Si-based resonant-cavity-enhanced photodetector

Resonant-cavity-enhanced (RCE) photodetectors have been demonstrated to be able to improve the bandwidth-efficiency product. We report one top-illumination and one bottom-illumination SiGe/Si multiple quantum-well (MQW) RCE photodetectors fabricated on a separation-by-implanted-oxygen (SIMOX) wafer operating near 1300nm, The buried oxide layer in SIMOX is used as a mirror to form a vertical cavity with the silicon dioxide/silicon Bragg reflector deposited on the top surface. A peak responsivity with a reverse bias of 5V is measured 10.2mA/W at 1285nm, and a full-width at half maximum of 25nm for the top-illumination RCE photodetector, and 19mA/W at 1305nm, and a full-width at half maximum of 14nm for the bottom-illumination one. The external quantum efficiency of the bottom-illumination RCE photodetector is up to 2.9% at 1305nm with a reverse bias of 25V. The responsivity of the bottom-illumination RCE photodetector is improved by two-fold compared with that of the top-illumination one.

Experimental study on tunable external cavity photodetectors

In this paper, an experiment on tunable resonant cavity enhanced (RCE) photodetector with external cavity is reported. It is the first time to realize a tunable RCE photodetector in China. A tuning range about 10 nm has been obtained and further extension is expected. Corresponding theoretical analysis and discussions are presented. (C) 2000 Elsevier Science B.V. All rights reserved.

Stability improvement of selective oxidation during the fabrication of InGaAs/GaAs vertical cavity surface emitting laser

The effects of the carrier gas flow and water temperature on the oxidation rate for different reaction temperatures were investigated. The optimum conditions for stable oxidation were obtained. Two mechanisms of the oxidation process are revealed. One is the flow-controlling process, which is unstable. The other is the temperature-controlling process, which is stable. The stable region decreases for higher reaction temperatures. The simulation results for the stable oxidation region are also given. With optimum oxidation conditions, the stability and precision of the oxidation can be dramatically improved.

High electrical-to-green efficiency high stability intracavity-frequency-doubled Nd:YAG-LBO QCW 532 nm laser with a straight cavity

An electrical-to-green efficiency of more than 10% was demonstrated by intracavity-frequency-doubling a Q-switched diode-side-pumped Nd:YAG laser with a type II lithium triborate (LBO) crystal in a straight plano-concave cavity. An average power of 69.2 W at 532 nm was generated when electrical input power was 666 W. The corresponding electrical-to-green conversion efficiency is 10.4%. To the best of our knowledge, this is the highest electrical-to-green efficiency of second harmonic generation laser systems with side-pumped laser modules, ever reported. At about 66 W of green output power, the power fluctuation over 4 hours was better than +/-0.86%.

Microphotoluminescence investigation of InAs quantum dot active region in 1.3 mu m vertical cavity surface emitting laser structure

Microphotoluminescence (mu-PL) investigation has been performed at room temperature on InAs quantum dot (QD) vertical cavity surface emitting laser (VCSEL) structure in order to characterize the QD epitaxial structure which was designed for 1.3 mu m wave band emission. Actual and precise QD emission spectra including distinct ground state (GS) and excited state (ES) transition peaks are obtained by an edge-excitation and edge-emission (EEEE) mu-PL configuration. Conventional photoluminescence methods for QD-VCSELs structure analysis are compared and discussed, which indicate the EEEE mu-PL is a useful tool to determine the optical features of the QD active region in an as-grown VCSEL structure. Some experimental results have been compared with simulation results obtained with the aid of the plane-wave admittance method. After adjustment of epitaxial growth according to EEEE mu-PL measurement results, QD-VCSEL structure wafer with QD GS transition wavelength of 1300 nm and lasing wavelength of 1301 nm was obtained.

