Compact non-binary fast adders using single-electron devices

This paper proposes compact adders that are based on non-binary redundant number systems and single-electron (SE) devices. The adders use the number of single electrons to represent discrete multiple-valued logic state and manipulate single electrons to perform arithmetic operations. These adders have fast speed and are referred as fast adders. We develop a family of SE transfer circuits based on MOSFET-based SE turnstile. The fast adder circuit can be easily designed by directly mapping the graphical counter tree diagram (CTD) representation of the addition algorithm to SE devices and circuits. We propose two design approaches to implement fast adders using SE transfer circuits the threshold approach and the periodic approach. The periodic approach uses the voltage-controlled single-electron transfer characteristics to efficiently achieve periodic arithmetic functions. We use HSPICE simulator to verify fast adders operations. The speeds of the proposed adders are fast. The numbers of transistors of the adders are much smaller than conventional approaches. The power dissipations are much lower than CMOS and multiple-valued current-mode fast adders. (C) 2009 Elsevier Ltd. All rights reserved.

Multiple energy transfers in rare earth complex-doped SiO2 spheres

Silica spheres doped with Eu(TTFA)(3) and/or Sm(TTFA)(3) were synthesized by using the modified Stober method. The transmission electron microscope image reveals that the hybrid spheres have smooth surfaces and an average diameter of about 210 nm. Fluorescence spectrometer was used to analyze the fluorescence properties of hybrid spheres. The results show that multiple energy transfer processes are simultaneously achieved in the same samples co-doped with Eu (TTFA)(3) and Sm(TTFA)(3), namely between the ligand and Eu3+ ion, the ligand and Sm3+ ion, and Sm3+ ion and Eu3+, ion. Energy transfer of Sm3+-> Eu3+, in the hybrid spheres leads to fluorescence enhancement of Eu3+ emission by approximately an order of magnitude. The lifetimes of the hybrid spheres were also measured.

Multi-electron processes in 4.15-11.08 keV/u(13)C(6+) on argon collisions

The relative partial cross sections for C-13(6+)-Ar collisions at 4.15-11.08 keV/u incident energy are measured. The cross-section ratios sigma(2E)/sigma(SC), sigma(3E)/sigma(SC), sigma(4E)/sigma(SC) and sigma(5E)/sigma(SC) are approximately the constants of 0.51 +/- 0.05, 0.20 +/- 0.03, 0.06 +/- 0.03 and 0.02 +/- 0.01 in this region. The significance of the multi-electron process in highly charged ions (HCIs) with argon collisions is demonstrated (sigma(ME)/sigma(SC) as high as 0.79 +/- 0.06). In multi-electron processes, it is shown that transfer ionization is dominant while pure electron capture is weak and negligible. For all reaction channels, the cross-sections are independent of the incident energy in the present energy region, which is in agreement with the static characteristic of classic models, i.e. the molecular Coulomb over-the-barrier model (MCBM), the extended classical over-the-barrier (ECBM) and the semiempirical scaling laws (SL). The result is compared with these classical models and with our previous work of C-13(6+)-Ne collisions

Multi-electron processes in C-13(6+) ions with neon collisions in energy region 4.15-11.08 keV/u

The cross-section ratios of double-, triple-, quadruple-, and the total multi-electron processes to the single electron capture process sigma(DE)/sigma(SC), sigma(TE)/sigma(SC), sigma(QE)/sigma(SC) and sigma(ME)/sigma(SC)) as well as the relative ratios among reaction channels in double-electron active, triple-electron active and quadruple- electron active are measured in C-13(6+) -Ne collision in the energy region of 4.15-11.08 keV/u by employing position-sensitive and time-of-flight coincident techniques. It is determined that the cross-section ratios sigma(DE)/sigma(SC), sigma(TE)/sigma(SC), sigma(QE)/sigma(SC) and sigma(ME)/sigma(SC) are approximately the constants of 0.20 +/- 0.03, 0.16 +/- 0.04, 0.06 +/- 0.02 and 0.42 +/- 0.05. These values are obviously smaller than the predictions of the molecular Coulomb over-the-barrier model (MCBM) [J. Phys. B 23 (1990) 4293], the extended classical over-the-barrier model (ECBM) [J. Phys. B 19 (1986) 2925] and the semiempirical scaling laws (SL) [Phys. Rev. A 54 (1996) 4127]. However, the relative ratios among partial processes of DE, TE and QE are found to depend on collision energy, which suggests that the collision dynamics depends on the collision velocity. The limitation of velocity-independent character of ECBM, MCBM and SL is undoubtedly shown.

