Marking one-summer old whitefish with fluorescent pigment spraying method and results of whitefish stockings in the Gulf of Bothnia

Anadromous whitefish is one of the most important fish species in the Finnish coastal fisheries in the Gulf fo Bothnia. To compensate the lost reproduction due to river damming and to support the fisheries, several million one-summer old whitefish are released yearly into the Gulf of Bothnia. Since there are naturally reproducing whitefish in the Gulf as well, and the wild and stocked fish can not be separated in the catch, stocking impact can only be estimated by marking the stocked fish. Due to the small size and large number of released whitefish, the scattered fishery and large area where the whitefish migrate, most of the traditionally used fish marking methods were either unsuitable (e.g. Carlin-tags) or proved to be too expensive (e.g. coded wire tags). Fluorescent pigment spraying method offers a fast and cost-effective method to mass-mark young fish. However, the results are not always satisfactory due to low long-time retention of the marks in some species. The method has to be tested and proper marking conditions and methods determined for each species. This thesis is based on work that was accomplished while developing the fluorescent pigment spraying method for marking one-summer old whitefish fingerlings, and it draws together the results of mass-marking whitefish fingerlings that were released in the Gulf of Bothnia. Fluorescent pigment spraying method is suitable for one-summer old whitefish larger than 8 cm total length. The water temperature during the marking should not exceed 10o C. Suitable spraying pressure is 6 bars measured in the compressor outlet, and the distance of the spraying gun nozzle should be ca 20 cm from the fish. Under such conditions, the marking results in long-term retention of the mark with low or no mortality. The stress level of the fish (measured as muscle water content) rises during the marking procedure, but if the fish are allowed to recover after marking, the overall stress level remains within the limits observed in normal fish handling during the capture-loading-transport-stocking procedure. The marked whitefish fingerlings are released into the sea at larger size and later in the season than the wild whitefish. However, the stocked individuals migrate to the southern feeding grounds in a similar pattern to the wild ones. The catch produced by whitefish stocking in the Gulf of Bothnia varied between released fingerling groups, but was within the limits reported elsewhere in Finland. The releases in the southern Bothnian Bay resulted in a larger catch than those made in the northern Bothnian Bay. The size of the released fingerlings seemed to have some effect on survival of the fish during the first winter in the sea. However, when the different marking groups were compared, the mean fingerling size was not related to stocking success.

Functional Analysis of MrpL55, Vig and Mat1 Acting at the Crossroad of Cell Cycle, Transcription and Metabolism Regulation

