An adaptive controller for a class of nonlinear system using direction basis function

For a class of nonlinear dynamical systems, the adaptive controllers are investigated using direction basis function (DBF) in this paper. Based on the criterion of Lyapunov' stability, DBF is designed which guarantees that the output of the controlled system asymptotically tracks the reference signals. Finally, the simulation shows the good tracking effectiveness of the adaptive controller.

Quantum well controller

A quantum well controller (QWC) consisting of a direct-gap/indirect-gap quantum well and a doping interface is proposed to control the dynamic operation of the Gunn active layer. Through the Monte Carlo simulation a new relaxation mode for this new device is found. The oscillation and amplification behavior of the Gunn active layer under the control of the QWC is investigated theoretically and experimentally. All work demonstrates the great control capacity of the QWC and provides a new way to improve the performance of semiconductor devices. A new oscillation diode made of the QWC and a Gunn active layer has been designed and fabricated. In the 8 mm band the highest pulse output power of these diodes is 2.55 W and the highest conversion efficiency is 18%.

同步加速器高频系统前端控制器改进设计；Improvement Design of RF Front-end Controller for Synchrotron RF System

介绍了在CSR同步加速器高频控制系统改进项目中,高频前端控制器的改进设计。根据系统改进的具体要求,采用DSP+FPGA双电路板的体系结构,对高频前端控制器各个部分做了详细的设计,并给出了具体的资源消耗结果和设计图。

CSRe团簇内靶温度闭环控制器设计；Design of Closed Loop Temperature Controller for CSRe Internal Target System

介绍了国家重大科学工程项目——兰州重离子加速器冷却存储环(HIRFL-CSR)的实验环(CSRe)团簇内靶温度闭环控制器的设计。该控制器给气体喷嘴处测温电阻提供长时间稳定度为0.1%的1mA恒定电流,通过12位ADC得到喷嘴温度,并通过混合信号处理器MSP430F149来实现制冷/加热闭环操作。在多种不同实验气体的情况下,该控制器的温度控制精度小于0.5K。目前,该控制器在现场工作良好。

Optimal Fuzzy PID Controller with Incomplete Derivation and Its Simulation Research on Application of Intelligent Artificial Legs

提出了一种新的最优模糊PID控制器，它由两部分组成，即在线模糊推理机构和带有不完全微分的常规PID控制器，在模糊推理机构中，引入了三个可调节因子xp,xi和xd，其作用是进一步修改和优化模糊推理的结果，以使控制器对一个给定对象具有最优的控制效果，可调节因子的最优值采用ITAE准则及Nelder和Mead提出的柔性多面体最优搜索算法加以确定，这种PID控制器被用来控制由作者设计的智能人工腿中的一个直流电机，仿真结果表明该控制器的设计是非常有效的，它可被用于控制各种不同的对象和过程。

Materials selection in mechanical design for microsensors and microactuators

Microsensors and microactuators are vital organs of microelectromechanical systems (MEMS), forming the interfaces between controller and environment. They are usually used for devices ranging in size at sub-millimeter or micrometer level, transforming energy between two or more domains. Presently, most of the materials used in MEMS devices belong to the silicon material system, which is the basis of the integrated circuit industry. However, new techniques are being explored and developed, and the opportunities for MEMS materials selection are getting broader. The present paper tries to apply 'performance index' to select the material best suited to a given application, in the early stage of MEMS design. The selection is based on matching performance characteristics to the requirements. A series of performance indices are given to allow a wide range comparison of materials for several typical sensing and actuating structures, and a rapid identification of candidates for a given task. (C) 2002 Elsevier Science Ltd. All rights reserved.

Synchronization of modified Chua's circuit with x vertical bar x vertical bar function

This paper considers the chaos synchronization of the modified Chua's circuit with x vertical bar x vertical bar function. We firstly show that a couple of the modified Chua systems with different parameters and initial conditions can be synchronized using active control when the values of parameters both in drive system and response system are known aforehand. Furthermore, based on Lyapunov stability theory we propose an adaptive active control approach to make the states of two identical Chua systems with unknown constant parameters asymptotically synchronized. Moreover the designed controller is independent of those unknown parameters. Numerical simulations are given to validate the proposed synchronization approach.

