Accumulation of point mutations and reassortment of genomic RNA segments are involved in the microevolution of Puumala hantavirus in a bank vole (Myodes glareolus) population

"The genetic diversity of Puumala hantavirus (PUUV) was studied in a local population of its natural host, the bank vole (Myodes glareolus). The trapping area (2.5x2.5 km) at Konnevesi, Central Finland, included 14 trapping sites, at least 500 m apart; altogether, 147 voles were captured during May and October 2005. Partial sequences of the S, M and L viral genome segments were recovered from 40 animals. Seven, 12 and 17 variants were detected for the S, M and L sequences, respectively; these represent new wild-type PUUV strains that belong to the Finnish genetic lineage. The genetic diversity of PUUV strains from Konnevesi was 0.2-4.9% for the S segment, 0.2-4.8% for the M segment and 0.2-9.7% for the L segment. Most nucleotide substitutions were synonymous and most deduced amino acid substitutions were conservative, probably due to strong stabilizing selection operating at the protein level. Based on both sequence markers and phylogenetic clustering, the S, M and L sequences could be assigned to two groups, 'A' and 'B'. Notably, not all bank voles carried S, M and L sequences belonging to the same group, i.e. SAMALA or SBMBLB.. A substantial proportion (8/40, 20%) of the newly characterized PUUV strains possessed reassortant genomes such as SBMALA, SAMBLB or SBMALB. These results suggest that at least some of the PUUV reassortants are viable and can survive in the presence of their parental strains."

Measuring attitudes in translation: a study of Nokia business reports

Background Contemporary Finnish, spoken and written, reveals loanwords or foreignisms in the form of hybrids: a mixture of Finnish and foreign syllables (alumiinivalua). Sometimes loanwords are inserted into the Finnish sentence in their raw form just as they are found in the source language (pulp, after sales palvelu). Again, sometimes loanwords are calques, which appear Finnish but are spelled and pronounced in an altogether foreign manner (Protomanageri, Promenadi kampuksella). Research Questions What role does Finnish business translation play in the migration of foreignisms into Finnish if we consider translation "as a construct of solutions determined by the ideological constraints and conflicts characterizing the target culture" (Robyns 1992: 212)? What attitudes do the Finns display toward the presence of foreignisms in their language? What socio-economic or ideological conditions (Bassnett 1994: 321) are responsible for these attitudes? Are these conditions dynamic? What tools can be used to measure such attitudes? This dissertation set out to answer these and similar questions. Attitudes are imperialist (where otherness is both denied and transformed), defensive (where otherness is acknowledged, transformed, and vilified), transdiscursive (a neutral attitude to both otherness and transformation), or finally defective (where alien migration is acknowledged and "stimulated") (Robyns 1994: 60). Methodology The research method follows Rose's schema (1984: 8): (a) take an existing theory, (b) develop from it a proposition specific enough to be tested, (c) devise a scheme that tests this proposition, (d) carry through the scheme in practice, (e) draw up results and discuss conclusions in relation to the original theory. In other words, the method attempts an explanation of a Finnish social phenomenon based on systematic analyses of translated evidence (Lewins 1992: 4) whereby what really matters is the logical sequence that connects the empirical data to the initial research questions raised above and, ultimately to its conclusion (Yin 1984: 29). Results This research found that Finnish translators of the Nokia annual reports used a foreignism whenever possible such as komponentin instead of rakenneosa, or investoida instead of sijoittaa, and often without any apparent justification (Pryce 2003: 203-12) more than the translator's personal preference. In the old documents (minutes of meetings of the Board of Directors of Osakeyhtio H. Saastamoinen, Ltd. dated 5 July 1912-1917, a NOPSA booklet (1932), Enzo-Gutzeit-Tornator Oy document (1938), Imatra Steel Oy Annual Report 1964, and Nokia Oy Annual Report 1946), foreignisms under Haugen's (1950: 210-31) Classification #1 occurred an average of 0.6 times, while in the new documents (Nokia 1998 translated Annual Reports) they occurred an average of 6.5 times. That big difference, suggests transdiscursive and defective attitudes in Finnish society toward the other. In the 1850s, Finnish attitudes toward alien persons and cultures were hardened, intolerant and prohibitive because language politics were both nascent and emerging, and Finns adopted a defensive stance (Paloposki 2002: 102 ff) to protect their cultural and national treasures such as language and folklore. Innovation The innovation here is that no prior doctoral level research measured Finnish attitudes toward foreignisms using a business translation approach. This is the first time that Haugen's classification has been modified and applied in target language analysis. It is hoped that this method would be replicated in similar research in the future. Applications For practical applications, researchers with interest in languages, language development, language influences, language ideologies, and power structures that affect national language policies will find this thesis useful, especially the model for collecting, grouping, and analyzing foreignisms that has been demonstrated here. It is intended to document for posterity current attitudes of Finns toward the other as revealed in business translations from 1912-1964, and in 1998. This way, future language researchers would be able to explore a time-line of Finnish language development and attitudes toward the other. Communication firms may also find this research interesting. In future, could the model we adopted be used to analyze literary texts or religious texts for example? Future Trends Though business documents show transdiscursive attitudes, other segments of Finnish society may show defensive or imperialist attitudes. When the ideology of industrialization changes in the future, will Finnish attitudes toward the other change as well? Will it then be possible to use the same kind of analytical tools to measure Finnish attitudes? More broadly, will linguistic change continue in the same direction of transdiscursive attitudes, or will the change slow down or even reverse into xenophobic attitudes? Is this our model culture-specific or can it be used in the context of other cultures? Conclusion There is anger against foreignisms in Finland as newspaper publications and television broadcasts show, but research shows that a majority of Finns consider foreignisms and the languages from which they come as sources of enrichment for Finnish culture (Laitinen 2000, Eurobarometer series 41 of July 1994, 44 of Spring 1996, 50 of Autumn 1998). Ideologies of industrialization and globalization in Finland have facilitated transdiscursive tendencies. When Finland's political ideology was intolerant toward foreign influences in the 1850s because Finland was in the process of consolidating her nascent country and language, attitudes toward the importation of loanwords also became intolerant. Presently, when industrialization and globalization became the dominant ideologies, we see a shift in attitudes toward transdiscursive tendencies. Ideology is usually unseen and too often ignored by translation researchers. However, ideology reveals itself as the most powerful factor affecting language attitudes in a target culture. Key words Finnish, Business Translation, Ideology, Foreignisms, Imperialist Attitudes, Defensive Attitudes, Transdiscursive Attitudes, Defective Attitudes, the Other, Old Documents, New Documents.

