Doped polycrystalline 3C-SiC films deposited by LPCVD for radio-frequency MEMS applications

Polycrystalline 3C-SiC films are deposited on SiO2 coated Si substrates by low pressure chemical vapour deposition (LPCVD) with C3H8 and SiH4 as precursors. Controlled nitrogen doping is performed by adding NH3 during SiC growth to obtain the low resistivity 3C-SiC films. X-ray diffraction (XRD) patterns indicate that the deposited films are highly textured (111) orientation. The surface morphology and roughness are determined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface features are spherulitic texture with average grain size of 100 nm, and the rms roughness is 20nm (AFM 5 x 5 mu m images). Polycrystalline 3C-SiC films with highly orientational texture and good surface morphology deposited on SiO2 coated Si substrates could be used to fabricate rf microelectromechanical systems (MEMS) devices such as SiC based filters.

Influence of the rapid thermal annealing on the properties of thin a-Si films

The variation of the structure, morphology and the electrical properties of thin amorphous silicon films caused by Rapid Thermal Annealing is studied. The films annealed at 1200degreesC for 2 minutes change their structure to polycrystalline and as a result their resistivity decreases by 4 orders of magnitude. Due to the small thickness of the as deposited amorphous silicon the obtained poly-Si is strongly irregular and has many discontinuities in its texture.

SiO2/Ta interface reaction in magnetic multilayers and its influence on Ta buffer layers

Ta is often used as a buffer layer in magnetic multilayers. In this study, Ta/Ni81Fe19/Ta multilayers were deposited by magnetron sputtering on sing-crystal Si with a 300-nm-thick SiO2 film. The composition and chemical states at the interface region of SiO2/Ta were studied using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique. The results show that there is an 'inter-mixing layer" at the SiO2/Ta interface due to a thermodynamically favorable reaction: 15 SiO2 + 37 Ta = 6 Ta2O5 + 5 Ta5Si3. Therefore, the Ta buffer layer thickness used to induce NiFe (111) texture increases.

基于Gabor小波的着色及纹理合成算法

着色和纹理合成是图形图像中的两类基本研究课题。前者需根据用户定义的彩色笔触信息，自动对黑白照片、电影或者漫画染上颜色；后者则需根据用户输入的样本纹理，经计算得出与样本纹理视觉上近似的结果纹理。这两类课题都有广泛的应用背景。如着色常常用于给经典的黑白电影或者照片自动上色，解决现在的染色工序中存在的需要大量人工交互的难题；而纹理合成常用于电影和电子游戏的地形地貌、织物、头发等等纹理的自动生成。 这两大类问题都需要分析纹理特征，并且依赖于分析结果的准确性。Gabor小波滤波器与人眼的视觉感受野相当吻合，用它来分析纹理得到的结果比较精确。鉴于此，本文把Gabor小波应用到了着色问题和纹理合成中。对于着色问题，本文用基于Gabor小波的特征向量重新定义邻居关系，然后用最优化方法迭代地对照片和卡通染色。相比以往的算法，本算法具有用户交互少、效果好、算法简单稳健的优点，并且算法允许用户逐步地添加色彩细节。对于纹理合成，本文用基于Gabor小波的特征向量来预计算K-Coherence候选集，提高了K-Coherence算法的准确性，从而改进了纹理合成的最终效果。 本文提出的算法是天然并行的，因而可利用GPU加速，做到实时计算。

砂粒含量对土壤水分蓄持能力影响模拟试验研究

通过人工配制不同质地土壤,测定土壤水分特征曲线,研究了土壤中砂粒含量对其水分蓄持能力的定量影响。结果表明:(1)砂粒含量对土壤水分蓄持能力有较大影响,土壤持水能力随砂粒含量增加递减,表征土壤持水能力的水分特征曲线Gardner模型参数及表征土壤饱和含水量的Van Genuchten模型参数均随砂粒含量增加逐渐减小。(2)砂粒含量对土壤比水容量有较大影响,试验土壤在任一吸力水平下的比水容量值均随其砂粒含量增加递减。(3)试验土壤饱和含水量与砂粒含量呈线性关系,田间持水量、凋萎系数与砂粒含量都呈开口向下抛物线右半段的关系。(4)试验土壤有效水、迟效水含量随砂粒含量增加递减,二者与砂粒含量均呈开口向下抛物线右半段的关系。易效水含量与砂粒含量呈开口向上抛物线关系。

