Analyzing changes in macro-level drivers of country-specific emissions : The role of consumption, technology and trade

Industrial ecology is an important field of sustainability science. It can be applied to study environmental problems in a policy relevant manner. Industrial ecology uses ecosystem analogy; it aims at closing the loop of materials and substances and at the same time reducing resource consumption and environmental emissions. Emissions from human activities are related to human interference in material cycles. Carbon (C), nitrogen (N) and phosphorus (P) are essential elements for all living organisms, but in excess have negative environmental impacts, such as climate change (CO2, CH4 N2O), acidification (NOx) and eutrophication (N, P). Several indirect macro-level drivers affect emissions change. Population and affluence (GDP/capita) often act as upward drivers for emissions. Technology, as emissions per service used, and consumption, as economic intensity of use, may act as drivers resulting in a reduction in emissions. In addition, the development of country-specific emissions is affected by international trade. The aim of this study was to analyse changes in emissions as affected by macro-level drivers in different European case studies. ImPACT decomposition analysis (IPAT identity) was applied as a method in papers I III. The macro-level perspective was applied to evaluate CO2 emission reduction targets (paper II) and the sharing of greenhouse gas emission reduction targets (paper IV) in the European Union (EU27) up to the year 2020. Data for the study were mainly gathered from official statistics. In all cases, the results were discussed from an environmental policy perspective. The development of nitrogen oxide (NOx) emissions was analysed in the Finnish energy sector during a long time period, 1950 2003 (paper I). Finnish emissions of NOx began to decrease in the 1980s as the progress in technology in terms of NOx/energy curbed the impact of the growth in affluence and population. Carbon dioxide (CO2) emissions related to energy use during 1993 2004 (paper II) were analysed by country and region within the European Union. Considering energy-based CO2 emissions in the European Union, dematerialization and decarbonisation did occur, but not sufficiently to offset population growth and the rapidly increasing affluence during 1993 2004. The development of nitrogen and phosphorus load from aquaculture in relation to salmonid consumption in Finland during 1980 2007 was examined, including international trade in the analysis (paper III). A regional environmental issue, eutrophication of the Baltic Sea, and a marginal, yet locally important source of nutrients was used as a case. Nutrient emissions from Finnish aquaculture decreased from the 1990s onwards: although population, affluence and salmonid consumption steadily increased, aquaculture technology improved and the relative share of imported salmonids increased. According to the sustainability challenge in industrial ecology, the environmental impact of the growing population size and affluence should be compensated by improvements in technology (emissions/service used) and with dematerialisation. In the studied cases, the emission intensity of energy production could be lowered for NOx by cleaning the exhaust gases. Reorganization of the structure of energy production as well as technological innovations will be essential in lowering the emissions of both CO2 and NOx. Regarding the intensity of energy use, making the combustion of fuels more efficient and reducing energy use are essential. In reducing nutrient emissions from Finnish aquaculture to the Baltic Sea (paper III) through technology, limits of biological and physical properties of cultured fish, among others, will eventually be faced. Regarding consumption, salmonids are preferred to many other protein sources. Regarding trade, increasing the proportion of imports will outsource the impacts. Besides improving technology and dematerialization, other viewpoints may also be needed. Reducing the total amount of nutrients cycling in energy systems and eventually contributing to NOx emissions needs to be emphasized. Considering aquaculture emissions, nutrient cycles can be partly closed through using local fish as feed replacing imported feed. In particular, the reduction of CO2 emissions in the future is a very challenging task when considering the necessary rates of dematerialisation and decarbonisation (paper II). Climate change mitigation may have to focus on other greenhouse gases than CO2 and on the potential role of biomass as a carbon sink, among others. The global population is growing and scaling up the environmental impact. Population issues and growing affluence must be considered when discussing emission reductions. Climate policy has only very recently had an influence on emissions, and strong actions are now called for climate change mitigation. Environmental policies in general must cover all the regions related to production and impacts in order to avoid outsourcing of emissions and leakage effects. The macro-level drivers affecting changes in emissions can be identified with the ImPACT framework. Statistics for generally known macro-indicators are currently relatively well available for different countries, and the method is transparent. In the papers included in this study, a similar method was successfully applied in different types of case studies. Using transparent macro-level figures and a simple top-down approach are also appropriate in evaluating and setting international emission reduction targets, as demonstrated in papers II and IV. The projected rates of population and affluence growth are especially worth consideration in setting targets. However, sensitivities in calculations must be carefully acknowledged. In the basic form of the ImPACT model, the economic intensity of consumption and emission intensity of use are included. In seeking to examine consumption but also international trade in more detail, imports were included in paper III. This example demonstrates well how outsourcing of production influences domestic emissions. Country-specific production-based emissions have often been used in similar decomposition analyses. Nevertheless, trade-related issues must not be ignored.

