The Reorganisation of Provincial Territories in Light of the Imperial Decision-Making Process : Later Roman Arabia and Tres Palaestinae as Case Studies

The dissertation examines Roman provincial administration and the phenomenon of territorial reorganisations of provinces during the Imperial period with special emphasis on the provinces of Arabia and Palaestina during the Later Roman period, i.e., from Diocletian (r. 284 305) to the accession of Phocas (602), in the light of imperial decision-making. Provinces were the basic unit of Roman rule, for centuries the only level of administration that existed between the emperor and the cities of the Empire. The significance of the territorial reorganisations that the provinces were subjected to during the Imperial period is thus of special interest. The approach to the phenomenon is threefold: firstly, attention is paid to the nature and constraints of the Roman system of provincial administration. Secondly, the phenomenon of territorial reorganisations is analysed on the macro-scale, and thirdly, a case study concerning the reorganisations of the provinces of Arabia and Palaestina is conducted. The study of the mechanisms of decision-making provides a foundation through which the collected data of all known major territorial reorganisations is interpreted. The data concerning reorganisations is also subjected to qualitative comparative analysis that provides a new perspective to the data in the form of statistical analysis that is sensitive to the complexities of individual cases. This analysis of imperial decision-making is based on a timeframe stretching from Augustus (r. 30 BC AD 14) to the accession of Phocas (602). The study identifies five distinct phases in the use of territorial reorganisations of the provinces. From Diocletian s reign there is a clear normative change that made territorial reorganisations a regular tool of administration for the decision-making elite for addressing a wide variety of qualitatively different concerns. From the beginning of the fifth century the use of territorial reorganisations rapidly diminishes. The two primary reasons for the decline in the use of reorganisations were the solidification of ecclesiastical power and interests connected to the extent of provinces, and the decline of the dioceses. The case study of Palaestina and Arabia identifies seven different territorial reorganisations from Diocletian to Phocas. Their existence not only testifies to wider imperial policies, but also shows sensitivity to local conditions and corresponds with the general picture of provincial reorganisations. The territorial reorganisations of the provinces reflect the proactive control of the Roman decision-making elite. The importance of reorganisations should be recognised more clearly as part of the normal imperial administration of the provinces and especially reflecting the functioning of dioceses.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Proektirovanie perevodčeskih slovarej special'noj leksiki

The methodology of designing normative terminological products has been described in several guides and international standards. However, this methodology is not always applicable to designing translation-oriented terminological products which differ greatly from normative ones in terms of volume, function, and primary target group. This dissertation has three main goals. The first is to revise and enrich the stock of concepts and terms required in the process of designing an LSP dictionary for translators. The second is to detect, classify, and describe the factors which determine the characteristics of an LSP dictionary for translators and affect the process of its compilation. The third goal is to provide recommendations on different aspects of dictionary design. The study is based on an analysis of dictionaries, dictionary reviews, literature on translation-oriented lexicography, material from several dictionary projects, and the results of questionnaires. Thorough analysis of the concept of a dictionary helped us to compile a list of designable characteristics of a dictionary. These characteristics include target group, function, links to other resources, data carrier, list of lemmata, information about the lemmata, composition of other parts of the dictionary, compression of the data, structure of the data, and access structure. The factors which determine the characteristics of a dictionary have been divided into those derived from the needs of the intended users and those reflecting the restrictions of the real world (e.g. characteristics of the data carrier and organizational factors) and attitudes (e.g. traditions and scientific paradigms). The designer of a dictionary is recommended to take the intended users' needs as the starting point and aim at finding the best compromise between the conflicting factors. When designing an LSP dictionary, much depends on the level of knowledge of the intended users about the domain in question as well as their general linguistic competence, LSP competence, and lexicographic competence. This dissertation discusses the needs of LSP translators and the role of the dictionary in the process of translation of an LSP text. It also emphasizes the importance of planning lexicographic products and activities, and addresses many practical aspects of dictionary design.