Transfer and detection of single electrons using metal-oxide-semiconductor field-effect transistors

A single-electron turnstile and electrometer circuit was fabricated on a silicon-on-insulator substrate. The turnstile, which is operated by opening and closing two metal-oxide-semiconductor field-effect transistors (MOSFETs) alternately, allows current quantization at 20 K due to single-electron transfer. Another MOSFET is placed at the drain side of the turnstile to form an electron storage island. Therefore, one-by-one electron entrance into the storage island from the turnstile can be detected as an abrupt change in the current of the electrometer, which is placed near the storage island and electrically coupled to it. The correspondence between the quantized current and the single-electron counting was confirmed.

Effects of phase-breaking on long-range charge transfer in DNA: Partially-coherent-tunneling model study

The mechanism of hole charge transfer in DNA of various lengths and sequences is investigated based on a partially coherent tunneling theory (Zhang et al., J Chem Phys 117:4578, 2002), where the effects of phase-breaking in adenine-thymine and guanine-cytosine base pairs are treated on equal foot. This work aims at providing a self-consistent microscopic interpretation for rate experiments on various DNA systems. We will also clarify the condition under which the simple superexchange-mediated-hopping picture is valid, and make some comments on the further development of present theory.

A partially incoherent rate theory of long-range charge transfer in deoxyribose nucleic acid

A quantum chemistry based Green's function formulation of long-range charge transfer in deoxyribose nucleic acid (DNA) double helix is proposed. The theory takes into account the effects of DNA's electronic structure and its incoherent interaction with aqueous surroundings. In the implementation, the electronic tight-binding parameters for unsolvated DNA molecules are determined at the HF/6-31G* level, while those for individual nucleobase-water couplings are at a semiempirical level by fitting with experimental redox potentials. Numerical results include that: (i) the oxidative charge initially at the donor guanine site does hop sequentially over all guanine sites; however, the revealed rates can be of a much weaker distance dependence than that described by the ordinary Ohm's law; (ii) the aqueous surroundings-induced partial incoherences in thymine/adenine bridge bases lead them to deviate substantially from the superexchange regime; (iii) the time scale of the partially incoherent hole transport through the thymine/adenine pi stack in DNA is about 5 ps. (C) 2002 American Institute of Physics.