Trade Liberalization, Heterogeneous Firms and Industrial Dynamics

This master thesis studies how trade liberalization affects the firm-level productivity and industrial evolution. To do so, I built a dynamic model that considers firm-level productivity as endogenous to investigate the influence of trade on firm’s productivity and the market structure. In the framework, heterogeneous firms in the same industry operate differently in equilibrium. Specifically, firms are ex ante identical but heterogeneity arises as an equilibrium outcome. Under the setting of monopolistic competition, this type of model yields an industry that is represented not by a steady-state outcome, but by an evolution that rely on the decisions made by individual firms. I prove that trade liberalization has a general positive impact on technological adoption rates and hence increases the firm-level productivity. Besides, this endogenous technology adoption model also captures the stylized facts: exporting firms are larger and more productive than their non-exporting counterparts in the same sector. I assume that the number of firms is endogenous, since, according to the empirical literature, the industrial evolution shows considerably different patterns across countries; some industries experience large scale of firms’ exit in the period of contracting market shares, while some industries display relative stable number of firms or gradually increase quantities. The special word “shakeout” is used to describe the dramatic decrease in the number of firms. In order to explain the causes of shakeout, I construct a model where forward-looking firms decide to enter and exit the market on the basis of their state of technology. In equilibrium, firms choose different dates to adopt innovation which generate a gradual diffusion process. It is exactly this gradual diffusion process that generates the rapid, large-scale exit phenomenon. Specifically, it demonstrates that there is a positive feedback between firm’s exit and adoption, the reduction in the number of firms increases the incentives for remaining firms to adopt innovation. Therefore, in the setting of complete information, this model not only generates a shakeout but also captures the stability of an industry. However, the solely national view of industrial evolution neglects the importance of international trade in determining the shape of market structure. In particular, I show that the higher trade barriers lead to more fragile markets, encouraging the over-entry in the initial stage of industry life cycle and raising the probability of a shakeout. Therefore, more liberalized trade generates more stable market structure from both national and international viewpoints. The main references are Ederington and McCalman(2008,2009).

The Commercial Structure of Pedestrian Streets and Shopping Districts - Three Cases from Finland

