Disabled Revolutionary War Veterans and the Construction of Disability in the Early United States, c. 1776-1840

This thesis addresses the following broad research question: what did it mean to be a disabled Revolutionary War veteran in the early United States during the period from 1776 to roughly 1840? The study approaches the question from two angles: a state-centred one and an experiential one. In both cases, the theoretical framework employed comes from disability studies. Consequently, disability is regarded as a sociocultural phenomenon rather than a medical condition. The state-centred dimension of the study explores the meaning of disability and disabled veterans to the early American state through an examination of the major military pension laws of the period. An analysis of this legislation, particularly the invalid pension acts of 1793 and 1806, indicates that the early United States represents a key period in the development of the modern disability category. The experiential approach, in contrast, shifts the focus of attention away from the state towards the lived experiences of disabled veterans. It seeks to address the issue of whether or not the disabilities of disabled veterans had any significant material impact on their everyday lives. It does this through a comparison of the situation of 153 disabled veterans with that of an equivalent number of nondisabled veterans. The former group received invalid pensions while the latter did not. In comparing the material conditions of disabled and nondisabled veterans, a wide range of primary sources from military records to memoirs and letters are used. The most important sources in this regard are the pension application papers submitted by veterans in the early nineteenth century. These provide us with a unique insight into the everyday lives of veterans. Looking at the issue of experience through the window of the pension files reveals that there was not much difference in the broad contours of disabled and nondisabled veteran life. This finding has implications for the theorisation of disability that are highlighted and discussed in the thesis. The main themes covered in this study are: the wartime experiences of injured American soldiers, the military pension establishment of the early United States and the legal construction of disability, and the post-war working and family lives of disabled veterans. Keywords: disability, early America, veterans, military pensions, disabled people, Revolutionary War, United States, disability theory.

Ruumiillinen esine, materiaalinen suku : Tutkimus Pyhä Anna itse kolmantena -aiheisista keskiajan puuveistoksista Suomessa

Embobied Object, Material Family. Late-Medieval Wood Sculptures Depicting Saint Anne with the Virgin and Child in Finland Saint Anne, the mother of the Virgin Mary, was one of the most popular saints in Western Europe in the late Middle Ages. She was often depicted with two other figures, the Virgin and the Christ Child (Anna Selbdritt). The dissertation examines the polychrome wood sculptures showing this motif, with a special focus on those remaining in Finland. It investigates the meanings these sculptures had to their observers in the fifteenth-century Finland. The study sheds light to important material heritage which is little known and offers new insights into the cult and imagery of the holy grandmother. Methodologically the study is based on iconology and post-formalist art history, and it appropriates concepts such as spatiality, sanctity, corporeality, and gender. Taking a comparative approach it knits together larger tendencies and local people and incidents. By conflating methodological domains it renews the ways how fragmentary wood sculptures, lacking documentary written sources, can be contextually interpreted and comprehended. The sculptures are analyzed from three angles. Firstly, the study explores the sculptures by focusing on their materiality and facture, which is to consider them as records of their own making. The analysis provides new information concerning the quantity, location, and current condition of the sculptures and it also elucidates problems regarding attribution, dating, display, and craftsmanship. The book presents the results of the empirical study of 45 Saint Anne groups; these works are individually described in the large Appendix. Secondly, the works are contextualized to the specific historical conditions in which they were observed. The study discusses closely the circumstances in the Turku Cathedral around the shrine of Saint Anne, the popular belief, and the piety of individual persons. The sculptures, deemed as the embodiments of the holy characters, interacted with the devotees. Thirdly, the works are examined within the wider theological and ideological currents of the era centered on the body and Incarnation. Saint Anne with the Virgin and Child motif demonstrated the Carnal Trinity, the motherly side of the Holy Trinity. The dissertation argues that Saint Anne was interpreted as the female counterpart or, in a mythical sense, wife of God. Furthermore, the Child s implicit, simultaneous presence as a suffering or dead man imbues the sculptures with a sense of the Passion, thus associating them with the pietà and the Mater dolorosa motifs. The naked Christ Child underlines him as the offering and, eventually, the Eucharistic wafer. The study suggests that the sculptures mediate continuity and the bloodline between the generations by the intertwined and repeated gestures, clothing and positions of the portrayed figures. Regardless of the ostensible homeliness of the sculptures, so readily reiterated by earlier scholars, these sculptures represented creation and birth through the carnal yet holy mothers.