Cell proliferation, transcription and metabolism are regulated by complex partly overlapping signaling networks involving proteins in various subcellular compartments. The objective of this study was to increase our knowledge on such regulatory networks and their interrelationships through analysis of MrpL55, Vig, and Mat1 representing three gene products implicated in regulation of cell cycle, transcription, and metabolism. Genome-wide and biochemical in vitro studies have previously revealed MrpL55 as a component of the large subunit of the mitochondrial ribosome and demonstrated a possible role for the protein in cell cycle regulation. Vig has been implicated in heterochromatin formation and identified as a constituent of the RNAi-induced silencing complex (RISC) involved in cell cycle regulation and RNAi-directed transcriptional gene silencing (TGS) coupled to RNA polymerase II (RNAPII) transcription. Mat1 has been characterized as a regulatory subunit of cyclin-dependent kinase 7 (Cdk7) complex phosphorylating and regulating critical targets involved in cell cycle progression, energy metabolism and transcription by RNAPII. The first part of the study explored whether mRpL55 is required for cell viability or involved in a regulation of energy metabolism and cell proliferation. The results revealed a dynamic requirement of the essential Drosophila mRpL55 gene during development and suggested a function of MrpL55 in cell cycle control either at the G1/S or G2/M transition prior to cell differentiation. This first in vivo characterization of a metazoan-specific constituent of the large subunit of mitochondrial ribosome also demonstrated forth compelling evidence of the interconnection of nuclear and mitochondrial genomes as well as complex functions of the evolutionarily young metazoan-specific mitochondrial ribosomal proteins. In studies on the Drosophila RISC complex regulation, it was noted that Vig, a protein involved in heterochromatin formation, unlike other analyzed RISC associated proteins Argonaute2 and R2D2, is dynamically phosphorylated in a dsRNA-independent manner. Vig displays similarity with a known in vivo substrate for protein kinase C (PKC), human chromatin remodeling factor Ki-1/57, and is efficiently phosphorylated by PKC on multiple sites in vitro. These results suggest that function of the RISC complex protein Vig in RNAi-directed TGS and chromatin modification may be regulated through dsRNA-independent phosphorylation by PKC. In the third part of this study the role of Mat1 in regulating RNAPII transcription was investigated using cultured murine immortal fibroblasts with a conditional allele of Mat1. The results demonstrated that phosphorylation of the carboxy-terminal domain (CTD) of the large subunit of RNAPII in the heptapeptide YSPTSPS repeat in Mat-/- cells was over 10-fold reduced on Serine-5 and subsequently on Serine-2. Occupancy of the hypophosphorylated RNAPII in gene bodies was detectably decreased, whereas capping, splicing, histone methylation and mRNA levels were generally not affected. However, a subset of transcripts in absence of Mat1 was repressed and associated with decreased occupancy of RNAPII at promoters as well as defective capping. The results identify the Cdk7-CycH-Mat1 kinase submodule of TFIIH as a stimulatory non-essential regulator of transcriptional elongation and a genespecific essential factor for stable binding of RNAPII at the promoter region and capping. The results of these studies suggest important roles for both MrpL55 and Mat1 in cell cycle progression and their possible interplay at the G2/M stage in undifferentiated cells. The identified function of Mat1 and of TFIIH kinase complex in gene-specific transcriptional repression is challenging for further studies in regard to a possible link to Vig and RISC-mediated transcriptional gene silencing.

Molecular Alterations in Asbestos-Related Lung Cancer

Background: Asbestos is a well known cancer-causing mineral fibre, which has a synergistic effect on lung cancer risk in combination with tobacco smoking. Several in vitro and in vivo experiments have demonstrated that asbestos can evoke chromosomal damage and cause alterations as well as gene expression changes. Lung tumours, in general, have very complex karyotypes with several recurrently gained and lost chromosomal regions and this has made it difficult to identify specific molecular changes related primarily to asbestos exposure. The main aim of these studies has been to characterize asbestos-related lung cancer at a molecular level. Methods: Samples from asbestos-exposed and non-exposed lung cancer patients were studied using array comparative genomic hybridization (aCGH) and fluorescent in situ hybridization (FISH) to detect copy number alterations (CNA) as well as microsatellite analysis to detect allelic imbalance (AI). In addition, asbestos-exposed cell lines were studied using gene expression microarrays. Results: Eighteen chromosomal regions showing differential copy number in the lung tumours of asbestos-exposed patients compared to those of non-exposed patients were identified. The most significant differences were detected at 2p21-p16.3, 5q35.3, 9q33.3-q34.11, 9q34.13-q34.3, 11p15.5, 14q11.2 and 19p13.1-p13.3 (p<0.005). The alterations at 2p and 9q were validated and characterized in detail using AI and FISH analysis in a larger study population. Furthermore, in vitro studies were performed to examine the early gene expression changes induced by asbestos in three different lung cell lines. The results revealed specific asbestos-associated gene expression profiles and biological processes as well as chromosomal regions enriched with genes believed to contribute to the common asbestos-related responses in the cell lines. Interestingly, the most significant region enriched with asbestos-response genes was identified at 2p22, close to the previously identified region showing asbestos-related CNA in lung tumours. Additionally, in this thesis, the dysregulated biological processes (Gene Ontology terms) detected in the cell line experiment were compared to dysregulated processes identified in patient samples in a later study (Ruosaari et al., 2008a). Commonly affected processes such as those related to protein ubiquitination, ion transport and surprisingly sensory perception of smell were identified. Conclusions: The identification of specific CNA and dysregulated biological processes shed some light on the underlying genes acting as mediators in asbestos-related lung carcinogenesis. It is postulated that the combination of several asbestos-specific molecular alterations could be used to develop a diagnostic method for the identification of asbestos-related lung cancer.

