IN-SITU SCANNING TUNNELING MICROSCOPIC STUDY OF NICKEL ELECTRODEPOSITION ON HOPG

The early stages of the electrodeposition of nickel on highly oriented pyrolytic graphite (HOPG) were investigated by in situ scanning tunnelling microscopy, scanning electron microscopy and electrochemical measurements. Experimental results showed that t

DIRECT OBSERVATION OF NATIVE AND UNFOLDED GLUCOSE-OXIDASE STRUCTURES BY SCANNING-TUNNELING-MICROSCOPY

Native and unfolded glucose oxidase (GOD) structures have been directly observed with scanning tunnelling microscopy (STM) for the first time. STM images show an opening butterfly-shaped pattern for the native GOD. When GOD molecules are extended on anodi

扫描隧道显微镜研究高密度聚乙烯高取向薄膜的表面结构

材料的表面性能和表面之间的相互作用对材料本身的性能有很大影响。由于材料表面结构比较复杂,同时受到研究手段的限制,对材料表面的了解还很少。扫描隧道显微镜(STM)的快速发展为在原子水平上研究物质的表面结构和性能提供了新的途径。可是,STM 所观察的样品需要有导电性,但是多数聚合物都是非导电性的,这使得 STM 在高聚物方面的应用受到了限制。最近的研究成果表明将非导电的有机物薄膜放在能导

钴卟啉修饰电极对分子氧电催化还原的扫描隧道显微镜研究

利用扫描隧道显微镜(STM)研究了高定向热解石墨(HOPG)和玻璃碳电极(GC)表面的性质,并对修饰钻卟啉后的表面形貌变化进行了探讨.结合修饰钴卟啉前后的循环伏安结果和STM形貌图,讨论了电极表面的结构对分子氧的电催化还原反应的影响.从微观角度阐述了GC电极对氧的电催化还原活性明显高于HOPG电极的内在因素,为修饰电极的表面性能研究提供了经验.

吡咯在HOPG上电聚合机理的ECSTM现场观测

电聚吡咯过程机理的研究,多年来由于仪器的限制仅限于从间接的方式获得证据,为了得到溶液中真实的电聚吡咯过程信息,我们用自制的ECSTM仪器首次对电聚吡咯成膜的全过程跟踪观测,得到了有意义的结果。 1 实验条件 ECSTM仪器是本实验室在中科院北京电子显微镜实验室制造的STM基础上

Langmuir-Blodgett film of phycobilisomes from blue-green alga Spirulina platensis

The phycobilisomes were isolated from blue-green alga Spirulina platensis, and could form monolayer film at air/water interface. The monolayer film of phycobilisomes was transferred to newly cleaved mica, and coated with gold. Scanning tunneling microscope was used to investigate the structure of the Langmuir-Blodgett film of phycobilisomes. It was shown that phycobilisomes in the monolayer arrayed in rows with core attaching on the substrate surface and rods radiating towards the air phase, this phenomenon was similar to the arrangement of phycobilisomes on cytoplasmic surface of thylakoid membrane in vivo. The possible applications of the Langmuir-Blodgett film of phycobilisomes were also discussed.

In vitro assembly of R-phycoerythrin from marine red alga Polysiphonia urceolata

Scanning tunneling microscope was used to investigate the in vitro assembly of R-phycoerythrin (R-PE) from the marine red alga Polysiphonia urceolata. The results showed that R-PE molecules assembled together by disc-to-disc while absorbing on HOPG surface, which just looked like the rods in the phycobilisomes. When the water-soluble R-PE was dissolved in 2% ethanol/water spreading solution, they could form monolayer film at the air/water interface. Similar disc-to-disc array of R-PE was constituted in the two-dimensional Langmuir-Blodgett film by the external force. It could be concluded that, apart from the key role of time linker polypeptides, the in vivo assembly of phycobiliproteins into phycobilisomes is also dependent on the endogenous properties of phycobiliprotein themselves.

