Principles of Pitch Organization in Béla Bartók's 'Duke Bluebeard's Castle'

The topic of my doctoral thesis is to demonstrate the usefulness of incorporating tonal and modal elements into a pitch-web square analysis of Béla Bartók's (1881-1945) opera, 'A kékszakállú herceg vára' ('Duke Bluebeard's Castle'). My specific goal is to demonstrate that different musical materials, which exist as foreground melodies or long-term key progressions, are unified by the unordered pitch set {0,1,4}, which becomes prominent in different sections of Bartók's opera. In Bluebeard's Castle, the set {0,1,4} is also found as a subset of several tetrachords: {0,1,4,7}, {0,1,4,8}, and {0,3,4,7}. My claim is that {0,1,4} serves to link music materials between themes, between sections, and also between scenes. This study develops an analytical method, drawn from various theoretical perspectives, for conceiving superposed diatonic spaces within a hybrid pitch-space comprised of diatonic and chromatic features. The integrity of diatonic melodic lines is retained, which allows for a non-reductive understanding of diatonic superposition, without appealing to pitch centers or specifying complete diatonic collections. Through combining various theoretical insights of the Hungarian scholar Ernő Lendvai, and the American theorists Elliott Antokoletz, Paul Wilson and Allen Forte, as well as the composer himself, this study gives a detailed analysis of the opera's pitch material in a way that combines, complements, and expands upon the studies of those scholars. The analyzed pitch sets are represented on Aarre Joutsenvirta's note-web square, which adds a new aspect to the field of Bartók analysis. Keywords: Bartók, Duke Bluebeard's Castle (Op. 11), Ernő Lendvai, axis system, Elliott Antokoletz, intervallic cycles, intervallic cells, Allen Forte, set theory, interval classes, interval vectors, Aarre Joutsenvirta, pitch-web square, pitch-web analysis.

Kehittämisen kompastuskivet - myytit kehittämishankkeen keskusteluissa

I studied discussions during development project. Aim of the study was to analyse, what way workers represented their work: how normalized way of interpretation myths appeared in discourse and what consequences these utterances caused to drift of discussion. Change laboratory, which is a development method, is based to developmental work research methodology. Development is designed to be successful by learning activity and learning acts. Preventing factors of learning have been studied widely. Research has leaned to concept of resistance to change. Phenomenon of learning has been interpreted to be successful only if everybody has an agreement about the situation. There is also a new kind of concept of resistance. Resistance can be seen as a part of learning, normal processing of the learning activity. Another preventing factor can be seen as disorders of discourse, which are verbal ways of telling something that aren t real. Theoretically I consider these verbal ways as myth interpretations, which can be used as argumentative tools. I used analysis of discourse as an analytical method. Results of analysis revealed four different myth interpretations in workers discussions. Character of work was been described with myths unforeseen situations and disturbances are normal . Work was also described to be functional with myths system works and workers cause disturbances . Change laboratory discussions can be described as different social languages, which caused diverse perspectives to workers and researchers representations. Social languages also affected the way people analysed disturbances and system. Critical phase of change laboratory method seems to be analysis of disturbances and planning new mode of action. Myth utterances were used to reject ways of developing, analysis of system level and need of development. Myth utterances worked three different ways: ineffective, active or passive.

Effects of environmental variation on ecological and evolutionary dynamics

Environmental variation is a fact of life for all the species on earth: for any population of any particular species, the local environmental conditions are liable to vary in both time and space. In today's world, anthropogenic activity is causing habitat loss and fragmentation for many species, which may profoundly alter the characteristics of environmental variation in remaining habitat. Previous research indicates that, as habitat is lost, the spatial configuration of remaining habitat will increasingly affect the dynamics by which populations are governed. Through the use of mathematical models, this thesis asks how environmental variation interacts with species properties to influence population dynamics, local adaptation, and dispersal evolution. More specifically, we couple continuous-time continuous-space stochastic population dynamic models to landscape models. We manipulate environmental variation via parameters such as mean patch size, patch density, and patch longevity. Among other findings, we show that a mixture of high and low quality habitat is commonly better for a population than uniformly mediocre habitat. This conclusion is justified by purely ecological arguments, yet the positive effects of landscape heterogeneity may be enhanced further by local adaptation, and by the evolution of short-ranged dispersal. The predicted evolutionary responses to environmental variation are complex, however, since they involve numerous conflicting factors. We discuss why the species that have high levels of local adaptation within their ranges may not be the same species that benefit from local adaptation during range expansion. We show how habitat loss can lead to either increased or decreased selection for dispersal depending on the type of habitat and the manner in which it is lost. To study the models, we develop a recent analytical method, Perturbation expansion, to enable the incorporation of environmental variation. Within this context, we use two methods to address evolutionary dynamics: Adaptive dynamics, which assumes mutations occur infrequently so that the ecological and evolutionary timescales can be separated, and via Genotype distributions, which assume mutations are more frequent. The two approaches generally lead to similar predictions yet, exceptionally, we show how the evolutionary response of dispersal behaviour to habitat turnover may qualitatively depend on the mutation rate.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Development of analytical techniques for studies on dispersion of actinides in the environment and characterization of environmental radioactive particles

