM. Benefits will depend upon the building procurement methods used and there should be special roles within the project team to manage information. Case studies are starting to appear and these could be used for publicity. The IFCs are rather oversold and their complexities should be hidden within simple-to-use software. Inevitably major questions remain and property owners may be the key to answering some of these. A framework for presenting standards, backed up by case studies of successful projects, is the solution proposed to provide better information on where particular BIM standards and solutions should be applied in building projects.

ISO 13567 - The Proposed International Standard for Structuring Layers in Computer Aided Building Design

Layering is a widely used method for structuring data in CAD-models. During the last few years national standardisation organisations, professional associations, user groups for particular CAD-systems, individual companies etc. have issued numerous standards and guidelines for the naming and structuring of layers in building design. In order to increase the integration of CAD data in the industry as a whole ISO recently decided to define an international standard for layer usage. The resulting standard proposal, ISO 13567, is a rather complex framework standard which strives to be more of a union than the least common denominator of the capabilities of existing guidelines. A number of principles have been followed in the design of the proposal. The first one is the separation of the conceptual organisation of information (semantics) from the way this information is coded (syntax). The second one is orthogonality - the fact that many ways of classifying information are independent of each other and can be applied in combinations. The third overriding principle is the reuse of existing national or international standards whenever appropriate. The fourth principle allows users to apply well-defined subsets of the overall superset of possible layernames. This article describes the semantic organisation of the standard proposal as well as its default syntax. Important information categories deal with the party responsible for the information, the type of building element shown, whether a layer contains the direct graphical description of a building part or additional information needed in an output drawing etc. Non-mandatory information categories facilitate the structuring of information in rebuilding projects, use of layers for spatial grouping in large multi-storey projects, and storing multiple representations intended for different drawing scales in the same model. Pilot testing of ISO 13567 is currently being carried out in a number of countries which have been involved in the definition of the standard. In the article two implementations, which have been carried out independently in Sweden and Finland, are described. The article concludes with a discussion of the benefits and possible drawbacks of the standard. Incremental development within the industry, (where ”best practice” can become ”common practice” via a standard such as ISO 13567), is contrasted with the more idealistic scenario of building product models. The relationship between CAD-layering, document management product modelling and building element classification is also discussed.

Use of Standards for CAD Layers in Building

One of the central issues in making efficient use of IT in the design, construction and maintenance of buildings is the sharing of the digital building data across disciplines and lifecycle stages. One technology which enables data sharing is CAD layering, which to be of real use requires the definition of standards. This paper focuses on the background, objectives and effectiveness of the International standard ISO 13567, Organisation and naming of layers for CAD. In particular the efficiency and effectiveness of the standardisation and standard implementation process are in focus, rather than the technical details. The study was conducted as a qualitative study with a number of experts who responded to a semi-structured mail questionnaire, supplemented by personal interviews. The main results were that CAD layer standards based on the ISO standard have been implemented, particularly in northern European countries, but are not very widely used. A major problem which was identified was the lack of resources for marketing and implementing the standard as national variations, once it had been formally accepted.

The international match: Metaphors as vehicles of social identity building in cross-border mergers

This article focuses on cultural identity-building in the cross-border merger context. To provide an alternative to the dominant essentialist analyses of cultures and cultural differences, cultural identitybuilding is conceptualized as a metaphoric process. The focus is on two processes inherent in the cross-border merger context: construction of images of Us and Them and construction of images of a Common Future. Based on an analysis of a special metaphor exercise carried out in a recent Finnish–Swedish merger, the article illustrates how the metaphoric perspective reveals specific cognitive, emotional and political aspects of cultural identity-building that easily remain ‘hidden’ in the case of more traditional approaches.

Jac. Ahrenberg ja historian perintö : Restaurointisuunnitelmat Viipurin ja Turun linnoihin 1800-luvun lopussa

Jac. Ahrenberg and Patrimony Restoration Plans for Viipuri and Turku Castles at the End of the 19th Century This dissertation examines the unrealized restoration plans for two castles in the Grand Duchy of Finland one located at Viipuri (Vyborg, nowadays in Russia), the other at Turku (in Swedish, Åbo) during the last decades of the 19th century. Both castles were used as prisons, barracks and warehouses. From the middle of the 19th century on, their restoration and transformation into museums and "national monuments" were demanded in the newspapers. The prison reform in the 1860s stimulated the documentation and debate concerning their future, but it was only at the beginning of the 1880s when their restoration became an official state-run project. The undertaking was carried out by Johan Jacob (Jac.) Ahrenberg (1847 1914), architect of the National Board of Public Buildings. By combining written sources with drawings and photographs, this dissertation examines the restoration projects, the two castles' significance and the ways in which they were investigated by scholars. The plans are analyzed in connection with restoration practices in France and Sweden and in the context of contemporary discussions concerning national art and patrimony. The thesis argues that these former castles of the Swedish crown were used to manifest the western roots of Finnish law and order, the lineage of power and the capacity of the nation to defend itself. However, because of their symbolism, their restoration became a politically delicate question concerning the role of the Swedish heritage in Finland's nation-building process. According to Jac. Ahrenberg's plans, the two castles were to be restored to their assumed appearance at the time of the Vasa dynasty. Consequently, the structures would have resembled castles in Sweden. It is suggested that one aim of the restoration plans was to transform the two buildings into monuments testifying to the common history of Sweden and Finland. They were meant to consolidate the Swedish basis of Finnish culture and autonomy and thus to secure them against the threatening implications of Russian imperialism. It seems that along with the changing ideals of architectural restoration and the need for an original Finnish architectural heritage, the political connotations associated with the castles were one reason why Jac. Ahrenberg's restoration plans were never realized.