Preliminary phonological analysis of the Limi dialect of Humla Bhotia

The purpose of this research was to analyse the phonological system of the Limi dialect of Humla Bhotia. Humla Bhotia is a Tibeto-Burman language that is spoken by approximately 4000 5000 people in the far northwestern Humla province of the Kingdom of Nepal. The language has not previously been the subject of analysis. The data base for this thesis was collected on two different dialects of Humla Bhotia in Kathmandu, the capital of Nepal, from February to May 2000. I had three language informants who speak Humla Bhotia as their mother tongue. One of the informants speaks the Upper Humla dialect and the other two informants speak the Limi dialect. In this thesis I have concentrated on the phonology of the dialect of Limi but occasionally I also make reference to the Upper Humla dialect. The Limi data base consists of 600 words elicited in isolation, sentences where words have been checked for consonantal and pitch variation, and five texts comprising 117 sentences. Firstly, I have studied the geographical location, population and dialects of Humla Bhotia. Five dialects were identified: Limi, Upper Humla, La Yakba, Nyinba and Humli Khyampa. Information on the dialect areas is based on the accounts of seven mother tongue speakers of the language and on Nancy Levine s (1988) anthropological research of the ethnic group Nyinba. Secondly, I have analysed the phonological system of Limi from the viewpoint of American stucturalism much along the lines followed by Pike 1966 [1947] ja 1967 [1948]. In defining the prosodic elements I have also used acoustic analysis. In the Limi dialect there are 7 vowel phonemes. No vowel clusters occur within the same syllable. In this preliminary analysis 29 contrastive plosives, 8 affricates and 5 6 fricatives were found. The data also revealed 4 nasal phonemes, two rhotic phonemes, one lateral phoneme and two central approximants. Further research is however called for to check the phonemic status of these segments. Four contrastive prosodic elements were encountered: nasalisation, length, phonation type and pitch movement. There are two contrastive types of phonation: tense and lax. Many words were found with a third type of phonation, modal phonation. How modal phonation relates to the prosodic system is unclear at this stage and is therefore left for further research to determine. There are two contrastive pitch movement tonemes: a rising toneme and falling toneme. The falling toneme occurs in free variation with a level pitch contour. Rising appears to be linked with lax phonation and falling with tense phonation.