Ajan sisäkkäiset tilat. Arkkitehtuuri, valokuva ja menneisyyden esittäminen W. G. Sebaldin romaanissa Austerlitz

In her thesis, Kaisa Kaakinen analyzes how the German emigrant author W. G. Sebald (1944-2001) uses architecture and photography in his last novel "Austerlitz" to represent time, history and remembering. Sebald describes time in spatial terms: it is like a building, the rooms and chambers of which are connected to each other. The poetics of spatial time manifests itself on multiple levels of the text. Kaakinen traces it in architectural representations, photographic images, intertextuality, as well as in the form of the text, using the concept of spatial form by Joseph Frank. Architectural and photographic representations serve as meeting points for different aspects and angles of the novel and illustrate the idea of a layered present that has multiple connections to the past. The novel tells a story of Jacques Austerlitz, who as a small child was sent from Prague to Britain in one of the so-called Kindertransports that saved children from Central Europe occupied by the National Socialists. Only gradually he remembers his Jewish parents, who have most likely perished in Nazi concentration camps. The novel brings the problematic of writing about another person's past to the fore by the fact that Austerlitz's story is told by an anonymous narrator, Austerlitz's interlocutor, who listens to and writes down Austerlitz's story. Kaakinen devotes the final part of her thesis to study the demands of representing a historical trauma, drawing on authors such as Dominick LaCapra and Michael Rothberg. Through the analysis of architectural and photographic representations in the novel, she demonstrates how Austerlitz highlights the sense of singularity and inaccessibility of memories of an individual, while also stressing the necessity - and therefore a certain kind of possibility - of passing these memories to another person. The coexistence of traumatic narrowness and of the infinity of history is reflected in ambivalent buildings. Some buildings in the novel resemble reversible figures: they can be perceived simultaneously as ruins and as construction sites. Buildings are also shown to be able to both cover and preserve memories - an idea that also is repeated in the use of photography, which tends to both replace memories and cause an experience of the presence of an absent thing. Commenting and critisizing some recent studies on Sebald, the author develops a reading which stresses the ambivalence inherent in Sebald's view on history and historiography. Austerlitz shows the need to recognize the inevitable absence of the past as well as the distance from the experiences of others. Equally important, however, is the refusal to give up narrating the past: Sebald's novel stresses the necessity to preserve the sites of the past, which carry silent traces of vanished life. The poetics of Austerlitz reflects the paradox of the simultaneous impossibility and indispensability of writing history.

Suunnittelunäkemys metsäorganisaatioissa ja sen vaikutus tietojärjestelmälle asetettaviin vaatimuksiin

Department of Forest Resource Management in the University of Helsinki has in years 2004?2007 carried out so-called SIMO -project to develop a new generation planning system for forest management. Project parties are organisations doing most of Finnish forest planning in government, industry and private owned forests. Aim of this study was to find out the needs and requirements for new forest planning system and to clarify how parties see targets and processes in today's forest planning. Representatives responsible for forest planning in each organisation were interviewed one by one. According to study the stand-based system for managing and treating forests continues in the future. Because of variable data acquisition methods with different accuracy and sources, and development of single tree interpretation, more and more forest data is collected without field work. The benefits of using more specific forest data also calls for use of information units smaller than tree stand. In Finland the traditional way to arrange forest planning computation is divided in two elements. After updating the forest data to present situation every stand unit's growth is simulated with different alternative treatment schedule. After simulation, optimisation selects for every stand one treatment schedule so that the management program satisfies the owner's goals in the best possible way. This arrangement will be maintained in the future system. The parties' requirements to add multi-criteria problem solving, group decision support methods as well as heuristic and spatial optimisation into system make the programming work more challenging. Generally the new system is expected to be adjustable and transparent. Strict documentation and free source code helps to bring these expectations into effect. Variable growing models and treatment schedules with different source information, accuracy, methods and the speed of processing are supposed to work easily in system. Also possibilities to calibrate models regionally and to set local parameters changing in time are required. In future the forest planning system will be integrated in comprehensive data management systems together with geographic, economic and work supervision information. This requires a modular method of implementing the system and the use of a simple data transmission interface between modules and together with other systems. No major differences in parties' view of the systems requirements were noticed in this study. Rather the interviews completed the full picture from slightly different angles. In organisation the forest management is considered quite inflexible and it only draws the strategic lines. It does not yet have a role in operative activity, although the need and benefits of team level forest planning are admitted. Demands and opportunities of variable forest data, new planning goals and development of information technology are known. Party organisations want to keep on track with development. One example is the engagement in extensive SIMO-project which connects the whole field of forest planning in Finland.

