6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning

[ES]Esta obra recoge las comunicaciones seleccionadas para el 6º Congreso Europeo sobre Eficiencia Energética y Sostenibilidad en Arquitectura, organizado por el grupo de investigación Calidad de Vida en Arquitectura de la Universidad del País Vasco/Euskal Herriko Unibertsitatea. El congreso, que se celebra en el marco de los XXXIV Cursos de Verano de la UPV/EHU, aborda en esta cuarta edición el tema “Ciudades en riesgo: resiliencia y redundancia”. Alrededor de este tema general se desarrollan cinco ponencias magistrales, a cargo de Margaretha Breil (Centro Euro-Mediterráneo para el Cambio Climático), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Ajuntament de Barcelona). Además, 24 comunicaciones seleccionadas por el comité científico presentarán trabajos de investigaciones actuales en las sesiones orales y póster. Es objetivo paralelo del congreso es fortalecer las líneas de investigación en eficiencia energética y sostenibilidad de los grupos de investigación y formación de la UPV/ EHU comprometidos con esta propuesta, con objeto de colaborar en el reforzamiento de la I D i en su ámbito de conocimiento y apoyar la apuesta específica de los Gobiernos Central y Vasco, así como de otras instituciones nacionales e internacionales respecto a las actividades de I D i en las materias relacionadas con el cambio climático, la eficiencia energética y la sostenibilidad ambiental [ENG] This work contains the selected abstracts of the 6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning, organized by the research group Quality of life in Architecture of the University of the Basque Country. The conference is part of the XXXIV Summer Courses of the UPV/EHU and deals, in its fourth edition, with the topic “Cities at risk: resilience and redundancy”. Around this general theme there are five invited speakers: Margaretha Breil (Euro-Mediterranean Centre for Climate Change), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Barcelona City Council). 24 abstracts additional have been selected by the scientific committee that offer actual research works in presentations and posters. The purpose of the conferences is to strengthen the investigation lines in energy efficiency and sustainability of the research and education groups of the University of the Basque Country (UPV/EHU) involved, with the purpose of collaborating in the reinforcement of the I D i in its field of knowledge, and support the specific projects of the Central and Basque Governments, as well as other national and international institutions related to the I Di activities in similar fields of climate change, energy efficiency and environmental sustainability.

Dokumentazioa Hego Euskal Herriko goi mailako irakaskuntzan, UPV/EHUtik abiatuta

Hego Euskal Herrian ez dago ikasketa edota diploma espezifikorik Dokumentazioan. Horrela bada ere, goi mailako irakaskuntza zentroetan ezagutza esparru hori hiru modutan txertatzen da. Lehenengo eta behin, titulazioetan ematen diren irakasgaietan aurkituko dugu. Lizentziaturei eta graduei dagokienez, oso presentzia txikia du, Komunikazio alorreko ikasketetan salbu; doktoregoko programetan, ordea, pisu nabarmenagoa hartzen du. Bigarren bidea, unibertsitateko bibliotekek ikasle zein irakasleentzat eskaintzen dituzten ikastaroak dira. Hirugarren eta azken bidea irakasleak prestatzeko egiturak dira, informazio- teknologien ingurukoak batik bat.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Historia del cuidado y del papel de la enfermería durante la Guerra Civil Española: España y País Vasco : revisión Bibliográfica

[Es]La labor cuidadora es conocida desde la antigüedad y así lo demuestran los estudios realizados. En el transcurso de la historia ha existido una evolución en el concepto de la salud-enfermedad. Y a su vez la enfermería ha sufrido trasformaciones importantes, situándose hoy en día en la posición en la que se la conoce. Diferentes acontecimientos favorecieron ésta evolución, como los conflictos bélicos. Por ello se realiza un estudio durante la Guerra Civil Española (1936-1939), para conocer la situación de la enfermería en la época, los cuidados que ofrecieron las/los enfermeras/os, la importancia de la colaboración social para la realización de estos cuidados y el consecuente beneficio de todo ello. Dedicando una sección al País vasco. Se realiza una revisión bibliográfica recurriendo principalmente a fuentes primarias para la obtención de documentación. Dando como resultado, un estudio histórico de carácter analítico-sintético. Se obtiene como resultado una visión global de la labor cuidadora de enfermeras/os, del voluntariado y de la ayuda internacional en el transcurso del conflicto. Destaca la importancia de la formación, la disciplina, los reglamentos y guías. Resulta imprescindible señalar el importante papel que desarrolló la Cruz Roja durante todo el conflicto. El conocimiento sobre el importante papel de la enfermería y los cuidados aplicados durante la guerra, contribuye a una reflexión personal de la importancia que éstas tuvieron, y demuestra la necesidad de una indagación más profunda y amplia.