Esimiestaitojen tärkeys, hallinta ja kehitystarpeet

This study examines the leadership skills in municipal organisation. The study reflects the manager views on leadership skills required. The purpose of this study was to reflect the most important leadership skills currently and in the future as well as the control of these skills. The study also examines the importance of the change and development needs of the leadership skills. In addition, the effect of background variables on evaluation of leadership skills were also examined. The quantitative research method was used in the study. The material was collected with the structured questionnaire from 324 Kotka city managers. SPSS-program was used to analyse the study material. Factor analysis was used as the main method for analysis. In addition, mean and standard deviations were used to better reflect the study results. Based on the study results, the most important leadership skills currently and in the future are associated with internet skills, work control, problem solving and human resource management skills. Managers expected the importance of leadership skills to grow in the future. Main growth is associated with the software utilisation, language skills, communication skills as well as financial leadership skills. Strongest competence according to managers is associated with the internet skills. Managers also considered to control well the skills related to employee know-how and manager networking. In addition, significant development needs are required in leadership skills. Main improvement areas were discovered in software utilisation, work control, human resource management skills as well as skills requiring problem solving. It should be noted that the main improvement areas appeared in the leadership skills that were evaluated as most important apart from software utilisation. Position, municipal segments and sex were observed to explain most of the deviation in received responses.

Digitoitujen väri-infrailmakuvien numeerinen monikuvatulkinta metsäninventoinnissa

The use of remote sensing imagery as auxiliary data in forest inventory is based on the correlation between features extracted from the images and the ground truth. The bidirectional reflectance and radial displacement cause variation in image features located in different segments of the image but forest characteristics remaining the same. The variation has so far been diminished by different radiometric corrections. In this study the use of sun azimuth based converted image co-ordinates was examined to supplement auxiliary data extracted from digitised aerial photographs. The method was considered as an alternative for radiometric corrections. Additionally, the usefulness of multi-image interpretation of digitised aerial photographs in regression estimation of forest characteristics was studied. The state owned study area located in Leivonmäki, Central Finland and the study material consisted of five digitised and ortho-rectified colour-infrared (CIR) aerial photographs and field measurements of 388 plots, out of which 194 were relascope (Bitterlich) plots and 194 were concentric circular plots. Both the image data and the field measurements were from the year 1999. When examining the effect of the location of the image point on pixel values and texture features of Finnish forest plots in digitised CIR photographs the clearest differences were found between front-and back-lighted image halves. Inside the image half the differences between different blocks were clearly bigger on the front-lighted half than on the back-lighted half. The strength of the phenomenon varied by forest category. The differences between pixel values extracted from different image blocks were greatest in developed and mature stands and smallest in young stands. The differences between texture features were greatest in developing stands and smallest in young and mature stands. The logarithm of timber volume per hectare and the angular transformation of the proportion of broadleaved trees of the total volume were used as dependent variables in regression models. Five different converted image co-ordinates based trend surfaces were used in models in order to diminish the effect of the bidirectional reflectance. The reference model of total volume, in which the location of the image point had been ignored, resulted in RMSE of 1,268 calculated from test material. The best of the trend surfaces was the complete third order surface, which resulted in RMSE of 1,107. The reference model of the proportion of broadleaved trees resulted in RMSE of 0,4292 and the second order trend surface was the best, resulting in RMSE of 0,4270. The trend surface method is applicable, but it has to be applied by forest category and by variable. The usefulness of multi-image interpretation of digitised aerial photographs was studied by building comparable regression models using either the front-lighted image features, back-lighted image features or both. The two-image model turned out to be slightly better than the one-image models in total volume estimation. The best one-image model resulted in RMSE of 1,098 and the two-image model resulted in RMSE of 1,090. The homologous features did not improve the models of the proportion of broadleaved trees. The overall result gives motivation for further research of multi-image interpretation. The focus may be improving regression estimation and feature selection or examination of stratification used in two-phase sampling inventory techniques. Keywords: forest inventory, digitised aerial photograph, bidirectional reflectance, converted image co­ordinates, regression estimation, multi-image interpretation, pixel value, texture, trend surface