Modifications of surface materials and their effects on cleanability as studied by radiochemical methods

Modifications of surface materials and their effects on cleanability have important impacts in many fields of activity. In this study the primary aim was to develop radiochemical methods suitable for evaluating cleanability in material research for different environments. Another aim was to investigate the effects of surface modifications on cleanabilitity and surface properties of plastics, ceramics, concrete materials and also their coatings in conditions simulating their typical environments. Several new 51Cr and 14C labelled soils were developed for testing situations. The new radiochemical methods developed were suitable for examining different surface materials and different soil types, providing quantitative information about the amount of soil on surfaces. They also take into account soil soaked into surfaces. The supporting methods colorimetric determination and ATP bioluminescence provided semi-quantitative results. The results from the radiochemical and supporting methods partly correlated with each other. From a material research point of view numerous new materials were evaluated. These included both laboratory-made model materials and commercial products. Increasing the amount of plasticizer decreased the cleanability of poly(vinyl chloride) (PVC) materials. Microstructured surfaces of plastics improved the cleanability of PVC from particle soils, whereas for oil soil microstructuring reduced the cleanability. In the case of glazed ceramic materials, coatings affected the cleanability. The roughness of surfaces correlated with cleanability from particle soils and the cleanability from oil soil correlated with the contact angles. Organic particle soil was removed more efficiently from TiO2-coated ceramic surfaces after UV-radiation than without UV treatment, whereas no effect was observed on the cleanability of oil soil. Coatings improved the cleanability of concrete flooring materials intended for use in animal houses.

Polymer Protected Gold Nanoparticles

Polymer protected gold nanoparticles have successfully been synthesized by both "grafting-from" and "grafting-to" techniques. The synthesis methods of the gold particles were systematically studied. Two chemically different homopolymers were used to protect gold particles: thermo-responsive poly(N-isopropylacrylamide), PNIPAM, and polystyrene, PS. Both polymers were synthesized by using a controlled/living radical polymerization process, reversible addition-fragmentation chain transfer (RAFT) polymerization, to obtain monodisperse polymers of various molar masses and carrying dithiobenzoate end groups. Hence, particles protected either with PNIPAM, PNIPAM-AuNPs, or with a mixture of two polymers, PNIPAM/PS-AuNPs (i.e., amphiphilic gold nanoparticles), were prepared. The particles contain monodisperse polymer shells, though the cores are somewhat polydisperse. Aqueous PNIPAM-AuNPs prepared using a "grafting-from" technique, show thermo-responsive properties derived from the tethered PNIPAM chains. For PNIPAM-AuNPs prepared using a "grafting-to" technique, two-phase transitions of PNIPAM were observed in the microcalorimetric studies of the aqueous solutions. The first transition with a sharp and narrow endothermic peak occurs at lower temperature, and the second one with a broader peak at higher temperature. In the first transition PNIPAM segments show much higher cooperativity than in the second one. The observations are tentatively rationalized by assuming that the PNIPAM brush can be subdivided into two zones, an inner and an outer one. In the inner zone, the PNIPAM segments are close to the gold surface, densely packed, less hydrated, and undergo the first transition. In the outer zone, on the other hand, the PNIPAM segments are looser and more hydrated, adopt a restricted random coil conformation, and show a phase transition, which is dependent on both particle concentration and the chemical nature of the end groups of the PNIPAM chains. Monolayers of the amphiphilic gold nanoparticles at the air-water interface show several characteristic regions upon compression in a Langmuir trough at room temperature. These can be attributed to the polymer conformational transitions from a pancake to a brush. Also, the compression isotherms show temperature dependence due to the thermo-responsive properties of the tethered PNIPAM chains. The films were successfully deposited on substrates by Langmuir-Blodgett technique. The sessile drop contact angle measurements conducted on both sides of the monolayer deposited at room temperature reveal two slightly different contact angles, that may indicate phase separation between the tethered PNIPAM and PS chains on the gold core. The optical properties of amphiphilic gold nanoparticles were studied both in situ at the air-water interface and on the deposited films. The in situ SPR band of the monolayer shows a blue shift with compression, while a red shift with the deposition cycle occurs in the deposited films. The blue shift is compression-induced and closely related to the conformational change of the tethered PNIPAM chains, which may cause a decrease in the polarity of the local environment of the gold cores. The red shift in the deposited films is due to a weak interparticle coupling between adjacent particles. Temperature effects on the SPR band in both cases were also investigated. In the in situ case, at a constant surface pressure, an increase in temperature leads to a red shift in the SPR, likely due to the shrinking of the tethered PNIPAM chains, as well as to a slight decrease of the distance between the adjacent particles resulting in an increase in the interparticle coupling. However, in the case of the deposited films, the SPR band red-shifts with the deposition cycles more at a high temperature than at a low temperature. This is because the compressibility of the polymer coated gold nanoparticles at a high temperature leads to a smaller interparticle distance, resulting in an increase of the interparticle coupling in the deposited multilayers.