Broadly Tunable Grating-Coupled External Cavity Laser With Quantum-Dot Active Region

A broadly tunable and high-power grating-coupled external cavity laser with a tuning range of more than 200 nm and a similar to 200-mW maximum output power was realized, by utilizing a gain device with the chirped multiple quantum-dot (QD) active layers and bent waveguide structure. The chirped QD active medium, which consists of QD layers with InGaAs strain-reducing layers different in thickness, is beneficial to the broadening of the material gain spectrum. The bent waveguide structure and facet antireflection coating are both effective for the suppression of inner-cavity lasing under large injection current.

角蟾科（Megophryidae; Anura）蝌蚪的形态多样性和生态适应

角蟾科（Megophryidae）是以角蟾属（Megophrys Kuhl and Van Hasselt, 1822）为模式属而建立的，隶于无尾目（Anura），变凹型亚目（Anomocoela）。角蟾科包括2 亚科11 属142 种，分布于东洋界，从巴基斯坦、中国西部向东直到菲律宾和苏达群岛；中国有9 属75 种分布于华中和华南地区。角蟾科被认为是原始的两栖动物之一，其分类学、系统学、生态学、动物地理学的研究均深受中外科学家的瞩目。近年来，通过形态学、古生物学、细胞学、生态学、支序系统学的研究，角蟾科的分类与系统学研究取得了较大进展。与成体形态和分子系统学研究结果相比较，蝌蚪的研究存在更多的问题和挑战，尚需深入研究：（1）角蟾科蝌蚪的形态多样性分析；（2）角蟾科的系统发育关系与蝌蚪的演化，以及口漏斗的起源；（3）角蟾科蝌蚪表型分化与栖息环境和觅食行为的适应演化。针对上述问题，本文对角蟾科9 属30 种蝌蚪的形态特征，包括外部宏观形态和口器外部结构特征、口器内部显微结构、唇齿和角质颌的亚显微结构作了深入细致、多层次的比较研究；通过12s rRNA 和cytochrome b 基因构建最大简约树，采用贝叶斯系统发育进行分析，蝌蚪型的演化采用祖先性状的重建方法分析；得到如下结论：1）初步将角蟾科蝌蚪分为4 种类型；并且建立了2 种新的角蟾科蝌蚪类型。A 型：拟髭蟾型蝌蚪，该型蝌蚪包括拟髭蟾属、髭蟾属、齿蟾属和齿突蟾属的物种；B 型：新类型，掌突蟾型蝌蚪，该型蝌蚪在本文中包括掌突蟾属、小臂蟾属的物种；C 型：新类型，短腿蟾型蝌蚪，一种特化类型，该型蝌蚪在本文中仅包括短腿蟾属的物种；D 型：角蟾型蝌蚪，该型蝌蚪在本文中包括无耳蟾属、小口拟角蟾属和异角蟾属的物种。2）对角蟾科的分类进行了修订：（1）支持角蟾科两个亚科的分类系统；（2）角蟾亚科包括拟角蟾属、异角蟾属、无耳蟾属和短腿蟾属；该亚科形态差异小，系统学关系比较复杂，暂不作族级分类的再划分；（3）拟髭蟾亚科分为2 个族：拟髭蟾族，该族物种具有类型A 的蝌蚪，包括4 个属：拟髭蟾属、髭蟾属、齿蟾属、齿突蟾属；掌突蟾族，该族物种具有类型B 的蝌蚪，包括2 个属：掌突蟾属和小臂蟾属。3）结合分子系统进化关系探讨了4 种蝌蚪类型的演化。（1）角蟾科蝌蚪的最近共同祖先来自于一类具有拟髭蟾型蝌蚪性状的蝌蚪；（2）掌突蟾型蝌蚪和角蟾亚科的蝌蚪是由具有拟髭蟾型蝌蚪性状的祖先蝌蚪分别演化而来；（3）短腿蟾型蝌蚪是角蟾型蝌蚪的一种特化类型；（4）外群蝌蚪具有与拟髭蟾型蝌蚪相似的性状，进一步印证了类拟髭蟾型蝌蚪是角蟾科蝌蚪的最近共同祖先的假说；（5）具有口漏斗的蝌蚪类型是由不具口漏斗的蝌蚪类型演化而来，在角蟾科中口漏斗是一种衍生性状。4）分析了角蟾科四种蝌蚪类型与栖息环境的适应演化。（1）角蟾科蝌蚪的口部和体形的变化反映了该科蝌蚪由缓流向类似静水生境的回水凼的渐变式适应，角蟾科蝌蚪的形态显示了多方面的适应变化；（2）随着蝌蚪类型由A 向D的演化，当水速较大时，拟髭蟾型的蝌蚪营流水攀吸型生活方式；当水速递减时，掌突蟾型蝌蚪营流水附着型生活方式；当水速进一步递减时，具有较小口漏斗的短腿蟾型蝌蚪和具有大漏斗的角蟾型蝌蚪营流水浮泳型生活。角蟾科蝌蚪对于水流递减的适应演化说明蝌蚪的生态学适应是具有进化意义的；（3）蝌蚪口器内部结构的分化揭示了蝌蚪和食性的适应关系，蝌蚪以口部的唇齿与角质颌刮取或吞吸水中的物质，然后，通过口乳突有选择地过滤进入口腔中食物。拟髭蟾亚科蝌蚪的唇齿多而窄，唇齿间距宽，颌鞘粗而稀，反映了其植食性为主的特点；它们的舌前乳突一般为指状，在口腔入口处所占面积小，其机械过滤的作用很多被唇齿和角质颌分担了；而角蟾亚科的蝌蚪，其角质颌弱，其舌前乳突一般为匙状，几乎填满了口腔入口处，因此舌前乳突起了主要的机械过滤作用。The family Megophryidae is the largest and most diverse families inArchaeobatrachia, and most of its species occur in India, Pakistan, and eastward intoChina, Southeast Asia, Borneo and the Philippines to the Sunda Islands. Currently thefamily includes 142 species have been grouped into two subfamilies, Megophryinaeand Leptobrachiinae. The mountains of central and southern China are rich in speciesof Megophryidae, 75 species belong to 9 genera and two subfamilies.The family was supposed to be ideal materials of studies in many fields of biology,such as taxonomy, evolution, systematics, ecology, and