Studies on diamond-like carbon and novel diamond-like carbon polymer hybrid coatings deposited with filtered pulsed arc discharge method

The main obstacle for the application of high quality diamond-like carbon (DLC) coatings has been the lack of adhesion to the substrate as the coating thickness is increased. The aim of this study was to improve the filtered pulsed arc discharge (FPAD) method. With this method it is possible to achieve high DLC coating thicknesses necessary for practical applications. The energy of the carbon ions was measured with an optoelectronic time-of-flight method. An in situ cathode polishing system used for stabilizing the process yield and the carbon ion energies is presented. Simultaneously the quality of the coatings can be controlled. To optimise the quality of the deposition process a simple, fast and inexpensive method using silicon wafers as test substrates was developed. This method was used for evaluating the suitability of a simplified arc-discharge set-up for the deposition of the adhesion layer of DLC coatings. A whole new group of materials discovered by our research group, the diamond-like carbon polymer hybrid (DLC-p-h) coatings, is also presented. The parent polymers used in these novel coatings were polydimethylsiloxane (PDMS) and polytetrafluoroethylene (PTFE). The energy of the plasma ions was found to increase when the anode-cathode distance and the arc voltage were increased. A constant deposition rate for continuous coating runs was obtained with an in situ cathode polishing system. The novel DLC-p-h coatings were found to be water and oil repellent and harder than any polymers. The lowest sliding angle ever measured from a solid surface, 0.15 ± 0.03°, was measured on a DLC-PDMS-h coating. In the FPAD system carbon ions can be accelerated to high energies (≈ 1 keV) necessary for the optimal adhesion (the substrate is broken in the adhesion and quality test) of ultra thick (up to 200 µm) DLC coatings by increasing the anode-cathode distance and using high voltages (up to 4 kV). An excellent adhesion can also be obtained with the simplified arc-discharge device. To maintain high process yield (5µm/h over a surface area of 150 cm2) and to stabilize the carbon ion energies and the high quality (sp3 fraction up to 85%) of the resulting coating, an in situ cathode polishing system must be used. DLC-PDMS-h coating is the superior candidate coating material for anti-soiling applications where also hardness is required.

Search for a Light Higgs Boson in Central Exclusive Diffraction: Method and Detectors

By detecting leading protons produced in the Central Exclusive Diffractive process, p+p → p+X+p, one can measure the missing mass, and scan for possible new particle states such as the Higgs boson. This process augments - in a model independent way - the standard methods for new particle searches at the Large Hadron Collider (LHC) and will allow detailed analyses of the produced central system, such as the spin-parity properties of the Higgs boson. The exclusive central diffractive process makes possible precision studies of gluons at the LHC and complements the physics scenarios foreseen at the next e+e− linear collider. This thesis first presents the conclusions of the first systematic analysis of the expected precision measurement of the leading proton momentum and the accuracy of the reconstructed missing mass. In this initial analysis, the scattered protons are tracked along the LHC beam line and the uncertainties expected in beam transport and detection of the scattered leading protons are accounted for. The main focus of the thesis is in developing the necessary radiation hard precision detector technology for coping with the extremely demanding experimental environment of the LHC. This will be achieved by using a 3D silicon detector design, which in addition to the radiation hardness of up to 5×10^15 neutrons/cm2, offers properties such as a high signal-to- noise ratio, fast signal response to radiation and sensitivity close to the very edge of the detector. This work reports on the development of a novel semi-3D detector design that simplifies the 3D fabrication process, but conserves the necessary properties of the 3D detector design required in the LHC and in other imaging applications.

Toiminta, valta ja kokemus organisaation muutoksessa : Tutkimus kolmesta suuryrityksestä