Kävelykadut ovat tunnustettu tapa elävöittää keskusta-alueiden kauppaa. Aluksi moni kauppias epäilee kävelykadun tuomia muutoksia, mutta kokemus osoittaa, että kävelykadut ovat olleet menestyksekkäitä ja nostavat siellä olevien yritysten myyntiä. Jotkut yritykset eivät kuitenkin hyödy kävelykaduista, kun taas toiset hyötyvät paljon kun katu muuttuu kävelykaduksi. Tämä pro gradu -tutkielma tutkii kävelykatujen kaupallista rakennetta, jotta saataisiin selville minkätyyppiset yritykset löytyvät kävelykadulta. Tuloksia verrataan sen kaupallisen keskusvyöhykkeen kaupalliseen rakenteeseen missä kävelykatu sijaitsee. Näin saadaan selville erot kaupallisessa rakenteessa. Pro gradu tutkii myös miten tavallisia ketjuyritykset ovat kävelykaduilla ja kaupallisissa keskusvyöhykkeissä. Tutkimusaineisto koottiin kaupallisen inventoinnin avulla, joka suoritettiin kolmessa suomalaisessa kaupungissa: Tammisaaressa, Keravalla ja Porissa. Saatu aineisto luokiteltiin ja tulokset piirrettiin kartalle. Perustilastollisia menetelmiä käytettiin tulosten analysoimisessa. Tulokset eriteltiin kävelykadun, kauppakeskusten ja muiden paikkojen osalta ja luokiteltiin yleisluokkiin vähittäiskauppa, ravintola ja muu palvelu. Tulokset näyttävät, että on olemassa selkeitä eroja kun vertaa kävelykatuja ja kaupallisia keskusvyöhykkeitä. Kävelykaduilla on paljon enemmän vähittäiskauppoja, etenkin muotikauppoja, kuin muilla kaduilla. Kauppakeskuksilla on samantapainen kaupallinen rakenne kuin kävelykaduilla kun taas muilla kaduilla esiintyy vähemmän vähittäiskauppoja ja enemmän palveluyrityksiä. Ravintolat ovat melkein yhtä tavallisia koko kaupallisessa keskusvyöhykkeessä. Ketjuyritysten osalta tulokset ovat epäselviä. On olemassa osviittaa siitä, että ne ovat tavallisempia kävelykaduilla, etenkin suurissa kaupungeissa. Saatua tulosta ei ole kuitenkin tarpeeksi, jotta varmaa tietoa olisi saatu. Viimeisten 10–15 vuoden ajan Suomen kävelykadut ovat muuttuneet enemmän ravintolavaltaisiksi muiden palveluiden kustannuksella. Vähittäiskauppojen määrä on pysynyt vakaana. Suomalaiset kävelykadut eroavat kaupalliselta rakenteeltaan pohjoismaisista kävelykaduista, joilla on enemmän vähittäiskauppoja ja vähemmän palveluyrityksiä. Tapauskohtaisissa tuloksissa esiintyy paljon eroavaisuuksia. Paikalliset tekijät ovat usein voimakkaampia kuin yleiset teoriat kauppojen sijainnista kävelykaduilla. Yleisesti ottaen tulokset tukevat teoreettista viitekehystä. Tulokset antavat tarkempaa tietoa kävelykatujen ja kaupallisten keskusvyöhykkeiden kaupallisesta rakenteesta ja siitä, mitkä tekijät tähän vaikuttaa.

The Phraseology and Structure of Latin Building Inscriptions in Roman North Africa

This study analyses the diction of Latin building inscriptions. Despite its importance, this topic has rarely been discussed before: the most substantial contribution on the subject is a short dissertation by Klaus Gast (1965) that focuses on 100 inscriptions dating mostly from the Republican period. Marietta Horster (2001) also touched upon this theme in her thesis on imperial building inscriptions. I have collected my source material in North Africa because more Latin building inscriptions dating from the Imperial period have survived there than in any other area of the Roman Empire. By means of a thorough and independent survey, I have assembled all relevant African Latin building inscriptions datable to the Roman period (between 146 BC and AD 425), 1002 texts, into a corpus. These inscriptions are all fully edited in Appendix 1; Appendix 2 contains references to earlier editions. To facilitate search operations, both are also available in electronic form. They are downloadable from the address http://www.helsinki.fi/hum/kla/htm/jatkoopinnot.htm. Chapter one is an introduction dealing with the nature of building inscriptions as source material. Chapter two offers a statistical overview of the material. The following main section of the work falls into five chapters, each of which analyses one main part of a building inscription. An average building inscription can be divided into five parts: the starting phrase opens the inscription (a dedication to gods, for example), the subject part identifies the builder, the object part describes the constructed or repaired building, the predicate part records the building activity and the supplement part offers additional information on the project (it can specify the funding, for instance). These chapters are systematic and chronological and their purpose is to register and interpret the phrases used, to analyse reasons for their use and for their popularity among the different groups of builders. Chapter eight, which follows the main section of the work, creates a typology of building inscriptions based on their structure. It also presents the most frequently attested types of building inscriptions. The conclusion describes, on a general level, how the diction of building inscriptions developed during the period of study and how this striking development resulted from socio-economic changes that took place in Romano-African society during Antiquity. This study shows that the phraseology of building inscriptions had a clear correlation both with the type of builder and with the date of carving. Private builders tended to accentuate their participation (especially its financial side) in the project; honouring the emperor received more emphasis in the building inscriptions set up by communities; the texts produced by the army were concise. The chronological development is so clear that it enables stylistic dating. At the beginning of the imperial period the phrases were clear, concrete, formal and stereotyped but by Late Antiquity they have become vague, subjective, flexible, varied and even rhetorically or poetically coloured.