有机质谱裂解规律及智能解析方法研究

本学位论文分为四个部分，第一部分报道了用串联质谱快速分析合成药物中的微量杂质成分以及分析中药材中的化学成分。第二部分报道了通过质谱和串联质谱发现并合成新型的PdPincer 催化剂，同时对其活性进行测试。第三部分为串联质谱自动解析软件的设计及应用。第四部分概述了应用在质谱中的各种碎裂方式。 第一部分首先总结了5-溴粉防己碱及其类似物的裂解规律，并以此为根据推测出2 个微量杂质的结构。随后针对无患子（Sapindus mukurossi Gatren.）中的皂苷成分，由ESI-QTOF 得到各个皂苷成份的高分辨质量数据进而得到其分子式，然后利用ESI-IT 电喷雾串联质谱对无患子总皂苷中各皂苷成分的结构进行进一步的鉴定。进而以同样的方式，先通过ESI-QTOF 得到黄山药（Dioscoreapanthaica）总皂苷中各个组分化合物的分子式，然后对已有的薯蓣皂苷标准品做串联质谱分析，以得到该类化合物的裂解规律并给出解析该类化合物的流程图。在此利用计算化学的方法讨论了离子的丰度与裂解活化能之间的关系。然后应用APCI-MS/MS 方法探讨了四对同分异构体和几个已知的化合物，并最后用液质联用对其进行确认，同时还给出了4 个未知化合物的可能结构。 第二部分报道通过质谱和串联质谱发现并合成新型的PdPincer 催化剂，同时对其活性进行测试。钯催化的交联反应是有机合成中C-C 键形成的最有效的方法，且硫脲是一类对空气和水都稳定的化合物，因此我们设计并合成了一系列的硫脲钯催化剂并得到了很好的催化活性。我们在对其中一类环状双硫脲化合物进行质谱实验的时候，在正离子模式下发现了反常的[M.H]+，通过串联质谱进一步确定了它是一种新型的PdPincer 结构。我们将其合成出来并通过X-ray 衍射实验确定了它的结构。同时测定其催化活性并与未形成pincer 的类似物进行比较发现该类化合物具有较宽的底物适用性。 第三部分为串联质谱自动解析软件的设计及应用。通过前面两部分的启示，独立设计开发了AuMass（1.0）。其算法是：先通过查找特殊的碎片离子，中性丢失或碎片离子质量差来确定某类化合物的骨架结构，然后利用该类化合物的自动解析流程来对其周边取代基进行确认。通过它快速地对白芍中的化学成分进行解析，并对未知的化合物进行了推测。为了增加它的解析能力，我又对其它类型的化合物裂解规律进行总结，并给出了自动解析流程。实践证明该软件具有相当好的应用价值。 第四部分综述了应用在质谱上的各类母离子的碎裂技术。这里包括了碰撞诱导裂解（CID）、光诱导碎裂（LID）、电子捕获裂解/电子转移裂解（ECD/ETD）、红外多光子解离（IRMPD）、黑体辐射解离（BIRD）和PQD 裂解技术。 This dissertation consists of four chapters. The first chapter reports the rapidanalysis of trace impurities from synthetical medicine and analysis of the chemicalconstitutents from Chinese herb medicines. The second chapter elaborates the studieson the discorvery and synthesis of new type of Pd Pincer catalyst by using MS andtandem MS together with the testing of its catalyst activity. The third chapter dwellson the designation and development of automatic tandem mass spectrometry analysissoftware. The last chapter presents a review on the dissociation technique of massspectrometry. The first chapter reports the rapid analysis of trace impurities from synthesismedicine and analysis of the chemical constitutents from Chinese herb medicines. The fission mechanism of 5-bromotetrandrine was obtained by analysis of the dissociationpathways of major product, by using which the possible structure of the two traceimpurties was assumed. There are lots of saponins in Sapindus mukurossi. Except forthe good spumescence and decontamination，it possesses the bioactivity of antigenand antitch. First of all, the high resolution mass information was obtained by ESI-QTOF. Hence the possible molecular formulars were acquired too. Then weconducted the further detection of the structures of its saponins by using ESI-ITtechnology. In the same manner, first the molecular formulars of every constituentfrom Dioscorea panthaica in total saponins were obtained by ESI-QTOF, and thenacquired the fission mechanism of this type of compounds by tandem massexperiment on a series of known and available saponins. In the same time, theanalysis flowchart was concluded. Here the relationship between the ion intensity andthe corresponding dissiociation activation energy was studied by computer chemistry.Then the four pairs of isomers were differentiated by APCI-MS/MS, as well as thecharacterization of known and unknown compounds. The assumption was confirmed by HPLC-MS/MS. Among them the possible structures of four unknown saponinswas presented. The second part was discovery and synthesis of a new type of Pd pincer catalystby MS and tandem MS. The coupling reaction catalyzed by Pd is the most effectivemethod in C-C formation in organic synthesis. Apart from that, thiourea is type ofcompounds that are stable to atmosphere and moisture. Hence we designed a series ofPd thiourea catalysts. Some of them show the excellent catalyst activity. The abnormalparent ion [M.H]+ was founded in positive ESI mode when we conduct some massspectrometry experiments on the bicyclical thiourea Pd complex. The structure wasproposed by mass and tandem mass spectrometry. Because it was a new type of pincer,we want to test its catalyst activity. So the Pd pincer was synthesized and the detailstructure was obtained by x-ray experiment. It shows the more fitness in catalysis ofSuzuki reaction by comparison with the analogue. The third chapter dwells on the design and development of automatic tandemmass spectrometry analysis software. Inspired by the former two chapters, theAuMass (version 1.0) was developed. Its algorithm is: first check the diagnostic ion,diagnostic neutral loss or diagnostic ions mass intervals in database to find out whatthe analyst’s skeleton belongs to, then identify the peripheral functional group by thecorresponding analysis flowchart. The chemical constituents of Paeonia lactiflorawere identified rapidly by using AuMass. To increase the analysis ability, the othertypes of compounds from Chinese herbs was concluded. Actually, the software isproven to have the much valuable application. The last chapter presented the review on the some kinds of fission technique ofmass spectrometry. It involves the collision induced dissociation (CID), laser induceddissociation (LID), electron capture dissociation/electron transfer dissociation(ECD/ETD), infrared multiple photons dissiociation, black body irraditiondissociation and PQD fission technique from Finnigan.

