Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.

The influence of eutrophication on sexual selection in sticklebacks

Jordens ekologiska system undergår för tillfället stora förändringar pga. människans aktiviteter. Ett växande antal studier visar att dessa förändringar påverkar naturliga och sexuella urvalet och därmed evolutiva processer. Målet med detta arbete var att undersöka effekterna av omgivningsförändringar på sexuella urvalet genom att använda den ökade övergödningen inom storpiggen Gasterosteus aculeatus lekområden som modell system. Sexuella urvalet är en viktig evolutiv kraft med följder på populations- och artnivå (Kapitel 1). Avhandlingens olika delar fokuserar på övergödningens effekter på upptäckandet av partners, användningen av visuella- och doftsignaler i partnersval, och fördelningen av parningsframgången mellan bobyggande hanar. I Kapitel II och III simuleras hur grumlighet orsakad av fytoplankton påverkar hastigheten med vilken potentiella partners påträffas, genom effekter på synligheten. Resultaten visar att normala algblomningar i Östersjön har en måttlig effekt på finnandet av potentiella partners. Detta tyder på att algblomningarna troligen inte kommer att minska på selektiva parningen pga. ökade sökkostnader. I Kapitel IV visas att storspiggen ändrar relativa användningen av olika signaler när vattnets grumlighet ökar; visuella signaler minskar i betydelse medan doftsignaler ökar i betydelse. Samtidigt underlättas användandet av doftsignaler av ändringar i vattnets kemiska sammansättning då fotosyntesen intensifieras (Kapitel V). Lek i övergödda vatten kan ändå vara kostsamt både på individ- och populationsnivån, då parasiterade hanar, som troligen är dåligt genetiskt anpassade till sin miljö, lyckas få mer ägg i sina bon än friskare hanar som troligen är av högre genetisk kvalitet (Kapitel VI). Övergödningen påverkar således partnersval och konkurrensen om partners genom att påverka upptäckandet av potentiella partners, evalueringen av partners och fördelningen av partners inom lekområdena. De följder detta kan ha för evolutionen av sexuellt selekterad egenskaper och för populationers dynamik och livskraft är dock oklara. Avhandlingen visar på svårigheten att förutse följderna av omgivningsförändringar för sexuella urvalet och effekterna på individ och populationsnivå.

Studies on the Cell Wall Structure and on the Mechanical Properties of Norway Spruce

The structure and the mechanical properties of wood of Norway spruce (Picea abies [L.] Karst.) were studied using small samples from Finland and Sweden. X-ray diffraction (XRD) was used to determine the orientation of cellulose microfibrils (microfibril angle, MFA), the dimensions of cellulose crystallites and the average shape of the cell cross-section. X-ray attenuation and x-ray fluorescence measurements were used to study the chemical composition and the trace element content. Tensile testing with in situ XRD was used to characterise the mechanical properties of wood and the deformation of crystalline cellulose within the wood cell walls. Cellulose crystallites were found to be 192 284 Å long and 28.9 33.4 Å wide in chemically untreated wood and they were longer and wider in mature wood than in juvenile wood. The MFA distribution of individual Norway spruce tracheids and larger samples was asymmetric. In individual cell walls, the mean MFA was 19 30 degrees, while the mode of the MFA distribution was 7 21 degrees. Both the mean MFA and the mode of the MFA distribution decreased as a function of the annual ring. Tangential cell walls exhibited smaller mean MFA and mode of the MFA distribution than radial cell walls. Maceration of wood material caused narrowing of the MFA distribution and removed contributions observed at around 90 degrees. In wood of both untreated and fertilised trees, the average shape of the cell cross-section changed from circular via ambiguous to rectangular as the cambial age increased. The average shape of the cell cross-section and the MFA distribution did not change as a result of fertilisation. The mass absorption coefficient for x-rays was higher in wood of fertilised trees than in that of untreated trees and wood of fertilised trees contained more of the elements S, Cl, and K, but a smaller amount of Mn. Cellulose crystallites were longer in wood of fertilised trees than in that of untreated trees. Kraft cooking caused widening and shortening of the cellulose crystallites. Tensile tests parallel to the cells showed that if the mean MFA is initially around 10 degrees or smaller, no systematic changes occur in the MFA distribution due to strain. The role of mean MFA in defining the tensile strength or the modulus of elasticity of wood was not as dominant as that reported earlier. Crystalline cellulose elongated much less than the entire samples. The Poisson ratio νca of crystalline cellulose in Norway spruce wood was shown to be largely dependent on the surroundings of crystalline cellulose in the cell wall, varying between -1.2 and 0.8. The Poisson ratio was negative in kraft cooked wood and positive in chemically untreated wood. In chemically untreated wood, νca was larger in mature wood and in latewood compared to juvenile wood and earlywood.

