Non-small cell lung cancer : studies on pathogenesis, tumour targeting and treatment outcomes

Lung cancer accounts for more cancer-related deaths than any other cancer. In Finland, five-year survival ranges from 8% to 13%. The main risk factor for lung cancer is long-term cigarette smoking, but its carcinogenesis requires several other factors. The aim of the present study was to 1) evaluate post-operative quality of life, 2) compare clinical outcomes between minimally invasive and conventional open surgery, 3) evaluate the role of oxidative stress in the carcinogenesis of non-small lung cancer (NSCLC), and 4) to identify and characterise targeted agents for therapeutic and diagnostic use in surgery. For study I, pneumonectomy patients replied to 15D quality of life and baseline dyspnea questionnaires. Study III involved a prospective quality of life assessment using the 15D questionnaire after lobectomy or bi-lobectomy. Study IV was a retrospective comparison of clinical outcomes between 212 patients treated with open thoracotomy and 116 patients who underwent a minimally invasive technique. Study II measured parameters of oxidative metabolism (myeloperoxidase activity, glutathione content and NADPH oxidase activity) and DNA adducts. Study V employed the phage display method and identified a core motif for homing peptides. This method served in cell-binding, cell-localisation, and biodistribution studies. Following both pneumonectomy and lobectomy, NSCLC patients showed significantly decreased long-term quality of life. No significant correlation was noted between post-operative quality of life and pre-operative pulmonary function tests. Women suffered more from increased dyspnea after pneumonectomy which was absent after lobectomy or bi-lobectomy. Patients treated with video-assisted thoracoscopy showed significantly decreased morbidity and shorter periods of hospitalization than did open surgery patients. This improvement was achieved even though the VATS patients were older and suffered more comorbid conditions and poorer pulmonary function. No significant differences in survival were noted between these two groups. An increase in NADPH oxidase activity was noted in tumour samples of both adenocarcinoma and squamous cell carcinoma. This increase was independent from myeloperoxidase activity. Elevated glutathione content was noted in tumour tissue, especially in adenocarcinoma. After panning the clinical tumour samples with the phage display method, an amino acid sequence of ARRPKLD, the Thx, was chosen for further analysis. This method proved selective of tumour tissue in both in vitro and in vivo cell-binding assay, and biodistribution showed tumour accumulation. Because of the significantly reduced quality of life following pneumonectomy, other operative strategies should be implemented as an alternative (e.g. sleeve-lobectomy). To treat this disease, implementation of a minimally invasive surgical technique is safe, and the results showed decreased morbidity and a shorter period of hospitalisation than with thoracotomy. This technique may facilitate operative treatment of elderly patients with comorbid conditions who might otherwise be considered inoperable. Simultaneous exposure to oxidative stress and altered redox states indicates the important role of oxidative stress in the pathogenesis and malignant transformation of NSCLC. The studies showed with great specificity and with favourable biodistribution that Thx peptide is specific to NSCLC tumours. Thx thus shows promise in imaging, targeted therapy, and monitoring of treatment response.

