The future of shrimp processing industry in India

The future of the shrimp industry in India depends entirely on our export markets. Therefore the future of the industry must be related to the demand for shrimps in foreign markets. The most important market today for India is the United States. In the United States the domestic production of shrimps which was about 112 million pounds in 1950 has increased only slightly to 139.6 million pounds in 1965. However the consumption during the same period increased from 119.5 million pounds to 274.2 million pounds - the gap between home production and consumption is made up by imports.

Recent developments in fish processing and preservation

A review of the literature on fish processing will reveal that most of the important developments have taken place during the last twenty years. Sustained work by teams of scientists in different parts of the world, has not only contributed much to our knowledge of the chemistry and technology of fish but also resulted in revolutionary changes in the methods of preservation and processing of fishery products.

A study on the quality of prawns during processing in prawn-freezing factories

A study on the occurrence of defective pieces of prawns at three different stages of processing of headless shell on and peeled and deveined varieties was undertaken, each in one freezing factory. The average percentages of the defective prawns together with the standard deviation observed over a period of one year at the three stages are mentioned. Correlation is indicated between the occurrence of the defective pieces at the pre-freezing stage and those of earlier stages.

Studies on technological problems associated with the processing of cooked frozen prawns. Pt. 1. Preprocess storage conditions of raw material in relation to quality

The chemical and organoleptic properties of prawn held in ice for different days prior to cooking and the changes after freezing and subsequent storage were studied with three different species of prawn viz. Metapenaeus monoceros, Metapenaeus dobsoni and Parapeneopsis stylifera. The optimum period for which the prawn can be kept under ideal conditions of icing prior to cooking has been worked out.

Studies on technological problems associated with the processing of cooked frozen prawns. Pt. 2. Hygienic conditions in relation to bacteriological characteristics

The importance of sanitary practices in the processing of precooked frozen shrimps has been discussed. Several typical examples have been shown to point out the different sources of contamination of the product and the extent to which each of the factors by itself or in combination affect the bacterial quality of the final product. A scheme of processing has also been suggested for controlling the microbial quality.

Technological aspects of processing of edible mussels, clams and crabs. Pt. 1. Spoilage during ice storage

Rate and pattern of spoilage of some of the economically important edible species of shell fishes Mytilus edulis (Mussel), Villorita cornucopia (Clam), Neptunus pelagicus (Crab) and Scylla serrata (Crab) have been discussed in this communication. Chemical indices used for objective evaluation of quality were water extractable nitrogen (WEN), non-protein nitrogen (NPN), free α-amino nitrogen (α - NH2 -N), glycogen, lactic acid and inorganic phosphorus in addition to the subjective tests. No significant difference in the spoilage pattern of the species during ice storage was observed and these species could be preserved in ice in organoleptic acceptable condition up to 8 days, 9 days, 8 days and 11 days respectively.

The processing of fish and other marine resources

The preservation of freshness in fish (commonly referred to as fish handling) and the conversion of fresh fish into other products can both be considered as methods of processing. In commercial practice, however, the term "processing" is confined to the conversion of fresh fish into other products.

Socio-cultural influences on sanitation, fish handling and artisanal fish processing within the fishing communities

The fishery sector in Uganda has seen important changes in the last two decades. Among the changes registered, is the expansion of fish markets locally, regionally and internationally. Upon which, remarkable benefits have been realized at local and national levels, for instance, it is estimated that an average of 40m$ is being earned annually as foreign exchange. Besides, presently fish accounts for over 50% of total animal protein in take. However, it is argued that sustaining these gains has become an up hill task due to failure to maintain fish quality as a result of the rudimentary and inappropriate sanitary, fish handling and artisanal fish processing practices that both directly and indirectly affect the quality of fish and fish products. Therefore, against this background, a study of 507 respondents was undertaken among the Lake Victoria Communities specifically in Wakiso, Mayuge and Mukono districts. The study examined the perceptions of fishers on the social cultural practices of sanitation, fish handling and artisanal fish processing and consequently identified factors that influenced these practices.

Sanitation, fish handling and artisanal fish processing within fishing communities: socio-cultural influences

postive transformation of the fisheries sector in Uganda has of recent been scatted by failure to mountain fish quality and safety,akey prerequiste for retaining and gaining fish markets. The social cultural study established the extent to which social cutural practices had affected the levels and the use of sanitation facilities,fish handling facilities and artisanal fish processing techniques and the factors that influenced these practices in the fishing communities of lake victoria. This information is of significance for the purpose of advocacy and mobilization of fishers in order to improve sanitation, fish handling and artisanal fishing processing situation in the fishing communities.

Processing and marketing of fish with special reference to export of pelagic fish and fish products

The paper describes the world tuna fishery, industry and markets and the trends for its future development. The prospects for developing a tuna export industry in Sri Lanka are discussed. Suggestions are given as to products composition, international co-operation and utilization of available processing facilities. The need for industry and export support is stressed, and it is concluded that preparations for the development should start well in time.

De-scummer for beche-de-mer processing

An improved method for processing sea cucumber (beche-de-mer) is described. Details of a machine named de-scummer are presented. The traditional method for preparation is discussed, and the new method outlined; this involves burying boiled sea cucumber in clean sand contained in cement pits for periods of 6-8 h. The animals are then transferred to the de-scummer for mechanical treatment and are boiled again. After this they are dried.

Statistical quality control charts on attributes in fish processing technology

Apart from the use of statistical quality control chart for variables or attributes of food products in a food processing industry, the application of these charts for attributes of fishery products is explained. Statistical quality control chart for fraction defectives is explained by noting defective fish sausages per shift from a sausage industry while control chart for number of defectives is illustrated for number of defective fish cans in each hour of its production of a canning industry. C-chart is another type of control chart which is explained here for number of defects per single fish fillet sampled a1l random for every five minutes in a processing industry. These statistical quality control charts help in the more economic use of resource, time and labour than control charts for variables of products. Also control charts for attributes exhibit the quality history of finished products at different times of production thereby minimizing the risk of consumer rejection.

Observations on the wastage of raw material and recovery of meat in the prawn processing industry

The wastage of prawns due to spoilage in processing factories accounted to about 0-12% in 1974, 0-35% in 1975, 0-3% in 1976 and 0-4% in 1977. Spoilage increases with the time lag between catching and processing and also due to defective icing. The paper discusses the counts of whole prawns required for obtaining meat of specified size grades.

Physics in fish processing technology

To design, develop and put into operation an equipment either to increase the productivity or to improve the existing technique to obtain a better quality of the product, the fishery engineer/scientist should have a comprehensive knowledge of fundamental principles involved in the process. Many a technique in fish processing technology, whether it applies to freezing, dehydration or canning, involves always a type of heat transfer, which is dependent to a certain extent on the external physical parameters like temperature. humidity, pressure, air flow etc. and also on the thermodynamic properties of fish muscle in the temperature ranges encountered. Similarly informations on other physical values like dielectric constant and dielectric loss in the design of quick trawlers and in quality assessment of frozen/iced fish, refractive index and viscosity in the measurement of the saturation and polymerisation of fish oils and shear strength in the judgement of textural qualities of cooked fish are also equally important.

Technological aspects of preservation and processing of edible shell fish 2. Influence of season on the chemical composition of crab (Scylla serrata)

The purpose of this communication is to bring out the influence of season on the chemical composition of crab, covering a period of 2 years. Changes in moisture, protein, water extractable nitrogen, non-protein nitrogen, glycogen, lactic acid, fat and free amino acid composition of crab meat have been reported on a monthly basis.