Relationship between charge transfer energies of Yb3+ and Sm3+ and crystal environmental factor

Relationship between charge transfer energies E-CT of Yb3+ and Sm3+ and environmental factors h(e) in various crystals was investigated using a dielectric chemical bond method. Both results show that they have an exponential relation E-CT = A+B exp(-kh(e)), but the exponential factors are different, which indicates that the interaction between the rare earth ions and environment is connected with the kind of rare earth ion. This result provides a method of determining charge transfer energies of Yb3+ and Sm3+ from a crystal structure.

Rational Design, Synthesis, and Optical Properties of Film-Forming, Near-Infrared Absorbing, and Fluorescent Chiromophores with Multidonors and Large Heterocyclic Acceptors

A new series of film-forming, low-bandgap chromophores (1a,b and 2a,b) were rationally designed with aid of a computational study., and then synthesized and characterized. To realize absorption and emission above the 1000 nm wavelength, the molecular design focuses on lowering the LUMO level by fusing common heterocyclic units into a large conjugated core that acts an electron acceptor and increasing the charge transfer by attaching the multiple electron-donating groups at the appropriate positions of the acceptor core. The chromophores have bandgap levels of 1.27-0.71 eV, and accordingly absorb at 746-1003 nm and emit at 1035-1290 nm in solution. By design, the relatively high molecular weight (up to 2400 g mol(-1)) and non-coplanar structure allow these near-infrared (NIR) chromophores to be readily spin-coated as uniform thin films and doped with other organic semiconductors for potential device applications. Doping with [6,6]-phenyl-C-61 butyric acid methyl ester leads to a red shift in the absorption on]), for la and 2a. An interesting NIR electrochromism was found for 2a, with absorption being turned on at 1034 nm when electrochemically switched (at 1000 mV) from its neutral state to a radical cation state. Furthermore, a large Stokes shift (256-318 nm) is also unique for this multidonor-acceptor type of chromophore.

Formation of Fullerooxazoles from C61HPh3-: The Regioselectivity of Heteroatom Additions

The formation of fullerooxazoles from C61HPh3- has been examined in benzonitrile (PhCN), m-methoxybenzonitrile (m-OCH3PhCN), m-tolunitrile (m-CH3PhCN), and o-tolunitrile (o-CH3PhCN), where cis-1 bisadducts wit h Ph-, m-OCH3Ph-, m-CH3Ph-, and o-CH3Ph-substituted cyclic imidate next to the phenylmethano are formed its evidenced by various characterizations. Interestingly, only regioisomers 2a-d with the oxygen atom bonded to C4/C5 and the nitrogen atom bonded to C3/C6 are generated its demonstrated by heteronuclear multiple bond coherence (HMBC) NMR, while the alternative regioisomers 3a-d, which have the oxygen and nitrogen atoms at C3/C6 and C4/C5, respectively, are not formed from the reactions, even though the DFT (density functional theory) calculations have predicted that the energy differences between the two types of regioisomers are very small, with regioisomers 3a-d actually having lower energies than 2a-d The results are rationalized by the charge distributions Of C61HPh3-, where computational calculations have shown that the negative charges on C4 and C5 are greater than those on C3 and C6, indicating that the exhibited site selectivity of heteroatoms is a result of the charge-directed addition process