Characterisation of cellulose- and lignin-based materials using x-ray scattering methods

Wood is an important material for the construction and pulping industries. Using x-ray diffraction the microfibril angle of Sitka spruce wood was studied in the first part of this thesis. Sitka spruce (Picea sitchensis [Bong.] Carr.) is native to the west coast of North America, but due to its fast growth rate, it has also been imported to Europe. So far, its nanometre scale properties have not been systematically characterised. In this thesis the microfibril angle of Sitka spruce was shown to depend significantly on the origin of the tree in the first annual rings near the pith. Wood can be further processed to separate lignin from cellulose and hemicelluloses. Solid cellulose can act as a reducer for metal ions and it is also a porous support for nanoparticles. By chemically reducing nickel or copper in the solid cellulose support it is possible to get small nanoparticles on the surfaces of the cellulose fibres. Cellulose supported metal nanoparticles can potentially be used as environmentally friendly catalysts in organic chemistry reactions. In this thesis the size of the nickel and copper containing nanoparticles were studied using anomalous small-angle x-ray scattering and wide-angle x-ray scattering. The anomalous small-angle x-ray scattering experiments showed that the crystallite size of the copper oxide nanoparticles was the same as the size of the nanoparticles, so the nanoparticles were single crystals. The nickel containing nanoparticles were amorphous, but crystallised upon heating. The size of the nanoparticles was observed to be smaller when the reduction of nickel was done in aqueous ammonium hydrate medium compared to reduction made in aqueous solution. Lignin is typically seen as the side-product of wood industries. Lignin is the second most abundant natural polymer on Earth, and it possesses potential to be a useful material for many purposes in addition to being an energy source for the pulp mills. In this thesis, the morphology of several lignins, which were produced by different separation methods from wood, was studied using small-angle and ultra small-angle x-ray scattering. It was shown that the fractal model previously proposed for the lignin structure does not apply to most of the extracted lignin types. The only lignin to which the fractal model could be applied was kraft lignin. In aqueous solutions the average shape of the low molar mass kraft lignin particles was observed to be elongated and flat. The average shape does not necessarily correspond to the shape of the individual particles because of the polydispersity of the fraction and due to selfassociation of the particles. Lignins, and especially lignosulfonate, have many uses as dispersants, binders and emulsion stabilisers. In this thesis work the selfassociation of low molar mass lignosulfonate macromolecules was observed using small-angle x-ray scattering. By taking into account the polydispersity of the studied lignosulfonate fraction, the shape of the lignosulfonate particles was determined to be flat by fitting an oblate ellipsoidal model to the scattering intensity.

Good Lives, Hidden Miseries : An Ethnography of Uncertainty in a Finnish Village

This is an ethnographic study, in the field of medical anthropology, of village life among farmers in southwest Finland. It is based on 12 months of field work conducted 2002-2003 in a coastal village. The study discusses how social and cultural change affects the life of farmers, how they experience it and how they act in order to deal with the it. Using social suffering as a methodological approach the study seeks to investigate how change is related to lived experiences, idioms of distress, and narratives. Its aim has been to draw a locally specific picture of what matters are at stake in the local moral world that these farmers inhabit, and how they emerge as creative actors within it. A central assumption made about change is that it is two-fold; both a constructive force which gives birth to something new, and also a process that brings about uncertainty regarding the future. Uncertainty is understood as an existential condition of human life that demands a response, both causing suffering and transforming it. The possibility for positive outcomes in the future enables one to understand this small suffering of everyday life both as a consequence of social change, which fragments and destroys, and as an answer to it - as something that is positively meaningful. Suffering is seen to engage individuals to ensure continuity, in spite of the odds, and to sustain hope regarding the future. When the fieldwork was initiated Finland had been a member of the European Union for seven years and farmers felt it had substantially impacted on their working conditions. They complained about the restrictions placed on their autonomy and that their knowledge was neither recognised, nor respected by the bureaucrats of the EU system. New regulations require them to work in a manner that is morally unacceptable to them and financial insecurity has become more prominent. All these changes indicate the potential loss of the home and of the ability to ensure continuity of the family farm. Although the study initially focused on getting a general picture of working conditions and the nature of farming life, during the course of the fieldwork there was repeated mention of a perceived high prevalence of cancer in the area. This cancer talk is replete with metaphors that reveal cultural meanings tied to the farming life and the core values of autonomy, endurance and permanence. It also forms the basis of a shared identity and a means of delivering a moral message about the fragmentation of the good life; the loss of control; and the invasion of the foreign. This thesis formed part of the research project Expressions of Suffering. Ethnographies of Illness Experiences in Contemporary Finnish Contexts funded by the Academy of Finland. It opens up a vital perspective on the multiplicity and variety of the experience of suffering and that it is particularly through the use of the ethnographic method that these experiences can be brought to light. Keywords: suffering, uncertainty, phenomenology, habitus, agency, cancer, farming