Small State Cultures of Consensus : State Traditions and Consensus-Seeking in the Neo-Corporatist and Neutrality Policies in Post-1945 Austria and Finland

Austria and Finland are persistently referred to as the “success stories” of post-1945 European history. Notwithstanding their different points of departure, in the course of the Cold War both countries portrayed themselves as small and neutral border-states in the world dictated by superpower politics. By the 1970s, both countries frequently ranked at the top end in various international classifications regarding economic development and well-being in society. This trend continues today. The study takes under scrutiny the concept of consensus which figures centrally in the two national narratives of post-1945 success. Given that the two domestic contexts as such only share few direct links with one another and are more obviously different than similar in terms of their geographical location, historical experiences and politico-cultural traditions, the analogies and variations in the anatomies of the post-1945 “cultures of consensus” provide an interesting topic for a historical comparative and cross-national examination. The main research question concerns the identification and analysis of the conceptual and procedural convergence points of the concepts of the state and consensus. The thesis is divided into six main chapters. After the introduction, the second chapter presents the theoretical framework in more detail by focusing on the key concepts of the study – the state and consensus. Chapter two also introduces the comparative historical and cross-national research angles. Chapter three grounds the key concepts of the state and consensus in the historical contexts of Austria and Finland by discussing the state, the nation and democracy in a longer term comparative perspective. The fourth and fifth chapter present case studies on the two policy fields, the “pillars”, upon which the post-1945 Austrian and Finnish cultures of consensus are argued to have rested. Chapter four deals with neo-corporatist features in the economic policy making and chapter five discusses the building up of domestic consensus regarding the key concepts of neutrality policies in the 1950s and 1960s. The study concludes that it was not consensus as such but the strikingly intense preoccupation with the theme of domestic consensus that cross-cut, in a curiously analogous manner, the policy-making processes studied. The main challenge for the post-1945 architects of Austrian and Finnish cultures of consensus was to find strategies and concepts for consensus-building which would be compatible with the principles of democracy. Discussed at the level of procedures, the most important finding of the study concerns the triangular mechanism of coordination, consultation and cooperation that set into motion and facilitated a new type of search for consensus in both post-war societies. In this triangle, the agency of the state was central, though in varying ways. The new conceptions concerning a small state’s position in the Cold War world also prompted cross-nationally perceivable willingness to reconsider inherited concepts and procedures of the state and the nation. At the same time, the ways of understanding the role of the state and its relation to society remained profoundly different in Austria and Finland and this basic difference was in many ways reflected in the concepts and procedures deployed in the search for consensus and management of domestic conflicts. For more detailed information, please consult the author.

