THE DETERMINATION OF STANDARD ELECTROMOTIVE FORCE OF CELL Cu vertical bar CuSO4 vertical bar Hg2SO4-Hg AT DIFFERENT TEMPERATURES

The emfs of Cu|CuSO_4|Hg_2SO_4-Hg were determined at 5 temperature points from 278.15K to 313.15K. Based on the Pitzer' s Equation a polynomial approximation for the determination of standard emf, E_m, was proposed. The values of E_m obtained by author's method agree with values of E_m obtained by the extended Debye-Huckel equation within experimental errors. Compared with the extrapolation result of extended Debye-Huckel equation, the uncertainty by the selecting of parameter of ion size was avoided.By the...

Is inorganic nutrient enrichment a driving force for the formation of red tides? A case study of the dinoflagellate Scrippsiella trochoidea in an embayment

Red tides (high biomass phytoplankton blooms) have frequently occurred in Hong Kong waters, but most red tides occurred in waters which are not very eutrophic. For example, Port Shelter, a semi-enclosed bay in the northeast of Hong Kong, is one of hot spots for red tides. Concentrations of ambient inorganic nutrients (e.g. N, P), are not high enough to form the high biomass of chlorophyll a (chl a) in a red tide when chl a is converted to its particulate organic nutrient (N) (which should equal the inorganic nutrient, N). When a red tide of the dinoflagellate Scrippsiella trochoidea occurred in the bay, we found that the red tide patch along the shore had a high cell density of 15,000 cells ml(-1), and high chl a (56 mu g l(-1)), and pH reached 8.6 at the surface (8.2 at the bottom), indicating active photosynthesis in situ. Ambient inorganic nutrients (NO3, PO4, SiO4, and NH4) were all low in the waters and deep waters surrounding the red tide patch, suggesting that the nutrients were not high enough to support the high chl a >50 mu g l(-1) in the red tide. Nutrient addition experiments showed that the addition of all of the inorganic nutrients to a non-red-tide water sample containing low concentrations of Scrippsiella trochoidea did not produce cell density of Scrippsiella trochoidea as high as in the red tide patch, suggesting that nutrients were not an initializing factor for this red tide. During the incubation of the red tide water sample without any nutrient addition, the phytoplankton biomass decreased gradually over 9 days. However, with a N addition, the phytoplankton biomass increased steadily until day 7, which suggested that nitrogen addition was able to sustain the high biomass of the red tide for a week with and without nutrients. In contrast, the red tide in the bay disappeared on the sampling day when the wind direction changed. These results indicated that initiation, maintenance and disappearance of the dinoflagellate Scrippsiella trochoidea red tide in the bay were not directly driven by changes in nutrients. Therefore, how nutrients are linked to the formation of red tides in coastal waters need to be further examined, particularly in relation to dissolved organic nutrients. (C) 2008 Elsevier B.V. All rights reserved.

Sensitisation identification of stainless steel to intergranular stress corrosion cracking by atomic force microscopy

A new technique was developed for characterisation of stainless steel to intergramilar stress corrosion cracking by atomic force microscopy. The technique proved to be effective in sensitisation identification of AISI 304 stainless steel and might be promising in sensitisation identification of other stainless steels. (c) 2007 Elsevier B.V. All rights reserved.

基于CAN总线的力传感器与机器人控制器通讯设计

研磨机器人系统中,研磨头与工件的接触力是保证加工精度,进行机器人力控制的一个重要因 素。采用 CAN 通讯可以确保力传感器准确、及时地把力信息传送给控制器进行力控制。本文 给出了6维腕力传感器与机器人控制器通讯的硬件结构,制定了可靠的通讯协议,实现了力信 息的正确读取,为研磨机器人控制系统获得可靠的力信息提供了一种新的解决方案。

碳纳米管探针的制作方法研究

碳纳米管的小直径、高纵横比、高强度和高弹性、优良的耐磨损性能以及独特的电学和化学特性,使其成为高分辨率原子力显微镜的理想探针针尖。本文根据制作工艺的特点,综述现有碳纳米管探针的代表性研究和制作方法:组装式和生长式。组装式是通过手工、电场或磁场的方式将制备好的碳纳米管粘附到常规硅探针的末端;而生长式是在常规硅探针末端或悬臂梁上定点催化生长出一定直径和长度的CNT。最后指出这些方法目前存在的主要问题。