Polymer Protected Gold Nanoparticles

Polymer protected gold nanoparticles have successfully been synthesized by both "grafting-from" and "grafting-to" techniques. The synthesis methods of the gold particles were systematically studied. Two chemically different homopolymers were used to protect gold particles: thermo-responsive poly(N-isopropylacrylamide), PNIPAM, and polystyrene, PS. Both polymers were synthesized by using a controlled/living radical polymerization process, reversible addition-fragmentation chain transfer (RAFT) polymerization, to obtain monodisperse polymers of various molar masses and carrying dithiobenzoate end groups. Hence, particles protected either with PNIPAM, PNIPAM-AuNPs, or with a mixture of two polymers, PNIPAM/PS-AuNPs (i.e., amphiphilic gold nanoparticles), were prepared. The particles contain monodisperse polymer shells, though the cores are somewhat polydisperse. Aqueous PNIPAM-AuNPs prepared using a "grafting-from" technique, show thermo-responsive properties derived from the tethered PNIPAM chains. For PNIPAM-AuNPs prepared using a "grafting-to" technique, two-phase transitions of PNIPAM were observed in the microcalorimetric studies of the aqueous solutions. The first transition with a sharp and narrow endothermic peak occurs at lower temperature, and the second one with a broader peak at higher temperature. In the first transition PNIPAM segments show much higher cooperativity than in the second one. The observations are tentatively rationalized by assuming that the PNIPAM brush can be subdivided into two zones, an inner and an outer one. In the inner zone, the PNIPAM segments are close to the gold surface, densely packed, less hydrated, and undergo the first transition. In the outer zone, on the other hand, the PNIPAM segments are looser and more hydrated, adopt a restricted random coil conformation, and show a phase transition, which is dependent on both particle concentration and the chemical nature of the end groups of the PNIPAM chains. Monolayers of the amphiphilic gold nanoparticles at the air-water interface show several characteristic regions upon compression in a Langmuir trough at room temperature. These can be attributed to the polymer conformational transitions from a pancake to a brush. Also, the compression isotherms show temperature dependence due to the thermo-responsive properties of the tethered PNIPAM chains. The films were successfully deposited on substrates by Langmuir-Blodgett technique. The sessile drop contact angle measurements conducted on both sides of the monolayer deposited at room temperature reveal two slightly different contact angles, that may indicate phase separation between the tethered PNIPAM and PS chains on the gold core. The optical properties of amphiphilic gold nanoparticles were studied both in situ at the air-water interface and on the deposited films. The in situ SPR band of the monolayer shows a blue shift with compression, while a red shift with the deposition cycle occurs in the deposited films. The blue shift is compression-induced and closely related to the conformational change of the tethered PNIPAM chains, which may cause a decrease in the polarity of the local environment of the gold cores. The red shift in the deposited films is due to a weak interparticle coupling between adjacent particles. Temperature effects on the SPR band in both cases were also investigated. In the in situ case, at a constant surface pressure, an increase in temperature leads to a red shift in the SPR, likely due to the shrinking of the tethered PNIPAM chains, as well as to a slight decrease of the distance between the adjacent particles resulting in an increase in the interparticle coupling. However, in the case of the deposited films, the SPR band red-shifts with the deposition cycles more at a high temperature than at a low temperature. This is because the compressibility of the polymer coated gold nanoparticles at a high temperature leads to a smaller interparticle distance, resulting in an increase of the interparticle coupling in the deposited multilayers.

Remote sensing of leaf area index: enhanced retrieval from close-range and remotely sensed optical observations