Implementation of the nursing process in a health area: models and assessment structures used

Objective: to analyze what nursing models and nursing assessment structures have been used in the implementation of the nursing process at the public and private centers in the health area Gipuzkoa (Basque Country). Method: a retrospective study was undertaken, based on the analysis of the nursing records used at the 158 centers studied. Results: the Henderson model, Carpenito's bifocal structure, Gordon's assessment structure and the Resident Assessment Instrument Nursing Home 2.0 have been used as nursing models and assessment structures to implement the nursing process. At some centers, the selected model or assessment structure has varied over time. Conclusion: Henderson's model has been the most used to implement the nursing process. Furthermore, the trend is observed to complement or replace Henderson's model by nursing assessment structures.

Frame-level features conveying phonetic information for language and speaker recognition

150 p.

Análisis de la innovación tecnológica en las empresas del País Vasco

[ES]La innovación tecnológica es una estrategia por la que han apostado muchas de las empresas vascas en los últimos años, ya que aporta muchos beneficios tanto para las empresas, como para el sistema económico de la región. Además, las administraciones públicas han apoyado estas estrategias desde hace más de 30 años impulsando distintas medidas en cada fase. Con el fin de conocer cuál ha sido la evolución de la innovación tecnológica y su tendencia para los siguientes años, el presente trabajo analiza los factores relacionados con la innovación tecnológica en el País Vasco.

Propiedades básicas de materiales soporte y parámetros de control en biofiltración.

[ES]En la problemática medioambiental generada por la contaminación atmosférica hay tres aspectos que marcan las directrices de actuación institucional: la presión social, la legislación vigente y la tecnología disponible. En cuanto a este último aspecto, la biofiltración es una tecnología eficaz, asequible y sostenible basada en la actividad biodegradadora de microorganismos específicos adheridos a la superficie de un material soporte que constituye el lecho del biofiltro. La elección de un material soporte adecuado es de especial importancia para asegurar el correcto funcionamiento de los biofiltros. Esta decisión está basada en las propiedades intrínsecas del material que deben ser analizadas previamente a su uso. En este proyecto se ha seleccionado cuales son estas propiedades básicas a partir de una revisión bibliográfica, destacando la capacidad de retención de humedad, superficie específica, porosidad, y estabilidad física y química del material. En este trabajo, también se han fijado los parámetros de control que deben ser medidos de forma rutinaria en un biofiltro para asegurar la eficacia del tratamiento de descontaminación. En base a la información bibliográfica recopilada, se ha concluido que los parámetros básicos son pH, temperatura, contenido de humedad del lecho y pérdidas de carga. A nivel experimental, se han medido las pérdidas de carga generadas en biofiltros empacados con tres materiales soportes que son de especial interés para una investigación posterior a desarrollar por el grupo Biofiltración de la Universidad del País Vasco (UPV/EHU). Durante el período de arranque inicial de los tres biofiltros, las pérdidas de carga medidas fueron muy bajas en los tres casos, aunque algo superiores cuando la alimentación era en sentido ascendente frente al flujo descendente. Sin embargo, cuando se midieron las pérdidas de carga bajo condiciones de encharcamiento del lecho, que es una de las situaciones más problemáticas en un biofiltro, todos los soportes presentaron un aumento puntual de la pérdida de carga aunque la tendencia en los días posteriores fue claramente descendente, recuperando valores de operación habituales. La comparativa del comportamiento frente a las pérdidas de carga permitió seleccionar el soporte más idóneo de los tres analizados, aunque los otros dos podrían ser alternativas viables en caso de sustitución.

Reutilización de escoria negra de acería como soporte en biofiltros para la eliminación de H2S del biogás.

[EN]Due to the limitations associated with fossil fuels it is necessary to promote energy sources that are renewable as well as eco-friendly, such as biogas generated in anaerobic digesters. The biogas, composed principally of methane and CO2, is the result of the biodegradation of organic matter under anaerobic conditions. Its use as fuel is limited by the presence of minority compounds such as hydrogen sulphide (H2S); therefore, its pre-treatment is necessary. Currently there are various technologies for the removal of H2S from a gas stream, but most of them are based on physic-chemical treatments which have a number of drawbacks as reactive consumption, generation of secondary flows, etc. Biofiltration has been used as an efficient and low cost alternative to conventional purification processes, and excellent results for the degradation of H2S have been obtained. However process can be limited due to the progressive ageing of the support material, along with the loss of nutrients and other specific characteristics necessary for the good development of biomass. The purpose of this project is to develop a mixed support consisting of a mixture of an organic material and an inorganic support for its application in the removal of the H2S from biogas. This support material helps to optimize the characteristics of the bed and extend its lifespan. The development of such material will contribute to the implementation of biofiltration for treating biogas from anaerobic digesters for its use as biofuel. The inorganic material used is electric arc furnace (EAF) black slag, a by-product generated in large quantities in the production of steel in the Basque Country. Although traditionally the slag has been used in civil engineering, its physicochemical characteristics make it suitable for reuse as a filter medium in biofiltration. The main conclusion drawn from the experimental results is that EAF black slag is a suitable co-packing material in organic biofilters treating H2S-polluted gaseous streams. High pollutant removal rates have been achieved during the whole experimental period. The removal capacity recorded in biofilters with less inorganic material was higher than in those with higher slag portion. Nevertheless, all the biofilters have shown a satisfactory response even at high inlet loads (48 g·m-3·h-1), where the RE has not decreased over 82%.