A new model of phycobilisome in Spirulina platensis

Phycobilisomes (PBS) were isolated from blue-green alga Spirulina platensis. Scanning tunneling microscope was used to investigate the three-dimensional structure of PBS deposited on freshly cleaved highly oriented pyrolytic graphite (HOPG) in ambient condition at room temperature. The results showed that the rods of PBS radiated from the core to different directions in the space other than arrayed in one plane, which was different from the typical hemi-discoidal model structure. The diameter of PBS was up to 70 nm, and the rod was approximately 50 nm in length. Similar results were observed in Langmuir-Blodgett (LB) film of PBS. The dissociated PBS could reaggregate into rod-like structures and easily form two-dimensional membrane while being absorbed on HOPG, however, no intact PBS was observed. The filling-space model structure of PBS in Spirulina platensis with STM from three-dimensional real space at nanometer scale was found, which showed that this new structural model of PBS surely exists in blue-green algae and red algae. The function of this structural model of PBS was also discussed.

Study on the structure of C-phycocyanin in Spirulina platensis with scanning tunneling microscope

The C-phycocyanin (C-PC) trimmer was isolated from the blue-green alga Spirulina platensis, and scanning tunnelling microscope (STM) was used to investigate its structure, High resolution STM images of C-PC were obtained. From the STM images, it could be observed that the C-PC molecules were disk-like in shape and the subunits of C-PC arranged in ring-like pattern with a channel in the center. After filter treatment, the folding of the polypeptide chains could be. seen clearly. This is the first time to observe directly the topography of phycobiliprotein, and the results showed STM to be a powerful tool for the structural study of phycobiliproteins.

INVESTIGATION OF C-PHYCOCYANIN FROM BLUE-GREEN-ALGA SPIRULINA-PLATENSIS WITH SCANNING TUNNELING MICROSCOPE

C-phycocyanin (C-PC) was isolated from blue-green alga spirulina platensis. A scanning tunneling microscope (STM) has been used to investigate its three-dimensional structure. The samples were dialyzed before the STM experiment, and then deposited on highly oriented pyrolytic graphite (HOPG). The measurement was carried out in ambient condition at room temperature. STM images showed that C-phycocyanin was uniformly distributed on solid-state substrate HOPG. The shape of C-phycocyanin is disklike with a channel in the center. It is concluded that STM has great potential to observe the structure of biliproteins and phycobilisomes.

Axial growth of hexactinellid spicules: Formation of cone-like structural units in the giant basal spicules of the hexactinellid Monorhaphis

The glass sponge Monorhaphis chuni (Porifera: Hexactinellida) forms the largest bio-silica structures on Earth; their giant basal spicules reach sizes of up to 3 m and diameters of 8.5 mm. Previously, it had been shown that the thickness growth proceeds by appositional layering of individual lamellae; however, the mechanism for the longitudinal growth remained unstudied. Now we show, that the surface of the spicules have towards the tip serrated relief structures that are consistent in size and form with the protrusions on the surface of the spicules. These protrusions fit into the collagen net that surrounds the spicules. The widths of the individual lamellae do not show a pronounced size tendency. The apical elongation of the spicule proceeds by piling up cone-like structural units formed from silica. As a support of the assumption that in the extracellular space silicatein(-like) molecules exist that associate with the external surface of the respective spicule immunogold electron microscopic analyses were performed. With the primmorph system from Suberites domuncula we show that silicatein(-like) molecules assemble as string- and net-like arrangements around the spicules. At their tips the silicatein(-like) molecules are initially stacked and at a later stay also organized into net-like structures. Silicatein(-like) molecules have been extracted from the giant basal spicule of Monorhaphis. Applying the SDS-PAGE technique it could be shown that silicatein molecules associate to dimers and trimers. Higher complexes (filaments) are formed from silicatein(-like) molecules, as can be visualized by electron microscopy (SEM). In the presence of ortho-silicate these filaments become covered with 30-60 nm long small rod-like/cuboid particles of silica. From these data we conclude that the apical elongation of the spicules of Monorhaphis proceeds by piling up cone-like silica structural units, whose synthesis is mediated by silicatein(-like) molecules. (C) 2008 Elsevier Inc. All rights reserved.

