Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

From Polymorph Screening to Dissolution Testing - Solid Phase Analysis during Pharmaceutical Development and Manufacturing

Solid materials can exist in different physical structures without a change in chemical composition. This phenomenon, known as polymorphism, has several implications on pharmaceutical development and manufacturing. Various solid forms of a drug can possess different physical and chemical properties, which may affect processing characteristics and stability, as well as the performance of a drug in the human body. Therefore, knowledge and control of the solid forms is fundamental to maintain safety and high quality of pharmaceuticals. During manufacture, harsh conditions can give rise to unexpected solid phase transformations and therefore change the behavior of the drug. Traditionally, pharmaceutical production has relied on time-consuming off-line analysis of production batches and finished products. This has led to poor understanding of processes and drug products. Therefore, new powerful methods that enable real time monitoring of pharmaceuticals during manufacturing processes are greatly needed. The aim of this thesis was to apply spectroscopic techniques to solid phase analysis within different stages of drug development and manufacturing, and thus, provide a molecular level insight into the behavior of active pharmaceutical ingredients (APIs) during processing. Applications to polymorph screening and different unit operations were developed and studied. A new approach to dissolution testing, which involves simultaneous measurement of drug concentration in the dissolution medium and in-situ solid phase analysis of the dissolving sample, was introduced and studied. Solid phase analysis was successfully performed during different stages, enabling a molecular level insight into the occurring phenomena. Near-infrared (NIR) spectroscopy was utilized in screening of polymorphs and processing-induced transformations (PITs). Polymorph screening was also studied with NIR and Raman spectroscopy in tandem. Quantitative solid phase analysis during fluidized bed drying was performed with in-line NIR and Raman spectroscopy and partial least squares (PLS) regression, and different dehydration mechanisms were studied using in-situ spectroscopy and partial least squares discriminant analysis (PLS-DA). In-situ solid phase analysis with Raman spectroscopy during dissolution testing enabled analysis of dissolution as a whole, and provided a scientific explanation for changes in the dissolution rate. It was concluded that the methods applied and studied provide better process understanding and knowledge of the drug products, and therefore, a way to achieve better quality.

Understanding solid-state transformations during dehydration: new insights using vibrational spectroscopy and multivariate modelling

Many active pharmaceutical ingredients (APIs) have both anhydrate and hydrate forms. Due to the different physicochemical properties of solid forms, the changes in solid-state may result in therapeutic, pharmaceutical, legal and commercial problems. In order to obtain good solid dosage form quality and performance, there is a constant need to understand and control these phase transitions during manufacturing and storage. Thus it is important to detect and also quantify the possible transitions between the different forms. In recent years, vibrational spectroscopy has become an increasingly popular tool to characterise the solid-state forms and their phase transitions. It offers several advantages over other characterisation techniques including an ability to obtain molecular level information, minimal sample preparation, and the possibility of monitoring changes non-destructively in-line. Dehydration is the phase transition of hydrates which is frequently encountered during the dosage form production and storage. The aim of the present thesis was to investigate the dehydration behaviour of diverse pharmaceutical hydrates by near infrared (NIR), Raman and terahertz pulsed spectroscopic (TPS) monitoring together with multivariate data analysis. The goal was to reveal new perspectives for investigation of the dehydration at the molecular level. Solid-state transformations were monitored during dehydration of diverse hydrates on hot-stage. The results obtained from qualitative experiments were used to develop a method and perform the quantification of the solid-state forms during process induced dehydration in a fluidised bed dryer. Both in situ and in-line process monitoring and quantification was performed. This thesis demonstrated the utility of vibrational spectroscopy techniques and multivariate modelling to monitor and investigate dehydration behaviour in situ and during fluidised bed drying. All three spectroscopic methods proved complementary in the study of dehydration. NIR spectroscopy models could quantify the solid-state forms in the binary system, but were unable to quantify all the forms in the quaternary system. Raman spectroscopy models on the other hand could quantify all four solid-state forms that appeared upon isothermal dehydration. The speed of spectroscopic methods makes them applicable for monitoring dehydration and the quantification of multiple forms was performed during phase transition. Thus the solid-state structure information at the molecular level was directly obtained. TPS detected the intermolecular phonon modes and Raman spectroscopy detected mostly the changes in intramolecular vibrations. Both techniques revealed information about the crystal structure changes. NIR spectroscopy, on the other hand was more sensitive to water content and hydrogen bonding environment of water molecules. This study provides a basis for real time process monitoring using vibrational spectroscopy during pharmaceutical manufacturing.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Governance Matters : China's Developing Western Region with a Focus on Qinghai Province

