Heterojunction solar cells with n-type nanocrystalline silicon emitters on p-type c-Si wafers

Hydrogenated nanocrystalline silicon (nc-Si:H) n-layers have been used to prepare heterojunction solar cells on flat p-type crystalline silicon (c-Si) wafers. The nc-Si:H n-layers were deposited by radio-frequency (RF) plasma enhanced chemical vapor deposition (PECVD), and characterized using Raman spectroscopy, optical transmittance and activation energy of dark-conductivity. The nc-Si:H n-layers obtained comprise fine grained nanocrystallites embedded in amorphous matrix, which have a wider bandgap and a smaller activation energy. Heterojunction solar cells incorporated with the nc-Si n-layer were fabricated using configuration of Ag (100 nm)/1T0 (80 nm)/n-nc-Si:H (15 nm)/buffer a-Si:H/p-c-Si (300 mu m)/Al (200 nm), where a very thin intrinsic a-Si:H buffer layer was used to passivate the p-c-Si surface, followed by a hydrogen plasma treatment prior to the deposition of the thin nanocrystalline layer. The results show that heterojunction solar cells subjected to these surface treatments exhibit a remarkable increase in the efficiency, up to 14.1% on an area of 2.43 cm(2). (c) 2006 Elsevier B.V. All rights reserved.

On the acid-base stability of Keggin Al-13 and Al-30 polymers in polyaluminum coagulants

The acid-base stabilities of Al-13 and Al-30 in polyaluminum coagulants during aging and after dosing into water were studied systematically using batch and flow-through acid-base titration experiments. The acid decomposition rates of both Al-13 and Al-30 increase rapidly with the decrease in solution pH. The acid decompositions of Al-13 and Al-30 with respect to H+ concentration are composed of two parallel first-order and second-order reactions, and the reaction orders are 1.169 and 1.005, respectively. The acid decomposition rates of Al-13 and Al-30 increase slightly when the temperature increases from 20 to ca. 35 A degrees C, but decrease when the temperature increases further. Al-30 is more stable than Al-13 in acidic solution, and the stability difference increases as the pH decreases. Al-30 is more possible to become the dominant species in polyaluminum coagulants than Al-13. The acid catalyzed decomposition and followed by recrystallization to form bayerite is one of the main processes that are responsible for the decrease of Al-13 and Al-30 in polyaluminum coagulants during storage. The deprotonation and polymerization of Al-13 and Al-30 depend on solution pH. The hydrolysis products are positively charged, and consist mainly of repeated Al-13 and Al-30 units rather than amorphous Al(OH)(3) precipitates. Al-30 is less stable than Al-13 upon alkaline hydrolysis. Al-13 is stable at pH < 5.9, while Al-30 lose one proton at the pH 4.6-5.75. Al-13 and Al-30 lose respective 5 and 10 protons and form [Al-13] (n) and [Al-30] (n) clusters within the pH region of 5.9-6.25 and 5.75-6.65, respectively. This indicates that Al-30 is easier to aggregate than Al-13 at the acidic side, but [Al-13] (n) is much easier to convert to Alsol-gel than [Al-30] (n) . Al-30 possesses better characteristics than Al-13 when used as coagulant because the hydrolysis products of Al-30 possess higher charges than that of Al-13, and [Al-30] (n) clusters exist within a wider pH range.