黄土高原坡地密植枣园土壤质地与肥力状况分析

采用田间取样与实验室分析相结合的方法,研究了黄土高原坡地密植枣园土壤质地与肥力状况。结果表明,坡地枣园土壤肥力低,氮、磷严重缺乏,钾相对丰富,土壤属于砂壤土,通气性强,保肥、保水性差。0~60 cm土壤有机质含量为1.687~5.002 mg/kg;全氮为0.072~0.316 g/kg;硝酸盐为2.325~16.846 g/kg;铵态氮为1.187~2.146 g/kg,速效磷为0.270~2.480 mg/kg,速效钾为51.9~169.1 mg/kg,并且含量均随剖面向下减少。颗粒组成大部分为粉砂粒,含量一般在65.75%~68.98%;随有机质含量升高,0.25~0.05 mm微团聚体数量呈上升趋势,二者为正相关;<0.05 mm微团聚体含量则逐渐下降,二者呈负相关。黄土高原坡地密植枣园土壤肥力总体水平很低。除了速效钾为中等级外,有机质、全氮、碱解氮、速效磷均为很低等级。

黏粒质量分数对土壤水分蓄持能力影响的模拟试验

通过人工配制不同质地土壤,测定土壤水分特征参数,研究土壤中黏粒质量分数对其水分蓄持能力的定量影响。结果表明:1)黏粒质量分数对土壤水分蓄持能力有较大影响,土壤持水能力随黏粒质量分数增加而递增。2个水分特征曲线模型——Gardner模型及van Genuchten模型中,表征土壤持水能力的参数均随黏粒质量分数增加而增大。2)黏粒质量分数对土壤比水容量有较大影响,试验土壤在任一水吸力水平下的比水容量值均随其黏粒质量分数增大而增大。3)试验土壤饱和含水量、田间持水量分别与黏粒质量分数呈指数、对数正相关,凋萎系数与黏粒质量分数呈指数正相关。4)试验土壤有效水、迟效水含量随黏粒质量分数增加呈先升高后降低趋势,二者与黏粒质量分数均呈抛物线关系,最高点分别出现在黏粒质量分数为35.9%和35.8%处,易效水含量与黏粒质量分数相关性不显著。研究结果可为黄土区土壤水分蓄持机制进一步研究提供一定理论依据。

容重对土壤水分入渗能力影响模拟试验

通过人工改变土壤颗粒级配,配制典型砂壤、中壤、黏壤,并设置不同容重水平,用土柱积水入渗模拟了土壤容重对其入渗能力的影响,为土壤改良和促进天然降水转化利用提供理论依据。结果表明,容重对土壤入渗能力有较大影响。试验土壤入渗能力随容重增大递减,3种典型土壤稳定入渗速率与容重均呈对数负相关,砂壤120min累积入渗量与容重呈幂函数负相关,中壤、黏壤则呈线性负相关。考斯加科夫入渗模型中,表征初始入渗速率的参数随容重增大递减,表征入渗能力衰减速度的参数则随容重增大递增,说明土壤初始入渗能力随容重增大递减,入渗能力衰减速度随容重增大递增。