Samarbete genom lagstiftning. Samarbetsförfarandets organisation, procedur och innehåll

Samarbetslagen är en omstridd lag. Innan lagen trädde i kraft i början av år 1979 fanns på arbetstagarsidan förhoppningar om att skapa en lag om reell företagsdemokrati medan man från arbetsgivarhåll var rädd att personalen skulle få ett alltför stort inflytande på beslutsfattandet. En oro fanns också att medbestämmandet skulle byråkratisera beslutsfattandet inom företagen. I dag anser många arbetstagare att samarbetsförfarandet endast används vid massuppsägningar, nedskärningar och rationaliseringar men i övrigt glömts bort. Samarbetsförfarandet och regleringen av det är en viktig och aktuell fråga, eftersom samarbetsförfarandet utgör det forum i samarbetet mellan arbetsgivare och personal där nedskärningar och massuppsägningar diskuteras. Avhandlingens syfte är att analysera hur samarbetsförfarandet fungerar utifrån samarbetslagen. Målet är att granska samarbetsförfarandet ur ett perspektiv där samarbetsförfarandet ses som en potentiell möjlighet och ett verktyg till framgångsrik företagsverksamhet och personalledarskap. I analysen utgår författaren från samarbetslagens 1 §. Syftet med samarbetsförfarandet är att utveckla företagets verksamhet och arbetsförhållanden, att effektivera samarbetet mellan arbetsgivare och personal samt personalens interna samverkan. Samarbetsförfarandet skall utöka personalens möjligheter att påverka behandlingen av ärenden som gäller deras arbete och arbetsplats i enlighet med lagen. Enligt samarbetsförfarandet skall arbetsgivaren rådgöra med arbetstagarna och deras företrädare om de viktigaste ärendena som påverkar personalens ställning och arbetsförhållande innan besluten fattas. Avhandlingen granskar hur lagen tillämpas i dag och hur lagstiftningen kan utvecklas för att effektivera samarbetet i framtiden.

Optical Tweezers for Single Molecule Biology

Molecular machinery on the micro-scale, believed to be the fundamental building blocks of life, involve forces of 1-100 pN and movements of nanometers to micrometers. Micromechanical single-molecule experiments seek to understand the physics of nucleic acids, molecular motors, and other biological systems through direct measurement of forces and displacements. Optical tweezers are a popular choice among several complementary techniques for sensitive force-spectroscopy in the field of single molecule biology. The main objective of this thesis was to design and construct an optical tweezers instrument capable of investigating the physics of molecular motors and mechanisms of protein/nucleic-acid interactions on the single-molecule level. A double-trap optical tweezers instrument incorporating acousto-optic trap-steering, two independent detection channels, and a real-time digital controller was built. A numerical simulation and a theoretical study was performed to assess the signal-to-noise ratio in a constant-force molecular motor stepping experiment. Real-time feedback control of optical tweezers was explored in three studies. Position-clamping was implemented and compared to theoretical models using both proportional and predictive control. A force-clamp was implemented and tested with a DNA-tether in presence of the enzyme lambda exonuclease. The results of the study indicate that the presented models describing signal-to-noise ratio in constant-force experiments and feedback control experiments in optical tweezers agree well with experimental data. The effective trap stiffness can be increased by an order of magnitude using the presented position-clamping method. The force-clamp can be used for constant-force experiments, and the results from a proof-of-principle experiment, in which the enzyme lambda exonuclease converts double-stranded DNA to single-stranded DNA, agree with previous research. The main objective of the thesis was thus achieved. The developed instrument and presented results on feedback control serve as a stepping stone for future contributions to the growing field of single molecule biology.