Radioactive particles from three locations were investigated for elemental composition, oxidation states of matrix elements, and origin. Instrumental techniques applied to the task were scanning electron microscopy, X-ray and gamma-ray spectrometry, secondary ion mass spectrometry, and synchrotron radiation based microanalytical techniques comprising X-ray fluorescence spectrometry, X-ray fluorescence tomography, and X-ray absorption near-edge structure spectroscopy. Uranium-containing low activity particles collected from Irish Sea sediments were characterized in terms of composition and distribution of matrix elements and the oxidation states of uranium. Indications of the origin were obtained from the intensity ratios and the presence of thorium, uranium, and plutonium. Uranium in the particles was found to exist mostly as U(IV). Studies on plutonium particles from Runit Island (Marshall Islands) soil indicated that the samples were weapon fuel fragments originating from two separate detonations: a safety test and a low-yield test. The plutonium in the particles was found to be of similar age. The distribution and oxidation states of uranium and plutonium in the matrix of weapon fuel particles from Thule (Greenland) sediments were investigated. The variations in intensity ratios observed with different techniques indicated more than one origin. Uranium in particle matrixes was mostly U(IV), but plutonium existed in some particles mainly as Pu(IV), and in others mainly as oxidized Pu(VI). The results demonstrated that the various techniques were effectively applied in the characterization of environmental radioactive particles. An on-line method was developed for separating americium from environmental samples. The procedure utilizes extraction chromatography to separate americium from light lanthanides, and cation exchange to concentrate americium before the final separation in an ion chromatography column. The separated radiochemically pure americium fraction is measured by alpha spectrometry. The method was tested with certified sediment and soil samples and found to be applicable for the analysis of environmental samples containing a wide range of Am-241 activity. Proceeding from the on-line method developed for americium, a method was also developed for separating plutonium and americium. Plutonium is reduced to Pu(III), and separated together with Am(III) throughout the procedure. Pu(III) and Am(III) are eluted from the ion chromatography column as anionic dipicolinate and oxalate complexes, respectively, and measured by alpha spectrometry.

Emotional experience in psychotherapeutic interaction : Conversation analytical study on cognitive psychotherapy

The dissertation examines how emotional experiences are oriented to in the details of psychotherapeutic interaction. The data (57 audio recorded sessions) come from one therapist-patient dyad in cognitive psychotherapy. Conversation analysis is used as method. The dissertation consists of 4 original articles and a summary. The analyses explicate the therapist s practices of responding to the patient s affective expressions. Different types of affiliating responses are identified. It is shown that the affiliating responses are combined with, or build grounds for, more interpretive and challenging actions. The study also includes a case study of a session with strong misalignment between the therapist s and patient s orientations, showing how this misalignment is managed by the therapist. Moreover, through a longitudinal analysis of the transformation of a sequence type, the study suggests that therapeutic change processes can be located to sequential relations of actions. The practices found in this study are compared to earlier research on everyday talk and on medical encounters. It is suggested that in psychotherapeutic interaction, the generic norms of interaction considering affiliation and epistemic access, are modified for the purposes of therapeutic work. The study also shows that the practices of responding to emotional experience in psychotherapy can deviate from the everyday practices of affiliation. The results of the study are also discussed in terms of concepts arising from clinical theory. These include empathy, validation of emotion, therapeutic alliance, interpretation, challenging beliefs, and therapeutic change. The therapist s approach described in this study involves practical integration of different clinical theories. In general terms, the study suggests that in the details of interaction, psychotherapy recurrently performs a dual task of empathy and challenging in relation to the patient s ways of describing their experiences. Methodologically, the study discusses the problem of identifying actions in conversation analysis of psychotherapy and emotional interaction, and the possibility to apply conversation analysis in the study of therapeutic change.

Method-MS, final report 2010

Radiometric determination methods, such as alpha spectrometry require long counting times when low activities are to be determined. Mass spectrometric techniques as Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Thermal Ionisation Mass Spectrometry (TIMS) and Accelerator Mass Spectrometry (AMS) have shown several advantages compared to traditional methods when measuring long-lived radionuclides. Mass spectrometric methods for determination of very low concentrations of elemental isotopes, and thereby isotopic ratios, have been developed using a variety of ion sources. Although primarily applied to the determination of the lighter stable element isotopes and radioactive isotopes in geological studies, the techniques can equally well be applied to the measurement of activity concentrations of long-lived low-level radionuclides in various samples using “isotope dilution” methods such as those applied in inductively coupled plasma mass spectrometry (ICP-MS). Due to the low specific activity of long-lived radionuclides, many of these are more conveniently detected using mass spectrometric techniques. Mass spectrometry also enables the individual determination of Pu-239 and Pu-240, which cannot be obtained by alpha spectrometry. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) are rapidly growing techniques for the ultra-trace analytical determination of stable and long-lived isotopes and have a wide potential within environmental science, including ecosystem tracers and radio ecological studies. Such instrumentation, of course needs good radiochemical separation, to give best performance. The objectives of the project is to identify current needs and problems within low-level determination of long-lived radioisotopes by ICP-MS, to perform intercalibration and development and improvement of ICP-MS methods for the measurement of radionuclides and isotope ratios and to develop new methods based on modified separation chemistry applied to new auxiliary equipment.