Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

Teknillisen korkeakoulun konetekniikan osaston opettajien ja opiskelijoiden kokemukset oppimisen arvioinnista ja palautteesta

Objectives. The purpose of this study was to examine perceptions of evaluation of learning and feedback among teachers and students of mechanical engineering at the Helsinki University of Technology. The differences and similarities between the perceptions of these two groups were also studied. Course feedback was examined, and a target was set to rationalize the collation and exploitation of the feedback data. The theoretical background for the evaluation of learning was based primarily on the theories of Brown (1997), Karjalainen (2001) and Rowntree (1977, 1988). The Biggs (2003) model on aligned teaching was used as an example of quality university education. Feedback practices were examined through the theory of Ramsden (1992) and many recent research articles. Methods. The qualitative study was executed by examining the evaluation of learning and feedback prac-tices of the courses in mechanical engineering at the Helsinki University of Technology. The data was gathered by interviewing the teachers responsible of basic and postgraduate studies, as well as students taking their basic studies. Four group interviews were arranged for both teachers and students, each with three participants. The data from these themed interviews were analyzed by means of content analysis. Result and conclusions. This study showed that teachers and students have similar perceptions of evalua-tion of learning and feedback excluding a few significant differences. The most essential difference in evaluation of learning was that students perceived the evaluation of the examinations to be inaccurate. Teachers on the other hand thought that the existing practice for the exam evaluation is working fine. Stu-dents also felt that they are not giving enough information on the opportunities to get feedback. Teachers instead expected students to actively ask for feedback. Students perceived the need for exploiting the course feedback for course development purposes more than before. Teachers saw foremost the challenges and problems in the exploitation of the feedback. In the future, more effort must be put on the research of the evaluation of learning and feedback, as the quality assurance and continuous improvement of the teaching calls for new data.

Yliopiston oppimis- ja opetuskäsitykset murroksessa : Teknillistieteellisen alan opettajien käsityksiä ja lähestymistapoja alan oppimiseen ja opetukseen

The starting point for this study was university teaching and teachers and specifically their changing role when confronting the Finnish University Reform and the student-focused theories of learning. Teachers’ pedagogical thinking and pedagogical content knowledge were also part of the theoretical framework. In the research of conceptions of and approaches to learning and teaching, the qualitative classifications of Säljö and Marton (1976; 1997), Ramsden (1992), Kember (1997) and Trigwell and Prosser (1999) were utilised. Two study questions were raised (1) What kind of conceptions of and approaches to learning do engineering science teachers have? and (2) What kind of conceptions of and approaches to teaching do engineering science teachers have? The relationship between teachers’ conceptions and teaching was also examined. The research material was collected in autumn 2008 by interviewing teachers and by observing teaching in the Department of Energy Technology at Helsinki University of Technology. Altogether two tutorials and ten lectures were observed. Each teacher of the observed lectures was interviewed once. The interviews were carried out as semi-structured theme interviews. In the analysis of the research material phenomenographical approach was adapted. The study revealed many kinds of conceptions of and approaches to learning and teaching in the teachers’ speech. On the basis of the research material, the conceptions and approaches that the teachers declare do not always reflect their actions in the teaching situation. The surface approaches to learning and teacher-focused approaches to teaching and conceptions of receiving and transmission of knowledge were parallel. Instead the teachers’ declarations of the deep approaches to learning and student-focused approaches to teaching were partly in conflict with how the teacher taught. When striving towards student-centered teaching culture attention should be paid to the development of teachers’ pedagogical thinking and pedagogical content knowledge. The culture and the structures of the educational institution should also be considered.

Representing the epistemic nature of teachers’ practical knowledge : The case of class teachers’ general pedagogy