This study is about governance in contemporary China. The focus is on Qinghai Province, one of the twelve provincial-level units included in the western region development strategy launched in 2000 by the government of China. Qinghai, the subject of the case study, is not a very well-known province. Hence, this study is significant, because it provides new knowledge about the province of Qinghai, its governance and diverse challenges, and deepens one s overall knowledge regarding China. Qinghai province is one of the slowest developing regions of China. My research problem is to analyze to what extent provincial development correlates with the quality of governance. The central concept of this research is good governance. This dissertation employs a grounded theory approach while the theoretical framework of this study is built on the Three World s approach of analyzing the three main themes, namely, the environment, economic development, and cultural diversity, and to support the empirical work. Philosophical issues in the humanities and contemporary theories of governance are brought in to provide deeper understanding of governance, and to understand to what extent and how characteristics of good governance (derived from the Western canon) are combined with Chinese tradition. A qualitative research method is chosen to provide a deeper understanding of the contemporary challenges of Qinghai (and China) and to provide some insight into the role and impact of governance on provincial development. It also focuses on the Tibetan ethnic group in order to develop as full an understanding as possible about the province. The challenges faced by Qinghai concern in particular its environment, economic development, and cultural diversity, all of which are closely interrelated. The findings demonstrate that Qinghai Province is not a powerful actor, because it has weak communications with the central government and weak collaboration with its stakeholders and civil society. How Qinghai s provincial government conducts provincial development remains a key question in terms of shaping the province s future. The question is how is Qinghai s government best able to govern in a way that is beneficial for the people. This study demonstrates that this is a significant question that challenges governance everywhere, and particularly in China given the absence of democracy. This study provides the ingredients for reflection as to how provincial government can be motivated to choose to govern in a sustainable way, instead of leaning on growth factors with too little consideration about the impact on the environment and the people.

Between Herbals et alia: Intertextuality in Medieval English Herbals

This study reports a corpus-based study of medieval English herbals, which are texts conveying information on medicinal plants. Herbals belong to the medieval medical register. The study charts intertextual parallels within the medieval genre, and between herbals and other contemporary medical texts. It seeks to answer questions where and how herbal texts are linked to each other, and to other medical writing. The theoretical framework of the study draws on intertextuality and genre studies, manuscript studies, corpus linguistics, and multi-dimensional text analysis. The method combines qualitative and quantitative analyses of textual material from three historical special-language corpora of Middle and Early Modern English, one of which was compiled for the purposes of this study. The text material contains over 800,000 words of medical texts. The time span of the material is from c. 1330 to 1550. Text material is retrieved from the corpora by using plant name lists as search criteria. The raw data is filtered through qualitative analysis which produces input for the quantitative analysis, multi-dimensional scaling (MDS). In MDS, the textual space that parallel text passages form is observed, and the observations are explained by a qualitative analysis. This study concentrates on evidence of material and structural intertextuality. The analysis shows patterns of affinity between the texts of the herbal genre, and between herbals and other texts in the medical register. Herbals are most closely linked with recipe collections and regimens of health: they comprise over 95 per cent of the intertextual links between herbals and other medical writing. Links to surgical texts, or to specialised medical texts are very few. This can be explained by the history of the herbal genre: as herbals carry information on medical ingredients, herbs, they are relevant for genres that are related to pharmacological therapy. Conversely, herbals draw material from recipe collections in order to illustrate the medicinal properties of the herbs they describe. The study points out the close relationship between medical recipes and recipe-like passages in herbals (recipe paraphrases). The examples of recipe paraphrases show that they may have been perceived as indirect instruction. Keywords: medieval herbals, early English medicine, corpus linguistics, intertextuality, manuscript studies