Action, Power and Experience in Organizational Change - A Study of Three Major Corporations This study explores change management and resistance to change as social activities and power displays through worker experiences in three major Finnish corporations. Two important sensitizing concepts were applied. Firstly, Richard Sennett's perspective on work in the new form of capitalism, and its shortcomings - the lack of commitment and freedom accompanied by the disruption to lifelong career planning and the feeling of job insecurity - offered a fruitful starting point for a critical study. Secondly, Michel Foucault's classical concept of power, treated as anecdotal, interactive and nonmeasurable, provided tools for analyzing change-enabling and resisting acts. The study bridges the gap between management and social sciences. The former have usually concentrated on leadership issues, best practices and goal attainment, while the latter have covered worker experiences, power relations and political conflicts. The study was motivated by three research questions. Firstly, why people resist or support changes in their work, work environment or organization, and the kind of analyses these behavioural choices are based on. Secondly, the kind of practical forms which support for, and resistance to change take, and how people choose the different ways of acting. Thirdly, how the people involved experience and describe their own subject position and actions in changing environments. The examination focuses on practical interpretations and action descriptions given by the members of three major Finnish business organizations. The empirical data was collected during a two-year period in the Finnish Post Corporation, the Finnish branch of Vattenfal Group, one of the leading European energy companies, and the Mehiläinen Group, the leading private medical service provider in Finland. It includes 154 non-structured thematic interviews and 309 biographies concentrating on personal experiences of change. All positions and organizational levels were represented. The analysis was conducted using the grounded theory method introduced by Straus and Corbin in three sequential phases, including open, axial and selective coding processes. As a result, there is a hierarchical structure of categories, which is summarized in the process model of change behaviour patterns. Key ingredients are past experiences and future expectations which lead to different change relations and behavioural roles. Ultimately, they contribute to strategic and tactical choices realized as both public and hidden forms of action. The same forms of action can be used in both supporting and resisting change, and there are no specific dividing lines either between employer and employee roles or between different hierarchical positions. In general, however, it is possible to conclude that strategic choices lead more often to public forms of action, whereas tactical choices result in hidden forms. The primary goal of the study was to provide knowledge which has practical applications in everyday business life, HR and change management. The results, therefore, are highly applicable to other organizations as well as to less change-dominated situations, whenever power relations and conflicting interests are present. A sociological thesis on classical business management issues can be of considerable value in revealing the crucial social processes behind behavioural patterns. Keywords: change management, organizational development, organizational resistance, resistance to change, change management, labor relations, organization, leadership

Työkykyarviokokous moniammatillisen työryhmän päätöksentekotilanteena : Tutkimus vuorovaikutuksesta ja potilaan osallisuudesta

Work capacity assessment meeting as a decision-making situation of a multi-professional team a study on interaction and patient participation Multi-professional working has become an increasingly popular method of work in social and health care. The introduction of the viewpoints of several professionals is seen as a way to enhance the openness and quality of decision-making. However, so far relatively few study results are available on the implementation of this method in actual operations. This study examines one work method, a work capacity assessment meeting, along with medical certificates B and their enclosures written by the doctor to the patient after a meeting. After the theoretical and methodological chapter, providing background information, the study describes the structure of the meeting and the medical certificate as a constructive factor. This is followed by a discussion on the manner of assessing the various domains of the patient s functional capacity and the decision-making based on the assessed factors. Next, the study moves on to examine the effect of patient involvements on the conclusions and decisions that professionals make at the meeting. In conclusion, the study looks into how the voices of the professionals and the customer are transferred to the medical certificate. The material of the study consists of 11 meetings recorded on video, of which eight are work capacity assessment meetings and three are rehabilitation examination meetings. The first type of meeting is attended by a patient and a number of professionals, while the latter is attended only by the professionals. All the patients, whose cases are discussed in the work capacity assessment meetings, have a musculoskeletal disorder, while the rehabilitation meetings are related to patients who all also have some additional problem. The study material also consists of seven medical certificates B, written after a work capacity assessment meeting. For the most part, the material has been collected by the conversation analysis method. Moreover, also discourse analysis and a rhetorical approach were used. By using conversation analysis, it is possible to study closely how interaction is built up at the meeting and to examine how the actors implement their institutional assessment tasks in a co-operation that takes its form turn by turn. The four main findings of the study are as follows: firstly, the meeting is structured to a great extent on the basis of the medical certificate form to various phases of the meeting and the headings of the certificate are seen as communicative affordances at the meeting, directed primarily to the professionals that have assessed the patient s work capacity with various tests. The medical certificate is the ethno-method of the doctor acting as the chairman of the meeting that functions in two directions: it constructs the meeting and constitutes the task of the professionals as they produce contents for it. Secondly, the study describes the ways that are used to assess the different domains of the patient s work capacity, how they are described at the meeting and how a decision is taken when the assessment information has been saturated in the opinion of the team. Thirdly, the study brings up ways, with which the patient can influence the conclusions and decisions made by the professionals at the meeting. The study showed that the patient can affect the preconditions of his or her own future and wellbeing. Fourthly, the study describes how the wealth of expressions at the meeting is transferred to the certificate as an argumentative micro-cosmos, where the patient is classified to be recommended for rehabilitation or disability pension. An important finding is also how objective and subjective information and the voices of actors at the meeting are transferred to the statement in a strategic and intentional manner, with an orientation to the decision that will be taken at the insurance institution. The study results can be utilized in the training of professionals and in developing the operations of organisations performing the assessment of the work capacity of people suffering from musculoskeletal disorders.