Effects of the digital subtitling software on the subtitling process : A survey among Finnish professional television subtitlers

Tutkielma käsittelee suomalaisten televisiotekstittäjien ammatillisuutta, käännösprosessia ja digitaalisten tekstitysohjelmien vaikutuksia tekstitysprosessiin ammattitekstittäjien näkökulmasta. Suomen television digitalisoituminen on aiheuttanut mullistuksia myös tekstitysalalla kun tekstitettävä kuvamateriaali on ryhdytty toimittamaan käännöstoimistoille ja tekstittäjille digitaalisena. Teoriaosuudessa käsitellään käännös- ja tekstitystutkimusta sekä koulutusta Suomessa, ammattitaitoa ja ammatillisuutta sekä kääntämisen apukeinoja. Tekstittäminen esitellään erikoistuneena kääntämisen muotona. On kuitenkin myös huomioitava, että kääntäminen on yksi vaihe tekstitysprosessissa. Teoriaosuus päättyy suomalaisten televisiotekstittäjien arjen ja työkentän nykytilanteen käsittelyyn – tekstittäjät työskentelevät monenlaisilla työehdoilla ja laadun kriteerit saatetaan joutua arvioimaan uudelleen. Empiirisen osan alussa esitetään, että suomalaisia televisiotekstittäjiä on haastateltu yllättävän vähän, ja Jääskeläisen ajatuksiin nojaten mainitaan, että tekstittämisen alalla on vielä paljon tutkimatta – etenkin suomalaisesta tekstitysprosessista löytyy tutkittavaa. Tutkimuskohde on ammatikseen televisioon tekstityksiä tekevät kääntäjät. Suomalaiselle tekstitykseen erikoistuneelle käännöstoimistolle työskenteleville tekstittäjille lähetettiin alkutalvesta 2008 kyselylomake, jolla kartoitettiin sekä monivalintakysymyksillä että avoimilla kysymyksillä heidän ammatillisuuttaan, työmenetelmiään, käännös- ja tekstitysprosessiaan, ammattiylpeyttään ja -identiteettiään, ajanhallintaansa, sekä heidän käyttämäänsä digitaalista tekstitysohjelmaa. Tutkimuksessa kävi ilmi, että lähes kolmanneksella vastaajista on ammatistaan neutraali tai jopa negatiivinen käsitys. Näitä tekstittäjiä yhdistää se seikka, että kaikilla on alle 5 vuotta kokemusta alalta. Valtaosa vastanneista on kuitenkin ylpeitä siitä, että toimivat suomen kielen ammattilaisina. Tekstitysprosessi oli lomakkeessa jaettu esikatseluvaiheeseen, käännösvaiheeseen, ajastamisvaiheeseen ja korjauskatseluvaiheeseen. Tekstittäjät pyydettiin mm. arvioimaan tekstitysprosessinsa kokonaiskestoa. Kestoissa ilmeni suuria eroavaisuuksia, joista ainakin osa korreloi kokemuksen kanssa. Runsas puolet vastaajista on hankkinut digitaalisen tekstitysohjelmiston käyttöönsä ja osa ajastaa edelleen käännöstoimistossa muun muassa ohjelmiston kalleuden vuoksi. Digitaalisen ohjelmiston myötä tekstitysprosessiin ja työkäytänteisiin on tullut muutoksia, kun videonauhureista ja televisioista on siirrytty pelkän tietokoneen käyttöön. On mahdollista tehdä etätyötä kaukomailta käsin, kääntää ja ajastaa lomittain tai tehdä esiajastus ja kääntää sitten. Digitaalinen tekniikka on siis mahdollistanut tekstitysprosessin muuttumisen ja vaihtoehtoiset työmenetelmät, mutta kaikista menetelmistä ei välttämättä ole tekstittäjälle hyötyä. Perinteinen tekstitysprosessi (esikatselu, repliikkijakojen merkitseminen käsikirjoitukseen, kääntäminen ja repliikkien laadinta, korjaukset ja tarkastuskatselu) vaikuttaa edelleen tehokkaimmalta. Vaikka työkäytänteet eroavat toisistaan, kokonaiskäsitys on se, että digitalisoitumisen alkukangertelujen jälkeen tekstittäjien työskentely on tehostunut.