Oxidative stability of phytosterols in food models and foods

An important safety aspect to be considered when foods are enriched with phytosterols and phytostanols is the oxidative stability of these lipid compounds, i.e. their resistance to oxidation and thus to the formation of oxidation products. This study concentrated on producing scientific data to support this safety evaluation process. In the absence of an official method for analyzing of phytosterol/stanol oxidation products, we first developed a new gas chromatographic - mass spectrometric (GC-MS) method. We then investigated factors affecting these compounds' oxidative stability in lipid-based food models in order to identify critical conditions under which significant oxidation reactions may occur. Finally, the oxidative stability of phytosterols and stanols in enriched foods during processing and storage was evaluated. Enriched foods covered a range of commercially available phytosterol/stanol ingredients, different heat treatments during food processing, and different multiphase food structures. The GC-MS method was a powerful tool for measuring the oxidative stability. Data obtained in food model studies revealed that the critical factors for the formation and distribution of the main secondary oxidation products were sterol structure, reaction temperature, reaction time, and lipid matrix composition. Under all conditions studied, phytostanols as saturated compounds were more stable than unsaturated phytosterols. In addition, esterification made phytosterols more reactive than free sterols at low temperatures, while at high temperatures the situation was the reverse. Generally, oxidation reactions were more significant at temperatures above 100°C. At lower temperatures, the significance of these reactions increased with increasing reaction time. The effect of lipid matrix composition was dependent on temperature; at temperatures above 140°C, phytosterols were more stable in an unsaturated lipid matrix, whereas below 140°C they were more stable in a saturated lipid matrix. At 140°C, phytosterols oxidized at the same rate in both matrices. Regardless of temperature, phytostanols oxidized more in an unsaturated lipid matrix. Generally, the distribution of oxidation products seemed to be associated with the phase of overall oxidation. 7-ketophytosterols accumulated when oxidation had not yet reached the dynamic state. Once this state was attained, the major products were 5,6-epoxyphytosterols and 7-hydroxyphytosterols. The changes observed in phytostanol oxidation products were not as informative since all stanol oxides quantified represented hydroxyl compounds. The formation of these secondary oxidation products did not account for all of the phytosterol/stanol losses observed during the heating experiments, indicating the presence of dimeric, oligomeric or other oxidation products, especially when free phytosterols and stanols were heated at high temperatures. Commercially available phytosterol/stanol ingredients were stable during such food processes as spray-drying and ultra high temperature (UHT)-type heating and subsequent long-term storage. Pan-frying, however, induced phytosterol oxidation and was classified as a rather deteriorative process. Overall, the findings indicated that although phytosterols and stanols are stable in normal food processing conditions, attention should be paid to their use in frying. Complex interactions between other food constituents also suggested that when new phytosterol-enriched foods are developed their oxidative stability must first be established. The results presented here will assist in choosing safe conditions for phytosterol/stanol enrichment.

Rwanda Crisis and Genocide in Case Law of Rwanda Tribunal

After the Second World War the public was shocked to learn about the horrors perpetrated. As a response to the Holocaust, the newly established United Nations adopted the Genocide Convention of 1948 to prevent future genocides and to punish the perpetrators. The Convention remained, however, almost dead letter until the present day. In 1994, the long-lasted tension between the major groups of Hutu and Tutsi in Rwanda erupted in mass scale violence towards the Tutsi ethnic group. The purpose was to eradicate the Tutsi population of Rwanda. The international community did not halt the genocide. It stood by idle, failing to follow the swearing-in of the past. The United Nations established the International Criminal Tribunal for Rwanda (the ICTR) to bring to justice persons responsible for the genocide. Ever since its creation the ICTR has delivered a wealth of judgements elucidating the legal ingredients of the crime of genocide. The case law on determining the membership of national, ethnic, racial or religious groups has gradually shifted from the objective to subjective position. The membership of a group is seen as a subjective rather than objective concept. However, a totally subjective approach is not accepted. Therefore, it is necessary to determine some objective existence of a group. The provision on the underlying offences is not so difficult to interpret compared to the corresponding one on the protected groups and the mental element of genocide. The case law examined, e.g., whether there is any difference between the words killing and meurtre, the nature of mental harm caused by the perpetrator and sexual violence in the conflict. The mental element of genocide or dolus specialis of genocide is not thoroughly examined in the case law of the ICTR. In this regard, reference in made, in addition, to the case law of the other ad hoc Tribunal. The ICTR has made a significant contribution to the law of genocide and international criminal justice in general. The corpus of procedural and substantive law constitutes a basis for subsequent trials in international and hybrid tribunals. For national jurisdictions the jurisprudence on substantive law is useful while prosecuting international crimes.