Trust and Collectives

"Trust and Collectives" is a compilation of articles: (I) "On Rational Trust" (in Meggle, G. (ed.) Social Facts & Collective Intentionality, Dr. Hänsel-Hohenhausen AG (currently Ontos), 2002), (II) "Simulating Rational Social Normative Trust, Predictive Trust, and Predictive Reliance Between Agents" (M.Tuomela and S. Hofmann, Ethics and Information Technology 5, 2003), (III) "A Collective's Trust in a Collective's action" (Protosociology, 18-19, 2003), and (IV) "Cooperation and Trust in Group Contexts" (R. Tuomela and M.Tuomela, Mind and Society 4/1, 2005 ). The articles are tied together by an introduction that dwells deeply on the topic of trust. (I) presents a somewhat general version of (RSNTR) and some basic arguments. (II) offers an application of (RSNTR) for a computer simulation of trust.(III) applies (RSNTR) to Raimo Tuomela's "we-mode"collectives (i.e. The Philosophy of Social Practices, Cambridge University Press, 2002). (IV) analyzes cooperation and trust in the context of acting as a member of a collective. Thus, (IV) elaborates on the topic of collective agency in (III) and puts the trust account (RSNTR) to work in a framework of cooperation. The central aim of this work is to construct a well-argued conceptual and theoretical account of rational trust, viz. a person's subjectively rational trust in another person vis-à-vis his performance of an action, seen from a first-person point of view. The main method is conceptual and theoretical analysis understood along the lines of reflective equilibrium. The account of rational social normative trust (RSNTR), which is argued and defended against other views, is the result of the quest. The introduction stands on its own legs as an argued presentation of an analysis of the concept of rational trust and an analysis of trust itself (RSNTR). It is claimed that (RSNTR) is "genuine" trust and embedded in a relationship of mutual respect for the rights of the other party. This relationship is the growing site for trust, a causal and conceptual ground, but it is not taken as a reason for trusting (viz. predictive "trust"). Relevant themes such as risk, decision, rationality, control, and cooperation are discussed and the topics of the articles are briefly presented. In this work it is argued that genuine trust is to be kept apart from predictive "trust." When we trust a person vis-à-vis his future action that concerns ourselves on the basis of his personal traits and/or features of the specific situation we have a prediction-like attitude. Genuine trust develops in a relationship of mutual respect for the mutual rights of the other party. Such a relationship is formed through interaction where the parties gradually find harmony concerning "the rules of the game." The trust account stands as a contribution to philosophical research on central social notions and it could be used as a theoretical model in social psychology, economical and political science where interaction between persons and groups are in focus. The analysis could also serve as a model for a trust component in computer simulation of human action. In the context of everyday life the account clarifies the difference between predictive "trust" and genuine trust. There are no fast shortcuts to trust. Experiences of mutual respect for mutual rights cannot be had unless there is respect.