Structure informationnelle et constructions du kabyle : Etude de trois types de phrase dans le cadre de la grammaire constructionnelle

Information structure and Kabyle constructions Three sentence types in the Construction Grammar framework The study examines three Kabyle sentence types and their variants. These sentence types have been chosen because they code the same state of affairs but have different syntactic structures. The sentence types are Dislocated sentence, Cleft sentence, and Canonical sentence. I argue first that a proper description of these sentence types should include information structure and, second, that a description which takes into account information structure is possible in the Construction Grammar framework. The study thus constitutes a testing ground for Construction Grammar for its applicability to a less known language. It constitutes a testing ground notably because the differentiation between the three types of sentences cannot be done without information structure categories and, consequently, these categories must be integrated also in the grammatical description. The information structure analysis is based on the model outlined by Knud Lambrecht. In that model, information structure is considered as a component of sentence grammar that assures the pragmatically correct sentence forms. The work starts by an examination of the three sentence types and the analyses that have been done in André Martinet s functional grammar framework. This introduces the sentence types chosen as the object of study and discusses the difficulties related to their analysis. After a presentation of the state of the art, including earlier and more recent models, the principles and notions of Construction Grammar and of Lambrecht s model are introduced and explicated. The information structure analysis is presented in three chapters, each treating one of the three sentence types. The analyses are based on spoken language data and elicitation. Prosody is included in the study when a syntactic structure seems to code two different focus structures. In such cases, it is pertinent to investigate whether these are coded by prosody. The final chapter presents the constructions that have been established and the problems encountered in analysing them. It also discusses the impact of the study on the theories used and on the theory of syntax in general.

Aineellista ja aineetonta turvaa : Ruokakunnat, ekologis-taloudelliset resurssit ja kontaktinmuodostus Valkealassa 1630 1750

Material and immaterial security. Households, ecological and economic resources and formation of contacts in Valkeala parish from the 1630s to the 1750s. The geographical area of the thesis, Valkeala parish in the region of Kymenlaakso, is a very interesting area owing to its diversity, both in terms of natural setting and economic and cultural structure. The study begins by outlining the ecological and economic features of Valkeala and by analysing household structures. The main focus of the research lies in the contacts of the households with the outside world. The following types of contacts are chosen as indicators of the interaction: trade and credit relations, guarantees, co-operation, marriages and godparentage. The main theme of the contact analysis is to observe the significance of three factors, namely geographical extent, affluence level and kinship, to the formation of contacts. It is also essential to chart the interdependencies between ecological and economic resources, changes in the structure of households and the formation of contacts during the period studied. The time between the 1630s and the 1750s was characterized by wars, crop losses and population changes, which had an effect on the economic framework and on the structural variation of households and contact fields. In the 17th and 18th centuries Valkeala could be divided, economically, into two sections according to the predominant cultivation technique. The western area formed the field area and the eastern and northern villages the swidden area. Multiple family households were dominant in the latter part of the 17th century, and for most of the study period, the majority of people lived in the more complex households rather than in simple families. Economic resources had only a moderate impact on the structure of contacts. There was a clear connection between bigger household size and the extent and intensity of contacts. The jurisdictional boundary that ran across Valkeala from the northwest to the southeast and divided the parish into two areas influenced the formation of contacts more than the parish boundaries. Support and security were offered largely by the primary contacts with one s immediate family, neighbours and friends. Economic support was channelled from the wealthier to the less well off by credits. Cross-marriages, cross-godparentage and marital networks could be seen as manifestations of an aim towards stability and the joining of resources. It was essential for households both to secure the workforce needed for a minimum level of subsistence and to ensure the continuation of the family line. These goals could best be reached by complex households that could adapt to the prevailing circumstances and also had wider and more multi-layered contacts offering material and immaterial security.