Toiminta, valta ja kokemus organisaation muutoksessa : Tutkimus kolmesta suuryrityksestä

Action, Power and Experience in Organizational Change - A Study of Three Major Corporations This study explores change management and resistance to change as social activities and power displays through worker experiences in three major Finnish corporations. Two important sensitizing concepts were applied. Firstly, Richard Sennett's perspective on work in the new form of capitalism, and its shortcomings - the lack of commitment and freedom accompanied by the disruption to lifelong career planning and the feeling of job insecurity - offered a fruitful starting point for a critical study. Secondly, Michel Foucault's classical concept of power, treated as anecdotal, interactive and nonmeasurable, provided tools for analyzing change-enabling and resisting acts. The study bridges the gap between management and social sciences. The former have usually concentrated on leadership issues, best practices and goal attainment, while the latter have covered worker experiences, power relations and political conflicts. The study was motivated by three research questions. Firstly, why people resist or support changes in their work, work environment or organization, and the kind of analyses these behavioural choices are based on. Secondly, the kind of practical forms which support for, and resistance to change take, and how people choose the different ways of acting. Thirdly, how the people involved experience and describe their own subject position and actions in changing environments. The examination focuses on practical interpretations and action descriptions given by the members of three major Finnish business organizations. The empirical data was collected during a two-year period in the Finnish Post Corporation, the Finnish branch of Vattenfal Group, one of the leading European energy companies, and the Mehiläinen Group, the leading private medical service provider in Finland. It includes 154 non-structured thematic interviews and 309 biographies concentrating on personal experiences of change. All positions and organizational levels were represented. The analysis was conducted using the grounded theory method introduced by Straus and Corbin in three sequential phases, including open, axial and selective coding processes. As a result, there is a hierarchical structure of categories, which is summarized in the process model of change behaviour patterns. Key ingredients are past experiences and future expectations which lead to different change relations and behavioural roles. Ultimately, they contribute to strategic and tactical choices realized as both public and hidden forms of action. The same forms of action can be used in both supporting and resisting change, and there are no specific dividing lines either between employer and employee roles or between different hierarchical positions. In general, however, it is possible to conclude that strategic choices lead more often to public forms of action, whereas tactical choices result in hidden forms. The primary goal of the study was to provide knowledge which has practical applications in everyday business life, HR and change management. The results, therefore, are highly applicable to other organizations as well as to less change-dominated situations, whenever power relations and conflicting interests are present. A sociological thesis on classical business management issues can be of considerable value in revealing the crucial social processes behind behavioural patterns. Keywords: change management, organizational development, organizational resistance, resistance to change, change management, labor relations, organization, leadership

Stor Anna, Liten Anna och tio andra personporträtt : Om innehållsliga och språkliga mönster i en mediegenres kvinnobeskrivningar