Irradiation effects in graphene and related materials

Nanomaterials with a hexagonally ordered atomic structure, e.g., graphene, carbon and boron nitride nanotubes, and white graphene (a monolayer of hexagonal boron nitride) possess many impressive properties. For example, the mechanical stiffness and strength of these materials are unprecedented. Also, the extraordinary electronic properties of graphene and carbon nanotubes suggest that these materials may serve as building blocks of next generation electronics. However, the properties of pristine materials are not always what is needed in applications, but careful manipulation of their atomic structure, e.g., via particle irradiation can be used to tailor the properties. On the other hand, inadvertently introduced defects can deteriorate the useful properties of these materials in radiation hostile environments, such as outer space. In this thesis, defect production via energetic particle bombardment in the aforementioned materials is investigated. The effects of ion irradiation on multi-walled carbon and boron nitride nanotubes are studied experimentally by first conducting controlled irradiation treatments of the samples using an ion accelerator and subsequently characterizing the induced changes by transmission electron microscopy and Raman spectroscopy. The usefulness of the characterization methods is critically evaluated and a damage grading scale is proposed, based on transmission electron microscopy images. Theoretical predictions are made on defect production in graphene and white graphene under particle bombardment. A stochastic model based on first-principles molecular dynamics simulations is used together with electron irradiation experiments for understanding the formation of peculiar triangular defect structures in white graphene. An extensive set of classical molecular dynamics simulations is conducted, in order to study defect production under ion irradiation in graphene and white graphene. In the experimental studies the response of carbon and boron nitride multi-walled nanotubes to irradiation with a wide range of ion types, energies and fluences is explored. The stabilities of these structures under ion irradiation are investigated, as well as the issue of how the mechanism of energy transfer affects the irradiation-induced damage. An irradiation fluence of 5.5x10^15 ions/cm^2 with 40 keV Ar+ ions is established to be sufficient to amorphize a multi-walled nanotube. In the case of 350 keV He+ ion irradiation, where most of the energy transfer happens through inelastic collisions between the ion and the target electrons, an irradiation fluence of 1.4x10^17 ions/cm^2 heavily damages carbon nanotubes, whereas a larger irradiation fluence of 1.2x10^18 ions/cm^2 leaves a boron nitride nanotube in much better condition, indicating that carbon nanotubes might be more susceptible to damage via electronic excitations than their boron nitride counterparts. An elevated temperature was discovered to considerably reduce the accumulated damage created by energetic ions in both carbon and boron nitride nanotubes, attributed to enhanced defect mobility and efficient recombination at high temperatures. Additionally, cobalt nanorods encapsulated inside multi-walled carbon nanotubes were observed to transform into spherical nanoparticles after ion irradiation at an elevated temperature, which can be explained by the inverse Ostwald ripening effect. The simulation studies on ion irradiation of the hexagonal monolayers yielded quantitative estimates on types and abundances of defects produced within a large range of irradiation parameters. He, Ne, Ar, Kr, Xe, and Ga ions were considered in the simulations with kinetic energies ranging from 35 eV to 10 MeV, and the role of the angle of incidence of the ions was studied in detail. A stochastic model was developed for utilizing the large amount of data produced by the molecular dynamics simulations. It was discovered that a high degree of selectivity over the types and abundances of defects can be achieved by carefully selecting the irradiation parameters, which can be of great use when precise pattering of graphene or white graphene using focused ion beams is planned.

Paganism, Traditionalism, Nationalism : Narratives of Russian Rodnoverie

The topic of this dissertation is Rodnoverie, a religion that revives pre-Christian Slavic spirituality. Rodnoverie has been noted to be one of the fastest growing new religions in Russia and the aim of the study is to analyse why and how the movement has attained its popularity. First, the analysis asks how Rodnovers themselves explain the revival of ancient Paganism at this particular historical moment. Secondly, these interpretations are reflected in the framework of sociological discussions about contemporary religiosity. The analysis discusses how the Rodnoverie movement corresponds to some tendencies that are considered to characterise late modern religiosity. The primary material of the research is Rodnoverie texts: books, newspapers and electronic articles. The published literature is supplemented by fieldwork material which includes interviews with some Rodnoverie leaders and the author s participant observation of rituals and gatherings. Methodologically, the study draws on a sociological narrative approach that is focused on examining how individuals and groups use narratives to construct their identities and to challenge mainstream discussions and interpretations. The analysis discerns three narratives. The first one of these portrays Rodnoverie as a revival of the native Russian or Slavic religion. The narrative provides a new version of the old Slavophile idea, according to which imitation of the West has misguided Russia and, therefore, Russians should turn to their own tradition. In the second narrative, Rodnoverie is presented as a nature religion that features tolerance and pluralistic values. According to these perceptions, the emergence of Rodnoverie marks the dead-end of the earlier hegemonic universalistic world-views, the mono-ideologies . While the nationalist narrative focuses on Russia s national heritage, the third narrative interprets the tradition in more universal terms as an alternative to modern values and way of life. The main argument of this narrative is that contemporary people have become alienated from nature, their roots and their community. The themes that are discussed in the theoretical literature on late modern religiosity often configure in Rodnovers interpretations either directly or when looked at through an analytical framework. Of the various themes that are addressed in a sociological study of religion the ones that have most relevance for Rodnoverie are the discussions on individualisation, globalisation and secularisation. Rodnoverie reflects such tendencies as the subjectivisation of religion and the modern crisis of authority. The movement also both exemplifies and actively promotes religious pluralisation in Russia.