Biophysical Characterization of Oxidized Phospholipids : Implications for Altered Membrane Structure and Function

The present study aims to elucidate the modifications in the structure and functionality of the phospholipid matrix of biological membranes brought about by free radical-mediated oxidative damage of its molecular constituents. To this end, the surface properties of two oxidatively modified phospholipids bearing an aldehyde or carboxyl function at the end of truncated sn-2 acyl chain were studied using a Langmuir balance. The results obtained reveal both oxidized species to have a significant impact on the structural dynamics of phospholipid monolayers, as illustrated by the progressive changes in force-area isotherms with increasing mole fraction of the oxidized lipid component. Moreover, surface potential measurements revealed considerable modifications in the electric properties of oxidized phospholipid containing monolayers during film compression, suggesting a packing state-controlled reorientation of the intramolecular electric dipoles of the lipid headgroups and acyl chains. Based on the above findings, a model describing the conformational state of oxidized phospholipid molecules in biological membranes is proposed, involving the protrusion of the acyl chains bearing the polar functional groups out from the hydrocarbon phase to the surrounding aqueous medium. Oxidative modifications alter profoundly the physicochemical properties of unsaturated phospholipids and are therefore readily anticipated to have important implications for their interactions with membrane-associating molecules. Along these lines, the carboxyl group bearing lipid was observed to bind avidly the peripheral membrane protein cytochrome c. The binding was reversed following increase in ionic strength or addition of polyanionic ATP, thus suggesting it to be driven by electrostatic interactions between cationic residues of the protein and the deprotonated lipid carboxyl exposed to the aqueous phase. The presence of aldehyde function bearing oxidized phospholipid was observed to enhance the intercalation of four antimicrobial peptides into phospholipid monolayers and liposomal bilayers. Partitioning of the peptides to monolayers was markedly attenuated by the aldehyde scavenger methoxyamine, revealing it to be mediated by the carbonyl moiety possibly through efficient hydrogen bonding or, alternatively, formation of covalent adduct in form of a Schiff base between the lipid aldehydes and primary amine groups of the peptide molecules. Lastly, both oxidized phospholipid species were observed to bind with high affinity three small membrane-partitioning therapeutic agents, viz. chlorpromazine, haloperidol, and doxorubicin. In conclusion, the results of studies conducted using biomimetic model systems support the notion that oxidative damage influences the molecular architecture as well as the bulk physicochemical properties of phospholipid membranes. Further, common polar functional groups carried by phospholipids subjected to oxidation were observed to act as molecular binding sites at the lipid-water interface. It is thus plausible that oxidized phospholipid species may elicit cellular level effects by modulating integration of various membrane-embedded and surface-associated proteins and peptides, whose conformational state, oligomerization, and functionality is known to be controlled by highly specific lipid-protein interactions and proper physical state of the membrane environment.