The present study addressed the epistemology of teachers’ practical knowledge. Drawing from the literature, teachers’ practical knowledge is defined as all teachers’ cognitions (e.g., beliefs, values, motives, procedural knowing, and declarative knowledge) that guide their practice of teaching. The teachers’ reasoning that lies behind their practical knowledge is addressed to gain insight into its epistemic nature. I studied six class teachers’ practical knowledge; they teach in the metropolitan region of Helsinki. Relying on the assumptions of the phenomenographic inquiry, I collected and analyzed the data. I analyzed the data in two stages where the first stage involved an abductive procedure, and the second stage an inductive procedure for interpretation, and thus developed the system of categories. In the end, a quantitative analysis nested into the qualitative findings to study the patterns of the teachers’’ reasoning. The results indicated that teachers justified their practical knowledge based on morality and efficiency of action; efficiency of action was found to be presented in two different ways: authentic efficiency and naïve efficiency. The epistemic weight of morality was embedded in what I call “moral care”. The core intention of teachers in the moral care was the commitment that they felt about the “whole character” of students. From this perspective the “dignity” and the moral character of the students should not replaced for any other “instrumental price”. “Caring pedagogy” was the epistemic value of teachers’ reasoning in the authentic efficiency. The central idea in the caring pedagogy was teachers’ intentions to improve the “intellectual properties” of “all or most” of the students using “flexible” and “diverse” pedagogies. However, “regulating pedagogy” was the epistemic condition of practice in the cases corresponding to naïve efficiency. Teachers argued that an effective practical knowledge should regulate and manage the classroom activities, but the targets of the practical knowledge were mainly other “issues “or a certain percentage of the students. In these cases, the teachers’ arguments were mainly based on the notion of “what worked” regardless of reflecting on “what did not work”. Drawing from the theoretical background and the data, teachers’ practical knowledge calls for “praxial knowledge” when they used the epistemic conditions of “caring pedagogy” and “moral care”. It however calls for “practicable” epistemic status when teachers use the epistemic condition of regulating pedagogy. As such, praxial knowledge with the dimensions of caring pedagogy and moral care represents the “normative” perspective on teachers’ practical knowledge, and thus reflects a higher epistemic status in comparison to “practicable” knowledge, which represents a “descriptive” perception toward teachers’ practical knowledge and teaching.

Teacher Education, School Effectiveness and Improvement : A Study of Academic and Professional Qualification on Teachers' Job Effectiveness in Nigerian Secondary Schools

This academic work begins with a compact presentation of the general background to the study, which also includes an autobiography for the interest in this research. The presentation provides readers who know little of the topic of this research and of the structure of the educational system as well as of the value given to education in Nigeria. It further concentrates on the dynamic interplay of the effect of academic and professional qualification and teachers' job effectiveness in secondary schools in Nigeria in particular, and in Africa in general. The aim of this study is to produce a systematic analysis and rich theoretical and empirical description of teachers' teaching competencies. The theoretical part comprises a comprehensive literature review that focuses on research conducted in the areas of academic and professional qualification and teachers' job effectiveness, teaching competencies, and the role of teacher education with particular emphasis on school effectiveness and improvement. This research benefits greatly from the functionalist conception of education, which is built upon two emphases: the application of the scientific method to the objective social world, and the use of an analogy between the individual 'organism' and 'society'. To this end, it offers us an opportunity to define terms systematically and to view problems as always being interrelated with other components of society. The empirical part involves describing and interpreting what educational objectives can be achieved with the help of teachers' teaching competencies in close connection to educational planning, teacher training and development, and achieving them without waste. The data used in this study were collected between 2002 and 2003 from teachers, principals, supervisors of education from the Ministry of Education and Post Primary Schools Board in the Rivers State of Nigeria (N=300). The data were collected from interviews, documents, observation, and questionnaires and were analyzed using both qualitative and quantitative methods to strengthen the validity of the findings. The data collected were analyzed to answer the specific research questions and hypotheses posited in this study. The data analysis involved the use of multiple statistical procedures: Percentages Mean Point Value, T-test of Significance, One-Way Analysis of Variance (ANOVA), and Cross Tabulation. The results obtained from the data analysis show that teachers require professional knowledge and professional teaching skills, as well as a broad base of general knowledge (e.g., morality, service, cultural capital, institutional survey). Above all, in order to carry out instructional processes effectively, teachers should be both academically and professionally trained. This study revealed that teachers are not however expected to have an extraordinary memory, but rather looked upon as persons capable of thinking in the right direction. This study may provide a solution to the problem of teacher education and school effectiveness in Nigeria. For this reason, I offer this treatise to anyone seriously committed in improving schools in developing countries in general and in Nigeria in particular to improve the lives of all its citizens. In particular, I write this to encourage educational planners, education policy makers, curriculum developers, principals, teachers, and students of education interested in empirical information and methods to conceptualize the issue this study has raised and to provide them with useful suggestions to help them improve secondary schooling in Nigeria. Though, multiple audiences exist for any text. For this reason, I trust that the academic community will find this piece of work a useful addition to the existing literature on school effectiveness and school improvement. Through integrating concepts from a number of disciplines, I aim to describe as holistic a representation as space could allow of the components of school effectiveness and quality improvement. A new perspective on teachers' professional competencies, which not only take into consideration the unique characteristics of the variables used in this study, but also recommend their environmental and cultural derivation. In addition, researchers should focus their attention on the ways in which both professional and non-professional teachers construct and apply their methodological competencies, such as their grouping procedures and behaviors to the schooling of students. Keywords: Professional Training, Academic Training, Professionally Qualified, Academically Qualified, Professional Qualification, Academic Qualification, Job Effectiveness, Job Efficiency, Educational Planning, Teacher Training and Development, Nigeria.