Planar Edgeless Detectors for the TOTEM Experiment at the LHC

The TOTEM experiment at the LHC will measure the total proton-proton cross-section with a precision better than 1%, elastic proton scattering over a wide range in momentum transfer -t= p^2 theta^2 up to 10 GeV^2 and diffractive dissociation, including single, double and central diffraction topologies. The total cross-section will be measured with the luminosity independent method that requires the simultaneous measurements of the total inelastic rate and the elastic proton scattering down to four-momentum transfers of a few 10^-3 GeV^2, corresponding to leading protons scattered in angles of microradians from the interaction point. This will be achieved using silicon microstrip detectors, which offer attractive properties such as good spatial resolution (<20 um), fast response (O(10ns)) to particles and radiation hardness up to 10^14 "n"/cm^2. This work reports about the development of an innovative structure at the detector edge reducing the conventional dead width of 0.5-1 mm to 50-60 um, compatible with the requirements of the experiment.

On the mechanical behavior of compacted pack ice : A theoretical and numerical investigation

Pack ice is an aggregate of ice floes drifting on the sea surface. The forces controlling the motion and deformation of pack ice are air and water drag forces, sea surface tilt, Coriolis force and the internal force due to the interaction between ice floes. In this thesis, the mechanical behavior of compacted pack ice is investigated using theoretical and numerical methods, focusing on the three basic material properties: compressive strength, yield curve and flow rule. A high-resolution three-category sea ice model is applied to investigate the sea ice dynamics in two small basins, the whole Gulf Riga and the inside Pärnu Bay, focusing on the calibration of the compressive strength for thin ice. These two basins are on the scales of 100 km and 20 km, respectively, with typical ice thickness of 10-30 cm. The model is found capable of capturing the main characteristics of the ice dynamics. The compressive strength is calibrated to be about 30 kPa, consistent with the values from most large-scale sea ice dynamic studies. In addition, the numerical study in Pärnu Bay suggests that the shear strength drops significantly when the ice-floe size markedly decreases. A characteristic inversion method is developed to probe the yield curve of compacted pack ice. The basis of this method is the relationship between the intersection angle of linear kinematic features (LKFs) in sea ice and the slope of the yield curve. A summary of the observed LKFs shows that they can be basically divided into three groups: intersecting leads, uniaxial opening leads and uniaxial pressure ridges. Based on the available observed angles, the yield curve is determined to be a curved diamond. Comparisons of this yield curve with those from other methods show that it possesses almost all the advantages identified by the other methods. A new constitutive law is proposed, where the yield curve is a diamond and the flow rule is a combination of the normal and co-axial flow rule. The non-normal co-axial flow rule is necessary for the Coulombic yield constraint. This constitutive law not only captures the main features of forming LKFs but also takes the advantage of avoiding overestimating divergence during shear deformation. Moreover, this study provides a method for observing the flow rule for pack ice during deformation.

Scattering and Refraction as Contrast Mechanisms in X-Ray Imaging

Differentiation of various types of soft tissues is of high importance in medical imaging, because changes in soft tissue structure are often associated with pathologies, such as cancer. However, the densities of different soft tissues may be very similar, making it difficult to distinguish them in absorption images. This is especially true when the consideration of patient dose limits the available signal-to-noise ratio. Refraction is more sensitive than absorption to changes in the density, and small angle x-ray scattering on the other hand contains information about the macromolecular structure of the tissues. Both of these can be used as potential sources of contrast when soft tissues are imaged, but little is known about the visibility of the signals in realistic imaging situations. In this work the visibility of small-angle scattering and refraction in the context of medical imaging has been studied using computational methods. The work focuses on the study of analyzer based imaging, where the information about the sample is recorded in the rocking curve of the analyzer crystal. Computational phantoms based on simple geometrical shapes with differing material properties are used. The objects have realistic dimensions and attenuation properties that could be encountered in real imaging situations. The scattering properties mimic various features of measured small-angle scattering curves. Ray-tracing methods are used to calculate the refraction and attenuation of the beam, and a scattering halo is accumulated, including the effect of multiple scattering. The changes in the shape of the rocking curve are analyzed with different methods, including diffraction enhanced imaging (DEI), extended DEI (E-DEI) and multiple image radiography (MIR). A wide angle DEI, called W-DEI, is introduced and its performance is compared with that of the established methods. The results indicate that the differences in scattered intensities from healthy and malignant breast tissues are distinguishable to some extent with reasonable dose. Especially the fraction of total scattering has large enough differences that it can serve as a useful source of contrast. The peaks related to the macromolecular structure come to angles that are rather large, and have intensities that are only a small fraction of the total scattered intensity. It is found that such peaks seem to have only limited usefulness in medical imaging. It is also found that W-DEI performs rather well when most of the intensity remains in the direct beam, indicating that dark field imaging methods may produce the best results when scattering is weak. Altogether, it is found that the analysis of scattered intensity is a viable option even in medical imaging where the patient dose is the limiting factor.