Root system traits of Norway spruce, Scots pine, and silver birch in mixed boreal forests: an analysis of root architecture, morphology, and anatomy

The aim of this thesis was to unravel the functional-structural characteristics of root systems of Betula pendula Roth., Picea abies (L.) Karst., and Pinus sylvestris L. in mixed boreal forest stands differing in their developmental stage and site fertility. The root systems of these species had similar structural regularities: horizontally-oriented shallow roots defined the horizontal area of influence, and within this area, each species placed fine roots in the uppermost soil layers, while sinker roots defined the maximum rooting depth. Large radial spread and high ramification of coarse roots, and the high specific root length (SRL) and root length density (RLD) of fine roots indicated the high belowground competitiveness and root plasticity of B. pendula. Smaller radial root spread and sparser branching of coarse roots, and low SRL and RLD of fine roots of the conifers could indicate their more conservative resource use and high association with and dependence on ectomycorrhiza-forming fungi. The vertical fine root distributions of the species were mostly overlapping, implying the possibility for intense belowground competition for nutrients. In each species, conduits tapered and their frequency increased from distal roots to the stem, from the stem to the branches, and to leaf petioles in B. pendula. Conduit tapering was organ-specific in each species violating the assumptions of the general vascular scaling model (WBE). This reflects the hierarchical organization of a tree and differences between organs in the relative importance of transport, safety, and mechanical demands. The applied root model was capable of depicting the mass, length and spread of coarse roots of B. pendula and P. abies, and to the lesser extent in P. sylvestris. The roots did not follow self-similar fractal branching, because the parameter values varied within the root systems. Model parameters indicate differences in rooting behavior, and therefore different ecophysiological adaptations between species.

Methods and tools for mass spectrometric lipidome analysis

The analysis of lipid compositions from biological samples has become increasingly important. Lipids have a role in cardiovascular disease, metabolic syndrome and diabetes. They also participate in cellular processes such as signalling, inflammatory response, aging and apoptosis. Also, the mechanisms of regulation of cell membrane lipid compositions are poorly understood, partially because a lack of good analytical methods. Mass spectrometry has opened up new possibilities for lipid analysis due to its high resolving power, sensitivity and the possibility to do structural identification by fragment analysis. The introduction of Electrospray ionization (ESI) and the advances in instrumentation revolutionized the analysis of lipid compositions. ESI is a soft ionization method, i.e. it avoids unwanted fragmentation the lipids. Mass spectrometric analysis of lipid compositions is complicated by incomplete separation of the signals, the differences in the instrument response of different lipids and the large amount of data generated by the measurements. These factors necessitate the use of computer software for the analysis of the data. The topic of the thesis is the development of methods for mass spectrometric analysis of lipids. The work includes both computational and experimental aspects of lipid analysis. The first article explores the practical aspects of quantitative mass spectrometric analysis of complex lipid samples and describes how the properties of phospholipids and their concentration affect the response of the mass spectrometer. The second article describes a new algorithm for computing the theoretical mass spectrometric peak distribution, given the elemental isotope composition and the molecular formula of a compound. The third article introduces programs aimed specifically for the analysis of complex lipid samples and discusses different computational methods for separating the overlapping mass spectrometric peaks of closely related lipids. The fourth article applies the methods developed by simultaneously measuring the progress curve of enzymatic hydrolysis for a large number of phospholipids, which are used to determine the substrate specificity of various A-type phospholipases. The data provides evidence that the substrate efflux from bilayer is the key determining factor for the rate of hydrolysis.

Systems between information and knowledge : In a memory management model of an extended enterprise

The research question of this thesis was how knowledge can be managed with information systems. Information systems can support but not replace knowledge management. Systems can mainly store epistemic organisational knowledge included in content, and process data and information. Certain value can be achieved by adding communication technology to systems. All communication, however, can not be managed. A new layer between communication and manageable information was named as knowformation. Knowledge management literature was surveyed, together with information species from philosophy, physics, communication theory, and information system science. Positivism, post-positivism, and critical theory were studied, but knowformation in extended organisational memory seemed to be socially constructed. A memory management model of an extended enterprise (M3.exe) and knowformation concept were findings from iterative case studies, covering data, information and knowledge management systems. The cases varied from groups towards extended organisation. Systems were investigated, and administrators, users (knowledge workers) and managers interviewed. The model building required alternative sets of data, information and knowledge, instead of using the traditional pyramid. Also the explicit-tacit dichotomy was reconsidered. As human knowledge is the final aim of all data and information in the systems, the distinction between management of information vs. management of people was harmonised. Information systems were classified as the core of organisational memory. The content of the systems is in practice between communication and presentation. Firstly, the epistemic criterion of knowledge is not required neither in the knowledge management literature, nor from the content of the systems. Secondly, systems deal mostly with containers, and the knowledge management literature with applied knowledge. Also the construction of reality based on the system content and communication supports the knowformation concept. Knowformation belongs to memory management model of an extended enterprise (M3.exe) that is divided into horizontal and vertical key dimensions. Vertically, processes deal with content that can be managed, whereas communication can be supported, mainly by infrastructure. Horizontally, the right hand side of the model contains systems, and the left hand side content, which should be independent from each other. A strategy based on the model was defined.