Variation in the Understanding of Lutheranism and Its Implications for Religious Education : Meaning Discernment of Students and Teachers in Finnish Upper Secondary Schools

The study investigated variation in the ways in which a group of students and teachers of Evangelical Lutheran religious education in Finnish upper secondary schools understand Lutheranism and searched for educational implications for learning in religious education. The aim of understanding the qualitative variation in understanding Lutheranism was explored through the relationship between the following questions, which correspond to the results reported in the following original refereed publications: 1) How do Finnish students understand Lutheranism? 2) How do Finnish teachers of religious education constitute the meaning of Lutheranism? 3) How could phenomenography and the Variation Theory of Learning contribute to learning about and from religion in the context of Finnish Lutheran Religious Education as compared to religious education in the UK? Two empirical studies (Hella, 2007; Hella, 2008) were undertaken from a phenomenographic research perspective (e.g., Marton, 1981) and the Variation Theory of Learning (e.g., Marton & Tsui et al. 2004) that developed from it. Data was collected from 63 upper secondary students and 40 teachers of religious education through written tasks with open questions and complementary interviews with 11 students and 20 teachers for clarification of meanings. The two studies focused on the content and structure of meaning discernment in students and teachers expressed understandings of Lutheranism. Differences in understandings are due to differences in the meanings that are discerned and focused on. The key differences between the ways students understand varied from understanding Lutheranism as a religion to personal faith with its core in mercy. The logical relationships between the categories that describe variation in understanding express a hierarchy of ascending complexity, according to which more developed understandings are inclusive of less developed ones. The ways the teachers understand relate to student s understandings in a sequential manner. Phenomenography and Variation Theory were discussed in the context of religious education in Finland and the UK in relation to the theoretical notion of learning about and from religion (Hella & Wright, 2008). The thesis suggests that variation theory enables religious educators to recognise the unity of learning about and from religion, as learning is always learning about something and involves simultaneous engagement with the object of learning and development as a person. The study also suggests that phenomenography and variation theory offer a means by which it is possible for academics, policy makers, curriculum designers, teachers and students to learn to discern different ways of understanding the contested nature of religions. Keywords: Lutheranism, understanding, variation, teaching, learning, phenomenography, religious education

Engineering the pentose phosphate pathway of Saccharomyces cerevisiae for production of ethanol and xylitol