A wide range of models used in agriculture, ecology, carbon cycling, climate and other related studies require information on the amount of leaf material present in a given environment to correctly represent radiation, heat, momentum, water, and various gas exchanges with the overlying atmosphere or the underlying soil. Leaf area index (LAI) thus often features as a critical land surface variable in parameterisations of global and regional climate models, e.g., radiation uptake, precipitation interception, energy conversion, gas exchange and momentum, as all areas are substantially determined by the vegetation surface. Optical wavelengths of remote sensing are the common electromagnetic regions used for LAI estimations and generally for vegetation studies. The main purpose of this dissertation was to enhance the determination of LAI using close-range remote sensing (hemispherical photography), airborne remote sensing (high resolution colour and colour infrared imagery), and satellite remote sensing (high resolution SPOT 5 HRG imagery) optical observations. The commonly used light extinction models are applied at all levels of optical observations. For the sake of comparative analysis, LAI was further determined using statistical relationships between spectral vegetation index (SVI) and ground based LAI. The study areas of this dissertation focus on two regions, one located in Taita Hills, South-East Kenya characterised by tropical cloud forest and exotic plantations, and the other in Gatineau Park, Southern Quebec, Canada dominated by temperate hardwood forest. The sampling procedure of sky map of gap fraction and size from hemispherical photographs was proven to be one of the most crucial steps in the accurate determination of LAI. LAI and clumping index estimates were significantly affected by the variation of the size of sky segments for given zenith angle ranges. On sloping ground, gap fraction and size distributions present strong upslope/downslope asymmetry of foliage elements, and thus the correction and the sensitivity analysis for both LAI and clumping index computations were demonstrated. Several SVIs can be used for LAI mapping using empirical regression analysis provided that the sensitivities of SVIs at varying ranges of LAI are large enough. Large scale LAI inversion algorithms were demonstrated and were proven to be a considerably efficient alternative approach for LAI mapping. LAI can be estimated nonparametrically from the information contained solely in the remotely sensed dataset given that the upper-end (saturated SVI) value is accurately determined. However, further study is still required to devise a methodology as well as instrumentation to retrieve on-ground green leaf area index . Subsequently, the large scale LAI inversion algorithms presented in this work can be precisely validated. Finally, based on literature review and this dissertation, potential future research prospects and directions were recommended.

Problems and Algorithms for Sequence Segmentations

The analysis of sequential data is required in many diverse areas such as telecommunications, stock market analysis, and bioinformatics. A basic problem related to the analysis of sequential data is the sequence segmentation problem. A sequence segmentation is a partition of the sequence into a number of non-overlapping segments that cover all data points, such that each segment is as homogeneous as possible. This problem can be solved optimally using a standard dynamic programming algorithm. In the first part of the thesis, we present a new approximation algorithm for the sequence segmentation problem. This algorithm has smaller running time than the optimal dynamic programming algorithm, while it has bounded approximation ratio. The basic idea is to divide the input sequence into subsequences, solve the problem optimally in each subsequence, and then appropriately combine the solutions to the subproblems into one final solution. In the second part of the thesis, we study alternative segmentation models that are devised to better fit the data. More specifically, we focus on clustered segmentations and segmentations with rearrangements. While in the standard segmentation of a multidimensional sequence all dimensions share the same segment boundaries, in a clustered segmentation the multidimensional sequence is segmented in such a way that dimensions are allowed to form clusters. Each cluster of dimensions is then segmented separately. We formally define the problem of clustered segmentations and we experimentally show that segmenting sequences using this segmentation model, leads to solutions with smaller error for the same model cost. Segmentation with rearrangements is a novel variation to the segmentation problem: in addition to partitioning the sequence we also seek to apply a limited amount of reordering, so that the overall representation error is minimized. We formulate the problem of segmentation with rearrangements and we show that it is an NP-hard problem to solve or even to approximate. We devise effective algorithms for the proposed problem, combining ideas from dynamic programming and outlier detection algorithms in sequences. In the final part of the thesis, we discuss the problem of aggregating results of segmentation algorithms on the same set of data points. In this case, we are interested in producing a partitioning of the data that agrees as much as possible with the input partitions. We show that this problem can be solved optimally in polynomial time using dynamic programming. Furthermore, we show that not all data points are candidates for segment boundaries in the optimal solution.

Mining Sequential Data – in Search of Segmental Structures

Segmentation is a data mining technique yielding simplified representations of sequences of ordered points. A sequence is divided into some number of homogeneous blocks, and all points within a segment are described by a single value. The focus in this thesis is on piecewise-constant segments, where the most likely description for each segment and the most likely segmentation into some number of blocks can be computed efficiently. Representing sequences as segmentations is useful in, e.g., storage and indexing tasks in sequence databases, and segmentation can be used as a tool in learning about the structure of a given sequence. The discussion in this thesis begins with basic questions related to segmentation analysis, such as choosing the number of segments, and evaluating the obtained segmentations. Standard model selection techniques are shown to perform well for the sequence segmentation task. Segmentation evaluation is proposed with respect to a known segmentation structure. Applying segmentation on certain features of a sequence is shown to yield segmentations that are significantly close to the known underlying structure. Two extensions to the basic segmentation framework are introduced: unimodal segmentation and basis segmentation. The former is concerned with segmentations where the segment descriptions first increase and then decrease, and the latter with the interplay between different dimensions and segments in the sequence. These problems are formally defined and algorithms for solving them are provided and analyzed. Practical applications for segmentation techniques include time series and data stream analysis, text analysis, and biological sequence analysis. In this thesis segmentation applications are demonstrated in analyzing genomic sequences.