基于AFM的机器人化纳米操作系统综述

对基于扫描隧道显微镜(Scanning tunnel microscope,STM)及原子力显微镜(Atomicforcemicroscope,AFM)的纳米操作技术发展进行阐述,针对其中存在的主要问题,引述出机器人化纳米操作的必要性。接着,对国内外机器人化纳米操作系统的研究进展、现状及存在的主要问题进行详细分析,提出基于AFM的机器人化纳米操作系统的结构原型,并指出实现机器人化纳米操作所需解决的关键技术问题及相应的解决方案之一,为进行深入的机器人化纳米操作研究提供了可以借鉴的研究方向。

碳纳米管探针的制作方法研究

碳纳米管的小直径、高纵横比、高强度和高弹性、优良的耐磨损性能以及独特的电学和化学特性,使其成为高分辨率原子力显微镜的理想探针针尖。本文根据制作工艺的特点,综述现有碳纳米管探针的代表性研究和制作方法:组装式和生长式。组装式是通过手工、电场或磁场的方式将制备好的碳纳米管粘附到常规硅探针的末端;而生长式是在常规硅探针末端或悬臂梁上定点催化生长出一定直径和长度的CNT。最后指出这些方法目前存在的主要问题。

长时记忆中图形不同特征的加工与提取

Information can be represented both conceptually and imaginarily in long-term memory. However, it seems that only conceptual representation appears, neglecting imaginary information, in most of the long-term memory (LTM) models. In the matter of fact, picture can be stored in LTM directly and conceptually. There is no evidence for what specific type of information, conceptual or imaginary, for the color, shape, or texture to be represented. However, it is evident that the shape and color can be represented separately in LMT. Further research is needed on whether features are represented separately or not, such as color and texture, texture and shape etc. Rehearsal plays important role in picture memory besides the types of storage and representation. Memory of picture is indeed enhanced by rehearsal. There are two types of rehearsal. One is for creating image, another is articulatory loop. Which one will be taken during picture memory process depends on the characteristics of stimuli, subjects' encoding preferences and/or task requirements. Nevertheless, the relation between two types of rehearsal is not very clear yet up to now. Different features could be activated at different time course or possibilities since they can be represented separately. Six experiments were conducted dealing with the characteristics of representation, rehearsal and retrieval of picture in LTM. From these experiments, further understanding of picture information processing was expected. It would add more evidence to the LTM models, and make practical sense to the computer visual identification. The first two experiments were based on the paradigm from Hanna et al.(1996) to investigate separable representation of texture and shape, texture and color. The results indicated that texture could be represented separately with color and shape respectively. It suggested that different features might be processed in different way during remembering. Another interest finding is that recognition performance for shape, color and texture are quite different. What for shape is highest, for color is lowest, and for texture is between of them. Three features of picture can be represented separately. How about the roles of rehearsal when they enter the LTM from short-term memory(STM)? The second three experiments assigned three different types of rehearsal, i. e. visual, verbal, and subject-run(might be both of visual and verbal). The findings are that performances of picture memory were affected significantly by different types of rehearsal. Both visual and verbal rehearsal played important role during remembering process. It seems that verbal rehearsal, which might enhance the relative strength of memory trace, was much more effective than visual one. In addition, subjects tended to choose those difficult-to-name, features to rehearse, to improve the memory performance. Only two features were changed in each of the first two experiments. They might interact (facilitate or disturb) each other when they were retrieved. So it was difficult to identify the retrieval difference between them. In the last experiment, easy-to-name pictures were studied, and only one feature could be recognized. The results indicated that the retrieval performances of three features(shape, color, and texture) were quite different. They were different on the relative strength of memory trace, with the shape was strongest, color was lightest, and texture was in between. No difference was found on the absolute strength of them.

Controlled growth of uniform silver clusters on HOPG

We have investigated growth of silver clusters on three different, i.e. normally cleaved, thermally oxidized and Ar+ ion sputtered highly oriented pyrolytic graphite (HOPG), surfaces. Scanning tunneling microscopy (STM) observations reveal that uniformly sized and spaced Ag clusters only form on the sputtered surface. Ar+ sputtering introduces relatively uniform surface defects compared to other methods. These defects are found to serve as preferential sites for Ag cluster nucleation, which leads to the formation of uniform clusters. (c) 2005 Elsevier B.V. All rights reserved.