New computational approaches for inelastic x-ray scattering

Inelastic x-ray scattering spectroscopy is a versatile experimental technique for probing the electronic structure of materials. It provides a wealth of information on the sample's atomic-scale structure, but extracting this information from the experimental data can be challenging because there is no direct relation between the structure and the measured spectrum. Theoretical calculations can bridge this gap by explaining the structural origins of the spectral features. Reliable methods for modeling inelastic x-ray scattering require accurate electronic structure calculations. This work presents the development and implementation of new schemes for modeling the inelastic scattering of x-rays from non-periodic systems. The methods are based on density functional theory and are applicable for a wide variety of molecular materials. Applications are presented in this work for amorphous silicon monoxide and several gas phase systems. Valuable new information on their structure and properties could be extracted with the combination of experimental and computational methods.

Välineestä vuorovaikutukseen: Teknologian käyttötapojen kytkökset tuottavuusparadoksiin

Tämän tutkielman alaotsikossa mainittu tuottavuusparadoksi viittaa Robert Solowin esittämään lausuntoon, jonka mukaan tietotekniikan yleistyminen on tuonut mukanaan suurista toiveista huolimatta jopa aikaisempaa hitaampaa tuottavuuden kasvua. Ilmiön mahdolliseksi syyksi on esitetty muun muassa sitä, että uudenlaisten prosessien, rakenteiden tai toimintatapojen syntymiseen vaadittavan sosiaalisen ja inhimillisen pääoman kehittyminen on hidasta. Tämänkaltaisen pääoman rakentumiseen on kulunut vuosia, ennen kuin tietotekniikkainvestoinneilla on alettu saavuttaa merkittävää positiivista tuottavuusvaikutusta. Aiemman kirjallisuuden pohjalta on osoitettavissa, että mikäli työntekijöiden koulutukseen, muutoksiin johtamisessa ja työn organisoinnissa ei panosteta, tietotekniikan käyttöönotto vaikuttaa negatiivisesti tuottavuuden kasvuun. Tutkielman pyrkimys on jäljittää tuottavuusparadoksin yhteyksiä teknologian ja ihmisen vuorovaikutukseen. Kiinnostuksen kohteena ovat erityisesti vanhojen rutiinien, tulkintojen ja normien seurauksena syntyvät, suunnitellusta poikkeavat käyttötavat. Vakiintuneet työtavat elävät sitkeästi myös uuden teknologian käyttöönoton jälkeisissä työprosesseissa ja voivat olla jopa tuhoisia tavoitellun hyödyn kannalta. Carlota Perezin pitkien aaltojen tutkimustraditioon pohjautuen voidaan väittää, että informaatiotekniikan ja televiestinnän aika on vasta saavuttamassa synergiavaihetta, jossa työn organisaatiomuodot ja taloudelliset instituutiot muotoutuvat vastaamaan ja tukemaan uuden tuotannon ja teknologian hyödyntämistä. Teoreettinen kehys rakentuu näiden oletusten mukaisesti, hyödyntäen Wanda Orlikowskin teknologian rakenteistumisteoriaa ja antaen tilaa toiminnan ja rakenteen väliselle vuorovaikutukselle. Työn aineisto koostuu kahdesta case-tutkimuksesta, joille yhteistä on pyrkimys ajanhallintaan teknologian avulla. Ensimmäinen aineistopaketti on peräisin viestintäalan yrityksessä toteutetusta, työvuorojen varausprosessia muuttaneesta tietojärjestelmäuudistuksesta. Toinen aineistoluku pohjautuu Pohjois-Karjalan keskussairaalassa Joensuussa toteutettuun kutsuviestipalvelun kehityshankkeeseen. Kahden käyttöönottotutkimuksen tavoitteena oli dokumentoida kehitysprojektien läpivienti eri näkökulmista ja tuoda näkyville niitä eri vaiheissa esiintyviä ristiriitoja ja jännitteitä, jotka omalta osaltaan vaikuttavat lopputulokseen. Haastatteluaineiston käsittelyllä pyritään havainnollistamaan projektien etenemisen aikana havaittuja ongelmia ja samalla tuomaan tiedon lähteet avoimesti esille. Koko tutkielman läpi kantava ydinajatus on, että normien, tapojen ja muiden sosiaalista elämää määrittävien säännönmukaisuuksien kokonaisuuden liikkeelle sysääminen on usein jopa tärkeämpää kuin varsinaiset teknologiset ominaisuudet. Tietotekniikan aiheuttamat vaikutukset suuntaan tai toiseen ovat suurimmillaan silloin, kun ne muokkaavat sosiaalista todellisuutta radikaalisti. Tähän mennessä tietotekniikkaa on käytetty pääasiassa helpottamaan vanhoja työskentelytapoja, mutta kun teknologiset apuvälineet alkavat olla yhä useamman saavutettavissa ja niiden vaatimat resurssit käyvät halvemmiksi, voivat tietotekniikan tuomat suurimmat muutokset olla vielä edessä. Tutkielman löydökset asettuvat tukemaan väitettä, jonka mukaan tuottavuuden kehityksessä ei-tekniset innovaatiot ovat edellytyksinä teknisten innovaatioiden menestykselle.