biogeography. Recently, therehave a great development in taxonomy and systematics of megophryids throughstudied by morphology, paleontology, cytology, ecology, and cladistics. However,larvae of megophryids were generally unknown, although the tadpoles might be veryimportant for above studies.In this paper, we examined the evolutionary scenario of the tadpoles’ morphologyin the context of a phylogenetic framework. Our objectives are (1) to evaluate thedivergence of larval body shape and oral discs in the family Megophryidae, (2) toexplore the evolutionary trends of the larvae in megophryidae, and test if thefunnel-shaped oral disc is apomorphic, and (3) to explore the relationship of the larvalstructure, diet and microhabitat.We examined larval morphology of 30 megophryid species, the larval body shape,oral discs, the buccopharyngeal cavity, and jaw sheaths and denticles of the Chinesemegophryid frogs were re-examined. We constructed a phylogeny of the species on thebasis of published mitochondrial cytochrome b and 16S rRNA gene segments usingpartitioned Bayesian analyses. Furthermore, hypothetical changes of larval morphologywere inferred using parsimony principle on the phylogeny. The results showed that:1) Four tadpole types in Megophryidae. The larval morphological charactersseries in Chinese megophryids fall into four general categories according to the bodyshape and oral discs: (A) Leptobrachiini type, species from genera Leptobrachium,Oreolalax, Scutiger and, Vibrissaphora share this type of tadpoles. (B) Leptolalax type,species of genus Leptolalax have this type of tadpoles. (C) Brachytarsophrys type,species of the genus Brachytarsophrys have this type of tadpoles. (D) Megophryinitype, species of the genera Atympanophrys, Ophryophryne, and Xenophrys share this type of tadpoles. Of which B and C are two novel types.2）Taxonomic implications. The present study leads us to reconsider the generalclassification of tribes attributed to members of Megophryidae. More specifically,concerning the phylogenetic relationships and the two novel tadpole types describedherein, we propose a provisional taxonomy for the family but suggest that further taxasampling of other megophryids be performed to confirm this taxonomic change. TheMegophryidae is composed of two subfamilies (Leptobrachiinae and Megophryinae).The Leptobrachiinae was recogonized the two tribes: (1) tribe Leptobrachiini sensuDubois, corresponding to the tadpole of type A, including four genera, i.e.,Leptobrachium, Oreolalax, Scutiger and, Vibrissaphora; (2) tribe Leptolalaxini,corresponding to the tadpole of novel type B, including two genera, i.e., Leptolalaxand Leptobrachella. However, the relationships among the genera of Megophryinaewere largely unresolved, they recognized no monophyletic groups above the generalevel. A more thorough sampling will likely foster a better taxonomic solution.3) The larval evolutionary scenario in Megophryidae.Type