全同1，2－聚丁二烯的合成及用~(13)C-NMR方法研究1，2－聚丁二烯的序列结构

采用Cr／Al催化体系，成功地合成了全同1，2－聚丁二烯（PBD），并用DSC方法、X－射线衍射、红外光谱及~(13)C－NMR的方法进行结构与物性测定，得如下结果：全同1，2－PBD的熔点为124.3℃；三角晶系中，分子链成了螺旋，晶胞参数为a＝17.3A，c＝ 6.5A；在红外光谱中，其特征谱带出现在694.4 cm~(-1)处；在~(13)C－NMR谱中仅出现四条谱峰，其化学位移分别为142.51、111.56、39.26、37.43 ppm。全同1，2－PBD的~(13)C－NMR谱提供的实验数据表明，在~(13)C－NMR谱中1，2－PBD－CH二碳十个五元组谱峰的归属是有别于Elgert、Kumar已有的归属。它属于一种新的归属，与半经验方法所推演的结果相符。它恰巧同聚丙烯侧甲基五元组谱峰的归属一致。采用半经验方法研究了1，2－PBD的~(13)C－NMR增中CH二碳五元组、CH_2－碳四元组及六元组共振谱峰，同时讨论了模型链的链长、温度以及立构序列的排列对各立构序列键概率的影响，求得了相应的r值。同时采用经验方法对1，2－PBD的~(13)C－NMR谱中CH_2=碳、CH－碳五元组及CH_2－碳四元组谱峰做了归属。两种方法对CH_2－碳谱峰的归属得到了一致的结果。

LIPID MICRORESISTOR AS MIMICKING OLFACTORY SENSOR - THE RULE OF THE RESPONSE OF LIPIDS TO C-1-C-4 ALCOHOLS

Phosphatidylcholine (PC) and six other PC-similar lipids are coated on interdigital electrodes, IEs, as sensitive membranes. Eight alcohols (C-1-C-4) are tested in a flow system at room temperature. It is found that all responses are log(response)-log(concentration) linear relations. These results agree with Steven's law in psychophysics. Moreover, the thresholds of the sensors are coincident with human olfactory thresholds. The authors have analysed the data of the lipid hypothesis suggested by Kurihara et al. We have found that this hypothesis is also in agreement with Steven's law. Lipid microresistors are real mimicking olfactory sensors. A definition of an olfactory sensor is suggested.

INVESTIGATION OF BURIED ALN LAYERS FORMED BY NITROGEN IMPLANTATION INTO AL

The composition and microstructure of buried layers of AlN formed by high energy N+ ion implantation into polycrystalline Al have been determined. Both bulk and evaporated thin films of Al have been implanted with 100 and 200 keV N+ ions to doses of up to 1.8 x 10(18)/cm2. The layers have been characterised using SIMS, XTEM, X-ray diffraction, FTIR, RBS and in terms of their microhardness. It is found that, for doses greater than the critical dose, buried, polycrystalline AlN layers are formed with preferred (100) or (002) orientations, which are sample specific. With increasing dose the nitrogen concentration saturates at the value for stoichiometric AlN although the synthesised compound is found to be rich in oxygen.

Deep electron states in n-type Al-doped ZnS1-xTex grown by molecular beam epitaxy

Capacitance-voltage, photoluminescence (PL), and deep level transient spectroscopy techniques were used to investigate deep electron states in n-type Al-doped ZnS1-xTex epilayers grown by molecular beam epitaxy. The integrated intensity of the PL spectra obtained from Al-doped ZnS0.977Te0.023 is lower than that of undoped ZnS0.977Te0.023, indicating that some of the Al atoms form nonradiative deep traps. Deep level transient Fourier spectroscopy (DLTFS) spectra of the Al-doped ZnS1-xTex (x=0, 0.017, 0.04, and 0.046, respectively) epilayers reveal that Al doping leads to the formation of two electron traps 0.21 and 0.39 eV below the conduction band. DLTFS results suggest that in addition to the roles of Te as a component of the alloy as well as isoelectronic centers, Te is also involved in the formation of an electron trap, whose energy level with respect to the conduction band decreases as Te composition increases. Our results show that only a small fraction of Al atoms forms nonradiative deep defects, indicating clearly that Al is indeed a very good donor impurity for ZnS1-xTex epilayers in the range of Te composition being studied in this work. (C) 1997 American Institute of Physics. [S0021-8979(97)08421-1].