Search for the Higgs boson produced in association with Z→ℓ+ℓ- using the matrix element method at CDF II

We present a search for associated production of the standard model (SM) Higgs boson and a $Z$ boson where the $Z$ boson decays to two leptons and the Higgs decays to a pair of $b$ quarks in $p\bar{p}$ collisions at the Fermilab Tevatron. We use event probabilities based on SM matrix elements to construct a likelihood function of the Higgs content of the data sample. In a CDF data sample corresponding to an integrated luminosity of 2.7 fb$^{-1}$ we see no evidence of a Higgs boson with a mass between 100 GeV$/c^2$ and 150 GeV$/c^2$. We set 95% confidence level (C.L.) upper limits on the cross-section for $ZH$ production as a function of the Higgs boson mass $m_H$; the limit is 8.2 times the SM prediction at $m_H = 115$ GeV$/c^2$.

Top Quark Mass Measurement in the lepton+jets Channel Using a Matrix Element Method and in situ Jet Energy Calibration

A precision measurement of the top quark mass m_t is obtained using a sample of ttbar events from ppbar collisions at the Fermilab Tevatron with the CDF II detector. Selected events require an electron or muon, large missing transverse energy, and exactly four high-energy jets, at least one of which is tagged as coming from a b quark. A likelihood is calculated using a matrix element method with quasi-Monte Carlo integration taking into account finite detector resolution and jet mass effects. The event likelihood is a function of m_t and a parameter DJES to calibrate the jet energy scale /in situ/. Using a total of 1087 events, a value of m_t = 173.0 +/- 1.2 GeV/c^2 is measured.

Top quark mass measurement in the lepton plus jets channel using a modified matrix element method

We report a measurement of the top quark mass, m_t, obtained from ppbar collisions at sqrt(s) = 1.96 TeV at the Fermilab Tevatron using the CDF II detector. We analyze a sample corresponding to an integrated luminosity of 1.9 fb^-1. We select events with an electron or muon, large missing transverse energy, and exactly four high-energy jets in the central region of the detector, at least one of which is tagged as coming from a b quark. We calculate a signal likelihood using a matrix element integration method, with effective propagators to take into account assumptions on event kinematics. Our event likelihood is a function of m_t and a parameter JES that determines /in situ/ the calibration of the jet energies. We use a neural network discriminant to distinguish signal from background events. We also apply a cut on the peak value of each event likelihood curve to reduce the contribution of background and badly reconstructed events. Using the 318 events that pass all selection criteria, we find m_t = 172.7 +/- 1.8 (stat. + JES) +/- 1.2 (syst.) GeV/c^2.

Measurement of the top quark mass at CDF using the “neutrino ϕ weighting” template method on a lepton plus isolated track sample

We present a measurement of the top quark mass with t-tbar dilepton events produced in p-pbar collisions at the Fermilab Tevatron $\sqrt{s}$=1.96 TeV and collected by the CDF II detector. A sample of 328 events with a charged electron or muon and an isolated track, corresponding to an integrated luminosity of 2.9 fb$^{-1}$, are selected as t-tbar candidates. To account for the unconstrained event kinematics, we scan over the phase space of the azimuthal angles ($\phi_{\nu_1},\phi_{\nu_2}$) of neutrinos and reconstruct the top quark mass for each $\phi_{\nu_1},\phi_{\nu_2}$ pair by minimizing a $\chi^2$ function in the t-tbar dilepton hypothesis. We assign $\chi^2$-dependent weights to the solutions in order to build a preferred mass for each event. Preferred mass distributions (templates) are built from simulated t-tbar and background events, and parameterized in order to provide continuous probability density functions. A likelihood fit to the mass distribution in data as a weighted sum of signal and background probability density functions gives a top quark mass of $165.5^{+{3.4}}_{-{3.3}}$(stat.)$\pm 3.1$(syst.) GeV/$c^2$.

New Method for Delexicalization and its Application to Prosodic Tagging for Text-to-Speech Synthesis

This paper describes a new flexible delexicalization method based on glottal excited parametric speech synthesis scheme. The system utilizes inverse filtered glottal flow and all-pole modelling of the vocal tract. The method provides a possibil- ity to retain and manipulate all relevant prosodic features of any kind of speech. Most importantly, the features include voice quality, which has not been properly modeled in earlier delex- icalization methods. The functionality of the new method was tested in a prosodic tagging experiment aimed at providing word prominence data for a text-to-speech synthesis system. The ex- periment confirmed the usefulness of the method and further corroborated earlier evidence that linguistic factors influence the perception of prosodic prominence.