Bridging East and West : The Establishment of the International Institute for Applied Systems Analysis (IIASA) in the United States Foreign Policy of Bridge Building, 1964-1972.

The dissertation examines the foreign policies of the United States through the prism of science and technology. In the focal point of scrutiny is the policy establishing the International Institute for Applied Systems Analysis (IIASA) and the development of the multilateral part of bridge building in American foreign policy during the 1960s and early 1970s. After a long and arduous negotiation process, the institute was finally established by twelve national member organizations from the following countries: Bulgaria, Canada, Czechoslovakia, Federal Republic of Germany (FRG), France, German Democratic Republic (GDR), Great Britain, Italy, Japan, Poland, Soviet Union and United States; a few years later Sweden, Finland and the Netherlands also joined. It is said that the goal of the institute was to bring together researchers from East and West to solve pertinent problems caused by the modernization process experienced in industrialized world. It originates from President Lyndon B. Johnson s bridge building policies that were launched in 1964, and was set in a well-contested and crowded domain of other international organizations of environmental and social planning. Since the distinct need for yet another organization was not evident, the process of negotiations in this multinational environment enlightens the foreign policy ambitions of the United States on the road to the Cold War détente. The study places this project within its political era, and juxtaposes it with other international organizations, especially that of the OECD, ECE and NATO. Conventionally, Lyndon Johnson s bridge building policies have been seen as a means to normalize its international relations bilaterally with different East European countries, and the multilateral dimension of the policy has been ignored. This is why IIASA s establishment process in this multilateral environment brings forth new information on US foreign policy goals, the means to achieve these goals, as well as its relations to other advanced industrialized societies before the time of détente, during the 1960s and early 1970s. Furthermore, the substance of the institute applied systems analysis illuminates the differences between European and American methodological thinking in social planning. Systems analysis is closely associated with (American) science and technology policies of the 1960s, especially in its military administrative applications, thus analysis within the foreign policy environment of the United States proved particularly fruitful. In the 1960s the institutional structures of European continent with faltering, and the growing tendencies of integration were in flux. One example of this was the long, drawn-out process of British membership in the EEC, another is de Gaulle s withdrawal from NATO s military-political cooperation. On the other hand, however, economic cooperation in Europe between East and West, and especially with the Soviet Union was expanding rapidly. This American initiative to form a new institutional actor has to be seen in that structural context, showing that bridge building was needed not only to the East, but also to the West. The narrative amounts to an analysis of how the United States managed both cooperation and conflict in its hegemonic aspirations in the emerging modern world, and how it used its special relationship with the United Kingdom to achieve its goals. The research is based on the archives of the United States, Great Britain, Sweden, Finland, and IIASA. The primary sources have been complemented with both contemporary and present day research literature, periodicals, and interviews.

Näkemyksiä käsityöopetuksen kehitystarpeista yhtenäisessä perusopetuksessa

The objective of this study was to find out what development targets craft teachers could identify in the comprehensive school classes 1 through 9 after the curriculum of the year 2004 had declared craft education uniform in textile and technical craft. Earlier research had shown that after this curricular reform craft education had been carried out in dissimilar ways in different municipalities and schools. This causes differences in the contents of teaching and thus in learning outcomes on national level. The most problematic situations occur on the 7th grade when the classes contain pupils with very heterogeneous skill levels. My intention is to find general themes in craft education that are significant when considering developmental objectives. The problem was explored by four research questions as follows: What kind of problems have craft teachers confronted during the application of the curriculum 2004, what are the most important objectives and contents in craft for the comprehensive school, how craft education should be arranged in the future and what prerequisites should be considered to generate high quality craft education? The study was carried out by a qualitative research approach. The informants consisted of 21 persons, out of which 15 were textile or technical teachers and six were textile or technical teacher students. The research data was collected in the form of short open narratives, based on a partially structured inquiry. Respectively content analysis was applied for analysis of the narratives. Research results revealed that craft teachers were mainly satisfied in uniform craft and hoped that both textile and technical craft could be compulsory school subjects for both genders. Textile and technical craft should be defined as separate independent school subjects, both of which should be developed with broader and high quality contents. Craft subjects should be allocated more teaching time. Teachers asked for a more logically proceeding curriculum, initiating from the beginning to the end of the compulsory school. It was suggested that this could be done by a qualified subject teacher. A uniform curriculum solution must be found for the whole country.