Language change as an evolutionary process

In the thesis it is discussed in what ways concepts and methodology developed in evolutionary biology can be applied to the explanation and research of language change. The parallel nature of the mechanisms of biological evolution and language change is explored along with the history of the exchange of ideas between these two disciplines. Against this background computational methods developed in evolutionary biology are taken into consideration in terms of their applicability to the study of historical relationships between languages. Different phylogenetic methods are explained in common terminology, avoiding the technical language of statistics. The thesis is on one hand a synthesis of earlier scientific discussion, and on the other an attempt to map out the problems of earlier approaches in addition to finding new guidelines in the study of language change on their basis. Primarily literature about the connections between evolutionary biology and language change, along with research articles describing applications of phylogenetic methods into language change have been used as source material. The thesis starts out by describing the initial development of the disciplines of evolutionary biology and historical linguistics, a process which right from the beginning can be seen to have involved an exchange of ideas concerning the mechanisms of language change and biological evolution. The historical discussion lays the foundation for the handling of the generalised account of selection developed during the recent few decades. This account is aimed for creating a theoretical framework capable of explaining both biological evolution and cultural change as selection processes acting on self-replicating entities. This thesis focusses on the capacity of the generalised account of selection to describe language change as a process of this kind. In biology, the mechanisms of evolution are seen to form populations of genetically related organisms through time. One of the central questions explored in this thesis is whether selection theory makes it possible to picture languages are forming populations of a similar kind, and what a perspective like this can offer to the understanding of language in general. In historical linguistics, the comparative method and other, complementing methods have been traditionally used to study the development of languages from a common ancestral language. Computational, quantitative methods have not become widely used as part of the central methodology of historical linguistics. After the fading of a limited popularity enjoyed by the lexicostatistical method since the 1950s, only in the recent years have also the computational methods of phylogenetic inference used in evolutionary biology been applied to the study of early language history. In this thesis the possibilities offered by the traditional methodology of historical linguistics and the new phylogenetic methods are compared. The methods are approached through the ways in which they have been applied to the Indo-European languages, which is the most thoroughly investigated language family using both the traditional and the phylogenetic methods. The problems of these applications along with the optimal form of the linguistic data used in these methods are explored in the thesis. The mechanisms of biological evolution are seen in the thesis as parallel in a limited sense to the mechanisms of language change, however sufficiently so that the development of a generalised account of selection is deemed as possibly fruiful for understanding language change. These similarities are also seen to support the validity of using phylogenetic methods in the study of language history, although the use of linguistic data and the models of language change employed by these models are seen to await further development.

Space in Musical Semiosis : An Abductive Theory of the Musical Composition Process

Space in musical semiosis is a study of musical meaning, spatiality and composition. Earlier studies on musical composition have not adequately treated the problems of musical signification. Here, composition is considered an epitomic process of musical signification. Hence the core problems of composition theory are core problems of musical semiotics. The study employs a framework of naturalist pragmatism, based on C. S. Peirce’s philosophy. It operates on concepts such as subject, experience, mind and inquiry, and incorporates relevant ideas of Aristotle, Peirce and John Dewey into a synthetic view of esthetic, practic, and semiotic for the benefit of grasping musical signification process as a case of semiosis in general. Based on expert accounts, music is depicted as real, communicative, representational, useful, embodied and non-arbitrary. These describe how music and the musical composition process are mental processes. Peirce’s theories are combined with current morphological theories of cognition into a view of mind, in which space is central. This requires an analysis of space, and the acceptance of a relativist understanding of spatiality. This approach to signification suggests that mental processes are spatially embodied, by virtue of hard facts of the world, literal representations of objects, as well as primary and complex metaphors each sharing identities of spatial structures. Consequently, music and the musical composition process are spatially embodied. Composing music appears as a process of constructing metaphors—as a praxis of shaping and reshaping features of sound, representable from simple quality dimensions to complex domains. In principle, any conceptual space, metaphorical or literal, may set off and steer elaboration, depending on the practical bearings on the habits of feeling, thinking and action, induced in musical communication. In this sense, it is evident that music helps us to reorganize our habits of feeling, thinking, and action. These habits, in turn, constitute our existence. The combination of Peirce and morphological approaches to cognition serves well for understanding musical and general signification. It appears both possible and worthwhile to address a variety of issues central to musicological inquiry in the framework of naturalist pragmatism. The study may also contribute to the development of Peircean semiotics.