Consequences of Supersymmetry in the Early Universe

Currently, we live in an era characterized by the completion and first runs of the LHC accelerator at CERN, which is hoped to provide the first experimental hints of what lies beyond the Standard Model of particle physics. In addition, the last decade has witnessed a new dawn of cosmology, where it has truly emerged as a precision science. Largely due to the WMAP measurements of the cosmic microwave background, we now believe to have quantitative control of much of the history of our universe. These two experimental windows offer us not only an unprecedented view of the smallest and largest structures of the universe, but also a glimpse at the very first moments in its history. At the same time, they require the theorists to focus on the fundamental challenges awaiting at the boundary of high energy particle physics and cosmology. What were the contents and properties of matter in the early universe? How is one to describe its interactions? What kind of implications do the various models of physics beyond the Standard Model have on the subsequent evolution of the universe? In this thesis, we explore the connection between in particular supersymmetric theories and the evolution of the early universe. First, we provide the reader with a general introduction to modern day particle cosmology from two angles: on one hand by reviewing our current knowledge of the history of the early universe, and on the other hand by introducing the basics of supersymmetry and its derivatives. Subsequently, with the help of the developed tools, we direct the attention to the specific questions addressed in the three original articles that form the main scientific contents of the thesis. Each of these papers concerns a distinct cosmological problem, ranging from the generation of the matter-antimatter asymmetry to inflation, and finally to the origin or very early stage of the universe. They nevertheless share a common factor in their use of the machinery of supersymmetric theories to address open questions in the corresponding cosmological models.

Characterisation of properties of coniferous wood tracheids by x-ray diffraction, laser scattering and microscopy

In recent years there has been growing interest in selecting suitable wood raw material to increase end product quality and to increase the efficiency of industrial processes. Genetic background and growing conditions are known to affect properties of growing trees, but only a few parameters reflecting wood quality, such as volume and density can be measured on an industrial scale. Therefore research on cellular level structures of trees grown in different conditions is needed to increase understanding of the growth process of trees leading to desired wood properties. In this work the cellular and cell wall structures of wood were studied. Parameters, such as the mean microfibril angle (MFA), the spiral grain angles, the fibre length, the tracheid cell wall thickness and the cross-sectional shape of the tracheid, were determined as a function of distance from the pith towards the bark and mutual dependencies of these parameters were discussed. Samples from fast-grown trees, which belong to a same clone, grown in fertile soil and also from fertilised trees were measured. It was found that in fast-grown trees the mean MFA decreased more gradually from the pith to the bark than in reference stems. In fast-grown samples cells were shorter, more thin-walled and their cross-sections were rounder than in slower-grown reference trees. Increased growth rate was found to cause an increase in spiral grain variation both within and between annual rings. Furthermore, methods for determination of the mean MFA using x-ray diffraction were evaluated. Several experimental arrangements including the synchrotron radiation based microdiffraction were compared. For evaluation of the data analysis procedures a general form for diffraction conditions in terms of angles describing the fibre orientation and the shape of the cell was derived. The effects of these parameters on the obtained microfibril angles were discussed. The use of symmetrical transmission geometry and tangentially cut samples gave the most reliable MFA values.