The aim of this licentiate thesis is to analyse how femininity is constructed in twelve portrait interviews of women in the dailies Dagens Nyheter (Stockholm) and Hufvudstadsbladet (Helsinki) in September 1996, and to explore the portrait interview as a media genre. The qualitative analysis has a feminist and constructionist perspective and is connected to critical text analysis. It was carried out on two levels: first, femininity is identified on the linguistic level by choice of words, and second on the level of content (topical motifs/themes). The portrait interview as a genre constitutes a third dimension in the analysis: The aim is not towards the identification of femininity, but rather towards the identification of the portrait interview a relatively unexplored media genre. References (Swedish: omtal) to the principal character (or protagonist) are traced mainly through reference chains which consist of names, pronouns and substantive phrases. The interviewees were referred to by their full names in Dagens Nyheter (with the exception of the oldest and youngest interviewees, both of whom were mainly referred to by their first names), while the style of reference varied more in Hufvudstadsbladet. The position of the principal character was also analysed through her relation in the text to minor characters from her working life and from her private life. These minor characters maintained their subordinate positions in all of the portraits except that of the youngest principal character, in which the subsidiary voices became at least as strong as the voice of the principal character. Three frequently-recurring topical motifs occurred in the portraits: The first involved explanations for the principal character s success divided into three categories, agent, affect and ambition, the second concerned using journeys or trips as symbols for turning points in life, and the third referred to the ambiguity in the contradiction between private (family/other private life) and public (work) life. This ambiguity is connected to the portrait interview as a text type (genre) which features conclusions at the end of portraits, which in turn is characteristic of reportage. However, the analysis showed that the conclusions of the portrait interviews often also included elements of ambiguity. This was evident in the contradictions be14 tween private and public life that arose in the portrait interviews that focused on these two spheres. The portraits that focused on the principal character s public life showed ambiguity on a more general level concerning questions about being a woman and having a profession, and they often ended with a description of some details of her private life. The women in the portraits were all constructed as being successful, in terms of having achieved direct success, reflective success or success in the form of life wisdom. The women of direct success were described as ambitious individuals with no sidetracks on their life paths, while those of reflective success were described as active heroines who had received help from different agents, who could use their affects as enriching ingredients in life, but who in the end had control over their own lives (life stories). The elderly women were constructed as having achieved life wisdom and their portraits were focused upon the past. The portrait interview as a genre is characterised by journalistic freedom (in relation to the more strict news genre), by a now room (Swedish nurum ) where the journalist meets the principal character (usually via spoken dialogue that she or he transforms into written text to be read by a mass-media audience) and by the relatively closed structure of the portrait. The portrait is relatively independent in relation to the news genre and in relation to the context of what has previously been written, what is being written at the time and what will be written in the future the principal character does not need to belong to the newspaper s usual gallery of actors. Furthermore, the principal character is constructed as being independent in relation to the subsidiary characters and other media actors. The conflict is within the principal character herself and within her life story, unlike the news genre in which equal actors are in conflict with each other. The portrait is also independent in relation to the news lifespan; the publishing timetable is not as strict as in the news genre, but is still dependent on the factors initiating the portrait. The enclosures consist of a raw analysis of two of twelve portrait interviews and of copies of all portraits.

Polymeereillä stabiloitu amorfinen formulaatio

Nowadays growing number of new active pharmaceutical ingredients (API) have large molecular weight and are hydrophobic. The energy of their crystal lattice is bigger and polarity has decreased. This leads to weakened solubility and dissolution rate of the drug. These properties can be enhanced for example by amorphization. Amorphous form has the best dissolution rate in the solid state. In the amorphous form drug molecules are randomly arranged, so the energy required to dissolve molecules is lower compared to the crystalline counterpart. The disadvantage of amorphous form is that it is unstable. Amorphous form tends to crystallize. Stability of amorphous form can be enhanced by adding an adjuvant to drug product. Adjuvant is usually a polymer. Polymers prevent crystallization both by forming bonds with API molecules and by steric hindrance. The key thing in stabilizing amorphous form is good miscibility between API and polymer. They have to be mixed in a molecular level so that the polymer is able to prevent crystallization. The aim of this work was to study miscibility of drug and polymer and stability of their dispersion with different analytical methods. Amorphous dispersions were made by rotary evaporator and freeze dryer. Amorphicity was confirmed with X-ray powder diffraction (XRPD) right after preparation. Itraconazole and theophylline were the chosen molecules to be stabilized. Itraconazole was expected to be easier and theophylline more difficult to stabilize. Itraconazole was stabilized with HPMC and theophylline was stabilized with PVP. Miscibility was studied with XRPD and differential scanning calorimetry (DSC). In addition it was studied with polarized light microscope if miscibility was possible to see visually. Dispersions were kept in stressed conditions and the crystallization was analyzed with XRPD. Stability was also examined with isothermal microcalorimetry (IMC). The dispersion of itraconazole and theophylline 40/60 (w/w) was completely miscible. It was proved by linear combination of XRPD results and single glass transition temperature in DSC. Homogenic well mixed film was observed with light microscope. Phase separation was observed with other compositions. Dispersions of theophylline and PVP mixed only partly. Stability of itraconazole dispersions were better than theophylline dispersions which were mixed poorer. So miscibility was important thing considering stability. The results from isothermal microcalorimetry were similar to results from conventional stability studies. Complementary analytical methods should be used when studying miscibility so that the results are more reliable. Light microscope is one method in addition to mostly used XRPD and DSC. Analyzing light microscope photos is quite subjective but it gives an idea of miscibility. Isothermal microcalorimetry can be one option for conventional stability studies. If right conditions can be made where the crystallization is not too fast, it may be possible to predict stability with isothermal microcalorimetry.