一般广义离散系统动态输出反馈H_∞控制器设计

提出一种用于一般广义离散系统的严格真动态输出反馈H_∞控制器设计方法。首先，构造辅助广义离散系统，给出该系统的状态反馈H_∞控制器设计方法，在此基础上，用两组矩阵不等式给出使一般广义离散系统是允许的且满足H_∞范数限制的控制器存在的充分条件，并给出了控制器的解析表达式。通过解这两组矩阵不等式，即可获得所需的控制器。控制器的可解性条件由系统的系数矩阵表达，因此不需要矩阵分解，可避免由矩阵分解产生的数值问题。仿真结果证实算法的有效性。

节流器内液-固两相流固体颗粒冲蚀数值模拟

建立了考虑颗粒碰撞的颗粒冲蚀计算模型,该数学模型包括:在Eulerian坐标系下求解连续相流场;在Lagrangian坐标系下运用离散颗粒硬球模型求解颗粒碰撞;应用半实验关联式求解颗粒冲蚀速率。对水力加砂压裂施工中节流器内液-固两相流的固体颗粒运动和冲蚀特性进行了数值模拟。计算结果表明,固体颗粒密集于节流器入口到出口的一段狭长区域内,冲蚀速率随流体速度呈指数性变化。颗粒直径越大,冲蚀速率也越大。节流器内冲蚀最严重的位置发生在距离节流器出口上边缘10mm以内的局部区域。

用于多无人机编队飞行的PIDA+逆飞行控制器

设计了一种结合PIDA控制及逆控制的多无人机编队飞行控制器.分析了多无人机编队飞行中飞行耦合气流的估计范围,针对个体无人机的轨迹控制模型讨论了其飞行控制器需求,结合逆控制的解耦性能和PIDA控制器低模型依赖、简单结构、快速性等优点,设计了一种PIDA+逆的飞行控制器,最后,以控制器输出约束、飞行气动力参数变化以及气动耦合扰动为指标对PID控制和PIDA+逆控制的控制效果进行了对比仿真,仿真结果表明,PIDA十逆控制能够有效的抑制模型参数不确定性带来的影响,并且在控制器输出约束条件下仍能保持较好的动态性、准确性和鲁棒性.

五自由度纳米级定位工作台的设计研究

提出一种新型的五自由度精密定位平台的工作原理及其设计方法。工作台采用柔性导向机构实现平移及转动功能，采用压电陶瓷作为驱动元件，外置纳米级电容传感器作为位移量测量反馈元件，采用数字PID控制方法，可以实现纳米级精度的定位。给出了多种形式柔性导向机构刚度计算公式及设计实例。

用于多普勒测风雷达的单频全固态激光器稳频

采用Pound-Drever-Hall技术，对用于多普勒测风雷达的种子注入激光器的主动激光器进行稳频，将其频率锁定在一个特殊设计的法珀腔上。该法珀腔总体采用零膨胀微晶玻璃材料制成，具有极高的温度稳定性。使用计算机采集鉴频信号并且进行处理。锁定后，1秒内激光器的相对频率漂移为±25kHz，一小时内的相对频率漂移为±55kHz，满足多普勒测风雷达的要求。

Analysis of the additional modulation of semiconductor lasers using optical heterodyne techniques

In this letter, the power spectrum of a cooled distributed feedback laser module is measured using the self-heterodyne technique. Periodical oscillation peaks have been observed in the measurement. Further investigation shows that the additional modulation signal is coupled from the thermal electric cooler (TEC) controller to the laser driver, and then applied to the laser diode. The additional modulation can be eliminated by properly isolating the laser driving source from the TEC controller.

A 1,000 Frames/s Programmable Vision Chip with Variable Resolution and Row-Pixel-Mixed Parallel Image Processors

A programmable vision chip with variable resolution and row-pixel-mixed parallel image processors is presented. The chip consists of a CMOS sensor array, with row-parallel 6-bit Algorithmic ADCs, row-parallel gray-scale image processors, pixel-parallel SIMD Processing Element (PE) array, and instruction controller. The resolution of the image in the chip is variable: high resolution for a focused area and low resolution for general view. It implements gray-scale and binary mathematical morphology algorithms in series to carry out low-level and mid-level image processing and sends out features of the image for various applications. It can perform image processing at over 1,000 frames/s (fps). A prototype chip with 64 x 64 pixels resolution and 6-bit gray-scale image is fabricated in 0.18 mu m Standard CMOS process. The area size of chip is 1.5 mm x 3.5 mm. Each pixel size is 9.5 mu m x 9.5 mu m and each processing element size is 23 mu m x 29 mu m. The experiment results demonstrate that the chip can perform low-level and mid-level image processing and it can be applied in the real-time vision applications, such as high speed target tracking.