Characterization of the molecular components and function of BARE-1, Hin-Mu and Mu transposition machineries

Transposable elements, transposons, are discrete DNA segments that are able to move or copy themselves from one locus to another within or between their host genome(s) without a requirement for DNA homology. They are abundant residents in virtually all the genomes studied, for instance, the genomic portion of TEs is approximately 3% in Saccharomyces cerevisiae, 45% in humans, and apparently more than 70% in some plant genomes such as maize and barley. Transposons plays essential role in genome evolution, in lateral transfer of antibiotic resistance genes among bacteria and in life cycle of certain viruses such as HIV-1 and bacteriophage Mu. Despite the diversity of transposable elements they all use a fundamentally similar mechanism called transpositional DNA recombination (transposition) for the movement within and between the genomes of their host organisms. The DNA breakage and joining reactions that underlie their transposition are chemically similar in virtually all known transposition systems. The similarity of the reactions is also reflected in the structure and function of the catalyzing enzymes, transposases and integrases. The transposition reactions take place within the context of a transposition machinery, which can be particularly complex, as in the case of the VLP (virus like particle) machinery of retroelements, which in vivo contains RNA or cDNA and a number of element encoded structural and catalytic proteins. Yet, the minimal core machinery required for transposition comprises a multimer of transposase or integrase proteins and their binding sites at the element DNA ends only. Although the chemistry of DNA transposition is fairly well characterized, the components and function of the transposition machinery have been investigated in detail for only a small group of elements. This work focuses on the identification, characterization, and functional studies of the molecular components of the transposition machineries of BARE-1, Hin-Mu and Mu. For BARE-1 and Hin-Mu transpositional activity has not been shown previously, whereas bacteriophage Mu is a general model of transposition. For BARE-1, which is a retroelement of barley (Hordeum vulgare), the protein and DNA components of the functional VLP machinery were identified from cell extracts. In the case of Hin-Mu, which is a Mu-like prophage in Haemophilus influenzae Rd genome, the components of the core machinery (transposase and its binding sites) were characterized and their functionality was studied by using an in vitro methodology developed for Mu. The function of Mu core machinery was studied for its ability to use various DNA substrates: Hin-Mu end specific DNA substrates and Mu end specific hairpin substrates. The hairpin processing reaction by MuA was characterized in detail. New information was gained of all three machineries. The components or their activity required for functional BARE-1 VLP machinery and retrotransposon life cycle were present in vivo and VLP-like structures could be detected. The Hin-Mu core machinery components were identified and shown to be functional. The components of the Mu and Hin-Mu core machineries were partially interchangeable, reflecting both evolutionary conservation and flexibility within the core machineries. The Mu core machinery displayed surprising flexibility in substrate usage, as it was able to utilize Hin-Mu end specific DNA substrates and to process Mu end DNA hairpin substrates. This flexibility may be evolutionarily and mechanistically important.

Determinants of Coronary and Carotid Atherosclerosis in Finnish Patients with Clinically Suspected Coronary Artery Disease. A Quantitative Angiography and Ultrasound Study