A is characteristicof normal-mouthed with multiple tooth rows, representing the tadpole type of theMRCA of Chinese megophryids. Type B is characteristic of normal-mouthed withreduced tooth rows, prolonging labium, and integumetary glands. Type C ischaracteristic of no labial teeth and smaller umbeliform oral disc. Type D ischaracteristic of no labial teeth, enlarged umbeliform oral disc, representing the tadpoleof the MRCA of subfamily Megophryinae. A previous hypothesis, referring tofunnel-shaped oral discs as an apomorphy, is supported.4) The larval adaptation to habitats in Megophryidae. Tadpoles generallyadhere to substrates using their mouths, and the microhabitat that the tadpoles occupyreflects the degree of adhesion and oral complexity. The morphological changes inmegophryid tadpoles virtually allow a progressive adaptation to a changing habitatfrom faster water to slower water. Within the tadpoles of Type A to type D, the TOTbecomes smaller and smaller, and the oral disc orientates from anteroventral toumbelliform upturned, and eye position orientates from dorsal to lateral, and the trunkis more and more depressed and tail becomes relatively longer and slender. Within therunning water, the normal-mouthed with multiple tooth rows of Leptobrachiini tadpoles are correlated with lotic-suctorial, benthic feeders with anteroventral oraldisc and the largest body. With the water’s velocity decreasing, the lotic-adherentfeeders of Leptolalax tadpoles have tube-shaped labium with reduced tooth rows andintegumetary glands. And then, the smaller umbeliform in Brachytarsophrys tadpolesand the enlarged umbeliform oral disc in the Megophryini tadpoles are inhabitmicrohabitats of non-flowing backwaters of rivers, indicative of adaptive traits oflotic-neustonic surface feeders. The scheme of megophryid tadpoles andmicrohabitats provided the first clear evidence which congruent with the hypothesis ofAltig and Johnston (1989). The ecological divergence plays a general role in thedivergence and evolution of megophrid larvae. There is a definite correlation amongthe buccopharyngeal cavity, diet and feeding mechanisms, the tadpole graze orswallow the food particles, then through papillae which like a sieve and sort out foodparticles to the oesophagus. The tadpole of Leptobrachiinae possess multiple toothrows, wide intertooth distance as well as thick and sparse jaw sheath, these tadpolesinhabit bottom of the streams and graze on epiphyton or major detritus of organicmatter on the substrates, their prelingual papillae like single finger, the mechanicalpurpose of papillae served share in by tooth and jaw. The tadpoles of Megophryinaeoccur near the water surface of small streams and are the filter feeder, their dietincludes plankton and organic debris floating on the water surface, those tadpolepossess weak jaw, their prelingual papillae like spoon, the mechanical purpose ofpapillae served mostly for sieve.