Investigation on relationship between charge transfer position and dielectric definition of average energy gap in Eu3+-doped compounds

The dielectric definition of average energy gap E-g of the chemical bond has been calculated quantitatively in Eu3+-doped 30 lanthanide compounds based on the dielectric theory of chemical bond for complex structure crystals. The relationship between the experimental charge transfer (CT) energy of Eu3+ and the corresponding average energy gap E-g has been studied. The results show that the CT energy increases linearly with increasing of the average energy gap E-g. The linear model is obtained. It allows us to predict the CT position of Eu3+-doped lanthanide compounds with knowledge of the crystal structure and index of refraction. Applied to the Ca4GdO(BO3)(3):Eu and Li2Lu5O4(BO3)(3):Eu crystals, the predicted results of CT energies are in good agreement with the experimental values, and it can be concluded that the lowest CT energy in Li2Lu5O4(BO3)(3):Eu originates from the site of Lu1.

Dependence of charge transfer energy on crystal structure and composition in Eu3+-doped compounds

We report a method for estimating the positions of charge transfer (CT) bands in Eu3+-doped complex crystals. The environmental factor ( he) influencing the CT energy is presented. he consists of four chemical bond parameters: the covalency, the bond volume polarization, the presented charge of the ligand in the chemical bond, and the coordination number of the central ion. These parameters are calculated with the dielectric theory of complex crystals. The relationship between the experimental CT energies and calculated environmental factors was established by an empirical formula. The calculated values are in good agreement with the experimental results. Such a relationship was confirmed by detailed analysis. In addition, our method is also useful to predict the charge-transfer position of any other rare earth ion.

Studies on charge transfer across the micro-liquid/liquid interface supported at a double-barrel micropipette

In this paper, the charge transfer across the micro-liquid/liquid interface supported at the orifice of a double-barrel micropipette, namely, a theta-pipette, is reported. Simple ion transfer(TMA(+)), facilitated ion transfer (potassium ion transfer facilitated by DB18C6), and electron transfer (ferrocene and ferri/ferrocyanide system) have been investigated by cyclic voltammetry. The experimental results show that a very thin aqueous film, linking both barrels filled with the aqueous solution and the organic solution respectively, can spontaneously be formed on the outer glass surface of such a double-barrel micropipette to construct a micro-liquid/liquid interface, which provides the asymmetry of diffusion field. Such device is demonstrated experimentally which can be employed as one of the simplest electrochemical cells to investigate the charge transfer across the liquid/liquid interface.

Charge transfer across the water/nitrobenzene interface by three-electrode system

A droplet of aqueous solution containing a certain molar ratio of redox couple is first attached onto a platinum electrode surface, then the resulting drop electrode is immersed into the organic solution containing very hydrophobic electrolyte. Combined with reference and counter electrodes, a classical three-electrode system has been constructed, Ion transfer (IT) and electron transfer (ET) are investigated systematically using three-electrode voltammetry. Potassium ion transfer and electron transfer between potassium ferricyanide in the aqueous phase and ferrocene in nitrobenzene are observed with potassium ferricyanide/potassium ferrocyanide as the redox couple. Meanwhile, the transfer reactions of lithium, sodium, potassium, proton and ammonium ions are obtained with ferric sulfate/ferrous sulfate as the redox couple. The formal transfer potentials and the standard Gibbs transfer energy of these ions are evaluated and consistent with the results obtained by a four-electrode system and other methods.