Changes in Beer Labels and their Meaning : A Holistic Approach to the Semiosic Process

The purpose of this study is to find a framework for a holistic approach to, and form a conceptual toolbox for, investigating changes in signs and in their interpretation. Charles S. Peirce s theory of signs in a communicative perspective is taken as a basis for the framework. The concern directing the study is the problem of a missing framework in analysing signs of visual artefacts from a holistic perspective as well as that of the missing conceptual tools. To discover the possibility of such a holistic approach to semiosic processes and to form a conceptual toolbox the following issues are discussed: i) how the many Objects with two aspects involved in Peirce s definition of sign-action, promote multiple semiosis arising from the same sign by the same Interpretant depending on the domination of the Objects; ii) in which way can the relation of the individual and society or group be made more apparent in the construction of the self since this construction is intertwined with the process of meaning-creation and interpretation; iii) how to account for the fundamental role of emotions in semiosis, and the relation of emotions with the often neglected topic of embodiment; iv) how to take into account the dynamic, mediating and processual nature of sign-action in analysing and understanding the changes in signs and in the interpretation of signs. An interdisciplinary approach is chosen for this dissertation. Concepts that developed within social psychology, developmental psychology, neurosciences and semiotics, are discussed. The common aspect of the approaches is that they in one way or another concentrate on mediation provided by signs in explaining human activity and cognition. The holistic approach and conceptual toolbox found are employed in a case study. This consists of an analysis of beer brands including a comparison of brands from two different cultures. It becomes clear that different theories and approaches have mutual affinities and do complement each other. In addition, the affinities in different disciplines somewhat provide credence to the various views. From the combined approach described, it becomes apparent that by the semiosic process, the emerging semiotic self intertwined with the Umwelt, including emotions, can be described. Seeing the interpretation and meaning-making through semiosis allows for the analysis of groups, taking into account the embodied and emotional component. It is concluded that emotions have a crucial role in all human activity, including so-called reflective thinking, and that emotions and embodiment should be consciously taken into account in analysing signs, the interpretation, and in changes of signs and interpretations from both the social and individual level. The analysis of the beer labels expresses well the intertwined nature of the relationship between signs, individual consumers and society. Many direct influences from society on the label design are found, and also some indirect attitude changes that become apparent from magazines, company reports, etc. In addition, the analysis brings up the issues of the unifying tendency of the visual artefacts of different cultures, but also demonstrates that the visual artefacts are able to hold the local signs and meanings, and sometimes are able to represent the local meanings although the signs have changed in the unifying process.

Lagöversättning som process och produkt : Revideringar och institutioner vid lagöversättning till svenska i Finland