Factors controlling the surface energy budget over snow and ice

Polar Regions are an energy sink of the Earth system, as the Sun rays do not reach the Poles for half of the year, and hit them only at very low angles for the other half of the year. In summer, solar radiation is the dominant energy source for the Polar areas, therefore even small changes in the surface albedo strongly affect the surface energy balance and, thus, the speed and amount of snow and ice melting. In winter, the main heat sources for the atmosphere are the cyclones approaching from lower latitudes, and the atmosphere-surface heat transfer takes place through turbulent mixing and longwave radiation, the latter dominated by clouds. The aim of this thesis is to improve the knowledge about the surface and atmospheric processes that control the surface energy budget over snow and ice, with particular focus on albedo during the spring and summer seasons, on horizontal advection of heat, cloud longwave forcing, and turbulent mixing during the winter season. The critical importance of a correct albedo representation in models is illustrated through the analysis of the causes for the errors in the surface and near-surface air temperature produced in a short-range numerical weather forecast by the HIRLAM model. Then, the daily and seasonal variability of snow and ice albedo have been examined by analysing field measurements of albedo, carried out in different environments. On the basis of the data analysis, simple albedo parameterizations have been derived, which can be implemented into thermodynamic sea ice models, as well as numerical weather prediction and climate models. Field measurements of radiation and turbulent fluxes over the Bay of Bothnia (Baltic Sea) also allowed examining the impact of a large albedo change during the melting season on surface energy and ice mass budgets. When high contrasts in surface albedo are present, as in the case of snow covered areas next to open water, the effect of the surface albedo heterogeneity on the downwelling solar irradiance under overcast condition is very significant, although it is usually not accounted for in single column radiative transfer calculations. To account for this effect, an effective albedo parameterization based on three-dimensional Monte Carlo radiative transfer calculations has been developed. To test a potentially relevant application of the effective albedo parameterization, its performance in the ground-based retrieval of cloud optical depth was illustrated. Finally, the factors causing the large variations of the surface and near-surface temperatures over the Central Arctic during winter were examined. The relative importance of cloud radiative forcing, turbulent mixing, and lateral heat advection on the Arctic surface temperature were quantified through the analysis of direct observations from Russian drifting ice stations, with the lateral heat advection calculated from reanalysis products.

Multiwavelength studies of regolith effects in planetary remote sensing

A large proportion of our knowledge about the surfaces of atmosphereless solar-system bodies is obtained through remote-sensing measurements. The measurements can be carried out either as ground-based telescopic observations or space-based observations from orbiting spacecraft. In both cases, the measurement geometry normally varies during the observations due to the orbital motion of the target body, the spacecraft, etc.. As a result, the data are acquired over a variety of viewing and illumination angles. Surfaces of planetary bodies are usually covered with a layer of loose, broken-up rock material called the regolith whose physical properties affect the directional dependence of remote-sensed measurements. It is of utmost importance for correct interpretation of the remote-sensed data to understand the processes behind this alteration. In the thesis, the multi-angular effects that the physical properties of the regolith have on remote-sensing measurements are studied in two regimes of electromagnetic radiation, visible to near infrared and soft X-rays. These effects are here termed generally the regolith effects in remote sensing. Although the physical mechanisms that are important in these regions are largely different, notable similarities arise in the methodology that is used in the study of the regolith effects, including the characterization of the regolith both in experimental studies and in numerical simulations. Several novel experimental setups have been constructed for the thesis. Alongside the experimental work, theoretical modelling has been carried out, and results from both approaches are presented. Modelling of the directional behaviour of light scattered from a regolith is utilized to obtain shape and spin-state information of several asteroids from telescopic observations and to assess the surface roughness and single-scattering properties of lunar maria from spacecraft observations. One of the main conclusions is that the azimuthal direction is an important factor in detailed studies of planetary surfaces. In addition, even a single parameter, such as porosity, can alter the light scattering properties of a regolith significantly. Surface roughness of the regolith is found to alter the elemental fluorescence line ratios of a surface obtained through planetary soft X-ray spectrometry. The results presented in the thesis are among the first to report this phenomenon. Regolith effects need to be taken into account in the analysis of remote-sensed data, providing opportunities for retrieving physical parameters of the surface through inverse methods.