Sikainfluenssan epidemiologia Suomen näkökulmasta

Kirjallisuuskatsauksen aihe on ajankohtainen Suomessa ja muualla maailmassa. Sikainfluenssa on sikojen tarttuva hengitystiesairaus, jonka aiheuttaja on herkästi kärsäkontaktissa leviävä influenssa A – virus. Siat sairastuvat usein yllättäen ja samanaikaisesti. Sikainfluenssa voi olla oireeton tai vähäoireinen, mikä hankaloittaa taudin havaitsemista. Sikainfluenssa aiheuttaa sikatiloille tuotantotappioita ja sioille hyvinvointiongelmia. Sikainfluenssa on maailmalla yleinen sikojen hengitystiesairaus. Suomi oli sikainfluenssasta vapaa maa vuoteen 2007 saakka ja vuonna 2009 noin kolmasosa suomalaisista sikaloista oli seropositiivisia sikainfluenssan suhteen. Influenssa A – viruksia esiintyy yleisesti eläimillä ja ihmisillä. Influenssa A – virusten kantajia luonnossa ovat vesilinnut, jotka levittävät influenssaviruksia ulosteissaan. Influenssa A – virukset pystyvät muuntumaan uusiksi alatyypeiksi ja sikaa pidetään eläinlajina, jossa influenssa A – virukset muuntuvat lajista toiseen tarttuviksi. Sikainfluenssa on zoonoosi. Sikainfluenssaviruksia on useita eri alatyyppejä. Maailmalla esiintyvien sikainfluenssavirusten alkuperä ja ominaisuudet vaihtelevat maantieteellisen sijainnin mukaan. Euroopassa, Pohjois-Amerikassa ja Aasiassa nykyään esiintyvät sikainfluenssavirukset ovat kehittyessään eriytyneet geneettisesti ja antigeenisesti toisistaan. Sikapopulaatioissa kiertää yleensä useita eri sikainfluenssavirustyyppejä yhtä aikaa. Tärkeimpiä ja useimmiten eristettyjä sikainfluenssavirusten alatyyppejä ovat H1N1, H1N2 ja H3N2. Sikainfluenssan diagnosointi on tärkeää, jotta virusten leviämistä voidaan ehkäistä ja tautitilanne pysyy ajantasaisena. Sikainfluenssa diagnosoidaan osoittamalla sikainfluenssavirus 1-3 vuorokautta kliinisten oireiden alkamisen jälkeen otetuista virusnäytteistä tai virusvasta-aineet serologisin testein pariseeruminäytteistä. Viruksen osoitusmenetelmät (viruseristys ja RT-PCR) ovat luotettavia ja niillä sikainfluenssavirukset voidaan tyypittää. Serologisten testien (hemagglutinaation inhibitio ja ELISA) luotettavuudessa on puutteita ja etenkin ELISA-testien luotettavuus perustuu tietoon sikapopulaatiossa liikkuvien sikainfluenssavirusten alatyypeistä. Sikainfluenssan jatkuva ja tehokas tautiseuranta on oleellista, jotta serologiset testit saadaan optimoitua. Alueellisesti sikainfluenssan esiintyvyyttä lisäävät suuri sikatiheys, tilojen lyhyet välimatkat, eläinkuljetukset sekä sikojen kontaktit ulkopuolisiin henkilöihin ja tavaroihin. Sikalan bioturvallisuus on tärkein tekijä estettäessä sikainfluenssavirusten pääsy sikalaan. Sikainfluenssan vastustaminen on tärkeää, koska se on osa sikojen hengitystiesairauskompleksia sekä predisponoiva tekijä muiden sikapatogeenien aiheuttamille hengitystiesairauksille. Sikainfluenssan vastustuksessa voidaan suurilla sikatiloilla käyttää apuna kahta tai kolmea virustyyppiä sisältäviä rokotteita, jotka vähentävät sikainfluenssan kliinisiä oireita ja viruksen eritystä ympäristöön.