分子束外延生长Al掺杂n型ZnS_（1-x）Tex的类DX中心

应用光致发光(PL)、电容-电压(C-V)、深能级瞬态谱(DLTS)和光电导(PC)技术系统研究Al掺杂ZnS_(1-x)Te_x中与Al有关的类DX中心。实验结果表明，ZnS_(1-x)Te_x中存在与Ⅲ－Ⅴ族半导体DX中心相类似的性质。获得与Al有关的类DX中心光离化能E_i(～1.0eV和2.0eV)和发射势垒E_e(0.21eV和0.39eV)，这表明ZnS_(1-x)Te_x大晶格弛豫的出现是由类DX中心引起。

Optical properties of self-assembled ternary In(GA/Al)As quantum dots on (100) and (N 1 1)B InP substrates

In this paper, we investigated the self-assembled quantum dots formed on (100) and (N11)B (N = 2, 3, 4, 5) InP substrates by molecular beam epitaxy (MBE). Two kinds of ternary QDs (In0.9Ga0.1As and In0.9Al0.1As QDs) are grown on the above substrates; Transmission electron microscopy (TEM) and photoluminescence (PL) results confirm QDs formation for all samples. The PL spectra reveal obvious differences in integral luminescence, peak position, full-width at half-maximum and peak shape between different oriented surfaces. Highest PL integral intensity is observed from QDs on (411)B surfaces, which shows a potential for improving the optical properties of QDs by using high-index surface. (C) 2000 Elsevier Science B.V. All rights reserved.

High power 980 nm Al-free strained quantum-well lasers for erbium-doped fiber amplifiers

In this paper, we reported on the fabrication of 980 nm InGaAs/InGaAsP strained quantum-well (QW) lasers with broad waveguide. The laser structure was grown by low-pressure metalorganic chemical vapor deposition on a n(+)- GaAs substrate. For 3 mu m stripe ridge waveguide lasers, the threshold current is 30 mA and the maximum output power and the output power operating in fundamental mode are 350 mW and 200 mW, respectively. The output power from the single mode fiber is up to 100 mW, the coupling efficiency is 50%. We also fabricated 100 mu m broad stripe coated lasers with cavity length of 800 mu m, a threshold current density of 170 A/cm(2), a high slope efficiency of 1.03 W/A and a far-field pattern of 40 x 6 degrees are obtained. The maximum output power of 3.5 W is also obtained for 100 mu m wide coated lasers. (C) 2000 Elsevier Science B.V. All rights reserved.

~(19)F+~(27)Al耗散反应产物激发函数的长程关联

在中国原子能科学研究院的HI-13串列静电加速器上完成了19F+27Al耗散反应产物的激发函数测量。束流19F的入射能量从110.25MeV到118.75MeV,步长250keV,测量了实验室系+57°,+31°,-15°和-29°出射的类弹产物B,C,N,O,F和Ne的激发函数。观测到激发函数具有耗散反应的特征涨落结构,分析了激发函数之间的长程角度关联以及强烈的电荷数关联。

~(19)F+~(27)Al耗散反应中双核系统的转动与形变

测量了19F+27Al耗散反应产物B,C,N,O,F和Ne的激发函数,入射束流的能量从110．25MeV 到118．75MeV,能量步长为250keV．从产物的能量自关联函数中提取了反应中所形成的中间双核系统的转动惯量,与相粘模型计算的刚体转动惯量相比较,结果表明形成的双核系统有大的形变．

~(19)F+~(27)Al耗散反应产物截面测量中的不重复性

在中国原子能科学研究院的HI-13串列静电加速器上完成了114MeV和118．75MeV的19F+27Al 耗散反应产物B,C,N,O,F,Ne,Na和Mg的微分截面测量．条形27Al同位素靶的大小尺寸为 10mm×50mm,平均厚度约67μg／cm2．固定入射束流19F的能量,通过移动靶位,先后轰击了靶上20个不同的位置．实验结果表明,在弹靶系统、入射能量以及探测系统都相同的多次独立的微分截面测量中,截面的涨落不呈现高斯型几率分布．截面测量的这种不重复现象难以用有限计数率的统计性质来解释．