Background. Cardiovascular disease (CVD) remains the most serious threat to life and health in industrialized countries. Atherosclerosis is the main underlying pathology associated with CVD, in particular coronary artery disease (CAD), ischaemic stroke, and peripheral arterial disease. Risk factors play an important role in initiating and accelerating the complex process of atherosclerosis. Most studies of risk factors have focused on the presence or absence of clinically defined CVD. Less is known about the determinants of the severity and extent of atherosclerosis in symptomatic patients. Aims. To clarify the association between coronary and carotid artery atherosclerosis, and to study the determinants associated with these abnormalities with special regard to novel cardiovascular risk factors. Subjects and methods. Quantitative coronary angiography (QCA) and B-mode ultrasound were used to assess coronary and carotid artery atherosclerosis in 108 patients with clinically suspected CAD referred for elective coronary angiography. To evaluate anatomic severity and extent of CAD, several QCA parameters were incorporated into indexes. These measurements reflected CAD severity, extent, and overall atheroma burden and were calculated for the entire coronary tree and separately for different coronary segments (i.e., left main, proximal, mid, and distal segments). Maximum and mean intima-media thickness (IMT) values of carotid arteries were measured and expressed as mean aggregate values. Furthermore, the study design included extensive fasting blood samples, oral glucose tolerance test, and an oral fat-load test to be performed in each participant. Results. Maximum and mean IMT values were significantly correlated with CAD severity, extent, and atheroma burden. There was heterogeneity in associations between IMT and CAD indexes according to anatomical location of CAD. Maximum and mean IMT values, respectively, were correlated with QCA indexes for mid and distal segments but not with the proximal segments of coronary vessels. The values of paraoxonase-1 (PON1) activity and concentration, respectively, were lower in subjects with significant CAD and there was a significant relationship between PON1 activity and concentration and coronary atherosclerosis assessed by QCA. PON1 activity was a significant determinant of severity of CAD independently of HDL cholesterol. Neither PON1 activity nor concentration was associated with carotid IMT. The concentration of triglycerides (TGs), triglyceride-rich lipoproteins (TRLs), oxidized LDL (oxLDL), and the cholesterol content of remnant lipoprotein particle (RLP-C) were significantly increased at 6 hours after intake of an oral fatty meal as compared with fasting values. The mean peak size of LDL remained unchanged 6 hours after the test meal. The correlations between total TGs, TRLs, and RLP-C in fasting and postprandial state were highly significant. RLP-C correlated with oxLDL both in fasting and in fed state and inversely with LDL size. In multivariate analysis oxLDL was a determinant of severity and extent of CAD. Neither total TGs, TRLs, oxLDL, nor LDL size were linked to carotid atherosclerosis. Insulin resistance (IR) was associated with an increased severity and extent of coronary atherosclerosis and seemed to be a stronger predictor of coronary atherosclerosis in the distal parts of the coronary tree than in the proximal and mid parts. In the multivariate analysis IR was a significant predictor of the severity of CAD. IR did not correlate with carotid IMT. Maximum and mean carotid IMT were higher in patients with the apoE4 phenotype compared with subjects with the apoE3 phenotype. Likewise, patients with the apoE4 phenotype had a more severe and extensive CAD than individuals with the apoE3 phenotype. Conclusions. 1) There is an association between carotid IMT and the severity and extent of CAD. Carotid IMT seems to be a weaker predictor of coronary atherosclerosis in the proximal parts of the coronary tree than in the mid and distal parts. 2) PON1 activity has an important role in the pathogenesis of coronary atherosclerosis. More importantly, the study illustrates how the protective role of HDL could be modulated by its components such that equivalent serum concentrations of HDL cholesterol may not equate with an equivalent, potential protective capacity. 3) RLP-C in the fasting state is a good marker of postprandial TRLs. Circulating oxLDL increases in CAD patients postprandially. The highly significant positive correlation between postprandial TRLs and postprandial oxLDL suggests that the postprandial state creates oxidative stress. Our findings emphasize the fundamental role of LDL oxidation in the development of atherosclerosis even after inclusion of conventional CAD risk factors. 4) Disturbances in glucose metabolism are crucial in the pathogenesis of coronary atherosclerosis. In fact, subjects with IR are comparable with diabetic subjects in terms of severity and extent of CAD. 5) ApoE polymorphism is involved in the susceptibility to both carotid and coronary atherosclerosis.

Written Cancer Narratives : An Ethnomedical Study of Cancer Patients' Thoughts, Emotions and Experiences