Uncovering the role of free volume in biomaterials and biological matter

134 p.

Euskal herriko unibertsitatearen eragina spin-offen sortze- eta garapen-prozesuan

[EU]Enpresak sortzeko UPV/EHUko lehen programek eta programa horietatik sortutako lehen spin-offek hamabost urte baino gehiagoko ibilbidea egin dute jada. Denbora tarte horretan, hain zuzen, UPV/EHUtik hainbat spin-off sortu dira. Logikak agintzen duen moduan, enpresa bakoitzak garapen zehatza izan du, eta gaur egun bizi duen egoera bakarra da. Hala nola, enpresa bakoitzak unibertsitatearekin egun duen harremana ere desberdina da. Bada, ikerlan honen helburu nagusia da, alde batetik, UPV/EHUko egungo testuinguru ekintzailea aztertzea; eta bestetik, unibertsitateak spin-offen sorrera eta garapenean izan duen eragina ikertzea. Horretarako, enpresak sortzeko UPV/EHUko programaren baten babespean sortutako 40 spin-off aztertu dira, web formulario bidez bidalitako inkesta baten bitartez.

Euskal literatura Gernika aldizkari liberalean :1945-53

[EU]Liburuak erbesteratutako idazleen lanak aztertzen ditu, bereziki euskarazkoak. Gernika aldizkaria Gerra Zibiletik ihesi joandakoen biltokia izan zen Euskal Herrian. Aztertzen da modernitatea nola joan zen agertuz Gernika aldizkarian hiru belaunalditan, Octavio Pazen "Los hijos del limo" liburuko modernitatearen deskribapenaren laguntzaz. Horrez gain, aldizkariaren ibilbidea jasotzen da.

Desigualdad en la distribución de la renta en la Comunidad Autónoma del País Vasco. Análisis por comarcas (2001-2011)

[Es] Éste trabajo estudia la desigualdad en la distribución de la renta en la Comunidad Autónoma del País Vasco entre los años 2001 y 2011. Este periodo está dividido en dos sub-periodos, uno de bonanza económica entre 2001 y 2009 y otro de crisis económica y financiera entre 2009 y 2011. Se considera la renta disponible como variable y se toman los datos de UDALMAP y la encuesta de pobreza y desigualdades sociales (2012). Respaldado por un estudio teórico y referenciado de las herramientas para la medición de la desigualdad utilizadas en el trabajo, se analizan los estadísticos de los datos y se mide la distribución de la renta mediante el análisis de los principales y más reconocidos métodos para el estudio de la desigualdad como son la curva de Lorenz, el índice de Gini, la distribución inter-cuartil y el índice de Theil. Los resultados obtenidos indican que la desigualdad en la distribución de la renta en la CAPV (2001-2011) se ha reducido, si bien al analizar los sub-periodos no encontramos factores económicos o territoriales que expliquen con claridad las razones de la variación de la renta.

Las políticas tecnológicas y de innovación en la Comunidad Autónoma de Euskadi: El caso de los Clusters

[ES] En el presente trabajo se ha tratado de analizar la evolución de las políticas tecnológicas y de innovación en la Comunidad Autónoma de Euskadi (CAE), en las últimas tres décadas, prestando especial atención a la política de clusters. Es evidente el avance tecnológico e innovador experimentado por Euskadi en este período, basado en la estrecha cooperación desarrollada entre las universidades, las instituciones públicas y las empresas privadas. En este marco, la CAE fue pionera en el diseño y puesta en marcha de una política de clusters a principios de los años noventa. Tras más de dos décadas de funcionamiento de dicha política, ésta parece haberse consolidado existiendo en la actualidad 13 asociaciones cluster en Euskadi.

Análisis de dos economías de la Unión Europea: Alemania y España

CASTELLANO. Alemania, un país muy afectado tras el nazismo y las diferentes guerras en las cuales se vio involucrado, adoptó una Economía Social de Mercado (ESM) en 1948, que le permitió abrir sus puertas hacia la internacionalización, lo cual había estado fuertemente regulado hasta entonces. Esta apertura de fronteras ha favorecido al comercio exterior el cual está muy desarrollado. Además, una moderada inflación, un bajo nivel de deuda pública, alta cualificación de la población, el potente desarrollo industrial manufacturero y su capacidad de recuperación de la crisis económica que estalló en 2007, entre otros, hace de Alemania un país muy próspero. España, tras su recuperación de la época del franquismo la cual había castigado de forma severa a este país, se recuperó hasta niveles superiores a Alemania en cuestión de confianza empresarial. En cambio, en 2007, momento de estallido de crisis, la producción de varios sectores se vio muy reducida (principalmente el sector de la construcción), la tasa de desempleo aumentó de forma descontrolada… Actualmente, este país se encuentra en proceso de recuperación el cual se basa mucho en el turismo y por consiguiente en el sector servicios que año tras año ha ido evolucionando hasta convertirse en uno de los motores de esta economía.