The baker s yeast Saccharomyces cerevisiae has a long tradition in alcohol production from D-glucose of e.g. starch. However, without genetic modifications it is unable to utilise the 5-carbon sugars D-xylose and L arabinose present in plant biomass. In this study, one key metabolic step of the catabolic D-xylose pathway in recombinant D-xylose-utilising S. cerevisiae strains was studied. This step, carried out by xylulokinase (XK), was shown to be rate-limiting, because overexpression of the xylulokinase-encoding gene XKS1 increased both the specific ethanol production rate and the yield from D xylose. In addition, less of the unwanted side product xylitol was produced. Recombinant D-xylose-utilizing S. cerevisiae strains have been constructed by expressing the genes coding for the first two enzymes of the pathway, D-xylose reductase (XR) and xylitol dehydrogenase (XDH) from the D-xylose-utilising yeast Pichia stipitis. In this study, the ability of endogenous genes of S. cerevisiae to enable D-xylose utilisation was evaluated. Overexpression of the GRE3 gene coding for an unspecific aldose reductase and the ScXYL2 gene coding for a xylitol dehydrogenase homologue enabled growth on D-xylose in aerobic conditions. However, the strain with GRE3 and ScXYL2 had a lower growth rate and accumulated more xylitol compared to the strain with the corresponding enzymes from P. stipitis. Use of the strictly NADPH-dependent Gre3p instead of the P. stipitis XR able to utilise both NADH and NADPH leads to a more severe redox imbalance. In a S. cerevisiae strain not engineered for D-xylose utilisation the presence of D-xylose increased xylitol dehydrogenase activity and the expression of the genes SOR1 or SOR2 coding for sorbitol dehydrogenase. Thus, D-xylose utilisation by S. cerevisiae with activities encoded by ScXYL2 or possibly SOR1 or SOR2, and GRE3 is feasible, but requires efficient redox balance engineering. Compared to D-xylose, D-glucose is a cheap and readily available substrate and thus an attractive alternative for xylitol manufacture. In this study, the pentose phosphate pathway (PPP) of S. cerevisiae was engineered for production of xylitol from D-glucose. Xylitol was formed from D-xylulose 5-phosphate in strains lacking transketolase activity and expressing the gene coding for XDH from P. stipitis. In addition to xylitol, ribitol, D-ribose and D-ribulose were also formed. Deletion of the xylulokinase-encoding gene increased xylitol production, whereas the expression of DOG1 coding for sugar phosphate phosphatase increased ribitol, D-ribose and D-ribulose production. Strains lacking phosphoglucose isomerase (Pgi1p) activity were shown to produce 5 carbon compounds through PPP when DOG1 was overexpressed. Expression of genes encoding glyceraldehyde 3-phosphate dehydrogenase of Bacillus subtilis, GapB, or NAD-dependent glutamate dehydrogenase Gdh2p of S. cerevisiae, altered the cellular redox balance and enhanced growth of pgi1 strains on D glucose, but co-expression with DOG1 reduced growth on higher D-glucose concentrations. Strains lacking both transketolase and phosphoglucose isomerase activities tolerated only low D-glucose concentrations, but the yield of 5-carbon sugars and sugar alcohols on D-glucose was about 50% (w/w).

Mu in vitro transposition applications in protein engineering

Transposons, mobile genetic elements that are ubiquitous in all living organisms have been used as tools in molecular biology for decades. They have the ability to move into discrete DNA locations with no apparent homology to the target site. The utility of transposons as molecular tools is based on their ability to integrate into various DNA sequences efficiently, producing extensive mutant clone libraries that can be used in various molecular biology applications. Bacteriophage Mu is one of the most useful transposons due to its well-characterized and simple in vitro transposition reaction. This study establishes the properties of the Mu in vitro transposition system as a versatile multipurpose tool in molecular biology. In addition, this study describes Mu-based applications for engineering proteins by random insertional transposon mutagenesis in order to study structure-function relationships in proteins. We initially characterized the properties of the minimal Mu in vitro transposition system. We showed that the Mu transposition system works efficiently and accurately and produces insertions into a wide spectrum of target sites in different DNA molecules. Then, we developed a pentapeptide insertion mutagenesis strategy for inserting random five amino acid cassettes into proteins. These protein variants can be used especially for screening important sites for protein-protein interactions. Also, the system may produce temperature-sensitive variants of the protein of interest. Furthermore, we developed an efficient screening system for high-resolution mapping of protein-protein interfaces with the pentapeptide insertion mutagenesis. This was accomplished by combining the mutagenesis with subsequent yeast two-hybrid screening and PCR-based genetic footprinting. This combination allows the analysis of the whole mutant library en masse, without the need for producing or isolating separate mutant clones, and the protein-protein interfaces can be determined at amino acid accuracy. The system was validated by analysing the interacting region of JFC1 with Rab8A, and we show that the interaction is mediated via the JFC1 Slp homology domain. In addition, we developed a procedure for the production of nested sets of N- and C-terminal deletion variants of proteins with the Mu system. These variants are useful in many functional studies of proteins, especially in mapping regions involved in protein-protein interactions. This methodology was validated by analysing the region in yeast Mso1 involved in an interaction with Sec1. The results of this study show that the Mu in vitro transposition system is versatile for various applicational purposes and can efficiently be adapted to random protein engineering applications for functional studies of proteins.