Elämän ja entisyyden maisemat : Kolgujev nenetsien arjessa, muistelussa ja kerronnassa

The dissertation discusses the conceptions of place and landscape amongst Nenets living on the island of Kolguyev or being of Kolguyev descent. The conceptions are examined through the everyday life of the community, oral recollections and narration that unfold meanings related to the island. The research material has been collected in ethnographic fieldwork in 2000 2005. The duration of individual fieldworks varies from two weeks to three months and their total duration is nearly six months. The fieldwork has been conducted both on the island and in the city of Nar yan-Mar. The main methods have been participant observation and recorded and unrecorded informal interviews. In addition to the field work data, archive materials, travel accounts, and other historical texts by outsiders about Kolguyev or the Nenets living in the European side of Russia have been used as a research material. The analysis is based on the idea of the place as a meeting point of the physical features, experiences in them and collective narration about them. The concept sense of place is used to describe the interaction of these three. Lived space manifests individual s or collective sense of place. The places form different kinds of networks of meanings which are called landscapes. Hot spots are places where different meanings accumulate. Furthermore, the material is analysed using the concepts of Tale World and Story Realm by Katherine Young. The Tale World is a realm created during the Story Realm, i.e. the event of narrations. The Tale Worlds are true as such but become evaluated in the Story Realm. The Tale Worlds are seen to arise both from the physical features of a place and from oral tradition, but at the same time these worlds give meanings to the place. The Tale Worlds are one of the central ingredients for the sense of place. One of the most central hot spots in Kolguyev is the arok harbour, where most of the themes of the pre-Soviet Tale Worlds are placed: trade and interaction with the Russians, rituals of the popular religion and arrival of the first Nenets to the island. arok is also part of the landscape of the coast where the meetings of Nenets and the other(s) are generally connected. Furthermore, arok is connected to the network of amans graves but also more generally to the landscape of collective sacred and sacrificial places. Another hot spot is the population centre of Bugrino which unfolds through the evaluations of the Tale Worlds. It also is the centre of the everyday life of the community studied. The Tale Worlds of the radiant past fastens on the population centre which is described through the negative models within the genre of litany. Sacred places, that represent the possibility to meet the Otherworld or mark places were encounters with the Otherworld have taken place, generate many kinds of landscapes in the island. They fasten on the graves of the amans, sirtya tradition, and to collective sacred places with their associations. The networks are not closed systems but are given meanings and new associations continuously in narration and recollection. They form multi-level and significant landscapes which reflect the fastening of the Kolguyev Nenets in the tundra of the island. In the research material the holy places and the popular religiousness are emphasised which is one of the most significant research results. It can be seen to reflect collective resistance and the questioning of the atheistic propaganda of the Soviet years. The narration and the recollection often refer also to the discourse of the anti-religious propaganda or use its strategies. The centrality of the holy places is also based on the tenacity of the religious Tale Worlds and sense of place and to the collective significance of the religion in general.