仿人机器人控制系统的研究与实现

根据仿人机器人控制性能的要求,设计开发了关节控制器,并通过CAN总线把各个关节控制器、力传感器及上位机连接在一起,构成了分布式控制系统.利用无线局域网技术,实现了语音、视频等多媒体信息的传输,把监控台、头部、上身和移动平台连接在一起,构成了仿人机器人完整的控制系统.最后提出了一些设想以提高系统的性能.

仿人机器人系统的研究与实现

针对仿人机器人的结构和控制性能的要求,设计开发了机器人的关节控制器,并利用CAN总线把各个关节和力传感器及上位机连接在一起,构成了有效可靠的分布式控制系统;利用无线局域网技术,实现了语音、视频等多媒体信息的传输,构成了仿人机器人完整的控制系统。最后提出了一些设想以提高系统的性能。

基于CAN的仿人机器人控制器的设计与实现

本文针对仿人机器人的结构和控制性能的要求,设计并实现了基于CAN的关节控制器,并利用CAN把各个关节和力传感器及上位机连接在一起,构成了有效可靠的控制系统。主要包括仿人机器人的总体结构、控制器的硬件与软件的设计实现、控制系统的拓扑结构等,并提出了一些设想以提高系统的性能。

Optimal Fuzzy PID Controller with Incomplete Derivation and Its Simulation Research on Application of Intelligent Artificial Legs

提出了一种新的最优模糊PID控制器，它由两部分组成，即在线模糊推理机构和带有不完全微分的常规PID控制器，在模糊推理机构中，引入了三个可调节因子xp,xi和xd，其作用是进一步修改和优化模糊推理的结果，以使控制器对一个给定对象具有最优的控制效果，可调节因子的最优值采用ITAE准则及Nelder和Mead提出的柔性多面体最优搜索算法加以确定，这种PID控制器被用来控制由作者设计的智能人工腿中的一个直流电机，仿真结果表明该控制器的设计是非常有效的，它可被用于控制各种不同的对象和过程。

精密1号装配机器人控制系统的体系结构

介绍了精密1号装配机器人控制系统体系结构的设计与实现。精密1号机器人是国家863计划智能机器人主题立项研制的一台SCARA结构的4轴装配机器人型号样机。它采用直接驱动技术，具有较高的运动速度和定位精度，配有高性能的视觉和力觉传感器，控制系统以Intel公司的iSBC386／12系列计算机和iRMXⅢ实时多任务操作系统为基础，采用上、下两级分布式计算机结构。控制系统除具有一般的机器人控制器的功能外，还具有用户多任务编程、可基于视觉和力觉传感器信息控制、离线编程和图形动画仿真等特性。

动基座机器人的末端受限鲁棒跟踪控制

结合具有扰动基座末端受限机器人的动力学特性，提出了虚构线性不确定系统的匹配模型概念．通过引入线性不确定系统的鲁棒跟踪控制器设计方法，发展了一种新的受约束机器人的力鲁棒跟踪控制方法．文中给出了动基座ＰＵＭＡ５６２机器人的实验结果。

基于滑转率的六轮纵列式月球车驱动控制研究

基于车轮滑转率和车轮地面力学,研究了月球车在松软月面行驶时的车轮过度下陷问题.将月球车车轮下陷和车轮—土壤作用力表达为车轮滑转率的函数,结合车辆地面力学理论并考虑纵列式车轮多通过性土壤参数的修正,建立了月球车的动力学模型.判断车轮是否发生过度下陷的标准为土壤所提供给驱动轮的土壤推力能否克服土壤对车轮的阻力.利用建立的动力学模型,计算出能够保证车轮不会过度下陷的期望滑转率.考虑到月球车动力学系统的非线性和不确定性,设计了以车轮滑转率为状态变量的滑模驱动控制器.仿真结果表明,采用该控制器可以较快地跟踪期望滑转率,避免车轮的过度滑转下陷,保证月球车能够在软质路面上正常行驶.