United We Stand - Divided We Fall : A Standard Model of Unit Cohesion

Research on unit cohesion has shown positive correlations between cohesion and valued outcomes such as strong performance, reduced stress, less indiscipline, and high re-enlistment intentions. However, the correlations have varied in strength and significance. The purpose of this study is to show that taking into consideration the multi-component nature of cohesion and relating the most applicable components to specific outcomes could resolve much of the inconsistency. Unit cohesion is understood as a process of social integration among members of a primary group with its leaders, and with the larger secondary groups of which they are a part. Correspondingly, included in the framework are four bonding components: horizontal (peer) and vertical (subordinate and leader) and organizational and institutional, respectively. The data were collected as part of a larger research project on cohesion, leadership, and personal adjustment to the military. In all, 1,534 conscripts responded to four questionnaires during their service in 2001-2002. In addition, sociometric questionnaires were given to 537 group members in 47 squads toward the end of their service. The results showed that platoons with strong primary-group cohesion differed from other platoons in terms of performance, training quality, secondary-group experiences, and attitudes toward refresher training. On the sociometric level it was found that soldiers who were chosen as friends by others were more likely to have higher expected performance, better performance ratings, more positive attitudes toward military service, higher levels of well-being during conscript service, and fewer exemptions from duty during it. On the group level, the selection of the respondents own group leader rather than naming a leader from outside (i.e., leader bonding) had a bearing not only on cohesion and performance, but also on the social, attitudinal, and behavioral criteria. Overall, the aim of the study was to contribute to the research on cohesion by introducing a model that takes into account the primary foci of bonding and their impact. The results imply that primary-group and secondary-group bonding processes are equally influential in explaining individual and group performance, whereas the secondary-group bonding components are far superior in explaining career intentions, personal growth, avoidance of duty, and attitudes toward refresher training and national defense. This should be considered in the planning and conducting of training. The main conclusion is that the different types of cohesion components have a unique, positive, significant, but varying impact on a wide range of criteria, confirming the need to match the components with the specific criteria.

Wood and fiber properties of Norway spruce and its suitability for thermomechanical pulping.

In the first part of the study, the selected wood and fiber properties were investigated in terms of their occurrence and variation in wood, as well as their relevance from the perspective of thermomechanical pulping process and related end-products. It was concluded that the most important factors were the fiber dimensions, juvenile wood content, and in some cases, the content of heartwood being associated with extremely dry wood with low permeability in spruce. With respect to the above properties, the following three pulpwood assortments of which pulping potential was assumed to vary were formed: wood from regeneration cuttings, first-thinnings wood, and sawmill chips. In the experimental part of the study the average wood and fiber characteristics and their variation were determined for each raw material group prior to pulping. Subsequently, each assortment - equaling about 1500 m3 roundwood - was pulped separately for a 24 h period, at constant process conditions. The properties of obtained newsgrade thermomechanical pulps were then determined. Thermomechanical pulping (TMP) from sawmill chips had the highest proportion of long fibers, smallest proportion of fines, and had generally the coarsest and longest fibers. TMP from first-thinnings wood was just the opposite, whereas that from regeneration cuttings fell in between the above two extremes. High proportion of dry heartwood in wood originating from regeneration cuttings produced a slightly elevated shives content. However, no differences were found in pulp specific energy consumption. The obtained pulp tear index was clearly best in TMP made from sawmill chips and poorest in pulp from first-thinnings wood, which had generally inferior strength properties. No dramatical differences in any of the strength properties were found between pulp from sawmill residual wood and regeneration cuttings. Pulp optical properties were superior in TMP from first-thinnings. Unexpectedly, no noticeable differences, which could be explained with fiber morphology, were found in sheet density, bulk, air permeance or roughness between the three pulps. The most important wood quality factors in this study were the fiber length, fiber cross-sectional dimensions and percentage juvenile wood. Differences found in the quality of TMP manufactured from the above spruce assortments suggest that they could be segregated and pulped separately to obtain specific product characteristics, i.e., for instance tailor-made end-products, and to minimize unnecessary variation in the raw material quality, and hence, pulp quality.