The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Population structure of Pyrenophora teres, the causal agent of net blotch of barley

Spring barley is the most important crop in Finland based on cultivated land area. Net blotch, a disease caused by Pyrenophora teres Drech., is the most damaging disease of barley in Finland. The pressure to improve the economics and efficiency of agriculture has increased the need for more efficient plant protection methods. Development of durable host-plant resistance to net blotch is a promising possibility. However, deployment of disease resistant crops could initiate selection pressure on the pathogen (P. teres) population. The aim of this study was to understand the population biology of P. teres and to estimate the evolutionary potential of P. teres under selective pressure following deployment of resistance genes and application of fungicides. The study included mainly Finnish P. teres isolates. Population samples from Russia and Australia were also included. Using AFLP markers substantial genotypic variation in P. teres populations was identified. Differences among isolates were least within Finnish fields and significantly higher in Krasnodar, Russia. Genetic differentiation was identified among populations from northern Europe and from Australia, and between the two forms P. teres f. teres (PTT, net form of net blotch) and P. teres f. maculata (PTM, spot form of net blotch) in Australia. Differentiation among populations was also identified based on virulence between Finnish and Russian populations, and based on prochloraz (fungicide) tolerance in the Häme region in Finland. Surprisingly only PTT was recovered from Finland and Russia although both forms were earlier equally common in Finland. The reason for the shift in occurrence of forms in Finland remained uncertain. Both forms were found within several fields in Australia. Sexual reproduction of P. teres was supported by recover of both mating types in equal ratio in those areas although the prevalence of sexual mating seems to be less in Finland than in Australia. Population from Krasnodar was an exception since only one mating type was found in there. Based on the substantial high genotypic variation in Krasnodar it was suggested go represent an old P. teres population, whereas the Australian samples were suggested to represent newer populations. In conclusion, P. teres populations are differentiated at several levels. Human assistance in dispersal of P. teres on infected barley seed is obvious and decreases the differentiation among populations. This can increase the plant protection problems caused by this pathogen. P. teres is capable of sexual reproduction in several areas but the prevalence varies. Based on these findings it is apparent that P. teres has the potential to pose more serious problems in barley cultivation if plant protection is neglected. Therefore, good agricultural practices, including crop rotation and the use of healthy seed, are recommended.

Properties of intramuscular connective tissue in pork and poultry with reference to weakening of structure

The most common connective tissue research in meat science has been conducted on the properties of intramuscular connective tissue (IMCT) in connection with eating quality of meat. From the chemical and physical properties of meat, researchers have concluded that meat from animals younger than physiological maturity is the most tender. In pork and poultry, different challenges have been raised: the structure of cooked meat has weakened. In extreme cases raw porcine M. semimembranosus (SM) and in most turkey M. pectoralis superficialis (PS) can be peeled off in strips along the perimysium which surrounds the muscle fibre bundles (destructured meat), and when cooked, the slices disintegrate. Raw chicken meat is generally very soft and when cooked, it can even be mushy. The overall aim of this thesis was to study the thermal properties of IMCT in porcine SM in order to see if these properties were in association with destructured meat in pork and to characterise IMCT in poultry PS. First a 'baseline' study to characterise the thermal stability of IMCT in light coloured (SM and M. longissimus dorsi in pigs and PS in poultry) and dark coloured (M. infraspinatus in pigs and a combination of M. quadriceps femoris and M. iliotibialis lateralis in poultry) muscles was necessary. Thereafter, it was investigated whether the properties of muscle fibres differed in destructured and normal porcine muscles. Collagen content and also solubility of dark coloured muscles were higher than in light coloured muscles in pork and poultry. Collagen solubility was especially high in chicken muscles, approx. 30 %, in comparison to porcine and turkey muscles. However, collagen content and solubility were similar in destructured and normal porcine SM muscles. Thermal shrinkage of IMCT occurred at approximately 65 °C in pork and poultry. It occurred at lower temperature in light coloured muscles than in dark coloured muscles, although the difference was not always significant. The onset and peak temperatures of thermal shrinkage of IMCT were lower in destructured than in normal SM muscles, when the IMCT from SM muscles exhibiting ten lowest and ten highest ultimate pH values were investigated (onset: 59.4 °C vs. 60.7 °C, peak: 64.9 °C vs. 65.7 °C). As the destructured meat was paler than normal meat, the PSE (pale, soft, exudative) phenomenon could not be ruled out. The muscle fibre cross sectional area (CSA), the number of capillaries per muscle fibre CSA and per fibre and sarcomere length were similar in destructured and normal SM muscles. Drip loss was clearly higher in destructured than in normal SM muscles. In conclusion, collagen content and solubility and thermal shrinkage temperature vary between porcine and poultry muscles. One feature in the IMCT could not be directly associated with weakening of the meat structure. Poultry breast meat is very homogenous within the species.