The thesis studies the translation process for the laws of Finland as they are translated from Finnish into Swedish. The focus is on revision practices, norms and workplace procedures. The translation process studied covers three institutions and four revisions. In three separate studies the translation process is analyzed from the perspective of the translations, the institutions and the actors. The general theoretical framework is Descriptive Translation Studies. For the analysis of revisions made in versions of the Swedish translation of Finnish laws, a model is developed covering five grammatical categories (textual revisions, syntactic revisions, lexical revisions, morphological revisions and content revisions) and four norms (legal adequacy, correct translation, correct language and readability). A separate questionnaire-based study was carried out with translators and revisers at the three institutions. The results show that the number of revisions does not decrease during the translation process, and no division of labour can be seen at the different stages. This is somewhat surprising if the revision process is regarded as one of quality control. Instead, all revisers make revisions on every level of the text. Further, the revisions do not necessarily imply errors in the translations but are often the result of revisers following different norms for legal translation. The informal structure of the institutions and its impact on communication, visibility and workplace practices was studied from the perspective of organization theory. The results show weaknesses in the communicative situation, which affect the co-operation both between institutions and individuals. Individual attitudes towards norms and their relative authority also vary, in the sense that revisers largely prioritize legal adequacy whereas translators give linguistic norms a higher value. Further, multi-professional teamwork in the institutions studied shows a kind of teamwork based on individuals and institutions doing specific tasks with only little contact with others. This shows that the established definitions of teamwork, with people co-working in close contact with each other, cannot directly be applied to the workplace procedures in the translation process studied. Three new concepts are introduced: flerstegsrevidering (multi-stage revision), revideringskedja (revision chain) and normsyn (norm attitude). The study seeks to make a contribution to our knowledge of legal translation, translation processes, institutional translation, revision practices and translation norms for legal translation. Keywords: legal translation, translation of laws, institutional translation, revision, revision practices, norms, teamwork, organizational informal structure, translation process, translation sociology, multilingual.

Kilpailukykyvaltion koululainsäädännön rakentuminen : Suomen eduskunta ja 1990-luvun koulutuspoliittinen käänne

Finnish education policy, educational legislation and the entire education system changed significantly during the 1990s as part of a general restructuring of public administration. There has been a clear divergence from the former tradition of a system of regulation, founded on detailed legislation and the principle of equality. The new governance, which is based more on individual choice, efficiency and evaluation, emphasizes that the development of a high standard of education is a necessity in the light of global competition. This study explores the legislative process regarding education policy in the Finnish Parliament during the 1990s, and highlights in particular how the international discourse on education policies was restructured in the context of Finnish legislation. The research material consists of all the public parliamentary documents relating to education, including government proposals, minutes from the discussions in the chamber and archive material (final protocols, reports and statements) for the Committee for Education and Culture. The discourse on the process of drafting and passing education legislation is modelled on three interrelated policy technologies (market, management and performance), which are understood here as mechanisms connecting general political ideas to normative legislation. The changes in the regulation of education were part of a general public administration reform instigated during the mid 1980s. The research results will prove that during the left-right coalition cabinet of PM Harri Holkeri, new policy technologies affected the parliamentary discourse on education policy. This was particularly influenced by a change in the preconditions for the management of education that was created as a result of the numerous demands to deregulate and delegate decision-making authority to the local and school levels while rendering the whole education system more effective. At the turn of the decade, market-type mechanisms were more indirectly manifested in the forms of individuality and freedom of choice, which were reflected, for example, in proposals to “lower the hurdles” by separating general from vocational secondary education with a view to encouraging students to select courses from other educational establishments, in addition to relaxing the requirements for establishing private schools and abolishing a hundred-year-old strict national catchment-area system. Later, in the course of the 1990s, after the subjects, players, and methods of evaluation had been more precisely defined, evaluation based on performance would result in the active measurement of the attainment of set objectives. In the spring of 1991, from the outset of PM Esko Aho's right-centre coalition cabinet, the education budget suffered cutbacks as a result of a global recession and this influenced the legislative work of, and discourses in, parliament. Representatives of the parties in power regarded the recession solely as an external factor that was remote from the political arena. In their view, the education system should rise to the challenge by ensuring the efficient and innovative use of the resources available and by developing new forms of indicators for evaluating results. Representatives of the opposition opposed the cabinet’s standpoint as a result of the recession, criticized the measures taken by pointing out the harmful effect of constantly cutting the budget and argued that the government had made political capital out of the recession by using it as an opportunity to give more room to market, management and performance technologies within the Finnish education system. Criticism of the new education policy became even stronger during PM Paavo Lipponen's first “rainbow” coalition cabinet with critical views being expressed not only from the opposition but also from representatives within the government. Representatives from the left demanded legislative restrictions and the instigation of measures to relieve the presumed negative effects of market, management and performance in the name of educational equality. The new management by results steering method within the university sector and the introduction of commercial education services in compulsory education were fiercely criticized. The argument over “setting outer limits” including, for example, the demands for more detailed legislation and earmarked state subsidies was characteristic of Parliament’s legislative discourse in the latter part of the 1990s. Keywords: education policy, education legislation, Parliament of Finland