Since the second half of the 20th century, cancer has become a dominant disease in Western countries, endangering people regardless of age, gender, race or social status. Every year almost eight million people die of cancer worldwide. In Finland every fourth person is expected to fall ill with cancer at some stage of his or her life. During the 20th century, along with rapid changes in the medical system, people s awareness of cancer has increased a great deal. This has also influenced the image of cancer in popular discourse over the past decades. However, from the scientific point of view there is still much that is unclear about the disease. This thesis shows that this is a big problem for ordinary people, as, according to culture-bound illness ideology, people need an explanation about the origin of their illness in order to help them cope. The main aim of this thesis is to examine the process of being ill with cancer from the patient s point of view, in order to analyse attitudes and behaviour towards cancer and its significance and culture-bound images. This narrative-based study concentrates on patients voicings , which are important in understanding the cancer experience and when attempting to make it more open within current cultural and societal settings. The Kun sairastuin syöpään ( when I fell ill with cancer ) writing competition organised by Suomen Syöpäpotilaat ry (the Finnish Cancer Patients Association), Suomen Syöpäyhdistys ry (the Finnish Cancer Union), and Suomalaisen Kirjallisuuden Seuran kansanrunousarkisto (the Finnish Literary Society Folklore Archive) was announced on the 1st of May 1994 and lasted until the 30th of September 1994. As a result, a total of 672 cancer narratives, totalling 6384 pages, were received, filled with experiences relating to cancer. Written cancer narratives form a body of empirical data that is suitable for content or textual analysis. In this thesis, content analysis is adopted in order to become familiar with the texts and to preselect the themes and analytical units for further examination. I use multiple perspectives in order to interpret cancer patients ideas and reasoning. The ethnomedical approach unites popular health beliefs that originated in Finnish folk medicine, as well as connecting alternative medicine, which patients make use of, with biomedicine, the dominant form of medicine today. In addition to this, patients narratives, which are composed of various structural segments, are approached from the folklorist s perspective. In this way they can be seen as short pathographies, reconstructions of self-negotiation and individual decision making during the illness process. Above all, cancer patients writing describe their feelings, thoughts and experiences. Factors that appear insignificant to modern medicine, overwhelmed as it is by medical technologies that concentrate on dysfunctional tissue within diseased bodies. Ethnomedical study of cancer patients writings gives access to the human side of cancer discourse, and combines both medical, and popular, knowledge of cancer. In my view, the natural world and glimpses of tradition are bound together with one general aim within cancer narratives: to tackle the illness and mediate its meanings. Furthermore, the narrative approach reveals that participants write with the hope of offering a different interpretation of the cancer experience, and thus of confronting culturally pre-defined images and ideologies.

Analysis of Puumala hantavirus in a bank vole population in northern Finland: evidence for co-circulation of two genetic lineages and frequent reassortment between strains

"In this study, for the first time, two distinct genetic lineages of Puumala virus (PUUV) were found within a small sampling area and within a single host genetic lineage (Ural mtDNA) at Pallasjarvi, northern Finland. Lung tissue samples of 171 bank voles (Myodes glareolus) trapped in September 1998 were screened for the presence of PUUV nucleocapsid antigen and 25 were found to be positive. Partial sequences of the PUUV small (S), medium (M) and large (L) genome segments were recovered from these samples using RT-PCR. Phylogenetic analysis revealed two genetic groups of PUUV sequences that belonged to the Finnish and north Scandinavian lineages. This presented a unique opportunity to study inter-lineage reassortment in PUUV; indeed, 32% of the studied bank voles appeared to carry reassortant virus genomes. Thus, the frequency of inter-lineage reassortment in PUUV was comparable to that of intra-lineage reassortment observed previously (Razzauti, M., Plyusnina, A., Henttonen, H. & Plyusnin, A. (2008). J Gen Virol 89, 1649-1660). Of six possible reassortant S/M/L combinations, only two were found at Pallasjarvi and, notably, in all reassortants, both S and L segments originated from the same genetic lineage, suggesting a non-random pattern for the reassortment. These findings are discussed in connection to PUUV evolution in Fermoscandia."

End-User Attitudes Towards EDM Use in Construction Project Work: Case Study

This article reports on a cross-sectional case study of a large construction project in which Electronic document management (EDM) was used. Attitudes towards EDM from the perspective of individual end users were investigated. Responses from a survey were combined with data from system usage log files to obtain an overview of attitudes prevalent in different user segments of the total population of 334 users. The survey was followed by semi-structured interviews with representative users. A strong majority of users from all segments of the project group considered EDM as a valuable aid in their work processes, despite certain functional limitations of the system used and the complexity of the information mass. Based on the study a model describing the key factors affecting end user EDM adoption is proposed. The model draws on insight from earlier studies of EDM enabled projects and theoretical frameworks on technology acceptance and success of information systems, as well as the insights gained from the case study.