草地覆盖坡面流水动力参数的室内降雨试验

为研究两种典型黄土的坡面流水力特性变化规律,进行了室内人工降雨试验。以草地盖度为主要影响因子,土壤质地和雨强为辅助影响因子进行分析。结果表明:同一盖度下,随雨强逐渐增大,流量和流速也随之增加;当盖度增加时,流量和流速随之减小。流速随降雨历时的延长而逐渐增大;当雨强增大时,流速曲线整体抬高;当覆盖度逐渐增大,流速曲线整体降低。平均水深随流速增大而减小;同一雨强下,盖度增加时氟汝德数Fr随之增加,雷诺数Re降低,而Darcy-Weisbach阻力系数f及曼宁粗糙系数n均大致呈增加趋势;对同一盖度,雨强增加Fr随之减小,Re逐渐增加,同时f和n均随之减小。因此草地覆盖度增加将改善坡面流水力性质,总体上减小了坡面流速,增加了阻力和粗糙度。

Structures of energy spectrum and persistent currents in mesoscopic rings with radial potential barrier in magnetic field

The energy spectrum and the persistent currents are calculated for finite-width mesoscopic annular structures with radial potential barrier in the presence of a magnetic field. The introduction of the tunneling barrier leads to the creation of extra edge states around the barrier and the occurrence of oscillatory structures superimposed on the bulk Landau level plateaus in the energy spectrum. We found that the Fermi energy E-F increases with the number of electrons N emerging many kinks. The single eigenstate persistent current exhibits complicated structures with vortex-like texture, ''bifurcation'', and multiple ''furcation'' patterns as N is increased. The total currents versus N display wild fluctuations.

Influence of the rapid thermal annealing on the properties of thin a-Si films

The variation of the structure, morphology and the electrical properties of thin amorphous silicon films caused by Rapid Thermal Annealing is studied. The films annealed at 1200degreesC for 2 minutes change their structure to polycrystalline and as a result their resistivity decreases by 4 orders of magnitude. Due to the small thickness of the as deposited amorphous silicon the obtained poly-Si is strongly irregular and has many discontinuities in its texture.

Segmented All-Platinum Nanowires with Controlled Morphology through Manipulation of the Local Electrolyte Distribution in Fluidic Nanochannels during Electrodeposition

Synthesis of segmented all-Pt nanowires is achieved by a template-assisted method. The combination of a suitably chosen electrolyte/template system with pulse-reverse electrodeposition allows the formation of well-defined segments linked to nanowires. Manipulation of the morphology is obtained by controlling the electrokinetie effects on the local electrolyte distribution inside the nanochannels during the nanowire growth process, allowing a deviation from the continuously cylindrical geometry given by the nanoporous template. The length of the segments can be adjusted as a function of the cathodic pulse duration. Applying constant pulses leads to segments with homogeneous shape and dimensions along most of the total wire length. X-ray diffraction demonstrates that the preferred crystallite orientation of the polycrystalline wires varies with the average segment length. The results are explained considering transitions in texture formation with increasing thickness of the electrodeposit. A mechanism of segment formation is proposed based on structural characterizations. Nanowires with controlled segmented morphology are of great technological importance, because of the possibility to precisely control their substructure as a means of tuning their electrical, thermal, and optical properties. The concept we present in this work for electrodeposited platinum and track-etched polycarbonate membranes can be applied to other selected materials as well as templates and constitutes a general method to controlled nanostructuring and synthesis of shape controlled nanostructures.

神府东胜煤田复垦区土壤入渗特性的试验研究

土壤入渗性能是最基本的土壤物理特性之一。复垦区土壤的结构组成复杂,入渗特性有别于非矿区土壤。本文以神府东胜煤田马家塔复垦区为研究对象,利用圆盘入渗仪分别测定了复垦区乔木、林地、荒地、灌木林地和草地的土壤入渗特性,用经典统计学方法对复垦区土壤入渗性能的空间变异性进行了分析。实测结果表明,不同土地利用方式下的土壤入渗特性有较大的差异;在测定范围内,乔木林地、荒地、草地和灌木林地的稳定入渗率均表现出0 cm>—3 cm>—15 cm的规律性,其中草地稳定入渗率随吸力的变化更明显。研究表明:乔木林地稳定入渗率和累积入渗量的变异系数分别为0.58和0.49.属于中等变异。