Exploring Problem Decomposition in Conceptual Design

Design embraces several disciplines dedicated to the production of artifacts and services. These disciplines are quite independent and only recently has psychological interest focused on them. Nowadays, the psychological theories of design, also called design cognition literature, describe the design process from the information processing viewpoint. These models co-exist with the normative standards of how designs should be crafted. In many places there are concrete discrepancies between these two in a way that resembles the differences between the actual and ideal decision-making. This study aimed to explore the possible difference related to problem decomposition. Decomposition is a standard component of human problem-solving models and is also included in the normative models of design. The idea of decomposition is to focus on a single aspect of the problem at a time. Despite its significance, the nature of decomposition in conceptual design is poorly understood and has only been preliminary investigated. This study addressed the status of decomposition in conceptual design of products using protocol analysis. Previous empirical investigations have argued that there are implicit and explicit decomposition, but have not provided a theoretical basis for these two. Therefore, the current research began by reviewing the problem solving and design literature and then composing a cognitive model of the solution search of conceptual design. The result is a synthetic view which describes recognition and decomposition as the basic schemata for conceptual design. A psychological experiment was conducted to explore decomposition. In the test, sixteen (N=16) senior students of mechanical engineering created concepts for two alternative tasks. The concurrent think-aloud method and protocol analysis were used to study decomposition. The results showed that despite the emphasis on decomposition in the formal education, only few designers (N=3) used decomposition explicitly and spontaneously in the presented tasks, although the designers in general applied a top-down control strategy. Instead, inferring from the use of structured strategies, the designers always relied on implicit decomposition. These results confirm the initial observations found in the literature, but they also suggest that decomposition should be investigated further. In the future, the benefits and possibilities of explicit decomposition should be considered along with the cognitive mechanisms behind decomposition. After that, the current results could be reinterpreted.

Idealähtöistä koulualgebraa : IDEAA-opetusmallin kehittäminen algebran opetukseen peruskoulun 7. luokalla

This research is based on the problems in secondary school algebra I have noticed in my own work as a teacher of mathematics. Algebra does not touch the pupil, it remains knowledge that is not used or tested. Furthermore the performance level in algebra is quite low. This study presents a model for 7th grade algebra instruction in order to make algebra more natural and useful to students. I refer to the instruction model as the Idea-based Algebra (IDEAA). The basic ideas of this IDEAA model are 1) to combine children's own informal mathematics with scientific mathematics ("math math") and 2) to structure algebra content as a "map of big ideas", not as a traditional sequence of powers, polynomials, equations, and word problems. This research project is a kind of design process or design research. As such, this project has three, intertwined goals: research, design and pedagogical practice. I also assume three roles. As a researcher, I want to learn about learning and school algebra, its problems and possibilities. As a designer, I use research in the intervention to develop a shared artefact, the instruction model. In addition, I want to improve the practice through intervention and research. A design research like this is quite challenging. Its goals and means are intertwined and change in the research process. Theory emerges from the inquiry; it is not given a priori. The aim to improve instruction is normative, as one should take into account what "good" means in school algebra. An important part of my study is to work out these paradigmatic questions. The result of the study is threefold. The main result is the instruction model designed in the study. The second result is the theory that is developed of the teaching, learning and algebra. The third result is knowledge of the design process. The instruction model (IDEAA) is connected to four main features of good algebra education: 1) the situationality of learning, 2) learning as knowledge building, in which natural language and intuitive thinking work as "intermediaries", 3) the emergence and diversity of algebra, and 4) the development of high performance skills at any stage of instruction.