Glycoalkaloid Content and Starch Structure in Solanum Species and Interspecific Somatic Potato Hybrids

When genome sections of wild Solanum species are bred into the cultivated potato (S. tuberosum L.) to obtain improved potato cultivars, the new cultivars must be evaluated for their beneficial and undesirable traits. Glycoalkaloids present in Solanum species are known for their toxic as well as for beneficial effects on mammals. On the other hand, glycoalkaloids in potato leaves provide natural protection against pests. Due to breeding, glycoalkaloid profile of the plant is affected. In addition, the starch properties in potato tubers can be affected as a result of breeding, because the crystalline properties are determined by the botanical source of the starch. Starch content and composition affect the texture of cooked and processed potatoes. In order to determine glycoalkaloid contents in Solanum species, simultaneous separation of glycoalkaloids and aglycones using reversed-phase high-performance liquid chromatography (HPLC) was developed. Clean-up of foliage samples was improved using a silica-based strong cation exchanger instead of octadecyl phases in solid-phase extraction. Glycoalkaloids alpha-solanine and alpha-chaconine were detected in potato tubers of cvs. Satu and Sini. The total glycoalkaloid concentration of non-peeled and immature tubers was at an acceptable level (under 20 mg/100 g of FW) in the cv. Satu, whereas concentration in cv. Sini was 23 mg/100 g FW. Solanum species (S. tuberosum, S. brevidens, S. acaule, and S. commersonii) and interspecific somatic hybrids (brd + tbr, acl + tbr, cmm + tbr) were analyzed for their glycoalkaloid contents using liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS). The concentrations in the tubers of the brd + tbr and acl + tbr hybrids remained under 20 mg/100 g FW. Glycoalkaloid concentration in the foliage of the Solanum species was between 110 mg and 890 mg/100 g FW. However, the concentration in the foliage of S. acaule was as low as 26 mg/100 g FW. The total concentrations of brd + tbr, acl + tbr, and cmm + tbr hybrid foliages were 88 mg, 180 mg, and 685 mg/100 g FW, respectively. Glycoalkaloids of both parental plants as well as new combinations of aglycones and saccharides were detected in somatic hybrids. The hybrids contained mainly spirosolanes, and glycoalkaloid structures having no 5,6-double bond in the aglycone. Based on these results, the glycoalkaloid profiles of the hybrids may represent a safer and more beneficial spectrum of glycoalkaloids than that found in currently cultivated varieties. Starch nanostructure of three different cultivars (Satu, Saturna, and Lady Rosetta), a wild species S. acaule, and interspecific somatic hybrids were examined by wide-angle and small-angle X-ray scattering (WAXS, SAXS). For the first time, the measurements were conducted on fresh potato tuber samples. Crystallinity of starch, average crystallite size, and lamellar distance were determined from the X-ray patterns. No differences in the starch nanostructure between the three different cultivars were detected. However, tuber immaturity was detected by X-ray scattering methods when large numbers of immature and mature samples were measured and the results were compared. The present study shows that no significant changes occurred in the nanostructures of starches resulting from hybridizations of potato cultivars.