Lastensuojelun sosiaalityö asiakirjoina : Dokumentoinnin ja tiedonmuodostuksen dynamiikka

Tutkimuksen keskeinen tehtävä on selvittää, mikä on dokumentoinnin merkitys lastensuojelun sosiaalityön tiedonmuodostuksessa ja ammattikäytännöissä. Asiakirjateksteistä koostuvaa tutkimusaineistoa tarkastellaan kolmesta eri suunnasta kysymällä: 1)Miten asiakirjoja kirjoitetaan? 2) Mitä asiakirjoihin kirjoitetaan? 3) Miksi asiakirjoja kirjoitetaan niin kuin kirjoitetaan? Tutkimusaineisto muodostuu lastensuojelun sosiaalityöntekijöiden laatimista asiakastietojärjestelmään tallennetuista muistiinpanoista ja huostaanottopäätöksistä. Tutkimukseen on valittu 20 huostaanotetun eri-ikäisen lapsen ja heidän perheensä asiakirjat yhteensä 1613 asiakirjatulostussivua. Tekstit ajoittuvat vuodesta 1989 vuoteen 2000. Tutkimusmenetelmä on diskurssianalyyttinen ja tukeutuu Fairclough`n (1997)esittämään kolmiulotteiseen malliin, jossa diskurssi määritellään tekstin, käytäntöjen ja sosiokulttuurisen ympäristön suhteeksi. Diskurssianalyysi on näiden rakenteiden ja niiden välisten suhteiden kuvaamista, tulkintaa ja selittämistä. Fairclough’n mallia mukaillen tutkimuksen analyysi koostuu retoriikan ja tematiikan analyyseistä sekä pragmatiikan näkökulman sisältävästä tarkastelusta. Asiakirjatekstien pilkkominen puhujakategorioihin osoitti tekstien olevan moniäänisiä, useiden henkilöiden näkemyksiä ja mielipiteitä sisältäviä tekstipintoja. Retoriikan analyysi näytti, että lastensuojelun sosiaalityön asiakirjat sisältävät paljon dynaamisia kuvauksia työstä. Asiakirjojen kirjoittaminen moniäänisiksi tuo tekstiin uskottavuutta, ja se on myös yksi retorinen vaikuttamiskeino. Tematiikan tarkastelu osoitti,että asiakirjojen sisällölliset teemat (lapsen hoiva, arjen hallinta, yhteistyö ja päihteiden käyttö) ja kokemukselliset teemat (huoli, vastuu, yhteys ja moraali) toistuvat sisäkkäisinä ja päällekkäisinä säikeinä dynaamisesti vaihdellen. Sosiaalityöntekijät kirjaavat teksteihin monia yhtäaikaisia teemoja, joiden avulla rakentavat ammatillista ymmärrystä kyseessä olevasta tilanteesta. Asiakirjojen tutkiminen pragmatiikan suunnasta toi esiin, kirjoittamisen ja lukemisen kontekstiulottuvuudet sekä tiedonmuodostusprosessin. Asiakirjojen laatiminen on osa sosiaalityön käytäntöjä. Se on myös keskeinen alue ammattikunnan yhteisen ammatillisen ymmärryksen luomisessa ja ylläpitämisessä. Muistiinpanot, huostaanottopäätökset ja lakitekstit ovat intertekstuaalisia. Lastensuojelun sosiaalityön asiakirjojen tutkiminen on avannut uusia mahdollisuuksia ymmärtää sosiaalityön dokumentointiprosessia, merkitystä ja roolia sekä tiedonmuodostuksen dynamiikkaa. Tekstien kirjoittaminen, niiden lukeminen, tietojen siirtäminen ja asiakkaan kuuleminen samoin kuin kuulemisen kirjaaminen ovat sosiaalityön dokumentoinnin keskeisiä haasteita. Tutkimus pyrkii avaamaan ymmärrystä asiakirjatekstien monivivahteiseen ja dynaamiseen maailmaan ja siten myös sosiaalityön dokumentoinnin arkeen. Tarkastelut mahdollistavat työn kehittämisen erityisesti sosiaalityön asiakasvaikuttavuuden mittaamisen ja parantamisen suuntaan. Asiakirjoissa ilmenevä tiedonmuodostuksen dynamiikka syntyy kirjoittamiskäytäntöjen, kirjoittamisen ja lukemisen sekä toimintakäytäntöjen yhteisessä alueessa. Avainsanat: sosiaalityö, lastensuojelu, dokumentointi, asiakirja, diskurssianalyysi, tiedonmuodostus.