An untuned MA-loaded cavity for HIRFL-CSR

In order to realize high energy density physics and plasma physics research at HIRFL-CSR, a magnetic alloy (MA)-loaded cavity has been studied. According to the theoretical calculation and simulation for the MA-loaded cavity, we achieved a better result. The MA-loaded cavity had a higher Qf value, with a higher shunt impedance and a higher accelerating gradient. The accelerating gradient was about 95 kV/m at 1.8003 MHz, 130 kV/m at 0.9000 MHz. Compared with the ferrite-loaded cavities that are used at HIRFL-CSR, with about 10 kV/m accelerating gradient, the MA-loaded cavity obviously has an advantage. The results of the theoretical calculation and the simulation, which meet the design requirements are in good agreement.

突出电极对四杆型RFQ腔体并联阻抗及场平整性的影响；Influence of projecting electrodes on shunt impedance and flatness of 4-rod radiofrequency quadrupole cavity

中国科学院近代物理研究所正在进行等离子体直接注入方案的研究,以便为重离子物理研究提供稳定可靠的高流强束流。由于工作频率较低,用于等离子体直接注入方案的RFQ腔体采用了适合于低频的四杆型结构。在完成束流动力学设计的前提下,研究了RFQ腔体支撑臂的各参数对并联阻抗的影响。由于突出电极之间存在着一定大小的电容,会对腔体的性能产生影响,为使腔体达到最优化的设计,进行了突出电极对并联阻抗及场平整性的影响的研究,并给出了突出电极的取值范围。

Study of a magnetic alloy-loaded RF cavity for bunch compression at the CSR

The Heavy Ion Research Facility and Cooling Storage Ring (HIRFL-CSR) accelerator in Lanzhou offers a unique possibility for the generation of high density and short pulse heavy ion beams by non-adiabatic bunch compression longitudinally, which is implemented by a fast jump of the RF-voltage amplitude. For this purpose, an RF cavity with high electric field gradient loaded with Magnetic Alloy cores has been developed. The results show that the resonant frequency range of the single-gap RF cavity is from 1.13 MHz to 1.42 MHz, and a maximum RF voltage of 40 kV with a total length of 100 cm can be obtained, which can be used to compress heavy ion beams of U-238(72+) with 250 MeV/u from the initial bunch length of 200 ns to 50 ns with the coaction of the two single-gap RF cavity mentioned above.

Preliminary study of a niobium quarter-wave prototype cavity for a heavy-ion superconducting linac

Superconducting quarter-wave resonators, due to their compactness and their convenient shape for tuning and coupling, are very attractive for low-beta beam acceleration. In this paper, two types of cavities with different geometry have been numerically simulated: the first type with larger capacitive load in the beam line and the second type of lollipop-shape for 100 MHz, beta=0.06 beams; then the relative electromagnetic parameters and geometric sizes have been compared. It is found that the second type, whose structural design is optimized with the conical stem and shaping drift-tube, can support the better accelerating performance. At the end of the paper, some structural deformation effects on frequency shifts and appropriate solutions have been discussed.

An untuned MA-loaded cavity for HIRFL-CSR

In order to realize high energy density physics and plasma physics research at HIRFL-CSR, a magnetic alloy (MA)-loaded cavity has been studied. According to the theoretical calculation and simulation for the MA-loaded cavity, we achieved a better result. The MA-loaded cavity had a higher mu Q f value, with a higher shunt impedance and a higher accelerating gradient. The accelerating gradient was about 95 kV/m at 1.8003 MHz, 130 kV/m at 0.9000 MHz. Compared with the ferrite-loaded cavities that are used at HIRFL-CSR, with about 10 kV/m accelerating gradient, the MA-loaded cavity obviously has an advantage. The results of the theoretical calculation and the simulation, which meet the design requirements are in good agreement.

Study on shunt impedance and voltage distribution of 4-rod RFQ cavity

A high current RFQ (radio frequency quadrupole) is being studied at the Institute of Modern Physics, CAS for the direct plasma injection scheme. Shunt impedance is air important parameter when designing a 4-rod RFQ cavity, it reflects the RF efficiency of the cavity, and has a direct influence on the cost of the structure. Voltage distribution of a RFQ cavity has an effect on beam transmission, and particles would be lost if the actual voltage distribution is not as what, it should be. The influence of cell length, stern thickness and height on Shunt impedance and voltage distribution have been studied, in particular the effect of projecting electrodes has been investigated in detail.