Eläkejärjestelmät ja maahanmuutto : poliittisen taloustieteen lähestymistapa

Tässä työssä kysymystä kouluttamattoman maahanmuuton mahdollisesta vaikutuksesta eläkkeiden rahoitettavuuteen ja sitä kautta maahanmuuttopolitiikkaan lähestytään poliittisen taloustieteen näkökulmasta. Tarkastellaan siis sitä, mitkä ikä- ja tuloryhmät hyötyvät kouluttamattomasta maahanmuutosta sen mahdollisesti helpottaessa eläkkeiden maksua ja mitkä eivät ja millaiseen poliittiseen tasapainoon tämä johtaa. Äänestettäessä maahanmuuttopolitiikasta yksilö perustaisi mielipiteensä maahanmuuttopolitiikan liberalisoinnista tai tiukentamisesta siihen, miten maahanmuutto vaikuttaisi hänen omaan etuunsa. Maan väestö jaetaan eläkeläisiin sekä koulutettuihin ja kouluttamattomiin työntekijöihin ja tarkastellaan miten maahanmuutto vaikuttaa näiden ryhmien taloudelliseen hyötyyn. Aluksi tarkastellaan lyhyesti millaisia malleja maahanmuutosta ja eläkejärjestelmän olemassaolon vaikutuksista siihen suhtautumiseen on olemassa. Ensimmäisen johdantoluvun jälkeen käsitellään sitä, miten äänestystulos maahanmuuttopolitiikasta muuttuu mallin oletusten muuttuessa. Työssä tarkastellaan Razinin ja Sadkan (1999) hyvin yksinkertaista mallia, joka sisältää yksinkertaisuutensa takia joitain hyvin rajoittavia oletuksia. Sitten käydään läpi Kriegerin (2004) sekä Razinin ja Sadkan (2000) tekemiä laajennuksia, joissa osasta rajoittavia oletuksia luovutaan ja katsotaan millaisiin muutoksiin tämä johtaa. Työssä tarkastellaan myös Kriegerin (2003) mallia äänestystuloksesta neljässä erilaisessa eläkejärjestelmässä. Tamuran (2006) mallia tarkastellaan näkökulman laajentamiseksi edelleen. Tarkastelun kohteena ei enää ole vain eläkejärjestelmä, vaan myös tulonsiirrot matalapalkka-alojen työntekijöille. Työssä tarkasteltujen artikkeleiden pohjalta näyttää siltä, että erilaisissa eläkejärjestelmissä ja erilaisissa talouksissa elävät yksilöt suhtautuvat maahanmuuttoon eri tavoin sen mukaan, minkä verran he saavat hyötyä siitä. Hyödyn määrään vaikuttavat myös maahanmuuttajien ominaisuudet ja eläkejärjestelmän ominaisuudet, varsinkin se, onko eläkemaksu vai eläke-etuus vakio. Koska maahanmuutto vaikuttaa talouden eri ryhmiin eli kouluttamattomiin ja koulutettuihin työntekijöihin sekä eläkeläisiin eri tavoin, useimmiten yksimielisyyttä maahanmuuttopolitiikasta ei synny.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.