From Polymorph Screening to Dissolution Testing - Solid Phase Analysis during Pharmaceutical Development and Manufacturing

Solid materials can exist in different physical structures without a change in chemical composition. This phenomenon, known as polymorphism, has several implications on pharmaceutical development and manufacturing. Various solid forms of a drug can possess different physical and chemical properties, which may affect processing characteristics and stability, as well as the performance of a drug in the human body. Therefore, knowledge and control of the solid forms is fundamental to maintain safety and high quality of pharmaceuticals. During manufacture, harsh conditions can give rise to unexpected solid phase transformations and therefore change the behavior of the drug. Traditionally, pharmaceutical production has relied on time-consuming off-line analysis of production batches and finished products. This has led to poor understanding of processes and drug products. Therefore, new powerful methods that enable real time monitoring of pharmaceuticals during manufacturing processes are greatly needed. The aim of this thesis was to apply spectroscopic techniques to solid phase analysis within different stages of drug development and manufacturing, and thus, provide a molecular level insight into the behavior of active pharmaceutical ingredients (APIs) during processing. Applications to polymorph screening and different unit operations were developed and studied. A new approach to dissolution testing, which involves simultaneous measurement of drug concentration in the dissolution medium and in-situ solid phase analysis of the dissolving sample, was introduced and studied. Solid phase analysis was successfully performed during different stages, enabling a molecular level insight into the occurring phenomena. Near-infrared (NIR) spectroscopy was utilized in screening of polymorphs and processing-induced transformations (PITs). Polymorph screening was also studied with NIR and Raman spectroscopy in tandem. Quantitative solid phase analysis during fluidized bed drying was performed with in-line NIR and Raman spectroscopy and partial least squares (PLS) regression, and different dehydration mechanisms were studied using in-situ spectroscopy and partial least squares discriminant analysis (PLS-DA). In-situ solid phase analysis with Raman spectroscopy during dissolution testing enabled analysis of dissolution as a whole, and provided a scientific explanation for changes in the dissolution rate. It was concluded that the methods applied and studied provide better process understanding and knowledge of the drug products, and therefore, a way to achieve better quality.

Integrating biodiversity conservation into forestry : an empirical analysis of institutional adaptation

Integrating biodiversity conservation into forest management in non-industrial private forests requires changes in the practices of those public and private actors that have implementing responsibilities and whose strategic and operational opportunities are at stake. Understanding this kind of context-dependent institutional adaptation requires bridging between two analytical approaches: policy implementation and organizational adaptation, backed up with empirical analysis. The empirical analyses recapitulated in this thesis summary address organizational competences, specialization, professional judgment, and organizational networks. The analyses utilize qualitative and quantitative data from public and private sector organizations as well as associations. The empirical analyses produced stronger signals of policy implementation than of organizational adaptation. The organizations recognized the policy and social demand for integrating biodiversity conservation into forest management and their professionals were in favor of conserving biodiversity. However, conservation was integrated to forest management so tightly that it could be said to be subsumed by mainstream forestry. The organizations had developed some competences for conservation but the competences did not differentiate among the organizations other than illustrating the functional differences between industry, administration and associations. The networks that organizations depended on consisted of traditional forestry actors and peers both in planning policy and at the operational level. The results show that he demand for biodiversity conservation has triggered incremental changes in organizations. They can be considered inert regarding this challenge. Isomorphism is advanced by hierarchical guidance and standardization, and by professional norms. Analytically, this thesis contributes to the understanding of organizational behavior across the public and private sector boundaries. The combination of a policy implementation approach inherent in analysis of public policies in hierarchical administration settings, and organizational adaptation typically applied to private sector organizations, highlights the importance of institutional interpretation. Institutional interpretation serves the understanding of the empirically identified diversions from the basic tenets of the two approaches. Attention to institutions allows identification of the overlap of the traditionally segregated approaches.

Root system traits of Norway spruce, Scots pine, and silver birch in mixed boreal forests: an analysis of root architecture, morphology, and anatomy

The aim of this thesis was to unravel the functional-structural characteristics of root systems of Betula pendula Roth., Picea abies (L.) Karst., and Pinus sylvestris L. in mixed boreal forest stands differing in their developmental stage and site fertility. The root systems of these species had similar structural regularities: horizontally-oriented shallow roots defined the horizontal area of influence, and within this area, each species placed fine roots in the uppermost soil layers, while sinker roots defined the maximum rooting depth. Large radial spread and high ramification of coarse roots, and the high specific root length (SRL) and root length density (RLD) of fine roots indicated the high belowground competitiveness and root plasticity of B. pendula. Smaller radial root spread and sparser branching of coarse roots, and low SRL and RLD of fine roots of the conifers could indicate their more conservative resource use and high association with and dependence on ectomycorrhiza-forming fungi. The vertical fine root distributions of the species were mostly overlapping, implying the possibility for intense belowground competition for nutrients. In each species, conduits tapered and their frequency increased from distal roots to the stem, from the stem to the branches, and to leaf petioles in B. pendula. Conduit tapering was organ-specific in each species violating the assumptions of the general vascular scaling model (WBE). This reflects the hierarchical organization of a tree and differences between organs in the relative importance of transport, safety, and mechanical demands. The applied root model was capable of depicting the mass, length and spread of coarse roots of B. pendula and P. abies, and to the lesser extent in P. sylvestris. The roots did not follow self-similar fractal branching, because the parameter values varied within the root systems. Model parameters indicate differences in rooting behavior, and therefore different ecophysiological adaptations between species.