Nanoscale studies of materials using x-ray synchrotron radiation and mesoscopic modelling

X-ray synchrotron radiation was used to study the nanostructure of cellulose in Norway spruce stem wood and powders of cobalt nanoparticles in cellulose support. Furthermore, the growth of metallic clusters was modelled and simulated in the mesoscopic size scale. Norway spruce was characterized with x-ray microanalysis at beamline ID18F of the European Synchrotron Radiation Facility in Grenoble. The average dimensions and the orientation of cellulose crystallites was determined using x-ray microdiffraction. In addition, the nutrient element content was determined using x-ray fluorescence spectroscopy. Diffraction patterns and fluorescence spectra were simultaneously acquired. Cobalt nanoparticles in cellulose support were characterized with x-ray absorption spectroscopy at beamline X1 of the Deutsches Elektronen-Synchrotron in Hamburg, complemented by home lab experiments including x-ray diffraction, electron microscopy and measurement of magnetic properties with a vibrating sample magnetometer. Extended x-ray absorption fine structure spectroscopy (EXAFS) and x-ray diffraction were used to solve the atomic arrangement of the cobalt nanoparticles. Scanning- and transmission electron microscopy were used to image the surfaces of the cellulose fibrils, where the growth of nanoparticles takes place. The EXAFS experiment was complemented by computational coordination number calculations on ideal spherical nanocrystals. The growth process of metallic nanoclusters on cellulose matrix is assumed to be rather complicated, affected not only by the properties of the clusters themselves, but essentially depending on the cluster-fiber interfaces as well as the morphology of the fiber surfaces. The final favored average size for nanoclusters, if such exists, is most probably a consequence of these two competing tendencies towards size selection, one governed by pore sizes, the other by the cluster properties. In this thesis, a mesoscopic model for the growth of metallic nanoclusters on porous cellulose fiber (or inorganic) surfaces is developed. The first step in modelling was to evaluate the special case of how the growth proceeds on flat or wedged surfaces.

Berry phenolics: isolation, analysis, identification, and antioxidant properties

The main objectives in this thesis were to isolate and identify the phenolic compounds in wild (Sorbus aucuparia) and cultivated rowanberries, European cranberries (Vaccinium microcarpon), lingonberries (Vaccinium vitis-idaea), and cloudberries (Rubus chamaemorus), as well as to investigate the antioxidant activity of phenolics occurring in berries in food oxidation models. In addition, the storage stability of cloudberry ellagitannin isolate was studied. In wild and cultivated rowanberries, the main phenolic compounds were chlorogenic acids and neochlorogenic acids with increasing anthocyanin content depending on the crossing partners. The proanthocyanidin contents of cranberries and lingonberries were investigated, revealing that the lingonberry contained more rare A-type dimers than the European cranberry. The liquid chromatography mass spectrometry (LC-MS) analysis of cloudberry ellagitannins showed that trimeric lambertianin C and sanguiin H-10 were the main ellagitannins. The berries, rich in different types of phenolic compounds including hydroxycinnamic acids, proanthocyanidins, and ellagitannins, showed antioxidant activity toward lipid oxidation in liposome and emulsion oxidation models. All the different rowanberry cultivars prevented lipid oxidation in the same way, in spite of the differences in their phenolic composition. In terms of liposomes, rowanberries were slightly more effective antioxidants than cranberry and lingonberry phenolics. Greater differences were found when comparing proanthocyanidin fractions. Proanthocyanidin dimers and trimers of both cranberries and lingonberries were most potent in inhibiting lipid oxidation. Antioxidant activities and antiradical capacities were also studied with hydroxycinnamic acid glycosides. The sinapic acid derivatives of the hydroxycinnamic acid glycosides were the most effective at preventing lipid oxidation in emulsions and liposomes and scavenging radicals in DPPH assay. In liposomes and emulsions, the formation of the secondary oxidation product, hexanal, was inhibited more than that of the primary oxidation product, conjugated diene hydroperoxides, by hydroxycinnamic acid derivatives. This indicates that they are principally chain-breaking antioxidants rather than metal chelators, although they possess chelating activity as well. The storage stability test of cloudberry ellagitannins was performed by storing ellagitannin isolate and ellagitannins encapsulated with maltodextrin at different relative vapor pressures. The storage stability was enhanced by the encapsulation when higher molecular weight maltodextrin was used. The best preservation was achieved when the capsules were stored at 0 or 33% relative vapor pressures. In addition, the antioxidant activities of encapsulated cloudberry extracts were followed during the storage period. Different storage conditions did not alter the antioxidant activity, even though changes in the ellagitannin contents were seen. The current results may be of use in improving the oxidative stability of food products by using berries as natural antioxidants.